Search

The retrieval of soil moisture (SM) using the Global Navigation Satellite System-Reflectometry (GNSS-R) technique has become a prominent topic in recent years. Although prior research has reached a spatial resolution of up to 9 km through the Cyclone Global Navigation Satellite System (CYGNSS), it is insufficient to meet the requirements of higher spatial resolutions for hydrological or agricultural applications. In this paper, we present an SM downscaling method that fuses CYGNSS and SMAP SM. This method aims to construct a dataset of CYGNSS observables, auxiliary variables, and SMAP SM (36 km) products. It then establishes their nonlinear relationship at the same scale and finally builds a downscale retrieval model of SM using the eXtreme Gradient Boosting (XGBoost) algorithm. Focusing on the southern United States, the results indicate that the SM downscaling method exhibits robust performance during both the training and testing processes, enabling the generation of a CYGNSS SM product with a 1 day/3 km resolution. Compared to existing methods, the spatial resolution is increased threefold. Furthermore, in situ sites are utilized to validate the downscaled SM, and spatial correlation analysis is conducted using MODIS EVI and MODIS ET products. The CYGNSS SM obtained by the downscaling model exhibits favorable correlations. The high temporal and spatial resolution characteristics of GNSS-R are fully leveraged through the downscaled method proposed. Furthermore, this work provides a new perspective for enhancing the spatial resolution of SM retrieval using the GNSS-R technique. [ABSTRACT FROM AUTHOR]

Global Navigation Satellite System interferometric reflectometry (GNSS-IR), as a new remote sensing detection technology, can retrieve surface soil moisture (SM) by separating the modulation terms from the effective signal-to-noise ratio (SNR) data. However, traditional low-order polynomials are prone to over-fitting when separating modulation terms. Moreover, the existing research mainly relies on prior information to select satellites for SM retrieval. Accordingly, this study proposes a method based on empirical modal decomposition (EMD) and cross-correlation satellite selection (CCSS) for SM retrieval. This method intended to adaptively separate the modulation terms of SNR through the combination of EMD and an intrinsic mode functions (IMF) discriminant method, then construct a CCSS method to select available satellites, and finally establish a multisatellite robust estimation regression (MRER) model to retrieve SM. The results indicated that with EMD, the different feature components implied in the SNR data of different satellites could be adaptively decomposed, and the trend and modulation terms of the SNR could more accurately be acquired by the IMF discriminant method. The available satellites could be efficiently selected through CCSS, and the SNR quality of different satellites could also be classified at different accuracy levels. Furthermore, MRER could fuse the multisatellite phases well, which enhanced the accuracy of SM retrieval and further verified the feasibility and effectiveness of combining EMD and CCSS. When r m = 0.600 and r n = 0.700 , the correlation coefficient (r) of the multisatellite combination reached 0.918, an improvement of at least 40% relative to the correlation coefficient of a single satellite. Therefore, this method can improve the adaptive ability of SNR decomposition, and the selection of satellites has high flexibility, which is helpful for the application and popularization of the GNSS-IR technology. [ABSTRACT FROM AUTHOR]

• Using the coif5 wavelet can effectively separate the trend and modulation terms in the SNR. • A method combining IQR and MAF to detect and repair abnormal phases is proposed. • The effect of different satellite combination patterns on soil moisture retrieval is analyzed. • The MSLR model can accurately grasp the change in soil moisture at different monitoring times. Signal-to-noise ratio (SNR) data received with standard geodetic instrumentation can be used to retrieve near-surface soil moisture (SM). However, low-quality SNR data usually cause abnormal phases in the fitting of nonlinear least squares (LLS) algorithms. This is not conducive to the effective use of multisatellite phases. In this paper, an SM retrieval method based on multisatellite combinations considering the detection and repair of abnormal phases is proposed. This method is aimed at using wavelet transform to separate the trend and modulation terms in SNR data, followed by detecting and repairing the abnormal phase for all satellites, finally constructing the multisatellite linear regression (MSLR) model for SM retrieval, and analysing the variation of accuracy with the increase of model testing days. The results indicate that with the coif5 wavelet, the trend and modulation terms of the SNR (compared to the traditional low-order polynomial) can be better separated. The abnormal phases can effectively be detected and repaired by combining the interquartile range and moving average filter, and further, the quality of the phases for each satellite can be improved. Furthermore, MSLR can fully combine the multisatellite phases to improve the accuracy of SM retrieval, and it is suitable for SM retrieval over different time periods. [ABSTRACT FROM AUTHOR]

Soil moisture (SM), as one of the crucial environmental factors, has traditionally been estimated using global navigation satellite system interferometric reflectometry (GNSS-IR) microwave remote sensing technology. This approach relies on the signal-to-noise ratio (SNR) reflection component, and its accuracy hinges on the successful separation of the reflection component from the direct component. In contrast, the presence of carrier phase and pseudorange multipath errors enables soil moisture retrieval without the requirement for separating the direct component of the signal. To acquire high-quality combined multipath errors and diversify GNSS-IR data sources, this study establishes the dual-frequency pseudorange combination (DFPC) and dual-frequency carrier phase combination (L4) that exclude geometrical factors, ionospheric delay, and tropospheric delay. Simultaneously, we propose two methods for estimating soil moisture: the DFPC method and the L4 method. Initially, the equal-weight least squares method is employed to calculate the initial delay phase. Subsequently, anomalous delay phases are detected and corrected through a combination of the minimum covariance determinant robust estimation (MCD) and the moving average filter (MAF). Finally, we utilize the multivariate linear regression (MLR) and extreme learning machine (ELM) to construct multi-satellite linear regression models (MSLRs) and multi-satellite nonlinear regression models (MSNRs) for soil moisture prediction, and compare the accuracy of each model. To validate the feasibility of these methods, data from site P031 of the Plate Boundary Observatory (PBO) H2O project are utilized. Experimental results demonstrate that combining MCD and MAF can effectively detect and correct outliers, yielding single-satellite delay phase sequences with a high quality. This improvement contributes to varying degrees of enhanced correlation between the single-satellite delay phase and soil moisture. When fusing the corrected delay phases from multiple satellite orbits using the DFPC method for soil moisture estimation, the correlations between the true soil moisture values and the predicted values obtained through MLR and ELM reach 0.81 and 0.88, respectively, while the correlations of the L4 method can reach 0.84 and 0.90, respectively. These findings indicate a substantial achievement in high-precision soil moisture estimation within a small satellite-elevation angle range. [ABSTRACT FROM AUTHOR]

The frequent occurrence and spread of wildfires pose a serious threat to the ecological environment and urban development. Therefore, assessing regional wildfire susceptibility is crucial for the early prevention of wildfires and formulation of disaster management decisions. However, current research on wildfire susceptibility primarily focuses on improving the accuracy of models, while lacking in-depth study of the causes and mechanisms of wildfires, as well as the impact and losses they cause to the ecological environment and urban development. This situation not only increases the uncertainty of model predictions but also greatly reduces the specificity and practical significance of the models. We propose a comprehensive evaluation framework to analyze the spatial distribution of wildfire susceptibility and the effects of influencing factors, while assessing the risks of wildfire damage to the local ecological environment and urban development. In this study, we used wildfire information from the period 2013–2022 and data from 17 susceptibility factors in the city of Guilin as the basis, and utilized eight machine learning algorithms, namely logistic regression (LR), artificial neural network (ANN), K-nearest neighbor (KNN), support vector regression (SVR), random forest (RF), gradient boosting decision tree (GBDT), light gradient boosting machine (LGBM), and eXtreme gradient boosting (XGBoost), to assess wildfire susceptibility. By evaluating multiple indicators, we obtained the optimal model and used the Shapley Additive Explanations (SHAP) method to explain the effects of the factors and the decision-making mechanism of the model. In addition, we collected and calculated corresponding indicators, with the Remote Sensing Ecological Index (RSEI) representing ecological vulnerability and the Night-Time Lights Index (NTLI) representing urban development vulnerability. The coupling results of the two represent the comprehensive vulnerability of the ecology and city. Finally, by integrating wildfire susceptibility and vulnerability information, we assessed the risk of wildfire disasters in Guilin to reveal the overall distribution characteristics of wildfire disaster risk in Guilin. The results show that the AUC values of the eight models range from 0.809 to 0.927, with accuracy values ranging from 0.735 to 0.863 and RMSE values ranging from 0.327 to 0.423. Taking into account all the performance indicators, the XGBoost model provides the best results, with AUC, accuracy, and RMSE values of 0.927, 0.863, and 0.327, respectively. This indicates that the XGBoost model has the best predictive performance. The high-susceptibility areas are located in the central, northeast, south, and southwest regions of the study area. The factors of temperature, soil type, land use, distance to roads, and slope have the most significant impact on wildfire susceptibility. Based on the results of the ecological vulnerability and urban development vulnerability assessments, potential wildfire risk areas can be identified and assessed comprehensively and reasonably. The research results of this article not only can improve the specificity and practical significance of wildfire prediction models but also provide important reference for the prevention and response of wildfires. [ABSTRACT FROM AUTHOR]

The global navigation satellite system–interferometric reflectometry (GNSS-IR) technique has emerged as an effective coastal sea-level monitoring solution. However, the accuracy and stability of GNSS-IR sea-level estimation based on quadratic fitting are limited by the retrieval range of reflector height (RH range) and satellite-elevation range, reducing the flexibility of this technology. This study introduces a new GNSS-IR sea-level estimation model that combines local mean decomposition (LMD) and Lomb–Scargle periodogram (LSP). LMD can decompose the signal-to-noise ratio (SNR) arc into a series of signal components with different frequencies. The signal components containing information from the sea surface are selected to construct the oscillation term, and its frequency is extracted by LSP. To this end, observational data from SC02 sites in the United States are used to evaluate the accuracy level of the model. Then, the performance of LMD and the influence of noise on retrieval results are analyzed from two aspects: RH ranges and satellite-elevation ranges. Finally, the sea-level variation for one consecutive year is estimated to verify the stability of the model in long-term monitoring. The results show that the oscillation term obtained by LMD has a lower noise level than other signal separation methods, effectively improving the accuracy of retrieval results and avoiding abnormal values. Moreover, it still performs well under loose constraints (a wide RH range and a high-elevation range). In one consecutive year of retrieval results, the new model based on LMD has a significant improvement effect over quadratic fitting, and the root mean square error and mean absolute error of retrieval results obtained in each month on average are improved by 8.34% and 8.87%, respectively. [ABSTRACT FROM AUTHOR]