Search

In this paper, the design and performance of class \E^2 resonant topologies for dc/dc power conversion at UHFs are considered. Combining the use of RF gallium–nitride HEMT devices, both for the inverter and synchronous rectifier, with high-Q lumped-element terminating networks, peak efficiency values over 70% may be obtained. Control strategies based on carrier bursting, switching frequency modulation, or outphasing are also shown to be feasible. Taking advantage of their improved dynamic response, when compared to low-frequency more traditional switched-mode converters, a class \E^3 polar transmitter for the EDGE standard has been designed and tested at 770 MHz, offering an average global efficiency over 46% at 4.3 W of output power, through RF-based amplitude and phase constituting branches. Finally, the potential of such a high frequency of operation in terms of power density is explored, absorbing undesired coil parasitics for the original LC series interconnecting network in a 1-GHz design methodology. [ABSTRACT FROM AUTHOR]

Spectrally efficient wireless communication standards impose stringent linearity specifications, which would require traditional IQ transmitters to operate with back-offed and power inefficient linear RF power amplifiers (PAs). In order to overcome such a significant limitation, alternative architectures have been proposed, as those based on the envelope elimination and restoration technique. An example of the application of this technique is the polar transmitter. In this paper, a UHF polar transmitter is presented, combining switching and linear stages in the envelope amplifier as to achieve both wide bandwidth and high efficiency, when drain modulating a GaN HEMT Class E RF PA. Several tests, using EDGE, TETRA, and WCDMA standards have been performed with good results. [ABSTRACT FROM AUTHOR]