Search

The hydrogen embrittlement (HE) susceptibility and hydrogen permeation behavior of reeling-pipeline welded joint with/without cyclic plastic deformation (CPD) were studied using the electrochemical hydrogen charging technique. Results indicated that the surface of welded joint emerged hydrogen-induced damage containing cracks and blisters. The degree of hydrogen-induced damage increased with the increase of hydrogen charging time and current density. When the hydrogen charging current density and time was 50 mA/cm2 and 4 h, respectively, the area ratio of hydrogen-induced damage of overall welded joint with CPD process was reduced from 6.61% to 2.28%, and the damage ratio of different sub-zones in welded joint was also decreased. The oxidized inclusions enriching Al–Mg–Ca elements acted as the initiation sites for hydrogen-induced damages. The effective diffusion coefficient of as-welded joint was 2.63 × 10−6 cm2/s, while that of welded joint with CPD showed a smaller value of 1.36 × 10−6 cm2/s. The welded joint with CPD process presented better resistance to HE, which was attributed to the increased density of hydrogen traps and the formation of dislocation cells to disperse hydrogen uniformly and reduce the possibility of local accumulation and recombination of diffusible hydrogen. Sub-zones in welded joint without CPD process were considerably more sensitive to hydrogen-induced damage, which indicated the important role of microstructure and dislocation density in HE mechanisms. The order of HE susceptibility from low to high was weld metal, base metal and heat affected zone. • Cyclic plastic deformation (CPD) reduced the hydrogen embrittlement susceptibility. • CPD reduced the diffusion coefficient of hydrogen in welded joint and its sub-zones. • The cellular dislocation configuration restricted the diffusibility of hydrogen. • The order of increasing susceptibility to hydrogen embrittlement was WM, BM and HAZ. [ABSTRACT FROM AUTHOR]

The safe service of reeled-pipeline welded joint subjected to multiple cyclic plastic deformation (CPD) is challenged by hydrogen embrittlement (HE) in the process of gas and petroleum transportation. Therefore, this work aims to study the interrelation of hydrogen and the ductility of X65 reeled-pipeline welded joint with CPD by using electrochemical hydrogen charging. The results showed that hydrogen could lead to the ductility degradation, regardless of whether the CPD process was performed. But the hydrogen-induced ductility degradation for the welded joint with CPD was retarded. When the hydrogen-charging current density was 50 mA/cm2, the hydrogen embrittlement index (I UE) based on the uniform elongation for welded joint with CPD was 0.33, while that of as-welded joint was 0.53, which indicated that CPD process reduced the sensitivity to HE. The morphology of tensile fracture indicated that brittle cracks initiated at the composite oxide inclusion enriched Al–Mg–Ca–S elements, and propagated radially by quasi-cleavage fracture pattern. The CPD process led to the increase of dislocations acting as reversible hydrogen traps, which significantly enhanced the hydrogen content of welded joint from 1.001 ppm to 2.516 ppm. However, the dislocation walls and cells related to the CPD process hindered the diffusion of hydrogen, and homogeneous distribution of dislocations after CPD dispersed trap sites for capturing hydrogen, which played important roles in delaying hydrogen-induced fracture. [ABSTRACT FROM AUTHOR]

Establishing lucerne field is an efficient way to protect natural steppes, alleviate conflicts between meadows and livestock, and promote the development of animal husbandry. However, problems such as extensive field management, valuing yield over quality, and low resource utilization are endemic in production. Exploring reasonable cultivation patterns can contribute to improving the current situation of artificial grassland production and promoting the high-quality development of husbandry and prataculture. Lucerne the field experiment was carried out in Jingtai, Gansu Province, China in 2021–2022; this study compared and analyzed the effects of three cultivation patterns—ridge tillage with plastic film mulching (PM), ridge tillage with biodegradable film mulching (BM), and traditional flat planting (FP)—on soil water, heat, and fertilizer, as well as lucerne growth, yield, quality, and water and nitrogen use efficiency. The results show that: (1) during the growth period of lucerne, PM and BM treatments augment the average moisture content of the soil layer of 0–120 cm by 31.19% and 24.03% compared to the FP treatment, respectively. In the soil layer of 0–40 cm, PM and BM treatments abate the soil moisture content of the ridges by an average of 19.29% and 7.89% compared to that in the ditches, respectively. In the soil layer of 40–120 cm, PM and BM treatments elevate the soil moisture content of the ridges by 4.40% and 4.65% on average compared to that in the ditches, respectively. The average soil temperature in a soil layer of 5–25 cm shows PM > BM > FP. In contrast with the FP treatment, PM and BM treatments increase the soil temperature of the ridges by an average of 1.87 °C and 0.96 °C and decrease that of the ditches by an average of 0.47 °C and 0.46 °C, respectively. After two years of planting, the three cultivation patterns all promote the soil nutrient content. Compared to the FP treatment, PM and BM treatments increase the organic matter content by 9.94% and 19.94%, respectively. (2) Ridge tillage with film mulching can evidently stimulate the growth of lucerne and enhance yield and quality. Compared to the FP treatment, PM and BM treatments enhance plant height by an average of 15.37% and 4.04%, stem diameter by an average of 34.14% and 14.58%, yield by an average of 21.20% and 14.77%, crude protein content by an average of 13.47% and 7.68%, and relative feed value by an average of 8.71% and 4.41%, respectively. (3) During the two-year growing period, the irrigation amount of lucerne was 508.60–615.30 mm, and the evapotranspiration was 563.70–761.80 mm. Compared to the FP treatment, PM and BM treatments hoist water use efficiency by an average of 43.50% and 17.56%, nitrogen partial factor productivity by an average of 21.20% and 15.22%, and net income by an average of 14.78% and 11.05%, respectively. In summary, in ridge tillage, both ordinary film mulching and biodegradable film mulching can create a favorable soil environment for lucerne growth and heighten production effect. The former has a better effect on advancing the lucerne production effect, and the latter exhibits superior performance in improving soil fertility. [ABSTRACT FROM AUTHOR]

Wolfberry (Lycium barbarum L.) production in arid and semi-arid areas is drastically affected by the low utilization rate of soil and water resources and the irrational application of water and nitrogen fertilizers. Thus, this study explored a high-yielding, high-quality, and efficient irrigation and nitrogen regulation model to promote the production efficiency of wolfberry and rational utilization of water and land resources in arid and semi-arid areas. We compared and analyzed the effects of different soil water treatments (the upper and lower limits of soil water were estimated as the percentage of soil water content to field water capacity (θf), with the following irrigation regimen: adequate irrigation (W0, 75–85% θf), mild water deficit (W1, 65–75% θf), moderate water deficit (W2, 55–65% θf), and severe water deficit (W3, 45–55% θf)) and nitrogen levels (no nitrogen (N0, 0 kg·ha−1), low nitrogen (N1, 150 kg·ha−1), moderate nitrogen (N2, 300 kg·ha−1), and high nitrogen (N3, 450 kg·ha−1)) on the growth, physiology, and production of wolfberry. The results showed that water regulation, nitrogen application level, and their interaction significantly affected plant height and stem diameter growth amount (p < 0.05). Additionally, the relative chlorophyll content of wolfberry leaves first increased and then decreased with increasing nitrogen levels and water deficit. The average net photosynthetic rate (Pn), stomatal conductance (gs), intercellular carbon dioxide concentration, and transpiration rate (Tr) reached the highest values in plants exposed to W0N2 (19.86 μmmol·m−2·s−1), W1N1 (182.65 mmol·m−2·s−1), W2N2 (218.86 μmol·mol−1), and W0N2 (6.44 mmol·m−2·s−1) treatments, respectively. Pn, gs, and Tr were highly correlated with photosynthetically active radiation and water vapor pressure difference (goodness-of-fit: 0.366–0.828). Furthermore, water regulation and nitrogen levels exhibited significant effects on the yield and water- (WUE), and nitrogen-use efficiency (NUE) (p < 0.01), and their interactions exhibited significant effects on the yield, WUE, and nitrogen partial productivity of wolfberry plants (p < 0.05). Moreover, the contents of total sugar, polysaccharides, fats, amino acids, and proteins were the highest in W1N2, W1N2, W1N2, W2N3, and W0N2 treatments, respectively, which were increased by 3.32–16.93%, 7.49–54.72%, 6.5–45.89%, 11.12–86.16%, and 7.15–71.67%, respectively. Under different water regulations (except for the W3 condition) and nitrogen level treatments, the net income and input–output ratio of wolfberry were in the order W1 > W0 > W2 > W3 and N2 > N3 > N1 > N0. The TOPSIS method also revealed that the yield, quality, WUE, NUE, and economic benefits of wolfberry improved under the W1N2 treatment, suggesting that WIN2 might be the most suitable irrigation and nitrogen regulation model for wolfberry production in regions with scarce land and water resources such as the Gansu Province and areas with similar climate. [ABSTRACT FROM AUTHOR]

This study was about the water-nitrogen regulation model and its soil nutrient environment effect for increasing the yield and efficiency of Bromus inermis in the Hexi Corridor, Gansu Province, China. Bromus inermis was used as the research object in this study and four irrigation management types and four nitrogen application levels were set. The four irrigation management types (controlled by the percentage of field capacity (θf) at the jointing stage) were 75–85% (W0), 65–85% (W1), 55–85% (W2) and 45–85% (W3). The four nitrogen application levels were pure nitrogen 0 kg·ha−1 (N0), 60 kg·ha−1 (N1), 120 kg·ha−1 (N2) and 180 kg·ha−1 (N3). The effects of water-nitrogen regulation on the spatial and temporal distribution of soil moisture and nitrate nitrogen (NO3−–N), plant height, chlorophyll content, yield and water-nitrogen use efficiency of Bromus inermis were studied. Results demonstrated that (1) soil water content (SWC) was mainly affected by irrigation and W1 treatment helped maintain shallow soil (0–40 cm) water's stability and avoided water redundancy or deficit in the 60–80 cm soil layer. The distribution of soil NO3−–N was mainly affected by nitrogen application. The N2 treatment could effectively increase the NO3−–N content in shallow soil (0–40 cm) and prevent nitrate-nitrogen leaching in the 60–100 cm soil layer. (2) Irrigation and nitrogen application could significantly increase the plant height and chlorophyll content of each cut of Bromus inermis. The average plant height and chlorophyll content of the N2W1 treatment were 66.99% and 30.30% higher than N0W3. (3) At the same time, irrigation and nitrogen application could significantly increase the yield of each cut of Bromus inermis, and the interaction between the two had a significant effect on the total yield. The total yield of the N2W1 treatment was the highest (12,259.54 kg·ha−1), 157.95% higher than N0W3. Irrigation and nitrogen application could significantly improve the water-nitrogen use efficiency of Bromus inermis, and their interaction only significantly impacted the partial-factor productivity of the applied nitrogen (PFPN). Meanwhile, the N2W2 treatment had the highest water use efficiency (WUE) (23.12 kg·m−3), and the N1W1 treatment had the highest PFPN (170.87 kg·kg−1). In summary, the moderate nitrogen application rate (120 kg·ha−1) combined with mild water deficit (65–85% θf at the jointing stage) could not only promote the high yield of Bromus inermis, but also avoid the leaching of water and nitrogen in deep soil. It is a suitable water and nitrogen management mode for Bromus inermis in the Hexi Corridor of Gansu Province, China. [ABSTRACT FROM AUTHOR]

Abstract Reel-lay process is an efficient and economic method for installing offshore pipelines. During reel-lay process, cyclic plastic deformation (CPD) is introduced into the pipeline and it will modify the mechanical properties of the pipeline steels. In this research, cyclic tension-compression plastic deformation was conducted on the weld metals of X60 pipeline to simulate the strain experienced in reel-lay process. Then the dislocation configurations and mechanical properties of the weld metals were investigated after CPD. The total dislocation density was increased by the CPD process. The dislocation configurations evolved from dislocation lines and tangles into dislocation walls under 2% CPD and dislocation cells upon 5% CPD, respectively. The formation of dislocation walls and cells was a dynamic process, in which dislocation multiplication and intersection competed with dislocation annihilation. The yield platform of the weld metals disappeared and the yield strength decreased after CPD, but the tensile strength had no obvious change with CPD. The work hardening ability and uniform elongation rate reduced with the CPD level. The reduction of work hardening ability was mainly associated with the disintegration of dislocation wall or cell structure during tensile tests. [ABSTRACT FROM AUTHOR]