Search

The effect of stray fields from the recording layer on the reading and writing process has been studied for a perpendicular recording system. The system consists of a single pole writer with a wide return pole, a conventional spin-valve reader and a double layer recording medium. A writer- and reader-induced asymmetry is observed in the recording process for a dc erased background. The asymmetry is interpreted as stray fields of the dc background giving rise to reader saturation and an offset in the current driven inductive write field. [ABSTRACT FROM AUTHOR]

A focused ion beam (FIB) has been used to trim write heads for perpendicular magnetic recording using untrimmed HGA-level longitudinal heads. The ion-beam imaging of the write head during FIB processing was minimized to limit exposure of the active magnetic material at the ABS to a 30 keV Ga[sup +] ion dose of less than 10[sup 14] Ga[sup +]/cm² (≈10[sup -13] C/µm²) (the GMR reader was never exposed), which is significantly below levels where magnetic properties have been observed to degrade [W. M. Kaminsky et al., Appl. Phys. Lett. 78, 1589 (2001)]. The corresponding recording characteristics and spatial profiles of written tracks have been measured on a spin stand and a magnetic force microscope (MFM). Recording performance, such as SNR, and pulse shape of transitions, for example, as a function of head design and FIB processing is discussed, which compares very favorably to the performance of untrimmed heads. The MFM images reveal curvature in the magnetic transitions (transition smile) when writing with a single-pole writer with a straight trailing edge. Conversely, we demonstrate straight transitions using a single-pole writer with a curved trailing edge. Our results demonstrate the robustness of FIB-trimmed heads down to sub-100-nm length scales. [ABSTRACT FROM AUTHOR]

To achieve an ultra-high storage capacity, heated-dot magnetic recording (HDMR) has been proposed, which heats a bit-patterned medium before recording data. Generally, an error during the HDMR writing process comes from several sources; however, we only investigate the effects of staggered island arrangement, island size fluctuation caused by imperfect fabrication, and main pole position fluctuation. Simulation results demonstrate that a writing error can be minimized by using a staggered array (hexagonal lattice) instead of a square array. Under the effect of main pole position fluctuation, the writing error is higher than the system without main pole position fluctuation. Finally, we found that the error percentage can drop below 10% when the island size is 8.5 nm and the standard deviation of the island size is 1 nm in the absence of main pole jitter. [ABSTRACT FROM AUTHOR]

Although near-field microscopy has allowed optical imaging with sub-20 nm resolution, the optical throughput of this technique is notoriously small. As a result, applications such as optical data storage have been impractical. However, with an optimized near-field transducer design, we show that optical energy can be transferred efficiently to a lossy metallic medium and yet remain confined in a spot that is much smaller than the diffraction limit. Such a transducer was integrated into a recording head and flown over a magnetic recording medium on a rotating disk. Optical power from a semiconductor laser at a wavelength of 830 nm was efficiently coupled by the transducer into the medium to heat a 70-nm track above the Curie point in nanoseconds and record data at an areal density of ∼375 Tb m−2. This transducer design should scale to even smaller optical spots. [ABSTRACT FROM AUTHOR]

A correction to the article "Heat-Assisted Magnetic Recording by a Near-Field Transducer With Efficient Optical Energy Transfer" that was published in the previous issue is presented.