Search

An interferometric nanobiosensor for the specific and label-free detection of the pollutant Irgarol 1051 directly in seawater has been settled. Due to the low molecular weight of Irgarol pollutant and its expected low concentration in seawater, the sensor is based on a competitive inhibition immunoassay. Parameters as surface biofunctionalization, concentration of the selective antibody and regeneration conditions have been carefully evaluated. The optimized immunosensor shows a limit of detection of only 3 ng/L, well below the 16 ng/L set by the EU as the maximum allowable concentration in seawater. It can properly operate during 30 assay-regeneration cycles using the same sensor biosurface and with a time-to-result of only 20 min for each cycle. Moreover, the interferometric nanosensor is able to directly detect low concentrations of Irgarol 1051 in seawater without requiring sample pre-treatments and without showing any background signal due to sea matrix effect. [ABSTRACT FROM AUTHOR]

This paper reports the development of a novel strategy for the easy immobilization of low molecular weight haptens to microarray platforms by coating with modified lipase molecules. The chimers consist of a dextran network covalently coupled to bacterial thermoalkalophilic lipase (BTL2). The relative high surface hydrophobicity of lipase allows easy immobilization of the conjugates onto glass planar waveguides previously modified with 1,1,1,3,3,3-hexamethyldisilazane, via nonspecific hydrophobic interactions, while the dextran layer provides a three-dimensional network that can be easily modified with different functional groups for further hapten immobilization on the glass substrate. The conjugates have been applied to the development of microarray biosensors for the simultaneous detection of three water pollutants namely, atrazine (ATR), a triazine pesticide, enrofloxacin (ENRO), a fluoroquinolone antimicrobial, and the hepatotoxin microcystin LR (MCLR). In an alternative approach, the chimeric hapten-dextran-BTL2 constructs were synthesized, purified and further immobilized on the hydrophobic transducer surface through their hydrophobic faces (Janus character). Detection of the three model targets was based in a competitive immunoassay format. A combination of detection and tracer antibodies was optimized to avoid significant cross-reactivity. Evanescent wave excitation was used to excite the fluorescent immunocomplexes formed on the planar waveguide and the identity of the target analyte was encoded by its location in the detection platform. The developed microarray allows the simultaneous detection of the target pollutants with IC 50 values, of 4.4 ± 0.7, 75 ± 9, 18 ± 4 ng L −1 for ATR, ENRO and MCLR, respectively and relative standard deviations (RSDs) lower than 15%. Waveguide functionalization using the dextran-BTL2 chimers is rapid, simple and allows the development of highly sensitive microarrays that can be easily applied to the multiplexed detection of pollutants in environmental samples. [ABSTRACT FROM AUTHOR]

The development of effective array biosensors relies heavily on careful control of the density of surface-immobilized ligands on the transducing platform. In this paper we describe the synthesis of new dextran-lipase conjugates for use in immobilizing low molecular weight haptens onto glass planar waveguides for immunosensor development. The conjugates were synthesized by immobilizing bacterial thermoalkalophilic lipases (Geobacillus thermocatenulatus lipase 2, BTL2) on agarose macroporous beads, followed by covalent coupling to dextran networks of variable molecular weight (1500-40000). The chimeras were immobilized via nonspecific hydrophobic interactions onto glass planar waveguides modified with 1,1,1,3,3,3-hexamethyldisilazane to obtain highly ordered and homogeneous molecular architectures as confirmed by atomic force microscopy. Microcystin LR (MCLR) was covalently bound to the dextran-BTL2 conjugates. The usefulness of this approach in immunosensor development was demonstrated by determining amounts of MCLR down to a few picograms per liter with an automated array biosensor and evanescent wave excitation for fluorescence measurements of attached DyLight649-labeled secondary antibody. Modifying BTL2 with dextrans of an increased molecular weight (>6000) provided surfaces with an increased loading capacity that was ascribed to the production of three-dimensional surfaces by the effect of analyte binding deep in the volume, leading to expanded dynamic ranges (0.09-136.56 ng L-1), lower limits of detection (0.007 ± 0.001 ng L-1), and lower IC50 values (4.4 ± 0.7 ng L-1). These results confirm the effectiveness of our approach for the development of high-performance biosensing platforms. [ABSTRACT FROM AUTHOR]

surface plasmon resonance (SPR) biosensor for the detection of microcystins (MCs) in drinking water has been developed. Several assay formats have been evaluated. The selected format is based on a competitive inhibition assay, in which microcystin-LR (MCLR) has been covalently immobilized onto the surface of an SPR chip functionalized with a self-assembled monolayer. The influence of several factors affecting sensor performance, such as the nature and concentration of the antibody, the composition of the carrier buffer, and the blocking and regeneration solutions, has been evaluated. The optimized SPR biosensor provides an IC 0.67 ± 0.09 µg L, a detection limit of 73 ± 8 ng L, and a dynamic range from 0.2 to 2.0 µg L for MCLR. Cross-reactivity to other related MCs, such as microcystin-RR (88%) and microcystin-YR (94%), has also been measured. The SPR biosensor can perform four simultaneous determinations in 60 min, and each SPR chip can be reused for at least 40 assay-regeneration cycles without significant binding capacity loss. The biosensor has been successfully applied to the direct analysis of MCLR in drinking water samples, below the provisional guideline value of 1 µg L established by the World Health Organization for drinking water. [ABSTRACT FROM AUTHOR]

Specific polyclonal antibodies against s-triazine herbicides were obtained by preparing immunogens coupling home-synthesized haptens derivatives of simazine (6-chloro- N-ethyl- N′-ethyl-1,3,5-triazine-2,4-diamine) to lysine groups of hemocyanin from keyhole limpets and bovine serum albumin carrier proteins. Three highly sensitive rabbit antisera were obtained and evaluated with a battery of six enzyme tracers derived from triazine structures in an optimized ELISA format. The antiserum As8 and the HRP-2f tracer, which yield the best assay sensitivity for simazine (detection limit 0.11 ± 0.02 μg L−1, IC50 0.88 ± 0.04 μg L−1), were applied to the development of a sensitive flow-through immunoassay for the analysis of this herbicide. The automated assay was based on a direct competitive immunosorbent assay and fluorescence detection. The optimized method presents an IC50 value of 0.35 ± 0.04 μg L−1 with a detection limit of 1.3 ± 0.9 ng L−1 and a dynamic range from 0.010 to 7.5 μg L−1 simazine. The generic nature of the antiserum was shown by good relative cross-reactivities with other triazines such as atrazine (420%) or propazine (130%) and a lower response to terbutylazine (6.4%) and desethyl-atrazine (2.2%). No cross-reactivity was obtained for nonrelated pesticides such as 2,4-dichlorophenoxyacetic acid or linuron and the assay could be applied as a screening method for triazine herbicides. The total analysis time was 30 min per determination and the immunosensor could be reused for more than 150 cycles without significant loss of activity. The immunosensor has been successfully applied to the direct analysis of simazine in surface water samples at the nanogram per liter level. The results obtained by comparative analysis of the immunosensor with a chromatographic procedure for triazines showed a close correspondence. [ABSTRACT FROM AUTHOR]

• Novel microfluidic cartridge for an optical sensor has been designed and fabricated. • Rotary valve has been implemented for an autonomous fluid delivery system. • Detection of Irgarol 1051 and Tetracycline, as proof of concept, accomplishing EU legislation. • Optical and data acquisition integration in aMZI sensor for on-line monitoring. We have developed a photonic nano-immunosensor platform for the on-site analysis of harmful organic ocean pollutants, intended to be allocated in stand-alone buoys. The main aim is bringing the monitoring tools directly to the contaminated place, resulting in cost and time savings as compared to the standard analytical techniques. As sensor we have employed an integrated asymmetric Mach-Zehnder interferometer (aMZI) of micro/nano dimensions, based on silicon photonic technology. In order to obtain a multiplexed system, a four-channel microfluidic cell has been designed, manufactured and incorporated in the miniaturized sensor. Additionally, a microfluidic delivery module enabling automatic sample analysis has been designed, evaluated and assembled. Moreover, we have implemented the optical interconnections of the sensor chip by fiber optics, as well the electronics and the required software and data processing. Pollutant detection is based on a competitive immunoassay using bioreceptors previously biofunctionalized on the aMZI sensor arms and incubation with a specific antibody. As proof of concept, two types of pollutants have been analysed: the biocide Irgarol 1051, and the antibiotic Tetracycline. Results show limits of detection in the range of few ng/mL, accomplished the European legislation. [ABSTRACT FROM AUTHOR]

The field of environmental monitoring has experienced a substantial progress in the last years but still the on-site control of contaminants is an elusive problem. In addition, the growing number of pollutant sources is accompanied by an increasing need of having efficient early warning systems. Several years ago biosensor devices emerged as promising environmental monitoring tools, but their level of miniaturization and their fully operation outside the laboratory prevented their use on-site. In the last period, nanophotonic biosensors based on evanescent sensing have emerged as an outstanding choice for portable point-of-care diagnosis thanks to their capability, among others, of miniaturization, multiplexing, label-free detection and integration in lab-on-chip platforms. This review covers the most relevant nanophotonic biosensors which have been proposed (including interferometric waveguides, grating-couplers, microcavity resonators, photonic crystals and localized surface plasmon resonance sensors) and their recent application for environmental surveillance. [ABSTRACT FROM AUTHOR]

Antibiotics are a class of pharmaceuticals that are of great interest due to the large volumes of these substances that are consumed in both human and veterinary medicine, and due to their status as the agents responsible for bacterial resistance. They can be present in foodstuffs and in environmental samples as multicomponent chemical mixtures that exhibit a wide range of mechanisms of action. Moreover, they can be transformed into different metabolites by the action of microorganisms, as well as by other physical or chemical means, resulting in mixtures with higher ecotoxicities and risks to human health than those of the individual compounds. Therefore, there is growing interest in the availability of multiclass methods for the analysis of antimicrobial mixtures in environmental and food samples at very low concentrations. Liquid chromatography (LC) has become the technique of choice for multiclass analysis, especially when coupled to mass spectrometry (LC-MS) and tandem MS (LC-MS2). However, due to the complexity of the matrix, in most cases an extraction step for sample clean-up and preconcentration is required before analysis in order to achieve the required sensitivities. This paper reviews the most recent developments and applications of multiclass antimicrobial determination in environmental and food matrices, emphasizing the practical aspects of sample preparation for the simultaneous extraction of antimicrobials from the selected samples. Future trends in the application of LC-MS-based techniques to multiclass antibiotic analysis are also presented. [ABSTRACT FROM AUTHOR]