Search

Supramolecular isomerism of metal–organic frameworks (MOFs) is known for several MOF structures, having direct implications on the properties of these materials. Although the synthesis of MOF isomers is mainly serendipitous in nature, achieving controlled formation of a target framework is highly relevant for practical applications. This work discusses the influence of additives and synthesis conditions on the formation of porous isomers containing Zn2+ as nodes and 2,5-dihydroxy-1,4-benzenedicarboxylate (dobdc4–) as a linker. Using solvent mixtures containing strongly coordinated molecules, e.g. N,N′-dimethylformamide (DMF) and N-methylpyrrolidone (NMP), facilitates the formation of porous structures of type [Zn2(dobdc)(S)x]·yS (S = DMF, NMP) which are built from dinuclear Zn2(O)2(CO2)3 secondary building units (SBUs) consisting of two different edge-sharing polyhedra with the Zn2+ ions in a unsaturated coordinative environment. In the presence of water, the Zn2+ dimers are converted to one-dimensional infinite Zn2+ chains, in which the number of Zn2+-linker bonds increases, therefore giving a hydrolytically more stable coordination environment. The full characterization of the isomers as well as their conversion to the most stable isomer is presented. [ABSTRACT FROM AUTHOR]

Self-assembly of colloidal particles into ordered superstructures enables the development of novel advanced materials for diverse applications such as photonics, electronics, sensing, energy conversion, energy storage, diagnosis, drug or gene delivery, and catalysis. Recently, polyhedral metal–organic framework (MOF) particles have been proposed as promising colloidal particles to form ordered superstructures, based on their colloidal stability, size-tunability, rich polyhedral shapes, porosity and multifunctionality. In this review, we present a comprehensive overview of strategies for the self-assembly of colloidal MOF particles into ordered superstructures of different dimensionalities, highlighting some of their properties and applications, and sharing thoughts on the self-assembly of MOF particles. [ABSTRACT FROM AUTHOR]

Metal-organic frameworks (MOFs) are among the most attractive porous materials known today, exhibiting very high surface areas, tuneable pore sizes and shapes, adjustable surface functionality, and flexible structures. Advances in the formation of MOF crystals, and in their subsequent assembly into more complex and/or composite superstructures, should expand the scope of these materials in many applications (e.g., drug delivery, chemical sensors, selective reactors and removal devices, etc.) and facilitate their integration onto surfaces and into devices. This Concept article aims to showcase recently developed synthetic strategies to control the one-, two- and three-dimensional (1-, 2- and 3D) organisation of MOF crystals. [ABSTRACT FROM AUTHOR]

The molecular complexes K4[Zr(DBQ)4] and K4[Zr(CA)4], where DBQ2- and CA2- stand respectively for deprotonated dihydroxybenzoquinone and chloranilic acid, are reported. The anionic metal complexes consist of Zr(IV) surrounded by four O,O-chelating ligands. Besides the preparation and crystal structures for the two complexes, we show that in the solid state the DBQ complex forms a 3-D open framework (with 22% accessible volume) that undergoes a crystal-to-crystal phase transition to a compact structure upon guest molecule release. This process is reversible. In the presence of H2O, CO2, and other small molecules, the framework opens and accommodates guest molecules. CO2 adsorption isotherms show that the framework breathing occurs only when a slight gas pressure is applied. Crystal structures for both the hydrated and guest free phases of K4[Zr(DBQ)4] have been investigated. [ABSTRACT FROM AUTHOR]

Metal-organic frameworks (MOFs) are among the most attractive porous materials known today. Their miniaturization to the nanoscale-into nanoMOFs-is expected to serve myriad applications from drug delivery to membranes, to open up novel avenues to more traditional storage and catalysis applications, and to enable the creation of sophisticated superstructures. Here, we report the use of spray-drying as a versatile methodology to assemble nanoMOFs, yielding spherical hollow superstructures with diameters smaller than 5 µm. This strategy conceptually mimics the emulsions used by chemists to confine the synthesis of materials, but does not require secondary immiscible solvents or surfactants. We demonstrate that the resulting spherical, hollow superstructures can be processed into stable colloids, whose disassembly by sonication affords discrete, homogeneous nanoMOFs. This spray-drying strategy enables the construction of multicomponent MOF superstructures, and the encapsulation of guest species within these superstructures. We anticipate that this will provide new routes to capsules, reactors and composite materials. [ABSTRACT FROM AUTHOR]

Increasing the chemical complexity of metal–organic cages (MOCs) or polyhedra (MOPs) demands control over the simultaneous organization of diverse organic linkers and metal ions into discrete caged structures. Herein, we show that a pre-assembled complex of the archetypical cuboctahedral MOP can be used as a template to replicate such caged structure, one having a "triblock Janus-type" configuration that is both heterometallic and heteroleptic. [ABSTRACT FROM AUTHOR]

A novel, versatile pen-type lithography-based methodology was developed to control the growth of HKUST-1 crystals on surfaces by direct delivery of femtoliter droplets containing both inorganic and organic building block precursors. This approach shows that through the use of surfaces with low wettability it is possible to control the crystallization of a single submicrometer metal-organic framework crystal at a desired location on a surface. [ABSTRACT FROM AUTHOR]

Abstract: An unprecedented octanuclear aggregate, [{Co(phen)2}6{W(CN)8}2Cl2]·2Cl, 2, resulted from the assembling of {Co(phen)2Cl2}, 1, and {W(CN)8}4−. Surprisingly, the reaction with the paramagnetic {Nb(CN)8}4− unit did not afford the homologous {Co–Nb} cluster. Instead the latter building unit undergoes dissociation which led to the formation of a mixed-valence [{CoII(phen)2}{CoIII(phen)(CN)4}2], 3. This observation is in contrast to the usual trend that {NbIV(CN)8}4− forms compounds isostructural to that observed for {MoIV(CN)8}4− and {WIV(CN)8}4−. The structures of the compounds 2 and 3 have been established by single crystal X-ray diffraction. Magnetic behaviors for compounds 1–3 are reported. [Copyright &y& Elsevier]

Abstract: The single crystals of lanthanum metaphosphate MLa(PO3)4 (M=Na, Ag) have been synthesized and studied by a combination of X-ray crystal diffraction and vibrational spectroscopy. The sodium and silver compounds crystallize in the same monoclinic P21/n space group ( factor group) with the following respective unit cell dimensions: , , , , , and , , , , , . This three-dimensional framework is built of twisted zig-zag chains running along a direction and made up of PO4 tetrahedra sharing two corners, connected to the LaO8 and NaO7 or AgO7 polyhedra by common oxygen atoms to the chains. The infrared and Raman vibrational spectra have been investigated. A group factor analysis leads to the determination of internal modes of (PO3)− anion in the phosphate chain. [Copyright &y& Elsevier]

We have synthesised and characterised the two possible isomers of heteroleptic trigonal antiprismatic M12L6L′6 MOPs by screening reactions of rhodium acetate with different pairs of complementary dicarboxylate linkers. The resulting 12 new MOPs (eight of isomer A + four of isomer B) are microporous in the solid state, exhibiting Brunauer–Emmett–Teller (BET) surface areas as high as 770 m2 g−1. [ABSTRACT FROM AUTHOR]

Micro- and nanoscale coordination polymer particles can be used for encapsulating and delivering drugs. In vitrocancer cell cytotoxicity assays showed that these capsules readily release doxorubicin, which shows anticancer efficacy. The results from this work open up new avenues for metal–organic capsules to be used as potential drug delivery systems. [ABSTRACT FROM AUTHOR]

Membrane technology has attracted great industrial interest in carbon capture and separation owing to the merits of energy-efficiency, environmental friendliness and low capital investment. Conventional polymeric membranes for CO 2 separation suffer from the trade-off between permeability and selectivity. Introducing porous fillers in polymers is one approach to enhance membrane separation performance. Metal-organic frameworks (MOFs), with ordered porous structure and diverse chemical functionalities, are promising fillers to prepare mixed matrix membranes (MMMs) for CO 2 separation. However, the main issue of MOF based MMMs in industry is their stability and processability. This review analyses recent work on stable and scalable MOF based MMMs for CO 2 separation. The typical stable MOFs, MOF-based MMMs and the scalable MOF synthesis are summarized. A large number of MOF-based MMM suffer from instability upon exposure to contaminants. For that reason, we also discuss the use of covalent organic frameworks (COFs) as an alternative to prepare MMMs for CO 2 separation, considering their excellent stability and good compatibility with polymers. Finally, a brief conclusion and current challenges on obtaining scalable and stable MMMs are outlined. This review may provide some guidance for designing high performance MMMs for industrial CO 2 capture and separation to help achieving carbon neutrality. [Display omitted] • Metal organic frameworks (MOFs) in a mixed matrix membrane (MMM) can increase CO 2 selectivity, but are not commercial yet. • Stability of MOF particles is challenging when water, sulphuric compounds or ammonia are in the feed gas. • Stability of MOF-based MMM has insufficiently studied for durations > 1000 h, while required for industrial application. • Covalent organic frameworks (COFs) are a more stable alternative for CO 2 separation with MMMs. • Manufacturing of MOFs is possible at kg-scale, where particle size (∼100 nm) is crucial for thin film composite structures. [ABSTRACT FROM AUTHOR]

Clip‐off Chemistry is a synthetic strategy that our group previously developed to obtain new molecules and materials through selective cleavage of bonds. Herein, we report recent work to expand Clip‐off Chemistry by introducing into it a retrosynthetic analysis step that, based on virtual extension of the products through cleavable bonds, enables one to define the required precursor materials. As proof‐of‐concept, we have validated our new approach by synthesising and characterising four aldehyde‐functionalised Rh(II)‐based complexes: a homoleptic cluster; a cis‐disubstituted paddlewheel cluster; a macrocycle; and a crown. [ABSTRACT FROM AUTHOR]

Clip‐off Chemistry is a synthetic strategy that our group previously developed to obtain new molecules and materials through selective cleavage of bonds. Herein, we report recent work to expand Clip‐off Chemistry by introducing into it a retrosynthetic analysis step that, based on virtual extension of the products through cleavable bonds, enables one to define the required precursor materials. As proof‐of‐concept, we have validated our new approach by synthesising and characterising four aldehyde‐functionalised Rh(II)‐based complexes: a homoleptic cluster; a cis‐disubstituted paddlewheel cluster; a macrocycle; and a crown. [ABSTRACT FROM AUTHOR]

Abstract: Tandem and multicomponent one‐pot reactions are highly attractive because they enable synthesis of target molecules in a single reaction vessel. However, they are difficult to control, as they can lead to the formation of many undesired side‐products. Herein we report the use of metal‐organic framework (MOF) pores decorated with organocatalytic squaramide moieties to confine ring‐opening epoxide reactions of diverse substrates. Controlled mono‐addition or tandem reactions inside the pores yield 1,2‐aminoalcohols or 1,2,2′‐aminodialcohols, respectively, in good yields. In addition, this squaramide‐functionalised MOF enables catalysis of higher‐complexity multicomponent reactions such as the catalytic ring‐opening of two different epoxides by a single amine to afford 1,2,2′‐aminodialcohols. [ABSTRACT FROM AUTHOR]

Review: [recently developed synthetic strategies to control the one-, two- and three-dimensional organisation of MOF crystals; 53 refs. [ABSTRACT FROM AUTHOR]

Metal–organic frameworks (MOFs) based on high-connected nets are generally very attractive due to their combined robustness and porosity. Here, we describe the synthesis of BCN-348, a new high-connected Zr-MOF built from an 8-connected (8-c) cubic Zr-oxocluster and an 8-c organic linker. BCN-348 contains a minimal edge-transitive 3,4,8-c eps net, and combines mesoporosity with thermal and hydrolytic stability. Encouraging results from preliminary studies on its use as a catalyst for hydrolysis of a nerve-agent simulant suggest its potential as an agent for detoxification of chemical weapons and other pernicious compounds. [ABSTRACT FROM AUTHOR]

Metal–organic frameworks (MOFs) possess high CO2 adsorption properties and are considered to be a promising candidate for the electrochemical carbon dioxide reduction reaction (eCO2RR). However, their insufficient selectivity and current density constrain their further exploration in the eCO2RR. In this work, by introducing a very small proportion of 2,5-dihydroxyterephthalic acid (DOBDC) into ZIF-8, a surface modified ZIF-8-5% catalyst was synthesized by a post-modification method, exhibiting enhanced selectivity (from 56% to 79%) and current density (from −4 mA cm−2 to −10 mA m−2) compared to ZIF-8. Density functional theory (DFT) calculations further demonstrate that the boosted eCO2RR performance on ZIF-8-5% could be attributed to the improved formation of the *COOH intermediate stemming from successful DOBDC surface modification. This work opens a new path for improving the catalytic properties of MOFs via their surface modification. [ABSTRACT FROM AUTHOR]

Adsorptive heat transformation systems such as adsorption thermal batteries and chillers can provide space heating and cooling in a more environmental friendly way. However, their use is still hindered by their relatively poor performances and large sizes due to the limited properties of solid adsorbents. Here, the spray-drying continuous-flow synthesis of a new type of solid adsorbents that results from combining metal-organic frameworks (MOFs), such as UiO-66, and hygroscopic salts, such as CaCl2 has been reported. These adsorbents, commonly named as composite salt in porous matrix (CSPM) materials, allow improving the water uptake capabilities of MOFs while preventing their dissolution in the water adsorbed; a common characteristic of these salts due to the deliquescence effect. It is anticipated that MOF-based CSPMs, in which the percentage of salt can be tuned, are promising candidates for thermal batteries and chillers. In these applications, it is showed that a CSPM made of UiO-66 and CaCl2 (38% w/w) exhibits a heat storage capacity of 367 kJ kg−1 , whereas a second CSPM made of UiO-66 and CaCl2 (53% w/w) shows a specific cooling power of 631 W kg−1 and a coefficient of performance of 0.83, comparable to the best solid adsorbents reported so far. [ABSTRACT FROM AUTHOR]

Covalent postsynthetic modification (PSM) of metal-organic frameworks (MOFs) has attracted much attention due to the possibility of tailoring the properties of these porous materials. Schiff-base condensation between an amine and an aldehyde is one of the most common reactions in the PSM of MOFs. Here, we report the use of the spray drying technique to perform this class of organic reactions, either between discrete organic molecules or on the pore surfaces of MOFs, in a very fast (1-2 s) and continuous way. Using spray drying, we show the PSM of two MOFs, the amine-terminated UiO-66-NH2 and the aldehyde-terminated ZIF-90, achieving conversion efficiencies up to 20 and 42%, respectively. Moreover, we demonstrate that it can also be used to postsynthetically cross-link the aldehyde groups of ZIF-90 using a diamine molecule with a conversion efficiency of 70%. [ABSTRACT FROM AUTHOR]

Herein we report a water-induced single-crystal to single-crystal transformation that involves the formation of hetero-bimetallic paddlewheel clusters in coordination polymers. Through this transformation, which involves the cleavage and formation of different coordination bonds, two different Cu(ii)–Zn(ii) and Cu(ii)–Ni(ii) paddlewheel units exhibiting a 1 : 1 metal ratio were created. [ABSTRACT FROM AUTHOR]

Herein we report a versatile methodology for engineering metallic Janus MOF particles based on desymmetrization at interfaces, whereby each MOF particle is partially coated with a desired metal. We demonstrate that it enables the fabrication of homogeneous Janus MOF particles according to the MOF (ZIF-8, UiO-66 or UiO-66-SH), the metal (Au, Co or Pt), the MOF particle size (from the micrometer to the submicrometer regime) and the metal-film thickness (from 5 nm to 50 nm) employed. We anticipate that our strategy could be applied to impart new functionalities to MOFs, including asymmetric functionalization, magnetic-guidance and motorization. [ABSTRACT FROM AUTHOR]

The reaction of the chiral dipeptide glycyl- L( S)-glutamate with CoII ions produces chiral ladders that can be used as rigid 1D building units. Spatial separation of these building units with linkers of different lengths allows the engineering of homochiral porous MOFs with enhanced pore sizes, pore volumes, and surface areas. This strategy enables the synthesis of a family of isoreticular MOFs, in which the pore size dictates the enantioselective adsorption of chiral molecules (in terms of their size and enantiomeric excess). [ABSTRACT FROM AUTHOR]

We have prepared three distinct polyamino acid-based metal--organic frameworks (MOFs) with different chiralities and porosities using the same chemistry, by simply modifying the enantiomeric ratio of the chiral organic ligand used. [ABSTRACT FROM AUTHOR]

Multidrug‐resistant bacteria have become a global health problem for which new prophylactic strategies are now needed, including surface‐coatings for hospital spaces and medical equipment. This work reports the preparation and functional validation of a metal‐organic framework (MOF) based composite for the triggered controlled release of iodine, an antimicrobial element that does not generate resistance. It comprises beads of the iodophilic MOF UiO‐66 containing encapsulated gold nanorods (AuNRs) coated with a silica shell. Irradiation of the AuNRs with near‐infrared light (NIR) provokes a photothermal effect and the resultant heat actively liberates the iodine. After validating the performance of this composite, it is integrated into a polymer for the development of antibacterial films. This work assesses the adsorption of iodine into these composite films, as well as its passive long‐term release and active light‐triggered. Finally, this work validates the antibacterial activity of the composite films in vitro against gram‐positive and gram‐negative bacteria. The findings will surely inform the development of new prophylactic treatments. [ABSTRACT FROM AUTHOR]

Supraparticles are spherical colloidal crystals prepared by confined self‐assembly processes. A particularly appealing property of these microscale structures is the structural color arising from interference of light with their building blocks. Here, we assemble supraparticles with high structural order that exhibit coloration from uniform, polyhedral metal–organic framework (MOF) particles. We analyse the structural coloration as a function of the size of these anisotropic building blocks and their internal structure. We attribute the angle‐dependent coloration of the MOF supraparticles to the presence of ordered, onion‐like layers at the outermost regions. Surprisingly, even though different shapes of the MOF particles have different propensities to form these onion layers, all supraparticle dispersions show well‐visible macroscopic coloration, indicating that local ordering is sufficient to generate interference effects. [ABSTRACT FROM AUTHOR]

Supraparticles are spherical colloidal crystals prepared by confined self‐assembly processes. A particularly appealing property of these microscale structures is the structural color arising from interference of light with their building blocks. Here, we assemble supraparticles with high structural order that exhibit coloration from uniform, polyhedral metal–organic framework (MOF) particles. We analyse the structural coloration as a function of the size of these anisotropic building blocks and their internal structure. We attribute the angle‐dependent coloration of the MOF supraparticles to the presence of ordered, onion‐like layers at the outermost regions. Surprisingly, even though different shapes of the MOF particles have different propensities to form these onion layers, all supraparticle dispersions show well‐visible macroscopic coloration, indicating that local ordering is sufficient to generate interference effects. [ABSTRACT FROM AUTHOR]

The macrocyclic ligand DOTP is used to assemble a porous, heterometallic metal–organic framework (MOF). This MOF is miniaturizable down to the nanoscale to form stable colloids, is stable in physiological saline solution and cell culture media, and is not cytotoxic. It shows interesting relaxometric properties with r1 at high field (500 MHz) of 5 mM–1·s–1 and a maximum r1 = 15 mM–1·s–1 at 40 MHz, which remains constant over a wide pH range and increases with temperature. [ABSTRACT FROM AUTHOR]

Bond breaking is an essential process in chemical transformations and the ability of researchers to strategically dictate which bonds in a given system will be broken translates to greater synthetic control. Here, we report extending the concept of selective bond breaking to reticular materials in a new synthetic approach that we call Clip‐off Chemistry. We show that bond‐breaking in these structures can be controlled at the molecular level; is periodic, quantitative, and selective; is effective in reactions performed in either solid or liquid phases; and can occur in a single‐crystal‐to‐single‐crystal fashion involving the entire bulk precursor sample. We validate Clip‐off Chemistry by synthesizing two topologically distinct 3D metal‐organic frameworks (MOFs) from two reported 3D MOFs, and a metal‐organic macrocycle from metal‐organic polyhedra (MOP). Clip‐off Chemistry opens the door to the programmed disassembly of reticular materials and thus to the design and synthesis of new molecules and materials. [ABSTRACT FROM AUTHOR]

Bond breaking is an essential process in chemical transformations and the ability of researchers to strategically dictate which bonds in a given system will be broken translates to greater synthetic control. Here, we report extending the concept of selective bond breaking to reticular materials in a new synthetic approach that we call Clip‐off Chemistry. We show that bond‐breaking in these structures can be controlled at the molecular level; is periodic, quantitative, and selective; is effective in reactions performed in either solid or liquid phases; and can occur in a single‐crystal‐to‐single‐crystal fashion involving the entire bulk precursor sample. We validate Clip‐off Chemistry by synthesizing two topologically distinct 3D metal‐organic frameworks (MOFs) from two reported 3D MOFs, and a metal‐organic macrocycle from metal‐organic polyhedra (MOP). Clip‐off Chemistry opens the door to the programmed disassembly of reticular materials and thus to the design and synthesis of new molecules and materials. [ABSTRACT FROM AUTHOR]

Charge-assisted H-bond associations between [Zr(C2O4)4]4− preformed anionic complexes and several ditopic monocations based on the benzimidazolium motif ([H2-Bim]+ cations) have been envisioned for the tentative elaboration of 3D H-bonded and open-framework architectures. Reactions involving [Zr(C2O4)4]4− units and [H2-Bim]+ cations in (a) a charge stoichiometric amount, (b) a defect, and (c) an excess of cation afforded three different compounds of formula {(H2-Bim)4[Zr(C2O4)4]}·H2O (1), {K(H2O)(H2-Bim)3[Zr(C2O4)4]}·2H2O (2), and {(H2-Bim)4[Zr(C2O4)4]} (3), respectively. Structural analyses revealed marked differences in their formulations and in their supramolecular connectivities. These results traduce the importance of cation concentration on the association schemes. Among them, compound 3 exhibits a chiral structure analyzed as resulting from the interpenetration of two 3D H-bonded homochiral and independent networks. To avoid this interpenetration and to study the influence of the cation substitution for fixed experimental parameters, 2-amino and 2-methyl substituted [H2-Bim]+ cations ([H2-2-NH2Bim]+ and [H2-2-MeBim]+, respectively) have been envisioned as cationic building-blocks. Structure analysis for the corresponding materials ({(H2-2-NH2Bim)4[Zr(C2O4)4]} (4) and {(H2-2-MeBim)4[Zr(C2O4)4]}·7H2O (5), respectively) revealed that the amino group contributes in the H-bonded framework, whereas the methyl impairs the formation of H-bonds between the cations and the anions. These observations contribute to explain the marked structural differences between 3 and these two networks. With 5-methyl- and 5-chlorobenzimidazolium cations ([H2-5-MeBim]+ and [H2-5-ClBim]+, respectively), [Zr(C2O4)4]4− is converted into its binuclear version, [Zr2(C2O4)7]6−, yielding {(H2-5-MeBim)6[Zr2(C2O4)7]}·3H2O (6) with a close-packed 3D-network and {(H2-5-ClBim)6[Zr2(C2O4)7]}·13.5H2O (7) with an open-framework architecture (potential solvent accessible void volume of 23%). For 7, Cl···π interactions contribute to the cohesion of the 3D supramolecular architecture. Charge-assisted H-bond associations between [Zr(C2O4)4]4− anionic complexes and several ditopic monocations based on the benzimidazolium motif ([H2-Bim]+) have been envisioned for the tentative elaboration of 3D H-bonded and open-framework architectures. The result of charge stoichiometry and D-H/A site stoichiometry on the assemblage outcome has been investigated. [ABSTRACT FROM AUTHOR]

Two main questions are addressed in this study: (i) What increase of exchange interaction can be expected when replacing a paramagnetic metal ion with a heavier congener located farther down the periodic table (i.e., 3d-4d-5d), and (ii) for a molecular unit with higher coordination numbers, eight in the present case, how is the magnetic information transferred from the metal ion to its ligand set? Qualitative and quantitative investigations on a series of trimetallic cyano-bridged {MoV(CN)8-NiII} and {WV(CN)8-NiII} compounds revealed ferromagnetic interactions but with a strength modulated by the spin organization and their nature. DFT calculations have been used to examine the mechanism and strengths of the exchange coupling, as well as the influence of the local symmetry of the cyanometalate unit on the spin density distribution. Both the experimental and the calculated behaviors underline a noticeable difference between the Mo and the W derivatives (JMoNi = 26.9 cm-1 and JWNi = 37.3 cm-1) that is correlated to the spin density transferred from the metal center to its ligand set. It is also shown that the shape of the {M(CN)8} polyhedron may lead to nonequivalent CN sites and, consequently, to different strengths of the exchange interaction as a result of the position of the bridging ligands. [ABSTRACT FROM AUTHOR]

The use of covalent organic frameworks (COFs) in practical applications demands shaping them into macroscopic objects, which remains challenging. Herein, we report a simple three‐step method to produce COF aerogels, based on sol‐gel transition, solvent‐exchange, and supercritical CO2 drying, in which 2D imine‐based COF sheets link together to form hierarchical porous structures. The resultant COF aerogel monoliths have extremely low densities (ca. 0.02 g cm−3), high porosity (total porosity values of ca. 99 %), and mechanically behave as elastic materials under a moderate strain (<25–35 %) but become plastic under greater strain. Moreover, these COF aerogels maintain the micro‐ and meso‐porosity of their constituent COFs, and show excellent absorption capacity (e.g. toluene uptake: 32 g g−1), with high removal efficiency (ca. 99 %). The same three‐step method can be used to create functional composites of these COF aerogels with nanomaterials. [ABSTRACT FROM AUTHOR]

The use of covalent organic frameworks (COFs) in practical applications demands shaping them into macroscopic objects, which remains challenging. Herein, we report a simple three‐step method to produce COF aerogels, based on sol‐gel transition, solvent‐exchange, and supercritical CO2 drying, in which 2D imine‐based COF sheets link together to form hierarchical porous structures. The resultant COF aerogel monoliths have extremely low densities (ca. 0.02 g cm−3), high porosity (total porosity values of ca. 99 %), and mechanically behave as elastic materials under a moderate strain (<25–35 %) but become plastic under greater strain. Moreover, these COF aerogels maintain the micro‐ and meso‐porosity of their constituent COFs, and show excellent absorption capacity (e.g. toluene uptake: 32 g g−1), with high removal efficiency (ca. 99 %). The same three‐step method can be used to create functional composites of these COF aerogels with nanomaterials. [ABSTRACT FROM AUTHOR]

The use of covalent organic frameworks (COFs) in practical applications demands shaping them into macroscopic objects, which remains challenging. Herein, we report a simple three‐step method to produce COF aerogels, based on sol‐gel transition, solvent‐exchange, and supercritical CO2 drying, in which 2D imine‐based COF sheets link together to form hierarchical porous structures. The resultant COF aerogel monoliths have extremely low densities (ca. 0.02 g cm−3), high porosity (total porosity values of ca. 99 %), and mechanically behave as elastic materials under a moderate strain (<25–35 %) but become plastic under greater strain. Moreover, these COF aerogels maintain the micro‐ and meso‐porosity of their constituent COFs, and show excellent absorption capacity (e.g. toluene uptake: 32 g g−1), with high removal efficiency (ca. 99 %). The same three‐step method can be used to create functional composites of these COF aerogels with nanomaterials. [ABSTRACT FROM AUTHOR]

Use of preformed metal‐organic polyhedra (MOPs) as supermolecular building blocks (SBBs) for the synthesis of metal‐organic frameworks (MOFs) remains underexplored due to lack of robust functionalized MOPs. Herein we report the use of polycarboxylate cuboctahedral RhII‐MOPs for constructing highly‐connected MOFs. Cuboctahedral MOPs were functionalized with carboxylic acid groups on their 12 vertices or 24 edges through coordinative or covalent post‐synthetic routes, respectively. We then used each isolated polycarboxylate RhII‐MOP as 12‐c cuboctahedral or 24‐c rhombicuboctahedral SBBs that, upon linkage with metallic secondary building units (SBUs), afford bimetallic highly‐connected MOFs. The assembly of a pre‐synthesized 12‐c SBB with a 4‐c paddle‐wheel SBU, and a 24‐c SBB with a 3‐c triangular CuII SBU gave rise to bimetallic MOFs having ftw (4,12)‐c or rht (3,24)‐c topologies, respectively. [ABSTRACT FROM AUTHOR]

Use of preformed metal‐organic polyhedra (MOPs) as supermolecular building blocks (SBBs) for the synthesis of metal‐organic frameworks (MOFs) remains underexplored due to lack of robust functionalized MOPs. Herein we report the use of polycarboxylate cuboctahedral RhII‐MOPs for constructing highly‐connected MOFs. Cuboctahedral MOPs were functionalized with carboxylic acid groups on their 12 vertices or 24 edges through coordinative or covalent post‐synthetic routes, respectively. We then used each isolated polycarboxylate RhII‐MOP as 12‐c cuboctahedral or 24‐c rhombicuboctahedral SBBs that, upon linkage with metallic secondary building units (SBUs), afford bimetallic highly‐connected MOFs. The assembly of a pre‐synthesized 12‐c SBB with a 4‐c paddle‐wheel SBU, and a 24‐c SBB with a 3‐c triangular CuII SBU gave rise to bimetallic MOFs having ftw (4,12)‐c or rht (3,24)‐c topologies, respectively. [ABSTRACT FROM AUTHOR]

The structural deterioration of archetypical, well‐faceted metal–organic frameworks (MOFs) has been evaluated upon exposure to an acidic environment (H2S). Experimental results show that the structural damage highly depends on the nature of the hybrid network (e.g., softness of the metal ions, hydrophilic properties, among others) and the crystallographic orientation of the exposed facets. Microscopy images show that HKUST‐1 with well‐defined octahedral (111) facets is completely deteriorated, ZIF‐8 with preferentially exposed (110) facets exhibits a large external deterioration with the development of holes or cavities in the mesoporous range, whereas UiO‐66‐NH2 with (111) exposed facets, and PCN‐250 with (100) facets does not reflect any sign of surface damage. Despite the selectivity in the external deterioration, X‐ray diffraction and gas adsorption measurements confirm that indeed all MOFs suffer an important internal deterioration, these effects being more severe for MOFs based on softer cations (e.g., Cu‐based HKUST‐1 and Fe‐based PCN‐250). These structural changes have inevitable important effects in the final adsorption performance for CO2 and CH4 at low and high pressures. [ABSTRACT FROM AUTHOR]

Herein we report the design, synthesis, structural characterisation and functional testing of a series of Cu(II) coordination polymers containing flexible 4,4′-dithiodibenzoate ligand (4,4′-DTBA), with or without auxiliary N-donor ligands. Reaction of Cu(II) with 4,4′-DTBA yielded a 1D coordination polymer (1) based on Cu(II) paddlewheel units connected by 4,4′-DTBA, to form cyclic loop chains with intramolecular voids that exhibit reversible structural transformations upon subsequent solvent exchange in methanol to afford a new, crystalline, permanently-porous structure (1′). However, when the same reaction was run with pyridine, it formed a porous 2D coordination polymer (2). We have attributed the difference in dimensionality seen in the two products to the coordination of pyridine on the axial site of the Cu(II) paddle-wheel, which forces flexible 4,4′-DTBA to adopt a different conformation. Reactions in the presence of 4,4′-bipyridine (4,4′-bpy) afforded two new, flexible, 2D coordination polymers (3 & 4). Lower concentrations of 4,4′-bpy afforded a structure (3) built from 1D chains analogous to those in 1 and connected through 4,4′-bpy linkers coordinated to the axial positions. Interestingly, 3 showed reversible structural transformations triggered by either solvent exchange or thermal treatment, each of which yielded a new crystalline and permanently porous phase (3′). Finally, use of higher concentrations of 4,4′-bpy led to a coordination polymer (4) based on a distorted CuO3N2 trigonal bipyramid, rather than on the Cu(II) paddlewheel. The connection of these motifs by 4,4′-DTBA resulted in a zig-zag 1D chain connected through 4,4′-bpy ligands to form a porous 2D network. Interestingly, 4 also underwent reversible thermal transformation to yield a microporous coordination polymer (4′). [ABSTRACT FROM AUTHOR]

Adsorption‐based cooling systems, which can be driven by waste heat and solar energy, are promising alternatives to conventional, compression‐based cooling systems, as they demand less energy and emit less CO2. The performance of adsorption‐based cooling systems relates directly to the performance of the working pairs (sorbent–water). Accordingly, improvement of these systems relies on the continual discovery of new sorbents that enable greater mass exchange while requiring less energy for regeneration. Here, it is proposed that covalent‐organic frameworks (COFs) can replace traditional sorbents for adsorption‐based cooling. In tests mimicking standard operating conditions for industry, the imine‐based COF TpPa‐1 exhibits a regeneration temperature below 65 °C and a cooling coefficient of performance of 0.77 – values which are comparable to those reported for the best metal–organic framework sorbents described to date. Moreover, TpPa‐1 exhibits a photothermal effect and can be regenerated by visible light, thereby opening the possibility for its use in solar‐driven cooling. [ABSTRACT FROM AUTHOR]

Dynamic covalent bonds have been advantageously used to direct the synthesis of crystalline porous covalent organic frameworks (COFs). Unlike the standard synthetic protocols that involve harsh conditions, this work provides a high-yield "one-pot" green synthesis of imine-based COFs in water. Additionally, this aqueous synthesis can be performed under microwave conditions, considerably reducing the reaction time. [ABSTRACT FROM AUTHOR]

The production of metal–organic frameworks (MOFs) in the form of colloids has brought a paradigm shift in the design of new functional porous materials. Along with their intrinsic interest as porous solids, and contrary to their bulk powder counterparts, colloidal MOF particles can additionally be dispersed, shaped, functionalized, transformed and assembled in a controlled manner, conferring them further properties and applications. In this regard, zeolitic imidazolate framework-8 (ZIF-8) has become a pioneering MOF constituent of colloidal science. Today, the understanding of the role of synthetic parameters, learned after one decade of research, enables the production of monodisperse colloidal ZIF-8 particles with tunable dimensions and morphologies, offering the opportunity to develop new functional materials and composites with novel and promising functionalities. This tutorial review provides a useful guide to prepare ZIF-8 in its colloidal form, covering the published studies on the synthesis of homogeneous ZIF-8 particles with controlled size and shape. In addition, we present the most relevant advances in the development of colloidal ZIF-8 hybrid single-particles, reflecting the great potential and rapid development of this interdisciplinary research field. Finally, we highlight how formulation of ZIF-8 as colloids has led to the emergence of novel physicochemical phenomena that are useful for practical applications. This review aims at promoting the development of MOFs as colloids, taking ZIF-8 as a pioneering and successful case that clearly shows the benefits of bridging MOF chemistry and colloidal science. [ABSTRACT FROM AUTHOR]

This article discusses various research articles published in the journal Angewandte Chemie International Edition. One research article by Jorge Albalad, Inhar Imaz, Daniel Maspoch, et al. explores the use of bond scission as a synthetic tool to design new molecules and materials. They demonstrate this concept by obtaining unprecedented Rh(II)-based architectures through the disassembly of metal-organic polyhedra. Another research article by Weijie Yang, Hai-Long Jiang, et al. focuses on incorporating Pd nanoparticles into MOFs for high selectivity in CO esterification. Yoshinari Sawama, et al. report on sulfonium salt reagents for introducing deuterated alkyl groups in drug discovery, while Alexis Bordet, Walter Leitner, et al. discuss the adaptivity of a catalyst in the hydrogenation of heteroaromatics. Lastly, Leticia González, et al. investigate the photophysics of [Ru(bpy)3]2+ and propose a kinetic model for its behavior. [Extracted from the article]

This document, published in the journal Angewandte Chemie, discusses various research articles in the field of chemistry. One article explores the use of bond scission as a synthetic tool to design new molecules and materials, showcasing the synthesis of Rh(II)-based architectures through the disassembly of metal-organic polyhedra. Another article focuses on the incorporation of Pd nanoparticles into MOFs for high selectivity in CO esterification. Additionally, there is a report on the use of sulfonium salt reagents for introducing deuterated alkyl groups in drug discovery, and a study on adaptive catalysts that can switch selectivity in hydrogenation reactions. Lastly, the document mentions a research article on the photophysics of [Ru(bpy)3]2+, highlighting the importance of rate-determining states in understanding its behavior. [Extracted from the article]

Herein, we describe a new class of porous composites comprising metal–organic framework (MOF) crystals confined in single spherical matrices made of packed covalent‐organic framework (COF) nanocrystals. These MOF@COF composites are synthesized through a two‐step method of spray‐drying and subsequent amorphous (imine‐based polymer)‐to‐crystalline (imine‐based COF) transformation. This transformation around the MOF crystals generates micro‐ and mesopores at the MOF/COF interface that provide far superior porosity compared to that of the constituent MOF and COF components added together. We report that water sorption in these new pores occurs within the same pressure window as in the COF pores. Our new MOF@COF composites, with their additional pores at the MOF/COF interface, should have implications for the development of new composites. [ABSTRACT FROM AUTHOR]

Herein, we describe a new class of porous composites comprising metal–organic framework (MOF) crystals confined in single spherical matrices made of packed covalent‐organic framework (COF) nanocrystals. These MOF@COF composites are synthesized through a two‐step method of spray‐drying and subsequent amorphous (imine‐based polymer)‐to‐crystalline (imine‐based COF) transformation. This transformation around the MOF crystals generates micro‐ and mesopores at the MOF/COF interface that provide far superior porosity compared to that of the constituent MOF and COF components added together. We report that water sorption in these new pores occurs within the same pressure window as in the COF pores. Our new MOF@COF composites, with their additional pores at the MOF/COF interface, should have implications for the development of new composites. [ABSTRACT FROM AUTHOR]

A novel naphthalene-based 5·(BArF)8 capsule allows for the size-selective inclusion of C60 from fullerene mixtures. Its size selectivity towards C60 has been rationalized by its dynamic adaptability in solution that has been investigated by molecular dynamics. Additionally, 5·(BArF)8 encapsulates C60-derivatives such as C60-PCBM and N-methylpyrrolidine-C60. The latter can be separated from C60 since 5·(BArF)8 displays distinct affinity for them. [ABSTRACT FROM AUTHOR]

Herein, we exploit the well‐known swelling behaviour of metal–organic frameworks (MOFs) to create a self‐folding polymer film. Namely, we show that incorporating crystals of the flexible MOF MIL‐88A into a polyvinylidene difluoride (PVDF) matrix affords a polymer composite film that undergoes reversible shape transformations upon exposure to polar solvents and vapours. Since the self‐folding properties of this film correlate directly with the swelling properties of the MIL‐88A crystals, it selectively bends to certain solvents and its degree of folding can be controlled by controlling the relative humidity. Moreover, it shows a shape‐memory effect at relative humidity values from 60 % to 90 %. As proof of concept, we demonstrate that these composite films can lift cargo and can be used to assemble 3D structures from 2D patterns. Our strategy is a straightforward method for designing autonomous soft materials with folding properties that can be tuned by judicious choice of the constituent flexible MOF. [ABSTRACT FROM AUTHOR]

Herein, we exploit the well‐known swelling behaviour of metal–organic frameworks (MOFs) to create a self‐folding polymer film. Namely, we show that incorporating crystals of the flexible MOF MIL‐88A into a polyvinylidene difluoride (PVDF) matrix affords a polymer composite film that undergoes reversible shape transformations upon exposure to polar solvents and vapours. Since the self‐folding properties of this film correlate directly with the swelling properties of the MIL‐88A crystals, it selectively bends to certain solvents and its degree of folding can be controlled by controlling the relative humidity. Moreover, it shows a shape‐memory effect at relative humidity values from 60 % to 90 %. As proof of concept, we demonstrate that these composite films can lift cargo and can be used to assemble 3D structures from 2D patterns. Our strategy is a straightforward method for designing autonomous soft materials with folding properties that can be tuned by judicious choice of the constituent flexible MOF. MOF‐n‐Fold: The swelling behaviour of the metal–organic framework MIL‐88A is used to impart self‐folding properties to a polymer film upon exposure to polar solvents and vapours. The degree of folding of the resulting film can be controlled by changing the relative humidity, showing a shape memory effect. [ABSTRACT FROM AUTHOR]

Abstract: Supramolecular nanocapsule 1⋅(BArF)8 is able to sequentially and selectively entrap recently discovered U2@C80 and unprecedented Sc2CU@C80, simply by soaking crystals of 1⋅(BArF)8 in a toluene solution of arc‐produced soot. These species, selectively and stepwise absorbed by 1⋅(BArF)8, are easily released, obtaining highly pure fractions of U2@C80 and Sc2CU@C80 in one step. Sc2CU@C80 represents the first example of a mixed metal actinide‐based endohedral metallofullerene (EMF). Remarkably, the host–guest studies revealed that 1⋅(BArF)8 is able to discriminate EMFs with the same carbon cage but with different encapsulated cluster and computational studies provide support for these observations. [ABSTRACT FROM AUTHOR]