Search

Currently, new functional materials are being created with a strong emphasis on their ecological aspect. Materials and devices based on DNA biopolymers, being environmentally friendly, are therefore very interesting from the point of view of applications. In this paper, we present the results of research on complexes in the powder form based on plasmid DNA (pDNA) and three surfactants with aliphatic chains containing 16 carbon atoms (cetyltrimethylammonium chloride, benzyldimethylhexadecylammonium chloride and hexadecylpyridinium chloride). The X-ray diffraction results indicate a local hexagonal packing of DNA helices in plasmid DNA complexes, resembling the packing for corresponding complexes based on linear DNA. Based on the Fourier-transform infrared spectroscopy results, the DNA conformation in all three complexes was determined as predominantly of A-type. The two relaxation processes revealed by dielectric spectroscopy for all the studied complexes are connected with two different contributions to total conductivity (crystallite part and grain boundaries). The crystallite part (grain interior) was interpreted as an oscillation of the polar surfactant head groups and is dependent on the conformation of the surfactant chain. The influence of the DNA type on the properties of the complexes is discussed, taking into account our previous results for complexes based on linear DNA. We showed that the type of DNA has an impact on the properties of the complexes, which has not been demonstrated so far. It was also found that the layer of pDNA–surfactant complexes can be used as a layer with variable specific electric conductivity by selecting the frequency, which is interesting from an application point of view. [ABSTRACT FROM AUTHOR]

Due to its high electron affinity and electron mobility in a wide absorption range of the visible solar spectrum, [6,6]-phenyl-C71-butyric acid methyl ester (PC71BM) is often used as an efficient acceptor in organic photovoltaics. In turn, imines are additives to the active layer of organic solar cells, mainly due to the free electron pair of the imine nitrogen atom and the presence of various chemical groups affecting the polarity and conformations of molecules. However, the attainable efficiency is not as high as expected. Therefore, we have systematically investigated two imines and their mixtures with PC71BM by spectroscopic (the high pressure UV–Vis and frequency domain dielectric), thermoelectric, and mechanical methods for organic, flexible photovoltaics. Both the imines, (N,NʹE,N,NʹE)-N,Nʹ-([2,2ʹ:5ʹ,2ʺ-terthiophene]-5,5ʺ-diylbis(methanylylidene))bis(benzo[d]thiazol-2-imine) (SC3) and (6E)-N-((5-(5-(5-((E)-(4-(4-(4-fluorophenyl)thiazol-2-yl)phenylimino)methyl)thiophen-2-yl)thiophen-2-yl)thiophen-2-yl)methylene)-4-(4-(4-fluorophenyl)thiazol-2-yl)benzenamine (SC13), have the same core composed of three thiophene rings but different terminal chains of the molecules. In the imine SC3, the imine bond is followed by benzothiazole rings on both sides of the core, while in SC13, a thiazole ring separates two benzene rings, the terminal one F-substituted. The difference in molecular structure affects the electric properties of the neat imine and its mixed layers. An addition of PC71BM to the imines improves their electric conductivity. The mechanical studies focused on the stress at break and elongation showed superior behaviour compared to fullerene derivative. High pressure systematically reduces the band gap energy, Eg, from 1.68 eV at 0.16 GPa to 1.51 eV at 2.69 GPa for PC71BM, from 1.77 eV at 0.1 MPa to 1.53 eV at 4.15 GPa for SC3, and from 1.99 eV at 0.11 GPa to 1.8 eV at 3.10 GPa for SC13, as determined by the UV–Vis absorbance measurements in a diamond-anvil cell. These Eg reductions reflect the compressed intermolecular interactions that can be used to monitor the structural stability of these compounds. Based on the dielectric studies it was found that the relaxation processes registered for both imines are probably the grain boundary relaxation. Two processes also appear in the systems with PC71BM, but none of them is the one characteristic of imines. The high-frequency process has a dipole character while the low-frequency one is probably the grain boundary relaxation of these systems. The mechanism of quasi-DC conduction in various temperature ranges in the studied systems was also determined. [ABSTRACT FROM AUTHOR]

Due to its high electron affinity and electron mobility in a wide absorption range of the visible solar spectrum, [6,6]-phenyl-C71-butyric acid methyl ester (PC71BM) is often used as an efficient acceptor in organic photovoltaics. In turn, imines are additives to the active layer of organic solar cells, mainly due to the free electron pair of the imine nitrogen atom and the presence of various chemical groups affecting the polarity and conformations of molecules. However, the attainable efficiency is not as high as expected. Therefore, we have systematically investigated two imines and their mixtures with PC71BM by spectroscopic (the high pressure UV–Vis and frequency domain dielectric), thermoelectric, and mechanical methods for organic, flexible photovoltaics. Both the imines, (N,NʹE,N,NʹE)-N,Nʹ-([2,2ʹ:5ʹ,2ʺ-terthiophene]-5,5ʺ-diylbis(methanylylidene))bis(benzo[d]thiazol-2-imine) (SC3) and (6E)-N-((5-(5-(5-((E)-(4-(4-(4-fluorophenyl)thiazol-2-yl)phenylimino)methyl)thiophen-2-yl)thiophen-2-yl)thiophen-2-yl)methylene)-4-(4-(4-fluorophenyl)thiazol-2-yl)benzenamine (SC13), have the same core composed of three thiophene rings but different terminal chains of the molecules. In the imine SC3, the imine bond is followed by benzothiazole rings on both sides of the core, while in SC13, a thiazole ring separates two benzene rings, the terminal one F-substituted. The difference in molecular structure affects the electric properties of the neat imine and its mixed layers. An addition of PC71BM to the imines improves their electric conductivity. The mechanical studies focused on the stress at break and elongation showed superior behaviour compared to fullerene derivative. High pressure systematically reduces the band gap energy, Eg, from 1.68 eV at 0.16 GPa to 1.51 eV at 2.69 GPa for PC71BM, from 1.77 eV at 0.1 MPa to 1.53 eV at 4.15 GPa for SC3, and from 1.99 eV at 0.11 GPa to 1.8 eV at 3.10 GPa for SC13, as determined by the UV–Vis absorbance measurements in a diamond-anvil cell. These Eg reductions reflect the compressed intermolecular interactions that can be used to monitor the structural stability of these compounds. Based on the dielectric studies it was found that the relaxation processes registered for both imines are probably the grain boundary relaxation. Two processes also appear in the systems with PC71BM, but none of them is the one characteristic of imines. The high-frequency process has a dipole character while the low-frequency one is probably the grain boundary relaxation of these systems. The mechanism of quasi-DC conduction in various temperature ranges in the studied systems was also determined. [ABSTRACT FROM AUTHOR]

Due to its high electron affinity and electron mobility in a wide absorption range of the visible solar spectrum, [6,6]-phenyl-C71-butyric acid methyl ester (PC71BM) is often used as an efficient acceptor in organic photovoltaics. In turn, imines are additives to the active layer of organic solar cells, mainly due to the free electron pair of the imine nitrogen atom and the presence of various chemical groups affecting the polarity and conformations of molecules. However, the attainable efficiency is not as high as expected. Therefore, we have systematically investigated two imines and their mixtures with PC71BM by spectroscopic (the high pressure UV–Vis and frequency domain dielectric), thermoelectric, and mechanical methods for organic, flexible photovoltaics. Both the imines, (N,NʹE,N,NʹE)-N,Nʹ-([2,2ʹ:5ʹ,2ʺ-terthiophene]-5,5ʺ-diylbis(methanylylidene))bis(benzo[d]thiazol-2-imine) (SC3) and (6E)-N-((5-(5-(5-((E)-(4-(4-(4-fluorophenyl)thiazol-2-yl)phenylimino)methyl)thiophen-2-yl)thiophen-2-yl)thiophen-2-yl)methylene)-4-(4-(4-fluorophenyl)thiazol-2-yl)benzenamine (SC13), have the same core composed of three thiophene rings but different terminal chains of the molecules. In the imine SC3, the imine bond is followed by benzothiazole rings on both sides of the core, while in SC13, a thiazole ring separates two benzene rings, the terminal one F-substituted. The difference in molecular structure affects the electric properties of the neat imine and its mixed layers. An addition of PC71BM to the imines improves their electric conductivity. The mechanical studies focused on the stress at break and elongation showed superior behaviour compared to fullerene derivative. High pressure systematically reduces the band gap energy, Eg, from 1.68 eV at 0.16 GPa to 1.51 eV at 2.69 GPa for PC71BM, from 1.77 eV at 0.1 MPa to 1.53 eV at 4.15 GPa for SC3, and from 1.99 eV at 0.11 GPa to 1.8 eV at 3.10 GPa for SC13, as determined by the UV–Vis absorbance measurements in a diamond-anvil cell. These Eg reductions reflect the compressed intermolecular interactions that can be used to monitor the structural stability of these compounds. Based on the dielectric studies it was found that the relaxation processes registered for both imines are probably the grain boundary relaxation. Two processes also appear in the systems with PC71BM, but none of them is the one characteristic of imines. The high-frequency process has a dipole character while the low-frequency one is probably the grain boundary relaxation of these systems. The mechanism of quasi-DC conduction in various temperature ranges in the studied systems was also determined. [ABSTRACT FROM AUTHOR]

[Display omitted] Hypothesis: Sildenafil base and bosentan monohydrate are co-administered in a chronic therapy of pulmonary arterial hypertension (PAH). Both drugs are poorly soluble in water, and their bioavailability is limited to ca. 50 %. Since bosentan is a weak acid, whereas sildenafil is a weak base, we assumed that their co-amorphization could: (i) improve their solubility in the gastrointestinal fluids, (ii) enable to reach supersaturation and (iii) ensure stabilization of supersaturated solutions. If successful, this could accelerate the development of new fixed-dose combination drugs. Experiments: The co-amorphous formulations were prepared using high energy ball milling. Their solid state properties were assessed using XRD, DSC, FT-MIR, and dielectric spectroscopy. Particle size distribution and surface wetting were also analyzed. Polarizing optical microscopy and scanning electron microscopy were applied to assess the microstructure of these powders. A new HPLC-DAD method was developed for a simultaneous quantification of both drugs. Findings: It was shown that binary formulations in which bosentan was molecularly dispersed in sildenafil base (Tg = 64-78 °C) could be manufactured in the high energy ball milling process. When the sildenafil load was below 50 wt. %, the formulations showed the greatest thermal stability and formed long-lasting bosentan supersaturation in PBS. [ABSTRACT FROM AUTHOR]

Modification of the physical properties of the (S)-MHPOBC antiferroelectric liquid crystal (AFLC) by doping with low concentrations of gold nanoparticles is presented for the first time. We used several complementary experimental methods to determine the effect of Au nanoparticles on AFLC in the metal–organic composites. It was found that the dopant inhibits the matrix crystallization process and modifies the phase transitions temperatures and switching time, as well as increases the helical pitch and spontaneous polarization, while the tilt angle slightly changes. We also showed that both the LC matrix and Au nanoparticles show strong fluorescence in the green light range, and the contact angle depends on the temperature and dopant concentration. [ABSTRACT FROM AUTHOR]

[Display omitted] • Application of poly(4-vinyl pyridine) layers cross-linked with transition metal complexes as active layers in biomedical sensors. • Sensitivity of the coatings to the presence of proteins and cells in different concentrations verified by impedance spectroscopy. • Different detection limits for different transition metals. • High selectivity of the coatings toward the defined analyte confirmed by the specific antigen–antibody immunoreaction. • Conductive response of a bilayer system that mimics Organic Field Effect Transistor. The possibility of application of poly(4-vinyl pyridine) layers cross-linked with transition metal complexes as active layers in biomedical sensors was tested. The successful modification of the P4VP coating with CuBr 2 or ZnBr 2 was verified using time of flight - secondary ion mass spectrometry and X-ray photoelectron spectroscopy. The topography and wettability of the coatings were examined by using atomic force microscopy and water contact angles measurements, respectively. Tests of biological activity of coatings indicated strong protein adsorption, good biocompatibility, and no antimicrobial activity. The potential of the coatings to be used as active layers of biosensors was verified, by systematic impedance-based measurements, which showed the sensitivity of the P4VP:CuBr 2 coatings to the presence of proteins and cells in different concentrations. The high selectivity of the coatings toward the defined analyte was confirmed by the specific antigen–antibody immunoreaction, and the possibility of in situ monitoring of protein adsorption and cell adhesion also for individual cells was presented. Finally, the conductive response of a bilayer system that mimics Organic Field Effect Transistor was shown. These results point to a great potential for both coatings to serve as active layers of sensitive and highly selective biosensors. [ABSTRACT FROM AUTHOR]

[Display omitted] • Secondary amino groups in polyhydroxyurethanes strengthen hydrogen bonding. • This is due to formation of double hydrogen-bonded carbonyls over single bonded ones. • This correlates strongly with materials state, molecular mobility, and mechanical properties. A series of linear non-isocyanate polyhydroxyurethanes (NIPUs) were synthesized by aminolysis of a PPO bis-cyclic carbonate with two diamines, one of which (triethylenetetramine, TETA) contains non-reacting secondary amino groups. Thus, varying the composition of the diamine component modulates the density of proton donors. Fourier Transform Infrared Spectroscopy (FTIR) showed that with increasing TETA content in the amine components (20–100 wt%) carbonyl groups tend to form progressively more double hydrogen bonds (HBs). Interestingly, the system without this amine deviates from the trend. In the whole composition range, a higher amount of double HBs correlates monotonously with reduced molecular mobility as observed by differential scanning calorimetry (DSC), dielectric relaxation spectroscopy (DRS), and dynamic mechanical analysis (DMA). It also correlates with the mechanical properties of studied NIPUs which range at room temperature from a viscous liquid to a dimensionally stable, flexible, and durable elastomer, depending on the density of double hydrogen-bonded carbonyls. Hence, the herein proposed approach allows for tailoring thermomechanical properties of NIPUs by modulating density of double hydrogen-bonded carbonyls. [ABSTRACT FROM AUTHOR]

Abstract Physical properties of new binary mixture of two ferroelectric liquid crystalline compounds, regarding the properties of the components, were studied. It turned out that both components and the mixture exhibit the ferroelectric smectic C* phase in a wide temperature range. Moreover, the calorimetric, texture observations as well as dielectric studies revealed an additional monotropic liquid crystalline phase for one of the mixture component, which was identified, based on X–ray diffraction results, as tilted one with hexagonal order within the layers. Dielectric spectroscopy has shown the strong low frequency relaxation process in the SmC* identified as related to Goldstone mode based on the mean–field model. Additionally, the molecular reorientation around the short axis was recognized in the monotropic hexatic phase. The temperature dependencies of the spontaneous polarization and switching time for new binary mixture and its components were compared and analyzed in terms for possible applications. Graphical abstract Unlabelled Image Highlights • Orienting polymer layer influence on molecular dynamics is studied by FDDS. • X-ray diffraction for identification of liquid crystalline phases is used. • DSC and POM was used to study thermal stability. • Parameters important for applications are designed. [ABSTRACT FROM AUTHOR]

Correction to: I Scientific Reports i https://doi.org/10.1038/s41598-023-38978-x, published online 14 August 2023 The original version of this Article contained an error in the spelling of the author Paulina Ratajczyk, which was incorrectly given as Paulina Ratajczak. The original article can be found online at https://doi.org/10.1038/s41598-023-38978-x. [Extracted from the article]

The aim of our study was to analyze the influence of various concentrations of γ-Fe2O3 nanoparticles on the physical properties of the liquid crystalline ferroelectric SmC* phase, as well as to check the effect of introducing nanoparticles in the LC matrix on their properties in the prepared five nanocomposites. UV-vis spectroscopy showed that the admixture reduced the absorption of nanocomposites in the UV range, additional absorption bands appeared, and all nanocomposites were transparent in the range of 500–850 nm. The molecular dynamics in particular phases of the nanocomposites were investigated by the dielectric spectroscopy method, and it was found that nanoparticles caused a significant increase in the dielectric constant at low frequencies, a strong modification of the dielectric processes in the SmC* phase, and the emergence of new relaxation processes for the highest dopant concentrations. SQUID magnetometry allowed us to determine the magnetic nature of the nanoparticles used, and to show that the blocked state of nanoparticles was preserved in nanocomposites (hysteresis loops were also registered in the ferroelectric SmC* phase). The dependence of the coercive field on the admixture concentration and the widening of the hysteresis loop in nanocomposites in relation to pure nanoparticles were also found. In turn, the FT-MIR spectroscopy method was used to check the influence of the impurity concentration on the formation/disappearance or modification of the absorption bands, and the modification of both the FWHM and the maximum positions for the four selected vibrations in the MIR range, as well as the discontinuous behavior of these parameters at the phase transitions, were found. [ABSTRACT FROM AUTHOR]

DNA complexes with cetyltrimethylammonium chloride (CTMA), benzyldimethylhexadecylammonium chloride (BAC) and hexadecylpyridinium chloride (HDP) surfactants as powder samples were studied by Fourier-transform middle infrared spectroscopy, X-ray diffraction and dielectric spectroscopy methods. Complexation as electrostatic interactions was confirmed by FT-MIR spectroscopy. The width of DNA-surfactant complexes was estimated to 61–73 Å based on modeling with the semi-empirical PM7 method. Based on SAXS results we propose the packing model for the complex molecules as hexagonal or slightly distorted hexagonal depending on the surfactant. For the first time the dielectric process registered in the low frequency range for all complexes was interpreted as oscillation of surfactant ions (BAC+, HDP+ or CTMA+), analogous to the oscillation of ions (e.g. Na+) in solutions of pure DNA. The influence of the structure of the complex-forming surfactant molecule on the value of the relaxation time distribution parameter is discussed. [Display omitted] • Native DNA is mainly characterized by B-conformation, while in complexes with surfactants it has A-conformation. • DNA-CTMA complex have a hexagonal structure, while DNA-BAC and DNA-HDP a slightly distorted hexagonal structure. • The relaxation process for DNA-surfactant complexes is connected with the oscillations of the surfactant functional groups. [ABSTRACT FROM AUTHOR]

The aim of this paper is to show, by systematic studies, the influence of γ-Fe2O3 nanoparticles on the physical parameters of the liquid crystalline matrix, exhibiting a ferroelectric phase in a wide temperature range. The detailed research was carried out by using diffraction (PXRD), microscopic (OM, SEM, FCPM, POM), thermal (DSC), optical (TLI), electric and spectroscopic (FTIR) methods. We show that even the smallest concentration of γ-Fe2O3 nanoparticles largely modifies the parameters of the ferroelectric SmC* phase, such as spontaneous polarization, switching time, tilt angle, rotational viscosity, dispersion anchoring energy coefficient and helix pitch. The admixture also causes a significant reduction in the temperature of phase transitions, broadening the SmA* phase at the expense of the SmC* phase and strong streaking of the texture. We present and explain the non-monotonic modification of these parameters with an increase in the nanoparticle concentration. The influence of oleic acid admixture on these parameters is also widely discussed. We have shown that certain parameters of organic-metal nanocomposites can be controlled by the appropriate amount of metal admixture. [ABSTRACT FROM AUTHOR]

The dielectric properties of six symmetrical azomethines with various number of benzene rings were studied in the isotropic phase. The permittivity as well as the impedance spectra were analyzed because the only one relaxation process was visible in the permittivity spectra while two relaxation processes appear in the impedance presentation. It was found that the process at low frequency range, characterized by a very high dielectric increment and parameter α ~ 0.1, is attributed to the ionic motion, while the high frequency Debye-type process with the relatively small increment is connected with the dipolar rotation of the molecules (displacement current). The appearance of an abnormally high value of the static permittivity is discussed, which may be useful for biological and/or other molecular systems where the ionic conductivity is usually very high. • The impedance spectra of azomethines allow to distinguish two relaxation processes. • The very strong process at low frequency is attributed to the ionic motion. • The high frequency process is connected with the dipolar rotation of the molecules. • Activation energy of the dipolar rotation increases with increasing polarity of the terminal azomethine group. [ABSTRACT FROM AUTHOR]

The main goal of this paper was to study the dielectric properties of hybrid binary and ternary composites based on biodegradable polymer Ecoflex®, single walled carbon nanotubes (SWCN), and liquid crystalline 4′-pentyl-4-biphenylcarbonitrile (5CB) compound. The obtained results were compared with other created analogically to Ecoflex®, hybrid layers based on biodegradable polymers such as L,D-polylactide (L,D-PLA) and polycaprolactone (PCL). Frequency domain dielectric spectroscopy (FDDS) results were analyzed taking into consideration the amount of SWCN, frequency, and temperature. For pure Ecoflex®, two relaxation processes (α and β) were identified. It was shown that the SWCN admixture (in the weight ratio 10:0.01) did not change the properties of the Ecoflex® layer, while in the case of PCL and L,D-PLA, the layers became conductive. The dielectric constant increased with an increase in the content of SWCN in the Ecoflex® matrix and the conductive behavior was not visible, even for the greatest concentration (10:0.06 weight ratio). In the case of the Ecoflex® polymer matrix, the conduction relaxation process at a frequency ca. several kilohertz appeared and became stronger with an increase in the SWCN admixture in the matrix. Addition of oleic acid to the polymer matrix had a smaller effect on the increase in the dielectric response than the addition of liquid crystal 5CB. Fourier transform infrared (FTIR) results revealed that the molecular structure and chemical character of the Ecoflex® and PCL matrixes remained unchanged upon the addition of SWCN or 5CB in a weight ratio of 10:0.01 and 10:1, respectively, while molecular interactions appeared between L,D-PLA and 5CB. Moreover, adding oleic acid to pure Ecoflex® as well as the binary and ternary hybrid layers with SWCN and/or 5CB in a weight ratio of Ecoflex®:oleic acid equal to 10:0.3 did not have an influence on the chemical bonding of these materials. [ABSTRACT FROM AUTHOR]

A non-isocyanate poly (hydroxyurethane) network was synthesized by reaction of a tricyclic carbonate compound with diamines. The system was modified by two types of Polyhedral Oligomeric Silsesquioxane (POSS) molecules, one retaining the crosslinked nature of the system, and another effectively loosening it. We studied water absorption as a function of environmental humidity and observed that all systems are extremely hydrophilic, absorbing up to 65% of water when exposed to 97% environmental humidity. In parallel, using differential scanning calorimetry and dielectric spectroscopy, we studied the effects of POSS and the significant plasticization caused by absorbed water on the glass transition and charge mobility. In dry materials, crosslinking POSS seems to reinforce the matrix and at least initially slow down mobility while the opposite effect is observed for the moiety that loosens the network. Both POSS inhibit plasticization, both indirectly by inhibiting water absorption, and directly, by stiffening the network, especially in the case of crosslinking POSS. [Display omitted] • Non-isocyanate poly (hydroxyurethane)s networks are very hydrophilic polymers. • Absorption of aater causes extreme reduction of T g. • POSS affect glass transition of these networks in ways dependent on the topology. • POSS affect the water absorbing capacity of the networks. [ABSTRACT FROM AUTHOR]