Search

Literature data are reviewed relevant to the decision for a biowaiver of immediate release (IR) solid oral dosage forms containing metoclopramide hydrochloride. In addition, new solubility data, obtained under Biopharmaceutics Classification System (BCS) conditions are presented. Metoclopramide HCl is conservatively assigned to BCS Class III. Taken also into consideration excipient interactions reported in metoclopramide drug products, its pharmacokinetic properties and therapeutic use and therapeutic index, a biowaiver can be recommended when: (a) the test product contains only excipients present also in metoclopramide HCl containing IR solid oral drug products approved in ICH or associated countries, for instance as presented in this paper, (b) in amounts in normal use in IR solid oral dosage forms, and (c) the test product and the comparator both comply with the criteria for very rapidly dissolving. © 2008 Wiley-Liss, Inc. and the American Pharmacists Association J Pharm Sci 97:3700–3708, 2008 [ABSTRACT FROM AUTHOR]

Literature data on the properties of chloroquine phosphate, chloroquine sulfate, and chloroquine hydrochloride related to the Biopharmaceutics Classification System (BCS) are reviewed. The available information indicates that these chloroquine salts can be classified as highly soluble and highly permeable, i.e., BCS class I. The qualitative composition of immediate release (IR) tablets containing these Active Pharmaceutical Ingredients (APIs) with a Marketing Authorization (MA) in Belgium (BE), Germany (DE), Finland (FI), and The Netherlands (NL) is provided. In view of these MA's and the critical therapeutic indication of chloroquine, it is assumed that the registration authorities had evidence that these formulations are bioequivalent to the innovator. It is concluded that IR tablets formulated with these excipients are candidates for a biowaiver. © 2005 Wiley-Liss, Inc. and the American Pharmacists Association J Pharm Sci 94:1389–1395, 2005 [ABSTRACT FROM AUTHOR]

Bioenergy is considered an important component within the European Union (EU) energy transition to meet mid‐century climate targets. Model assessments that have highlighted the role of bioenergy in decarbonising EU energy systems fail to account for the fact that mitigation strategies and bioenergy supply take place within a global decarbonisation effort. Thus, they do not account for inter‐regional competition for the resource base that Europe may face. This study shows how bioenergy can contribute to EU climate targets, highlighting its possible role within the energy system and developments required to facilitate its scale‐up. We use the global integrated assessment model IMAGE 3.2 to project bioenergy demand, sectoral deployment, feedstock, and inter‐regional import for Europe to 2050. Employing a global model allows for projections of EU decarbonisation strategies consistent with global climate targets and captures the effects of biomass production and consumption in other world regions. Bioenergy is projected to account for up to 27% of total primary energy demand, increasing from the current 5EJ to 18EJ/yr. To match this demand, the model projects imports of biomass to increase from 4% of its current supply to 60%. Bioenergy could provide up to 1GtCO2 or 40% of the overall mitigation needed by the EU in 2050. This is based on large‐scale use for power production, with the transport, industry and buildings sectors getting smaller shares. By 2050 it is projected that 55% of total EU bioenergy use is coupled with Bioenergy with carbon capture and storage (BECCS). Bioenergy supply comes primarily for agricultural and forestry residues, as these sources have low upstream greenhouse gas emissions. However, as demand increases, energy crops are increasingly used, especially in the provision of advanced liquid fuels. The results show that one route for achieving an EU energy transition is based on rapid deployment of BECCS and the mobilisation of sustainable imports of second‐generation feedstocks. [ABSTRACT FROM AUTHOR]

The export of wood pellets from the southeastern United States (USA) has grown significantly in recent years, following rising demand from Europe. Increased wood pellet demand could lead to spatially variable changes in timberland management and area in the USA. This study presents an assessment of the impacts of increasing wood pellet demand (an additional 11.6 Mt by 2030) on land-use dynamics, taking into account developments in other wood product markets as well as expected changes in other land uses. An economic model for the forest sector of the southeastern USA (SRTS) was linked to a land-use change model (PLUC) to identify potential locations of land-use change following scenarios of demand for pellets and other wood products. Projections show that in the absence of additional demand for wood pellets, natural timberland area is projected to decline by 450-15 000 km2 by 2030, mainly through urbanization and pine plantation establishment. Under the high wood pellet demand scenario, more (2000-7500 km2) natural timberland area is retained and more (8000-20 000 km2) pine plantation is established. Shifts from natural timberland to pine plantation occur predominantly in the Atlantic coastal region. Future work will assess the impact of projected transitions in natural timberland and pine plantations on biodiversity and carbon storage. This modeling framework can be applied for multiple scenarios and land-use projections to identify locations of timberland area changes for the whole southeastern USA, thereby informing the debate about potential impacts of wood pellet demand on land-use dynamics and environmental services. © 2017 The Authors. Biofuels, Bioproducts and Biorefining published by Society of Chemical Industry and John Wiley & Sons, Ltd. [ABSTRACT FROM AUTHOR]

Literature data are reviewed relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of new multisource and reformulated immediate release (IR) solid oral dosage forms containing quinidine sulfate. Quinidine sulfate's solubility and permeability, its therapeutic use and index, pharmacokinetics, excipient interactions and reported BE/bioavailability (BA) problems were taken into consideration. The available data are not fully conclusive, but do suggest that quinidine sulfate is highly soluble and moderately to highly permeable and would likely be assigned to BCS Class I (or at worst BCS III). In view of the inconclusiveness of the data and, more important, quinidine's narrow therapeutic window and critical indication, a biowaiver based approval of quinidine containing dosage forms cannot be recommended for either new multisource drug products or for major postapproval changes (variations) to existing drug products. © 2008 Wiley-Liss, Inc. and the American Pharmacists Association J Pharm Sci 98:2238–2251, 2009 [ABSTRACT FROM AUTHOR]

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of new multisource and reformulated immediate release (IR) solid oral dosage forms containing rifampicin as the only Active Pharmaceutical Ingredient (API) are reviewed. Rifampicin's solubility and permeability, its therapeutic use and index, pharmacokinetics, excipient interactions and reported BE/bioavailability (BA) problems were taken into consideration. Solubility and absolute BA data indicate that rifampicin is a BCS Class II drug. Of special concern for biowaiving is that many reports of failure of IR solid oral dosage forms of rifampicin to meet BE have been published and the reasons for these failures are yet insufficiently understood. Moreover, no reports were identified in which in vitro dissolution was shown to be predictive of nonequivalence among products. Therefore, a biowaiver based approval of rifampicin containing IR solid oral dosage forms cannot be recommended for either new multisource drug products or for major scale-up and postapproval changes (variations) to existing drug products. © 2009 Wiley-Liss, Inc. and the American Pharmacists Association J Pharm Sci 98:2252–2267, 2009 [ABSTRACT FROM AUTHOR]

Literature data are reviewed on the properties of ibuprofen related to the biopharmaceutics classification system (BCS). Ibuprofen was assessed to be a BCS class II drug. Differences in composition and/or manufacturing procedures were reported to have an effect on the rate, but not the extent of absorption; such differences are likely to be detectable by comparative in vitro dissolution tests. Also in view of its therapeutic use, its wide therapeutic index and uncomplicated pharmacokinetic properties, a biowaiver for immediate release (IR) ibuprofen solid oral drug products is scientifically justified, provided that the test product contains only those excipients reported in this paper in their usual amounts, the dosage form is rapidly dissolving (85% in 30 min or less) in buffer pH 6.8 and the test product also exhibits similar dissolution profiles to the reference product in buffer pH 1.2, 4.5, and 6.8. © 2005 Wiley-Liss, Inc. and the American Pharmacists Association J Pharm Sci 94:2121-2131, 2005 [ABSTRACT FROM AUTHOR]

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing lamivudine as the only active pharmaceutical ingredient were reviewed. The solubility and permeability data of lamivudine as well as its therapeutic index, its pharmacokinetic properties, data indicating excipient interactions, and reported BE/bioavailability (BA) studies were taken into consideration. Lamivudine is highly soluble, but its permeability characteristics are not well-defined. Reported BA values in adults ranged from 82% to 88%. Therefore, lamivudine is assigned to the biopharmaceutics classification system (BCS) class III, noting that its permeability characteristics are near the border of BCS class I. Lamivudine is not a narrow therapeutic index drug. Provided that (a) the test product contains only excipients present in lamivudine IR solid oral drug products approved in the International Conference on Harmonization or associated countries in usual amounts and (b) the test product as well as the comparator product fulfills the BCS dissolution criteria for very rapidly dissolving; a biowaiver can be recommended for new lamivudine multisource IR products and major post-approval changes of marketed drug products. © 2011 Wiley-Liss, Inc. and the American Pharmacists Association J Pharm Sci 100:2054-2063, 2011 [ABSTRACT FROM AUTHOR]

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing doxycycline hyclate are reviewed. According to the Biopharmaceutics Classification System (BCS), doxycycline hyclate can be assigned to BCS Class I. No problems with BE of IR doxycycline formulations containing different excipients and produced by different manufacturing methods have been reported and hence the risk of bioinequivalence caused by these factors appears to be low. Doxycycline has a wide therapeutic index. Further, BCS-based dissolution methods have been shown to be capable of identifying formulations which may dissolve too slowly to generate therapeutic levels. It is concluded that a biowaiver is appropriate for IR solid oral dosage forms containing doxycycline hyclate as the single Active Pharmaceutical Ingredient (API) provided that (a) the test product contains only excipients present in doxycycline hyclate IR solid oral drug products approved in the International Conference on Harmonization (ICH) or associated countries; and (b) the comparator and the test products comply with the BCS criteria for “very rapidly dissolving” or, alternatively, when similarity of the dissolution profiles can be demonstrated and the two products are “rapidly dissolving.”. © 2009 Wiley-Liss, Inc. and the American Pharmacists Association J Pharm Sci 99: 1639–1653, 2010 [ABSTRACT FROM AUTHOR]

Literature data are reviewed regarding the scientific advisability of allowing a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing either diclofenac potassium and diclofenac sodium. Within the biopharmaceutics classification system (BCS), diclofenac potassium and diclofenac sodium are each BCS class II active pharmaceutical ingredients (APIs). However, a biowaiver can be recommended for IR drug products of each salt form, due to their therapeutic use, therapeutic index, pharmacokinetic properties, potential for excipient interactions, and performance in reported BE/bioavailability (BA) studies, provided: (a) test and comparator contain the same diclofenac salt; (b) the dosage form of the test and comparator is identical; (c) the test product contains only excipients present in diclofenac drug products approved in ICH or associated countries in the same dosage form, for instance as presented in this paper; (d) test drug product and comparator dissolve 85% in 30 min or less in 900 mL buffer pH 6.8, using the paddle apparatus at 75 rpm or the basket apparatus at 100 rpm; and (e) test product and comparator show dissolution profile similarity in pH 1.2, 4.5, and 6.8. © 2008 Wiley-Liss, Inc. and the American Pharmacists Association J Pharm Sci 98:1206–1219, 2009 [ABSTRACT FROM AUTHOR]

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing (biowaiver) for the approval of immediate release (IR) solid oral dosage forms containing aciclovir are reviewed. Aciclovir therapeutic use and therapeutic index, pharmacokinetic properties, data related to the possibility of excipient interactions and reported BE/bioavailability (BA) studies were also taken into consideration in order to ascertain whether a biowaiver can be recommended. According to the Biopharmaceutics Classification System (BCS) and considering tablet strengths up to 400 mg, aciclovir would be BCS Class III. However, in some countries also 800 mg tablets are available which fall just within BCS Class IV. Aciclovir seems not to be critical with respect to a risk for bioinequivalence, as no examples of bioinequivalence have been identified. It has a wide therapeutic index and is not used for critical indications. Hence, if: (a) the test product contains only excipients present in aciclovir solid oral IR drug products approved in ICH or associated countries, for instance as presented in this article; and (b) the comparator and the test product both are very rapidly dissolving, a biowaiver for IR aciclovir solid oral drug products is considered justified for all tablet strengths. © 2008 Wiley-Liss, Inc. and the American Pharmacists Association J Pharm Sci 97:5061–5073, 2008 [ABSTRACT FROM AUTHOR]

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing pyrazinamide as the only active pharmaceutical ingredient (API) are reviewed. Pyrazinamide is BCS Class III, with linear absorption over a wide dosing range. The risk of bioinequivalence is estimated to be low. Depending on the definition used, pyrazinamide can be classified as a narrow therapeutic index (NTI) drug, which is usually a caveat to biowaiving but may be deemed acceptable if the Summary of Product Characteristics (SmPCs) of the test product stipulates the need for regular monitoring of liver function. It is concluded that a biowaiver can be recommended for IR solid oral dosage only when the test product (a) contains only excipients present in pyrazinamide IR solid oral drug products approved in ICH or associated countries, (b) these excipients are present in amounts normally used in IR solid oral dosage forms, (c) the test product is very rapidly dissolving, (d) the SmPC of the test product indicates the need for monitoring of the patient's liver function. © 2008 Wiley-Liss, Inc. and the American Pharmacists Association J Pharm Sci 97:3709–3720, 2008 [ABSTRACT FROM AUTHOR]

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing acetazolamide are reviewed. Acetazolamide's solubility and permeability characteristics according to the Biopharmaceutics Classification System (BCS), as well as its therapeutic use and therapeutic index, its pharmacokinetic properties, data related to the possibility of excipient interactions and reported BE/bioavailability (BA) problems are taken into consideration. The available data on solubility, on oral absorption and permeability are not sufficiently conclusive to classify acetazolamide with certainty. Taking a conservative approach, no biowaiver is considered justified for the registration of new multisource drug products. However, SUPAC level 1 and level 2 postapproval changes and most EU Type I variations can be approved waiving in vivo BE studies. © 2008 Wiley-Liss, Inc. and the American Pharmacists Association J Pharm Sci 97:3691–3699, 2008 [ABSTRACT FROM AUTHOR]

Chitosan, a biodegradable and biocompatible polymer, has attracted great attention in the pharmaceutical and biomedical fields especially due to its properties to reversibly open the tight junctions of the epithelial tissues and to allow for paracellular transport of hydrophilic macromolecules. However, chitosan exhibits low solubility at pH values above 6 that may prevent its enhancing effects at the sites of intestinal absorption. Hence, a number of alkylated chitosan salts have been synthesized and characterized. These derivatives have been shown to have good solubility at neutral pH and act as effective permeation enhancers. In this study, two new derivatives of chitosan, C2-C6 trimethyl 6-amino-6-deoxy chitosan and C2-C6 triethyl 6-amino-6-deoxy chitosan were synthesized and characterized using 1H-NMR and FTIR spectra. Moreover, the zeta potential and the antibacterial properties of these polymers were compared to chitosan, trimethyl chitosan (TMC) and triethyl chitosan (TEC). Our results suggest that both C2-C6 trimethyl and triethyl 6-amino- 6-deoxy chitosan, as highly water soluble polymers, have higher positive surface charge than chitosan, TMC, and TEC. Moreover, the new synthesized polymers show higher antibacterial activity against Gram-positive Staphylococcus aureus bacteria. Consequently, these polymers with substitution degrees of 50-60% may be good candidates for the enhancement of peptides in mucosal drug delivery. [ABSTRACT FROM AUTHOR]

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing ethambutol dihydrochloride as the only active pharmaceutical ingredient (API) are reviewed. Ethambutol dihydrochloride is a Biopharmaceutics Classification System (BCS) Class III drug with permeability properties approaching the border between BCS Class I and III. BE problems of ethambutol formulations containing different excipients and different dosages forms have not been reported and hence the risk of bioinequivalence caused by excipients is low. Ethambutol has a narrow therapeutic index related to ocular toxicity. However, as long as the prescribers' information of the test product stipulates the need for regular monitoring of ocular toxicity, the additional patient risk is deemed acceptable. It is concluded that a biowaiver can be recommended for IR solid oral dosage forms provided that the test product (a) contains only excipients present in ethambutol IR solid oral drug products approved in ICH or associated countries, for instance as presented in this paper, (b) complies with the criteria for “very rapidly dissolving” and (c) has a prescribers' information indicating the need for testing the patient's vision prior to initiating ethambutol therapy and regularly during therapy. © 2007 Wiley-Liss, Inc. and the American Pharmacists Association J Pharm Sci 97:1350–1360, 2008 [ABSTRACT FROM AUTHOR]

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing prednisone are reviewed. Due to insufficient data prednisone cannot be definitively classified according to the current Biopharmaceutics Classification System (BCS) criteria as both the solubility and the permeability of prednisone are on the borderline of the present criteria of BCS Class I. Prednisone's therapeutic indications and therapeutic index, pharmacokinetics and the possibility of excipient interactions were also taken into consideration. Available evidence indicates that a biowaiver for IR solid oral dosage forms formulated with the excipients tabulated in this article would be unlikely to expose patients to undue risks. © 2007 Wiley-Liss, Inc. and the American Pharmacists Association J Pharm Sci 96:1480–1489, 2007 [ABSTRACT FROM AUTHOR]

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing isoniazid as the only active pharmaceutical ingredient (API) are reviewed. Isoniazid's solubility and permeability characteristics according to the Biopharmaceutics Classification System (BCS), as well as its therapeutic use and therapeutic index, its pharmacokinetic properties, data related to the possibility of excipient interactions and reported BE/bioavailability (BA) problems were taken into consideration. Isoniazid is “highly soluble” but data on its oral absorption and permeability are inconclusive, suggesting this API to be on the borderline of BCS Class I and III. For a number of excipients, an interaction with the permeability is extreme unlikely, but lactose and other deoxidizing saccharides can form condensation products with isoniazid, which may be less permeable than the free API. A biowaiver is recommended for IR solid oral drug products containing isoniazid as the sole API, provided that the test product meets the WHO requirements for “very rapidly dissolving” and contains only the excipients commonly used in isoniazid products, as listed in this article. Lactose and/or other deoxidizing saccharides containing formulations should be subjected to an in vivo BE study. © 2006 Wiley-Liss, Inc. and the American Pharmacists Association J Pharm Sci [ABSTRACT FROM AUTHOR]

N,N-dimethyl N-ethyl chitosan (DMEC), a quanternized derivative of chitosan was synthesized based on a modified two-stop method via a 2² factorial design to optimize the preparative conditions. The degree of deacetylation of the starting chitosan was determined by FTIR and NMR methods and was 95%. In the first step of the synthesis, mono-ethyl chitosan was prepared by introducing an ethyl group onto the amine group of chitosan via a Schiff base and in the next step methyl iodide was added to produce DMEC which was water soluble in a pH range of 4–8. The DMEC polymers with different degrees of quaternization were obtained and fully characterized using FTIR and ¹H-NMR spectroscopic methods. Based on ¹H-NMR calculations, the degree of quaternization was 52% by optimizing the two-step process. [ABSTRACT FROM AUTHOR]

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing cimetidine are reviewed. According to the current Biopharmaceutics Classification System (BCS), cimetidine would be assigned to Class III. Cimetidine's therapeutic use and therapeutic index, its pharmacokinetic properties, data related to the possibility of excipient interactions, and reported BE/bioavailability (BA) problems were also taken into consideration. On the basis of the overall evidence, a biowaiver can be recommended for cimetidine IR products, provided that the test product contains only those excipients reported in this paper in their usual amounts, and that the test and the comparator drug products both are “rapidly dissolving” as per BCS. © 2006 Wiley-Liss, Inc. and the American Pharmacists Association J Pharm Sci 95:974–984, 2006 [ABSTRACT FROM AUTHOR]

Differentiated, human submucosal-gland carcinoma, Calu-3 cell monolayers were used as in vitro model for the airway epithelium. Internalised phage were selected from a recombinant pComb8 phage library by repetitive cycles of bio-panning on Calu-3 monolayers, protease K degradation, cell-lysis and amplification. After four selection rounds, sequence analysis of 15 enriched phage colonies revealed two clones of 73 and 27% abundancy, named IB1 and IB2, respectively. The IB2 sequence was eliminated due to a frame shift. IB1-phage internalisation at 4°C was significantly lower ( P <0.05) than at 37°C, suggesting involvement of a receptor-mediated endocytosis pathway. The IB1 peptide was synthesised, biotinylated and complexed to streptavidin. IB1/streptavidin-complexes co-administrated with PEI/DNA-polyplexes, enhanced polyplex transfection efficiency, dose dependently, by 6- and 4-fold in Calu-3 cells. IB1/Alexa488-streptavidin complexes were used for confocal laser-scanning microscopy (CLSM) visualisation and showed basolateral localisation in membrane associated and internalising vesicles. This study demonstrates the potential of phage display technology for identification of internalising peptide-epitopes that can enhance gene delivery efficiency in differentiated airway epithelial cells. [ABSTRACT FROM AUTHOR]

Uptake of particulate antigen carrier systems by specialized M-cells of the gut-associated lymphoid tissue is still a limiting step in inducing efficient immune responses after oral vaccination. Although transport of soluble drugs over the epithelial barrier of the gut is extensively studied in vitro by using the Caco-2 cell model, this was for long time not possible for particles due to the absence of M-cells. By co-culturing Caco-2 cells with cultured human B-lymphocytes (Raji-cells), cells which are morphologically and functionally similar to M-cells can be induced. This human M-cells model makes it possible to study the uptake of microparticles for oral vaccine delivery. In this way, chitosan microparticles, which have demonstrated to target the Peyer's patches efficiently in vivo , could be tested in vitro . The development of this M-cells model facilitates the optimization of the microparticles in order to target them even more efficiently to the M-cells in the gut. In this study, the integrity of the human M-cell model was investigated by determining the transepithelial electrical resistance (TEER), 14 C-mannitol transport and morphology using scanning electron microscopy. The uptake of particles was investigated by measuring transport of both fluorescently labeled microspheres (Fluospheres ® ) and chitosan microparticles using flowcytometry. No discontinuities or abnormalities could be found in the co-culture. Scanning electron microscopy showed that morphologically different cells were present in the human M-cell model. Both commercially available Fluospheres ® (size 0.2 μm) and chitosan microparticles (size 1.7 μm) for oral vaccine delivery were transported at a significantly higher amount by the human M-cell model compared to the transport by the Caco-2 cell monoculture. Since chitosan microparticles were proven to be taken up by Peyer's patches in mice as well, this human M-cell model is able to predict the M-cell uptake of microparticles for oral vaccine delivery. This M-cell model is a new tool, which can be used to scan, develop and optimize microparticles for oral vaccine delivery. Since the M-cell uptake can now be studied in vitro , the targeting of these cells can be studied more efficiently and can now be done in cells from human origin. [ABSTRACT FROM AUTHOR]