Search

Corrosion is the irreversible, interfacial reaction of metals in the presence of an electrochemical environment which ultimately results in the deterioration of metals. Corrosion of reinforcement is the major problem in the reinforced concrete (RC) structure. Corrosion of reinforcement is a slow process because of the protective layer of concrete. Even in a severely corrosive environment corrosion process takes time to be initiated and propagated. Since to carry out research work, some techniques are required to accelerate the corrosion process in the shortest period. To overcome this problem, in the past, many researchers use a different method to accelerate the corrosion of steel in concrete. In this paper, a review is presented of various techniques used for accelerated corrosion testing. The suitability of reviewed methods on corrosion acceleration for several research works is presented. After that few case studies review to make use of various predicted empirical models and an experimental technique for predicting corrosion rate and the assessment of the remaining life of the structure. And finally, the paper is concluded by comparing the natural method of corrosion and the accelerated method of corrosion and the future scope of accelerated corrosion. [ABSTRACT FROM AUTHOR]

Industrial waste locks are used as raw materials to reduce harmful effects on the environment and improve environmental performance. Marble clay powder can be used as a filling aid and can fill voids in concrete structures. This article will show you how to use a maximum natural sand alternative in concrete with marble powder and quarry dust. The challenge of the 21st century is to change to a new form that can support the natural system. This necessitates a radical rethinking of how to give the community infrastructure and housing. Making a concerted effort to develop novel, innovative, and alternative construction materials may be necessary. Jungles of concrete around cause's impact on the Environment and it would result in climate change. Mankind must avoid the use of things that are detrimental to the environment. So in this paper, it is decided to address the issue by adopting the use of the green concrete concept which is environmentally friendly. Green concrete is concrete made up using industrial wastes such as marble powder, quarry dust, wood ash, paper pulp, etc. Green concrete, which is capable of sustainable development, helps to reduce the consumption of natural resources, energy use, and environmental pollution. Green concrete is more cost‐effective than ordinary concrete and reduces the cost of resultant concrete by 14%–20%. It is also observed that the alkali‐aggregate reaction and sulfate attack resistance of concrete are both significantly improved. Green concrete is a useful tool for lowering environmental pollution and enhancing concrete's resistance to harsh conditions. All stages of infrastructure construction and rehabilitation will follow this trend of using new cement and techniques. Green concrete's adaptability and its performance derivatives will meet a variety of future needs. [ABSTRACT FROM AUTHOR]

The use of ordinary Portland cement (OPC) in the construction industry is inevitable. The huge production of OPC and its use in infrastructural development pose an environmental impact. Greenhouse gas emitted increases the global temperature and it is an alarming sign to everybody on the planet. Concrete is the most consuming material which is produced by using OPC and it is proven that OPC contributes a lot to CO2 emission. Hence in this study attempt is made to produce concrete by using environment‐friendly material like fly ash along with alkaline activators, which is termed Geo polymer concrete. The by‐product fly ash is widely available worldwide. It is a by‐product of thermal power plants. The use of fly ash in concrete produces less expensive and more cost‐effective concrete than concrete made up using OPC. Due to its high silicate and alumina content, fly ash reacts with an alkaline solution to create an aluminosilicate gel that binds the aggregate and results in high‐quality concrete. Fly ash is finer than cement, it occupies the pores of cement after hydration. This would result in denser concrete which gives higher strength. In comparison to ordinary concrete, fly ash‐based geopolymer concrete offers better resistance to aggressive environments and high temperatures. In the present study, an alkaline activator of molarity 8 is used to prepare geopolymer concrete. The test specimens are cast and cured for 28 days. Test results indicate that an alkaline liquid fly‐ash ratio (0.4) produces higher mechanical properties. Hence, geopolymer concrete produced in this study is found to be cost‐effective and environment friendly. [ABSTRACT FROM AUTHOR]