Search

Water stress has been one of the most serious threat to the crop growth, development and yield quality in agricultural fields. Timely and accurate diagnosis of crop water stress can greatly contribute to the precision irrigation for the crop resilience and yield. In this study, the research object was taken from the summer maize in the typical dryland agricultural area of northwest China. A six-channel multispectral sensor was mounted on a drone to obtain the remote sensing image data of summer maize at the nodulatione and staminate pulling stage in 2022. At the same time, the stomatal conductance and phenotypic parameters of summer maize were also collected. The background was removed by supervised classification. The canopy vegetation index and image texture were obtained using the gray-scale covariance matrix. The sensitive vegetation index, image texture and phenotypic parameters and their combinations were screened out by the Bayesian information criterion and full subset filtering. The summer maize stomatal conductance estimation model was constructed to combine the three types of machine learnings: the extreme learning machine, the random forest, and the back-propagation neural network. The optimal model was mapped to estimate the stomatal conductance. The Pearson correlation coefficient of vegetation index and stomatal conductance were significantly positively correlated, whereas, the canopy reflectance of summer maize was weakly negatively correlated. Different types of image textures at different wavelengths were correlated with the stomatal conductance, and the highest correlation was found in the 550 nm band. The Pearson correlation coefficients between morphological structure phenotypes (plant height, stem thickness and leaf area) and stomatal conductance of summer maize were 0.72, 0.58 and 0.69, respectively, where the three types of phenotypic parameters data were correlated well with stomatal conductance. Vegetation indices with spectral reflectance data were used to assess the overall health and moisture status of the vegetation. Image texture was used to capture the spatial distribution, texture and structural features of crops. Crop phenotypic parameters were then used to reflect the physiological and morphological responses of the crop in a three-dimensional manner, providing visual information about the growth and moisture of the vegetation. The decision coefficients of the crop water stress diagnostic models that constructed from the three information sources increased from 0.728 and 0.750 to 0.841, respectively, compared with the single or two combinations, indicating the great potential to stomatal conductance prediction. The optimal combination of indicators was screened by Bayesian information criterion and full subset screening: DWSI, NDVI, MEA, ENT, plant height and leaf area. The back-propagation neural network model with the three complementary information sources was the optimal model for the water stress diagnosis of summer maize (coefficient of determination of 0.841, root mean square error of 0.043 mol/(m2 ·s), and mean absolute error of 0.034 mol/(m² ·s)). The underestimation of stomatal conductance was significantly improved, compared with the rest models. The inverse map with the optimal model was widely applied to easily and accurately diagnose the crop water stress for the purpose of irrigation strategies and resource allocation. The finding can provide a feasible and accurate diagnosis of water stress in summer maize. [ABSTRACT FROM AUTHOR]

• The spectral characteristics of different types of deterioration are analyzed. • The normalized spectral index is constructed to preliminarily identify the deterioration. • The relationship between spectral reflectance and Schmidt rebound value is established. • The deterioration identification models are established based on hyperspectral image texture features. Deterioration investigation is an essential foundation for understanding the preservation status of stone cultural heritage, as well as for carrying out emergency and preventive conservation. Traditional photogrammetry method for deterioration investigation in stone cultural heritage heavily relies on personnel experience and has low automation. To accurately evaluate the degree of deterioration and quantify its scale, different algorithms are used to establish the rebound value prediction model and deterioration identification model based on the hyperspectral image. The effects of different wavelength selection methods and different classification models are compared. The results show that the rebound value inversion model constructed by CARS and PLS delivers the most accurate forecasts, with R2 being no less than 0.85. The maximum error of the model when applied in the field does not exceed 20%. Different types of deterioration can be initially identified by the normalized spectral index constructed from the 530 nm and 675 nm wavelengths. In addition, all four classification models based on hyperspectral imaging texture features can identify different types of deterioration. The LGBM model has the highest identification accuracy of 0.98. It also has good performance in field identification. This study provides a new method for deterioration investigation in stone cultural heritage. [ABSTRACT FROM AUTHOR]

Leaf Area Index (LAI) remains one of the most important forest structural attributes, as accurate estimation of LAI is crucial for predicting the growth of different species. Using the Partial Least Squares Regression (PLS-R) algorithm, this study investigated three image processing techniques to determine the best technique for estimating LAI using WorldView-3 imagery in the Midlands, KwaZulu-Natal province of South Africa. The PLS-R texture ratios model achieved the highest accuracy of R2 = 0.70, RMSE = 1.21 (2.32% of the mean measured LAI) and R2 = 0.72, RMSE = 1.26 (2.41% of the mean measured LAI) for the wet and dry seasons, respectively. This was followed by the PLS-R single texture band model that produced an accuracy of R2 = 0.65, RMSE = 1.35 (2.58% of the mean measured LAI) and R2 = 0.67, RMSE = 1.32 (2.52% of the mean measured LAI) for the wet and dry seasons, respectively. The PLS-R model using a combination of vegetation indices had the lowest estimation accuracy of R2 = 0.59, RMSE = 1.38 (2.64% of the mean measured LAI) and R2 = 0.60, RMSE = 1.40 (2.67% of the mean measured LAI) for the wet and dry seasons, respectively. The results of this study provided evidence that image texture ratios can be used to estimate LAI effectively. [ABSTRACT FROM AUTHOR]

The detection and monitoring of burned areas is crucial for vegetation recovery, loss assessment, and anomaly analysis. Although vegetation indices (VIs) have been widely used, accurate vegetation detection is challenging due to potential confusion in the spectra of different types of land cover and the interference of shadow effects caused by terrain. In this work, a novel Vegetation Anomaly Spectral Texture Index (VASTI) is proposed, which leverages the merits of both spectral and spatial texture features to identify abnormal pixels for extracting burned vegetation areas. The performance of the VASTI and its components, the Global Environmental Monitoring Index (GEMI), the Enhanced Vegetation Index (EVI), and the texture feature Autocorrelation (AC) were assessed based on a global dataset previously established, which contains 1774 pairs of samples from 10 different sites. The results illustrated that, compared with the GEMI and EVI, the VASTI improved the user's accuracy (UA), producer's accuracy (PA), and kappa coefficient across the ten study areas by approximately 5% to 10%. Compared to AC, the VASTI improved the accuracy of abnormal vegetation detection by 13% to 25%. The improvements were mainly caused by the fact that the incorporation of texture features can reduce spectral confusion between pixels. The innovation of the VASTI is that it considers the relationship between anomalous pixels and surrounding pixels by explicitly integrating spatial texture features with traditional spectral features. [ABSTRACT FROM AUTHOR]

With the rapid growth in the number of motor vehicles worldwide, the general public is beginning to attach importance to the quality inspection of wheels before they leave the factory. The current wheel defect detection systems are often cumbersome to operate and have low practical performance. Therefore, this research will use dynamic image segmentation, image texture feature extraction and Back Propagation neural network classification based on wheel image defect feature analysis algorithm to achieve automatic intelligent detection of automotive wheel defects. In this study, an intelligent detection system for automotive wheel defects is also designed, and finally the performance of the detection system is tested experimentally to illustrate its practicality. The experimental results show that the proposed intelligent detection system for automotive wheel defects based on image texture features identifies defects in wheel castings with a correct rate of 96% and a false positive rate of only 2%. This illustrates that the detection system proposed in this study has a high recognition rate and can provide a useful reference for the automotive industry inspection. [ABSTRACT FROM AUTHOR]

The microtexture of the asphalt pavement, which is critical for the skid resistance, is dictated by the microtexture of the coarse aggregates used in the surface courses. The existing standard test methods can only capture the combined measure of coarse aggregate surface texture which can be influenced by other aggregate characteristics such as shape and angularity. Consequently, the surface texture of aggregates cannot be quantified explicitly using these tests, and therefore image analysis methods that can extract textural features are gaining more significance. In the present study, various image texture analysis methods are evaluated to identify a reliable texture indicator. Methods include traditional statistical approaches such as histogram method, Grey Level Co-occurrence Matrix (GLCM) methods, and transform-based wavelet texture analysis. The image analysis was carried out on the grey-scale scanning electron microscope (SEM) images before and after accelerated polishing. To compare the image texture parameters, the average surface roughness (Sa) measured from aggregate surface profile data obtained from a 3D Optical Surface Profilometer (3D OSP) was considered as a direct measure of surface texture. A detailed correlation analysis with Sa indicates that the surface texture index (STI) from the wavelet analysis quantifies the microtexture more accurately compared to statistical methods. [ABSTRACT FROM AUTHOR]

In conjunction with pandemics, medical image data are growing exponentially. In some countries, hospitals collect biometric data from patients, such as fingerprints, iris, or faces. This data can be used for things like identity verification and security management. However, this medical data can be easily compromised by hackers. In order to prevent illegal tampering with medical images and invasion of privacy, a new texture fusion medical image encryption (TFMIE) algorithm derived from biometric images is proposed, which can encrypt the image using biometric information for storage or transmission. First, the medical image is decomposed into n-bit-planes by bit-plane decomposition. Secondly, a fusion image is generated by a biometric image with a circular local binary pattern and pixel-weighted average method. The fused image is further decomposed into n bit-planes through bit-plane decomposition and performs XOR operation with the original medical image in reverse order. Following the execution of the XOR operation, a new scrambling and diffusion algorithm based on a one-dimensional fractional trigonometric function (1DFTF) chaotic map is employed to form the cipher image. The experimental results show that compared with the existing methods, the average information entropy value of TFMIE is 7.99, and the average values of NPCR and UACI reach 0.9958 and 0.3346, respectively, which have strong key sensitivity, good robustness, and anti-attack ability. The method is lossless and has high transmission efficiency, which can meet the needs of medical big data encryption. [ABSTRACT FROM AUTHOR]

Gels combined with honey might generate new possibilities of textures in food development. This work explores the structural and functional properties of gelatin (5 g/100 g), pectin (1 g/100 g), and carrageenan (1 g/100 g) gels with different content of honey (0–50 g/100 g). Honey decreased the transparency of gels and made them more yellow‐greenish; all of them were firm and uniform, especially at the highest honey content. The water holding capacity increased (63.30–97.90 g/100 g) and moisture content, water activity (0.987–0.884) and syneresis (36.03–1.30 g/100 g) decreased with the addition of honey. This ingredient modified mainly the textural parameters of gelatin (Hardness: 0.82–1.35 N) and carrageenan gels (Hardness: 2.46–2.81 N), whereas only the adhesiveness and the liquid like‐behavior were increased in the pectin gels. Honey increased the solid behavior of gelatin gels (G': 54.64–173.37 Pa) but did not modify the rheological parameters of the carrageenan ones. Honey also had a smoothing effect on the microstructure of gels as observed in the scanning electron microscopy micrographs. This effect was also confirmed by the results of the gray level co‐occurrence matrix and fractal model's analysis (fractal dimension: 1.797–1.527; lacunarity: 1.687–0.322). The principal component and cluster analysis classified samples by the hydrocolloid used, except the gelatin gel with the highest content of honey, which was differentiated as a separate group. Honey modified the texture, rheology, and microstructure of gels indicating that it is possible to generate new products to be used in other food matrices as texturizers. [ABSTRACT FROM AUTHOR]

Accurate and reliable mapping of fire extent and severity is critical for assessing the impact of fire on vegetation and informing post-fire recovery trajectories. Classification approaches that combine pixel-wise and neighbourhood statistics including image texture derived from high-resolution satellite data may improve on current methods of fire severity mapping. Texture is an innate property of all land cover surfaces that is known to vary between fire severity classes, becoming increasingly more homogenous as fire severity increases. In this study, we compared candidate backscatter and reflectance indices derived from Sentinel 1 and Sentinel 2, respectively, together with grey-level-co-occurrence-matrix (GLCM)-derived texture indices using a random forest supervised classification framework. Cross-validation (for which the target fire was excluded in training) and target-trained (for which the target fire was included in training) models were compared to evaluate performance between the models with and without texture indices. The results indicated that the addition of texture indices increased the classification accuracies of severity for both sensor types, with the greatest improvements in the high severity class (23.3%) for the Sentinel 1 and the moderate severity class (17.4%) for the Sentinel 2 target-trained models. The target-trained models consistently outperformed the cross-validation models, especially with regard to Sentinel 1, emphasising the importance of local training data in capturing post-fire variation in different forest types and severity classes. The Sentinel 2 models more accurately estimated fire extent and were improved with the addition of texture indices (3.2%). Optical sensor data yielded better results than C-band synthetic aperture radar (SAR) data with respect to distinguishing fire severity and extent. Successful detection using C-band data was linked to significant structural change in the canopy (i.e., partial-complete canopy consumption) and is more successful over sparse, low-biomass forest. Future research will investigate the sensitivity of longer-wavelength (L-band) SAR regarding fire severity estimation and the potential for an integrated fire-mapping system that incorporates both active and passive remote sensing to detect and monitor changes in vegetation cover and structure. [ABSTRACT FROM AUTHOR]

To achieve the rapid recognition and accurate picking of Camellia oleifera fruits, a binocular vision system composed of two industrial cameras was used to collect images of Camellia oleifera fruits in natural environments. The YOLOv7 convolutional neural network model was used for iterative training, and the optimal weight model was selected to recognize the images and obtain the anchor frame region of the Camellia oleifera fruits. The local binary pattern (LBP) maps of the anchor frame region were extracted and matched by using the normalized correlation coefficient template matching algorithm to obtain the positions of the center point in the left and right images. The recognition experimental results showed that the accuracy rate, recall rate, mAP and F1 of the model were 97.3%, 97.6%, 97.7% and 97.4%. The recognition rate of the Camellia oleifera fruit with slight shading was 93.13%, and the recognition rate with severe shading was 75.21%. The recognition rate of the Camellia oleifera fruit was 90.64% under sunlight condition, and the recognition rate was 91.34% under shading condition. The orchard experiment results showed that, in the depth range of 400–600 mm, the maximum error value of the binocular stereo vision system in the depth direction was 4.279 mm, and the standard deviation was 1.142 mm. The detection and three-dimensional positioning accuracy of the binocular stereo vision system for Camellia oleifera fruits could basically meet the working requirements of the Camellia oleifera fruit-picking robot. [ABSTRACT FROM AUTHOR]

Objective: To study the clinical application value of enhanced computed tomography (CT) image texture parameters combined with serum carcinoembryonic antigen (CEA) and carbohydrate antigen 724 (CA724) in the recurrence and metastasis of esophageal cancer after operation. Methods: 86 patients with esophageal cancer who underwent operation treatment in our hospital from June 2019 to July 2021 were selected. The serum CEA and CA724 levels were detected before operation, and enhanced CT scanning was performed, the image data of the arteriovenous phase were analyzed by texture, and the mean value, median, standard deviation, unevenness, skewness, kurtosis, entropy and other parameters were recorded. The patients with esophageal cancer were followed up for 12 months after operation. According to whether they had recurrence and metastasis, they were divided into recurrence and metastasis group (n=32) and non-recurrence and metastasis group (n=54). The differences of texture parameters of enhanced CT images and serum CEA and CA724 levels in the two groups were compared. Receiver Operating characteristic (ROC) curve was used to analyze the predictive value of enhanced CT image texture parameters combined with serum CEA and CA724 for postoperative recurrence and metastasis of patients with esophageal cancer. Results: The arterial stage entropy in the recurrence and metastasis group was higher than that in the non-recurrence and metastasis group (P<0.05). The inevenness and entropy of venous phase in the recurrence and metastasis group were higher than those in the non-recurrence and metastasis group(P<0.05). The serum CEA and CA724 levels in the recurrence and metastasis group were higher than those in the non-recurrence and metastasis group (P<0.05). ROC curve showed that the combination of serum CEA and CA724 had significantly improved the arterial phase entropy, the venous phase unevenness, the area under the curve (AUC) of the entropy, the sensitivity and the specificity compared with the single application of each index, and the combined application had higher predictive efficiency. Conclusion: The serum CEA and CA724 levels and the increase of the entropy and the inhomogeneity and the arterial phase entropy and the inhomogeneity and the entropy of venous phase are related to the recurrence and metastasis of the postoperative patients with esophageal cancer. The combination of the arterial phase entropy and the inhomogeneity and the entropy of venous phase with the serum CEA and CA724 has of high application value in predicting the recurrence and metastasis of the postoperative patients with esophageal cancer. [ABSTRACT FROM AUTHOR]

The generation of Digital Elevation Models (DEMs) through stereogrammetry of optical satellite images has gained great popularity across various disciplines. For the analysis of these DEMs, it is important to understand the influence of the input data and different processing steps and parameters employed during stereo correlation. Here, we explore the effects that image texture, as well as the use of different matching algorithms (Block Matching (BM) and More Global Matching (MGM)), can have on optical DEMs derived from the flexible, open-source Ames Stereo Pipeline. Our analysis relies on a ∼2700 km 2 clip of a SPOT6 tristereo scene covering the hyperarid, vegetation-free Pocitos Basin and adjacent mountain ranges in the northwestern Argentine Andes. A large, perfectly flat salt pan (paleolake bed) that covers the center of this basin is characterized by strong contrasts in image texture, providing a unique opportunity to quantitatively study the relationship between image texture and DEM quality unaffected by topography. Our findings suggest that higher image texture, measured by panchromatic variance, leads to lower DEM uncertainty. This improvement continues up to ∼10 3 panchromatic variance, above which further improvements in DEM quality are independent of local image texture but instead may have sensor or geometric origins. Based on this behavior, we propose that image texture may serve as an important proxy of DEM quality prior to stereo correlation and can help to set adequate processing parameters. With respect to matching algorithms, we observe that MGM improves matching in low-texture areas and overall generates a smoother surface that still preserves complex, narrow (i.e., ridge and valley) features. Based on this sharper representation of the landscape, we conclude that MGM should be preferred for geomorphic applications relying on stereo-derived DEMs. However, we note that the correlation kernel selected for stereo-matching must be carefully chosen depending on local image texture, whereby larger kernels generate more accurate matches (less artifacts) at the cost of smoothing results. Overall, our analysis suggests a path forward for the processing and fusion of overlapping satellite images with suitable view-angle differences to improve final DEMs. [ABSTRACT FROM AUTHOR]

Background: The placental pathological changes in hypertensive disorders of pregnancy (HDP) starts early in pregnancy, the deep convolutional neural networks (CNN) can identify these changes before its clinical manifestation. Objective: To compare the placental quantitative ultrasound image texture of women with HDP to those with the normal outcome. Methods: The cases were enrolled in the first trimester of pregnancy, good quality images of the placenta were taken serially in the first, second, and third trimester of pregnancy. The women were followed till delivery, those with normal outcomes were controls, and those with HDP were cases. The images were processed and classified using validated deep learning tools. Results: Total of 429 cases were fully followed till delivery, 58 of them had HDP (13.5%). In the first trimester, there was a significant difference in the placental length (p = .033), uterine artery PI (p = .019), biomarkers PAPP-A (p = .001) PlGF (p = .013) and placental image texture (p = .001) between the cases and controls. In the second trimester the uterine artery PI, serum PAPPA (p = .010) and PlGF (p = .005) levels were significantly low among women who developed hypertension later on pregnancy. The image texture disparity between the two groups was highly significant (p < .001). The model "resnext 101_32x8d" had Cohen kappa score of 0.413 (moderate) and the accuracy score of 0.710 (good). In the first trimester the best sensitivity and specificity was observed for abnormal placental image texture (70.6% and 76.6%, respectively) followed by PlGF (64% and 50%, respectively), in the second trimester the abnormal image texture had the highest sensitivity and specificity (60.4% and 73.3%, respectively) followed by uterine artery PI (58.6% and 54.7%, respectively). Similarly in the third trimester, uterine artery PI had sensitivity and specificity of 60.3% and specificity of 50.7%, whereas the abnormal image texture had sensitivity and specificity of 83.5%. Conclusion: Ultrasound placental analysis using artificial intelligence (UPAAI) is a promising technique, would open avenues for more research in this field. [ABSTRACT FROM AUTHOR]

Monitoring and estimating the density of microalgae in a closed cultivation system is a critical task in culturing algae since it allows growers to optimally control both nutrients and cultivating conditions. Among the estimation techniques proposed so far, image-based methods, which are less invasive, nondestructive, and more biosecure, are practically preferred. Nevertheless, the premise behind most of those approaches is simply averaging the pixel values of images as inputs of a regression model to predict density values, which may not provide rich information of the microalgae presenting in the images. In this work, we propose to exploit more advanced texture features extracted from captured images, including confidence intervals of means of pixel values, powers of spatial frequencies presenting in images, and entropies accounting for pixel distribution. These diverse features can provide more information of microalgae, which can lead to more accurate estimation results. More importantly, we propose to use the texture features as inputs of a data-driven model based on L1 regularization, called least absolute shrinkage and selection operator (LASSO), where their coefficients are optimized in a manner that prioritizes more informative features. The LASSO model was then employed to efficiently estimate the density of microalgae presenting in a new image. The proposed approach was validated in real-world experiments monitoring the Chlorella vulgaris microalgae strain, where the obtained results demonstrate its outperformance compared with other methods. More specifically, the average error in the estimation obtained by the proposed approach is 1.54, whereas those obtained by the Gaussian process and gray-scale-based methods are 2.16 and 3.68, respectively [ABSTRACT FROM AUTHOR]

Tongue texture analysis is of importance to inspection diagnosis in traditional Chinese medicine (TCM), which has great application and irreplaceable value. The tough and tender classification for tongue image relies mainly on image texture of tongue body. However, texture discontinuity adversely affects the classification of the tough and tender tongue classification. In order to promote the accuracy and robustness of tongue texture analysis, a novel tongue image texture classification method based on image inpainting and convolutional neural network is proposed. Firstly, Gaussian mixture model is applied to separate the tongue coating and body. In order to exclude the interference of tongue coating on tough and tender tongue classification, a tongue body image inpainting model is built based on generative image inpainting with contextual attention to realize the inpainting of the tongue body image to ensure the continuity of texture and color change of tongue body image. Finally, the classification model of the tough and tender tongue inpainting image based on ResNet101 residual network is used to train and test. The experimental results show that the proposed method achieves better classification results compared with the existing methods of texture classification of tongue image and provides a new idea for tough and tender tongue classification. [ABSTRACT FROM AUTHOR]

Background: Tumor histomorphology analysis plays a crucial role in predicting the prognosis of resectable lung adenocarcinoma (LUAD). Computer-extracted image texture features have been previously shown to be correlated with outcome. However, a comprehensive, quantitative, and interpretable predictor remains to be developed. Methods: In this multi-center study, we included patients with resectable LUAD from four independent cohorts. An automated pipeline was designed for extracting texture features from the tumor region in hematoxylin and eosin (H&E)-stained whole slide images (WSIs) at multiple magnifications. A multi-scale pathology image texture signature (MPIS) was constructed with the discriminative texture features in terms of overall survival (OS) selected by the LASSO method. The prognostic value of MPIS for OS was evaluated through univariable and multivariable analysis in the discovery set (n = 111) and the three external validation sets (V1, n = 115; V2, n = 116; and V3, n = 246). We constructed a Cox proportional hazards model incorporating clinicopathological variables and MPIS to assess whether MPIS could improve prognostic stratification. We also performed histo-genomics analysis to explore the associations between texture features and biological pathways. Results: A set of eight texture features was selected to construct MPIS. In multivariable analysis, a higher MPIS was associated with significantly worse OS in the discovery set (HR 5.32, 95%CI 1.72–16.44; P = 0.0037) and the three external validation sets (V1: HR 2.63, 95%CI 1.10–6.29, P = 0.0292; V2: HR 2.99, 95%CI 1.34–6.66, P = 0.0075; V3: HR 1.93, 95%CI 1.15–3.23, P = 0.0125). The model that integrated clinicopathological variables and MPIS had better discrimination for OS compared to the clinicopathological variables-based model in the discovery set (C-index, 0.837 vs. 0.798) and the three external validation sets (V1: 0.704 vs. 0.679; V2: 0.728 vs. 0.666; V3: 0.696 vs. 0.669). Furthermore, the identified texture features were associated with biological pathways, such as cytokine activity, structural constituent of cytoskeleton, and extracellular matrix structural constituent. Conclusions: MPIS was an independent prognostic biomarker that was robust and interpretable. Integration of MPIS with clinicopathological variables improved prognostic stratification in resectable LUAD and might help enhance the quality of individualized postoperative care. [ABSTRACT FROM AUTHOR]

Purpose: The noninvasive monitoring of mild hyperthermia or thermal ablation is important to guarantee therapeutic safety and efficacy. The potential of ultrasound B-mode image texture features in monitoring temperature or coagulation zones studied in this article. Materials and methods: The experiments carried out on eighteen in vitro porcine liver samples heated from 20°C to 60°C in the water bath. The ultrasound radiofrequency signal at different temperature collected to reconstruct B-mode ultrasound images. The texture features based on gray level histogram (GLH), gray level co-occurrence matrix (GLCM), and gray level-gradient co-occurrence matrix (GGCM) extracted, respectively. Accordingly, we analyze the correlations between these texture features and temperature based on the experiment results. Results: The results showed that five texture feature parameters closely related to temperature, including mean gray scale of GLH, homogeneity of GLCM, hybrid entropy, inverse difference moment, and correlation of GGCM. Some of these feature parameters have correlation coefficients larger than 0.9 within the temperature range of 20°C to 60°C. Conclusions: The above-mentioned five feature parameters expected to apply for noninvasive monitoring of MH or TA. [ABSTRACT FROM AUTHOR]

In haptic interaction technology, texture haptic display is an important part. In order to perceive color image texture better, the haptic display methods of color texture based on force feedback and tactile feedback are proposed in this work. On the one hand, through the study of the physiological and psychological perception characteristics of color information, a new force rendering method of color image texture based on force feedback device is presented. The experimental results of color texture force perception show that the color texture force rendering algorithm in this paper works well. On the other hand, a color texture vibration tactile model is established based on the designed vibrotactile device. Its effectiveness is verified by vibration tactile perception experiment. Finally, for the color texture image of the real object surface, the force and vibrotactile display methods of color texture in this paper are used to conduct perception experiments and compared. [ABSTRACT FROM AUTHOR]

We provide sea ice classification maps of a sub-weekly time series of single (horizontal–horizontal, HH) polarization X-band TerraSAR-X scanning synthetic aperture radar (TSX SC) images from November 2019 to March 2020, covering the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) expedition. This classified time series benefits from the wide spatial coverage and relatively high spatial resolution of TSX SC data and is a useful basic dataset for future MOSAiC studies on physical sea ice processes and ocean and climate modeling. Sea ice is classified into leads, young ice with different backscatter intensities, and first-year ice (FYI) or multiyear ice (MYI) with different degrees of deformation. We establish the per-class incidence angle (IA) dependencies of TSX SC intensities and gray-level co-occurrence matrix (GLCM) textures and use a classifier that corrects for the class-specific decreasing backscatter with increasing IAs, with both HH intensities and textures as input features. Optimal parameters for texture calculation are derived to achieve good class separation while maintaining maximum spatial detail and minimizing textural collinearity. Class probabilities yielded by the classifier are adjusted by Markov random field contextual smoothing to produce classification results. The texture-based classification process yields an average overall accuracy of 83.70 % and good correspondence to geometric ice surface roughness derived from in situ ice thickness measurements (correspondence consistently close to or higher than 80 %). A positive logarithmic relationship is found between geometric ice surface roughness and TSX SC HH backscatter intensity, similar to previous C- and L-band studies. Areal fractions of classes representing ice openings (leads and young ice) show prominent increases in middle to late November 2019 and March 2020, corresponding well to ice-opening time series derived from in situ data in this study and those derived from satellite synthetic aperture radar (SAR) and optical data in other MOSAiC studies. [ABSTRACT FROM AUTHOR]

To a certain extent, whether a banknote can continue to circulate depends on how dirty it is. Therefor, a multi-layer support vector machines (MLSVMs) recognition method based on regional image texture features and threshold selection was proposed. Firstly, the contact image sensor (CIS) is used to collect the double-sided reflection gray-scale images of banknotes under blue light, green light, red light, infrared light and ultraviolet light, and the gray-scale images under green light transmission and infrared light transmission. Secondly, according to the pattern distribution of banknote images, the collected banknote image is divided into 8 areas with different sizes, and 22 texture feature parameters, such as entropy, dissimilarity and correlation of the banknote image, are extracted based on the gray-level co-occurrence matrix (GLCM) to describe the visual features of banknotes dirty degree. Then the 22 texture features by using GLCM under different light sources in different regions are selected through thresholds. Finally, MLSVMs are used to recognition the dirty degree of banknotes, and the simulation results show the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

The purpose of image smoothing is to improve the visual effect of the image and improve the clarity of the image, so as to make the image more conducive to computer processing and various feature analysis. Because the current technology fails to smooth the preprocessed image, it leads to the extraction of image texture features. The anti-interference performance is weak. For this reason, an image texture feature extraction technology based on the digital twin is proposed. Similarity analysis is carried out through the internal structure of the image, and the image is smoothed by the semisupervised learning method. On the basis of optimizing the denoised image through digital twinning, detect target feature points in the original image, then remove the abnormal and split feature points, assign the direction of image texture feature points, and build a fuzzy back propagation neural network model. Image texture feature extraction technology is implemented. The experimental results show that, compared with the traditional method, the proposed technique has a strong identification of original image features, and has a strong consistency with original data, and has a strong ability to resist the influence of abnormal data, noise, or redundant feature points. [ABSTRACT FROM AUTHOR]

In China, cemented paste backfill (CPB) is a common treatment method after the exploitation of basic energy. The homogeneity of slurry influences the performance of CPB. However, the online monitoring and characterization of homogeneity lack relevant technologies and unified standards. This article discusses an online image analysis technique applied to the online monitoring of cemented paste backfill mixing, which is based on the evolution of the texture of images taken at the surface of the mixing bed. First, the grayscale distribution of the image obtained by the high-speed camera in the CPB preparation process was analyzed by Matlab and its variance (s2) was solved, and the texture features of the image were analyzed by the variance of grayscale distribution. Then, a homogeneity discriminant model ( c s t ) was established. The results show that the variance value of the grayscale distribution of the slurry image increases rapidly at first, then gradually decreases, and becomes stable in the final stage since it turns a constant value. When the s2 value tends to be stable, the slurry gradually reaches homogenization, and the discriminant coefficient of paste homogenization based on the homogenization discriminant model reaches 0.05. The homogenization prediction of CPB proves to be consistent with the backfill performance comparison results. The evolution of the texture allows obtaining important information on the evolution of different formulations during mixing, which can be used for intelligent monitoring of CPB preparation process. [ABSTRACT FROM AUTHOR]

Carbon fiber plain-woven prepreg is one of the basic materials in the field of composite material design and manufacturing, in which defect identification is an important and easily neglected part of testing. Here, a novel high recognition rate inspection method for carbon fiber plain-woven prepregs is proposed for inspecting bubble and wrinkle defects based on image texture feature compression. The proposed method attempts to divide the image into non-overlapping block lattices as texture primitives and compress them into a binary feature matrix. Texture features are extracted using a gray level co-occurrence matrix. The defect types are further defined according to texture features by k-means clustering. The performance is evaluated in some existing computer vision and machine learning methods based on fiber recognition. By comparing the result, an overall recognition rate of 0.944 is achieved, which is competitive with the state-of-the-arts. [ABSTRACT FROM AUTHOR]

Equine odontoclastic tooth resorption and hypercementosis (EOTRH) is one of the horses' dental diseases, mainly affecting the incisor teeth. An increase in the incidence of aged horses and a painful progressive course of the disease create the need for improved early diagnosis. Besides clinical findings, EOTRH recognition is based on the typical radiographic findings, including levels of dental resorption and hypercementosis. This study aimed to introduce digital processing methods to equine dental radiographic images and identify texture features changing with disease progression. The radiographs of maxillary incisor teeth from 80 horses were obtained. Each incisor was annotated by separate masks and clinically classified as 0, 1, 2, or 3 EOTRH degrees. Images were filtered by Mean, Median, Normalize, Bilateral, Binomial, CurvatureFlow, LaplacianSharpening, DiscreteGaussian, and SmoothingRecursiveGaussian filters independently, and 93 features of image texture were extracted using First Order Statistics (FOS), Gray Level Co-occurrence Matrix (GLCM), Neighbouring Gray Tone Difference Matrix (NGTDM), Gray Level Dependence Matrix (GLDM), Gray Level Run Length Matrix (GLRLM), and Gray Level Size Zone Matrix (GLSZM) approaches. The most informative processing was selected. GLCM and GLRLM return the most favorable features for the quantitative evaluation of radiographic signs of the EOTRH syndrome, which may be supported by filtering by filters improving the edge delimitation. [ABSTRACT FROM AUTHOR]

The objective of this study was to evaluate the usefulness of machine learning based on image texture parameters to discriminate plum stone cultivars. The plums of cultivars 'Emper', 'Kalipso', and 'Polinka' were sampled. For each cultivar, one hundred images of plum stones were acquired using a digital camera. Processing of the plum stone images included the conversion of the images to individual color channels, image segmentation, region of interest (ROI) determination, and texture parameter extraction. Then, the discriminant analysis, including the texture selection and building discriminative models for the evaluation of the diversity of the plum stone cultivars, was carried out. The obtained results of discrimination of plum stone cultivars were very accurate and confirmed the effectiveness of image processing to evaluate the cultivar diversity. The most satisfactory results, reaching 96.67% for the average accuracy for three cultivars (97% for 'Emper', 'Kalipso', and 96% for 'Polinka'), were obtained for the models built based on combined textures selected from all the color channels using the IBk classifier. The developed procedure can be of practical importance for the correct identification of plum stone cultivars and avoiding their mixing to preserve cultivar uniformity. [ABSTRACT FROM AUTHOR]

This experiment aimed to find the relation between image texture features of pellets made of various lignocellulosic materials (wood, wheat straw, hay, giant miscanthus, prairie spartina, and giant knotweed) and their physico-mechanical properties (density, compressive energy, maximum compressive strength, modulus of elasticity). Using the Kruskal-Wallis's test, the effect of materials on these properties was examined. Texture features were derived from the grey-level co-occurrence matrix, grey-level run-length matrix, absolute gradient matrix, autoregressive model, and wavelet decomposition, resulting in 86 features, later reduced to 8 factors via explanatory factor analysis. These factors were used as predictors in regression models for physico-mechanical properties. The models for modulus of elasticity achieved R2 adj values of 0.91–0.99 (except for hay and wood), compressive stress models achieved 0.65–0.99 (excluding hay and wood), compressive energy models ranged from 0.60 to 0.97 (excluding hay), and density models ranged from 0.56 to 0.97 (excluding wood). The study confirmed a significant correlation between material type, texture parameters and compression resistance, suggesting this method could monitor pellet quality in production. [ABSTRACT FROM AUTHOR]

Solanum mauritianum is a highly destructive and resourceful plant invader, resulting in severe economic and ecological damage. Detecting and mapping the spatial distribution of S. mauritianum is a priority for effective management of commercial forest plantations. Therefore, image texture computed from a 2 m WorldView-2 image with sparse partial least squares discriminant analysis (SPLS-DA) and partial least squares discriminant analysis (PLS-DA) were developed and applied to detect and map co-occurring S. mauritianum within a commercial forest plantation. The results indicated that SPLS-DA successfully performed simultaneous variable selection and dimension reduction to yield an overall classification accuracy of 77%. In contrast, the PLS-DA model in conjunction with variable importance in the projection (VIP) yielded an overall classification accuracy of 67%. The most significant texture parameters selected by the SPLS-DA model were correlation, homogeneity and second moment, which were predominantly computed from the red, red edge and NIR bands. Overall, this study validates the potential of image texture integrated with SPLS-DA to effectively detect and map co-occurring S. mauritianum in a commercial forest plantation. [ABSTRACT FROM AUTHOR]

Land cover mapping is an important part of resource management, planning, and economic predictions. Improvements in remote sensing, machine learning, image processing, and object based image analysis (OBIA) has made the process of identifying land cover types increasingly faster and reliable but these advances have not been able to utilize all of the information encompassed within ultra-high (sub-meter) resolution imagery. There have been few known attempts to try and maximize this detailed information in high resolution imagery using advanced textural components. Hierarchical land classes are also rarely used as an attribute within the machine learning step of object-based image analysis. In this study we try to circumnavigate the inherent problems associated with high resolution imagery by combining well researched data transformations that aid the OBIA process with a seldom used texture transformation in Geographic Object Based Image Analyses (GEOBIA/OBIA) known as the Gabor Transform and the hierarchal organization of landscapes. We will observe the difference made in segmentation and classification accuracy of a random forest classifier when we fuse a Gabor transformed image to a Normalized Difference Vegetation Index (NDVI), high resolution multi-spectral imagery (RGB and NIR) and Light Detection and Ranging (LiDAR) derived canopy height model (CHM) within a riparian area in Southeast Iowa, United States. Additionally, we will observe the effects on classification accuracy when adding multi-scale land cover data to objects. Both, the addition of hierarchical information and Gabor textural information, could aid the GEOBIA process in delineating and classifying the same objects that human experts would delineate within this riparian landscape. [ABSTRACT FROM AUTHOR]

The use of ultrasound images to acquire breast cancer diagnosis information without invasion can reduce the physical and psychological pain of breast cancer patients and is of great significance for the diagnosis and treatment of breast cancer. There are some differences in the texture of breast cancer between benign and malignant cases. Therefore, this paper proposes an adaptive learning method based on ultrasonic image texture features to identify breast cancer. Specifically, firstly, we used dictionary learning and sparse representation to learn the ultrasonic image texture dictionary of benign and malignant cases, respectively, and then used the combination of the two dictionaries to represent the test image to obtain the texture distribution characteristics of the test image under the two dictionary representations, which called the sparse representation coefficient. Finally, these above features were filtered by sparse representation and sent to sparse representation classifier to establish benign and malignant classification model. 128 cases were randomly divided into training and testing sets according to 2: 1 for training and testing. The proposed method has achieved state-of-the-art results, with an accuracy of 0.9070 and the area under the receiver operating characteristic curve of 0.9459. The results demonstrate that the proposed method has the potential to be used in the clinical diagnosis of benign and malignant breast cancer. [ABSTRACT FROM AUTHOR]

In order to improve the retrieval ability of super-resolution multi-space block images, a texture retrieval method of block images based on depth hash is proposed. A texture feature analysis model of super-resolution multi-dimensional partitioned images is constructed, which combines texture spatial structure mapping method to realize depth information fusion of partitioned images, adopts edge feature detection and texture sparse feature clustering to realize texture hierarchical structure feature decomposition of super-resolution multi-dimensional partitioned images, and adopts deep image parameter analysis method to construct pixel structure recombination model of multi-dimensional partitioned images. Multi-dimensional texture parameter structure analysis and information clustering are realized for the collected partitioned images in multi-dimensional space. According to the information clustering results, the texture retrieval and extraction of partitioned images are realized by using the deep hash fusion algorithm, and the information detection and feature recognition capabilities of partitioned images in multi-dimensional space are improved. Simulation results show that this method has higher precision and better feature resolution in texture retrieval of partitioned images in multidimensional space, which improves the texture retrieval and recognition ability of partitioned images. [ABSTRACT FROM AUTHOR]

We present a new self-supervised monocular depth estimation method with multi-scale texture detail enhancement. Based on the observation that the image texture detail and the semantic information have essential significance on the depth estimation, we propose to provide them to the network to learn more sharpness and structural integrity of depth. Firstly, we generate the filtered images and detail images by multi-scale decomposition and use a deep neural network to automatically learn their weights to construct the texture detail enhanced image. Then, we consider the semantic features by putting deep features from the VGG-19 network into a self-attention network, guide the depth decoder network to focus on the integrity of objects in the scene. Finally, we propose a scale-invariant smooth loss to improve the structural integrity of the predicted depth. We evaluate our method on the KITTI 2015 and Make3D datasets and apply the predicted depth to novel view synthesis. The experimental results show that it has achieved satisfactory results compared with the existing methods. [ABSTRACT FROM AUTHOR]

The rendering effect of known visual image texture is poor and the output image is not always clear. To solve this problem, this paper proposes a visual image rendering based on scene visual understanding algorithm. In this approach, the color segmentation of known visual scene is carried out according to a predefined threshold, and the segmented image is processed by morphology. For this purpose, the extraction rules are formulated to screen the candidate regions. The color image is fused and filtered in the neighborhood, the pixels of the image are extracted, and the 2D texture recognition is realized by multilevel fusion and visual feature reconstruction. Using compact sampling to extract more target features, feature points are matched, the coordinate system of known image information are integrated into a unified coordinate system, and design images are generated to complete art-aided design. Simulation results show that the proposed method is more accurate than the original method for extracting the information of known images, which helps to solve the problem of clearly visible output images and improves the overall design effect. [ABSTRACT FROM AUTHOR]

Graph is a data structure that can represent complex relationships among data. Graph signal processing, unlike traditional signal processing, explicitly considers the structure and relationship among the signal samples. Graph wavelet transform can provide a multiscale analysis for the graph signal. It is well known that texture is a region property in an image, which is characterized with the intensity and relationship among pixels. In this context of the graph signal processing framework, an image texture can be considered as the signal on the graph. Therefore, a texture classification method based on graph wavelet transform is proposed. Specifically, image textures are decomposed into multiscale components by using two‐channel graph wavelet filter banks. Then the local singular value decomposition is applied to each subband. In order to improve the noise‐resistant ability, the maximum, mean and median values of the local singular values of graph‐wavelet transformation coefficients are extracted. Finally, the Weibull distributions are used to model those extracted values to describe the image textures. The experiments on the benchmark texture datasets are conducted to demonstrate the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

The use of innovative techniques in the classification of dried products for food processing and packaging systems simplifies and brings objectivity to the related processes. In addition, it helps consumers to access quality products. This study aimed to discriminate dried carrot samples subjected to 12 different combinations of drying and pretreatment by using innovative techniques based on chromatic attributes. The drying procedure consists of three different microwave powers (100, 200, 300 W), and pretreatments include 5% gum arabic solution, 5% gum sucrose solution, ultrasound application, and a control (no-pretreatment). The R , G , B , L , a , b , H , S, and V color channels were extracted from dried carrot images, and the exploration of classification models from selected color channels was an innovative aspect of the study. In all color channels, high overall accuracies were obtained with the values of 96.33, 96.50, and 97.00% for the logistic model tree, k-nearest neighbor, and random forest, respectively. The confusion matrix showed the lowest mixing among carrots dried at H-US (300 W + ultrasound) vs. H-C (300 W + control), H-S (300 W + sucrose) vs. H-C (300 W + control), and M-S (200 W + sucrose) vs. H-S (300 W + sucrose). The highest L, a, and b color values for the dried carrot slices were obtained as M-S (75.26), H-GA (30.93), and M-GA (44.75), respectively. In addition, hue values varied between 17.26 and 13.27, whereas saturation values varied between 50.93 and 59.90. The finding revealed that assessment of the effect of pretreatment and drying on carrot slices could be performed by machine learning and image analysis in a practical, rapid, and non-destructive manner. • Eight different machine learning algorithms was applied for classification. • 12 carrot classes subjected to various treatments were distinguished. • Innovative models built based on image textures were developed. • LMT, kNN, and RF was more successful for classification of dried carrot slices. • The developed procedure was non-destructive, objective, and effective. [ABSTRACT FROM AUTHOR]

Pronounced spin phase artifacts appear in diffusion-weighted imaging (DWI) with only minor subject motion. While DWI data corruption is often identified as signal drop out in diffusion-weighted (DW) magnitude images, DW phase images may have higher sensitivity for detecting subtle subject motion. This article describes a novel method to return a metric of subject motion, computed using an image texture analysis of the DW phase image. This Phase Image Texture Analysis for Motion Detection in dMRI (PITA-MDD) method is computationally fast and reliably detects subject motion from diffusion-weighted images. A threshold of the motion metric was identified to remove motion-corrupted slices, and the effect of removing corrupted slices was assessed on the reconstructed FA maps and fiber tracts. Using a motion-metric threshold to remove the motion-corrupted slices results in superior fiber tracts and fractional anisotropy maps. When further compared to a state-of-the-art magnitude-based motion correction method, PITA-MDD was able to detect comparable corrupted slices in a more computationally efficient manner. In this study, we evaluated the use of DW phase images to detect motion corruption. The proposed method can be a robust and fast alternative for automatic motion detection in the brain with multiple applications to inform prospective motion correction or as real-time feedback for data quality control during scanning, as well as after data is already acquired. [ABSTRACT FROM AUTHOR]

Signals with multiple components and fast-varying instantaneous frequencies reduce the readability of the time-frequency representations obtained by traditional synchrosqueezing transforms due to time-frequency blurring. We discussed a vertical synchrosqueezing transform, which is a second-order synchrosqueezing transform based on the short-time Fourier transform and compared it to the traditional short-time Fourier transform, synchrosqueezing transform, and another form of the second-order synchrosqueezing transform, the oblique synchrosqueezing transform. The quality of the time-frequency representation and the accuracy of mode reconstruction were compared through simulations and experiments. Results reveal that the second-order frequency estimator of the vertical synchrosqueezing transform could obtain accurate estimates of the instantaneous frequency and achieve highly energy-concentrated time-frequency representations for multicomponent and fast-varying signals. We also explored the application of statistical feature parameters of time-frequency image textures for the early fault diagnosis of roller bearings under fast-varying working conditions, both with and without noise. Experiments showed that there was no direct positive correlation between the resolution of the time-frequency images and the accuracy of fault diagnosis. However, the early fault diagnosis of roller bearings based on statistical texture features of high-resolution images obtained by the vertical synchrosqueezing transform was shown to have high accuracy and strong robustness to noise, thus meeting the demand for intelligent fault diagnosis. [ABSTRACT FROM AUTHOR]

In this article a new method based on MRF to classify image texture texton has been put forward. The constraint relationship between the center pixel feature value and the neighbor pixels feature value in MRF can reflect the features of image texture texton as well as different MRF parameters. Standard deviation based on the MRF parameter of the same category is the smallest. So we can use this property to classify image texture. By comparing the different experimental scheme and different classification method, we can come to the conclusion that the method of image texture element classification proposed in this paper has certain advantages, and it is a good method of image classification. [ABSTRACT FROM AUTHOR]

• A new feature extraction method based on Discrete Modal Decomposition is proposed. • Modal features can firstly be computed as the DMD coordinates of the image. • Modal features can secondly be computed using the DMD as a local transform process. • Experimental tests show the relevance of the method on a texture classification task, with lower extraction times than state-of-the art methods. Feature extraction is a key step in image processing for pattern recognition and machine learning processes. Its purpose lies in reducing the dimensionality of the input data through the computing of features which accurately describe the original information. In this article, a new feature extraction method based on Discrete Modal Decomposition (DMD) is introduced, to extend the group of space and frequency based features. These new features are called modal features. Initially aiming to decompose a signal into a modal basis built from a vibration mechanics problem, the DMD projection is applied to images in order to extract modal features with two approaches. The first one, called full scale DMD, consists in exploiting directly the decomposition resulting coordinates as features. The second one, called filtering DMD, consists in using the DMD modes as filters to obtain features through a local transformation process. Experiments are performed on image texture classification tasks including several widely used data bases, compared to several classic feature extraction methods. We show that the DMD approach achieves good classification performances, comparable to the state of the art techniques, with a lower extraction time. [ABSTRACT FROM AUTHOR]

In order to improve the accuracy of cirrhosis staging diagnosis based on MR images, a diagnostic method combining image texture feature extraction and classification algorithm is proposed. Firstly, the liver MR image is preprocessed, the region of interest (ROI) image patch is extracted therefrom, and the ROI image is quantized and compressed by the Lloyd algorithm. Then, the ROI image is filtered by a local binary pattern (LBP) operator, and then the texture feature of a 20-dimensional gray-level co-occurrence Matrix (GLCM) in four directions on the LBP image is extracted. Finally, MR image is classified by performing support vector machine (SVM) and the final diagnosis of liver cirrhosis is obtained. The experimental results show that the proposed method can accurately diagnose liver cirrhosis. [ABSTRACT FROM AUTHOR]

Modifications of algorithms for the classification of single-layer, vertical development clouds, and multilayer clouds based on a probabilistic neural network and a neuro-fuzzy classifier are proposed. Clouds are classified into 16 types according to the meteorological standard, including the combined subtypes of stratus, altocumulus, cirrus, and cirrostratus clouds. The article uses a description of clouds based on information about the texture of their images on satellite images from MODIS and its products with data on the physical parameters of clouds. The structure of classification algorithms is described. The results of the use of statistical models of image texture and physical parameters of clouds for initializing membership functions for a neural-fuzzy classifier are presented. Systems of effective classification characteristics for different classification algorithms are formed based on the GRAD modified truncated search method. The recognition results of single-layer, vertical development clouds, and multilayer clouds based on the corresponding test samples and full-size sets of MODIS satellite data with different spatial resolution are discussed. [ABSTRACT FROM AUTHOR]

Fractal image compression coding algorithm is a novel image compression technology; however, the long encoding time and unacceptable image reconstruction quality remain the primary obstacles in practical application. The purpose of this study is to improve the coding quality from the perspective of grey level transform and feature extraction. In this study, a novel orthogonal sparse fractal coding algorithm based on image texture feature is proposed. The authors define a normalised version as the new grey description feature of the image block so that two improved methods are scientifically combined in theory and algorithm. First, orthogonal sparse grey level transform based on sparse decomposition improves image reconstruction quality and decoding speed. Then, the similarity measure matrix, which stores the variance feature between range blocks and domain blocks, is used to reduce redundancies and encoding time. Simulation results show that the proposed algorithm in this study can obtain better image reconstruction quality and speed up encoding time significantly as compared to the conventional fractal coding schemes. [ABSTRACT FROM AUTHOR]

Sequence similarity analysis is a basic method in computational biological studies. Determining the similarity of biological sequences is a vital step in much research, such as exploring the evolutionary relationship among species, gene function analysis, protein structure prediction, and sequence retrieving. This paper introduces a method that uses the theory of the gray-level co-occurrence matrix, which is important in image texture analysis, to define and calculate the features of a DNA sequence. The proposed method can make a quantitative analysis and compute the defined texture features of a DNA sequence. Using these quantified sequence features, a similarity distance matrix can be computed and phylogenetic relationships also can be inferred. From the quantified features, we found that the DNA sequence of humans has the highest entropy and lowest energy. From human to chimpanzee, orangutan, gorilla, and other species, the entropy decreases and energy increases. The advantage of the proposed method is that it can compute multiple features inherent in each sequence. Furthermore, the defined features can be the key values or tags for each sequence for sequence retrieval and similarity analysis. [ABSTRACT FROM AUTHOR]

Machine learning plays an important role in computational intelligence and has been widely used in many engineering fields. Surface voids or bugholes frequently appearing on concrete surface after the casting process make the corresponding manual inspection time consuming, costly, labor intensive, and inconsistent. In order to make a better inspection of the concrete surface, automatic classification of concrete bugholes is needed. In this paper, a variable selection strategy is proposed for pursuing feature interpretability, together with an automatic ensemble classification designed for getting a better accuracy of the bughole classification. A texture feature deriving from the Gabor filter and gray-level run lengths is extracted in concrete surface images. Interpretable variables, which are also the components of the feature, are selected according to a presented cumulative voting strategy. An ensemble classifier with its base classifier automatically assigned is provided to detect whether a surface void exists in an image or not. Experimental results on 1000 image samples indicate the effectiveness of our method with a comparable prediction accuracy and model explicable. [ABSTRACT FROM AUTHOR]

Up-to-date information regarding impervious surface is valuable for urban planning and management. The objective of this study is to develop neural computing models used for automatic impervious surface area detection at a regional scale. To achieve this task, advanced optimizers of adaptive moment estimation (Adam), a variation of Adam called Adamax, Nesterov-accelerated adaptive moment estimation (Nadam), Adam with decoupled weight decay (AdamW), and a new exponential moving average variant (AMSGrad) are used to train the artificial neural network models employed for impervious surface detection. These advanced optimizers are benchmarked with the conventional gradient descent with momentum (GDM). Remotely sensed images collected from Sentinel-2 satellite for the study area of Da Nang city (Vietnam) are used to construct and verify the proposed approach. Moreover, texture descriptors including statistical measurements of color channels and binary gradient contour are employed to extract useful features for the neural computing model-based pattern recognition. Experimental result supported by statistical test points out that the Nadam optimizer-based neural computing model has achieved the most desired predictive accuracy for the data collected in the studied region with classification accuracy rate of 97.331%, precision = 0.961, recall = 0.984, negative predictive value = 0.985, and F1 score = 0.972. Therefore, the model developed in this study can be a helpful tool for decision-makers in the task of urban land-use planning and management. [ABSTRACT FROM AUTHOR]

A static gesture recognition algorithm is proposed based on a recursive graph of the upper triangular image texture, motivated by the low accuracy and robustness of existing algorithms. Firstly, the fingertip localization method based on contour curvature is used to obtain the palm region and then the gesture contour model is established. Secondly, a recurrence plot of the gesture contour sequence is built, which is constructed using the central point and the starting point coordinates. Finally, the texture recognition algorithm is applied to calculate the normalized distance between the recurrence plots of the gesture. The experimental results show that the proposed algorithm can achieve higher recognition accuracy under varying complex backgrounds and illumination. At the same time, when the gesture is in rotation, translation, or scaling, the algorithm has high robustness with a small amount of computation and high efficiency. [ABSTRACT FROM AUTHOR]

Blind noise-level estimation (NLE) is a fundamental issue in digital image processing. This paper provides a noise-level estimator for additive white Gaussian noise and multiplicative Gaussian noise using principal texture patches (PTPs). The proposed algorithm first identifies the principal texture of the noisy image by using the principal component analysis, and then, it chooses PTPs to calculate the noise level. The major contributions of this paper toward addressing the challenges in the NLE literature include: 1) analyzing the nonlinear relationship between the smallest eigenvalue, true noise level, number of chosen patches, and block size; 2) extracting PTPs; and 3) computing noise level using PTPs. The abundant experimental results show that the proposed method works well for various natural images over a large range of noise levels and it performs well for multiplicative noise. Compared with some state-of-the-art approaches, our method has the best performance and a faster running speed. [ABSTRACT FROM AUTHOR]

Surface texture of an image plays an imperative role in understanding objects such as aggregates, woods, grains, soils, trees, and houses. Fractal dimension (FD) helps to characterise these objects by quantifying their complex texture patterns. Differential box counting (DBC) is one of the popularly used methods to measure FD of a gray-scale image. However, it suffers from several limitations. So, this study introduces three improved DBC methods using three box heights based on eigenvalue, kurtosis, and skewness of an image respectively. These methods also use a new xy -plane shifting mechanism and a modified formula for computing n r. Moreover, weighted least squares (WLS) regression is adopted, where a trapezoidal membership function (TMF) based rule is proposed for assigning weights to each grid size. The image surface exhibits multifractal nature, hence two multifractal analysis methods are also analysed and included in the experiments. All the experiments are performed on three gray-scale image databases viz., the synthesized Fractal Brownian motion (FBM) images, natural texture images of Brodatz database, and images of Outex database that are captured at different rotations. Experimental results show that the proposed methods outperform some of the state-of-the-art methods. Unlabelled Image • Surface texture analysis of an image is done based on fractal dimension (FD). • FD is computed using an improved differential box counting method. • This work addresses the over-counting problem along z-direction. • The under-counting problem along xy-directionis is also solved using a xy-plane shiftiting mechanism. • Weighted least squares regression is utilized to obtain a better fitted line. [ABSTRACT FROM AUTHOR]

With the rapid development of digital phones, the digital image forensics system in current times has had a great impact. It will lead to a serious threat for us, and especially the emergence of the recaptured image makes the existing digital image forensics algorithm invalid. So, it needs an effective image detection algorithm for us to identify recaptured images. In this paper, a new detection algorithm of the recaptured image is presented based on gray level co-occurrence matrix by analyzing the differences between the real and recaptured images. In order to analyze the differences, a new image evaluation model was put forward in this paper, which is called image variance ratio. Firstly, the algorithm proposed extracted high-frequency and low-frequency information of images by wavelet transform, based on which we calculated the relative gray level co-occurrence matrices. Secondly, the features of gray level co-occurrence matrix were extracted. At last, the recaptured image was classified by the support vector machine according to the features. The experimental results showed the algorithm proposed can not only effectively identify the recaptured image obtained from different media but also have better identification rate. [ABSTRACT FROM AUTHOR]

In this study, the application of a backscattering imaging system with different approaches of transform-based image texture analysis for the evaluation of banana quality at different ripening stages was investigated with Wavelet, Gabor and Tamura transforms. The attenuated images of the fruits were acquired using Laser Light Backscattering Imaging (LLBI) with laser diodes emitting light at three wavelengths viz 532, 660, and 830 nm. The elasticity, chlorophyll index and soluble solids content (SSC) of each sample were measured as reference parameters by using a texture analyser, a Delta Absorbance (DA) meter, and a refractometer, respectively. The performance of the extracted features from the selected transform-based image texture analysis for analysing the quality parameters of the fruit was evaluated by means of an artificial neural network (ANN) and a support vector machine (SVM). The results indicated that there were significant changes of elasticity, chlorophyll index and SSC as the ripening stages increased. Prediction model analysis showed that the Wavelet transform exhibited the most reliable results for all of the reference parameters followed by Tamura and the Gabor transform. The results also revealed that analysis using an ANN approach recorded better performance than SVM as reflected by higher coefficient of determination (R 2 ) values. Thus, this study indicated that an LLBI system with transform-based image texture analysis coupled with computational intelligence techniques can be used for the evaluation of the quality of bananas. [ABSTRACT FROM AUTHOR]