Search

In the framework of the model intercomparison study—Asia Phase II (MICS2), where eight models are compared over East Asia, this paper studies the influence of different parameterizations used in the aerosol module on the aerosol concentrations of sulfate and nitrate in . An intracomparison of aerosol concentrations is done for March 2001 using different configurations of the aerosol module of one of the model used for the intercomparison. Single modifications of a reference setup for model configurations are performed and compared to a reference case. These modifications concern the size distribution, i.e. the number of sections, and physical processes, i.e. coagulation, condensation/evaporation, cloud chemistry, heterogeneous reactions and sea-salt emissions. Comparing monthly averaged concentrations at different stations, the importance of each parameterization is first assessed. It is found that sulfate concentrations are little sensitive to sea-salt emissions and to whether condensation is computed dynamically or by assuming thermodynamic equilibrium. Nitrate concentrations are little sensitive to cloud chemistry. However, a very high sensitivity to heterogeneous reactions is observed. Thereafter, the variability of the aerosol concentrations to the use of different chemistry transport models (CTMs) and the variability to the use of different parameterizations in the aerosol module are compared. For sulfate, the variability to the use of different parameterizations in the aerosol module is lower than the variability to the use of different CTMs. However, for nitrate, for monthly averaged concentrations averaged over four stations, these two variabilities have the same order of magnitude. [Copyright &y& Elsevier]

This paper presents a modal aerosol model (MAM) developed to be used in three dimensional air quality models. MAM, which represents the aerosol distribution with four modes, has the advantage of simplicity and speed efficiency associated to modal models, while mass transfer is modeled with a dynamic approach. To assess the ability of MAM to represent mass transfer, MAM is compared to a size-resolved model based on the dynamic approach and to a version of MAM based on an equilibrium approach. Comparisons are done using measurements of inorganic species made in Japan as initial conditions. Furthermore, it is shown that MAM combined with a well chosen mode splitting scheme is able to deal accurately with the simultaneous occurrence of strong nucleation/condensation and coagulation, as may be observed in high nucleation episodes. [ABSTRACT FROM AUTHOR]

Examines the flow in a high-speed transonic centrifugal impeller using particle image velocimetry (PIV). Phase locked measurement; Analysis of velocity field over one blade pitch of the inducer; Comparison between PIV and laser velocimeters.

Examines the application of pressure sensitive paint (PSP) measurement to a low-solidity circular cascade diffuser of a transonic centrifugal compressor. Absorption of oxygen concentration on a silica-gel thin-layer chromatography sheet; Change in luminescent intensity during a surge condition; Time-response of PSP.

A method for wireless data transmission from an implantable image sensor through the biological tissue as a conductive medium is reported. A battery‐powered implantable image sensor unit is dipped in phosphate‐buffered saline (PBS) as the simulant body solution and received the data signal through the PBS. Its equivalent circuit model for simulation is also proposed. The transmitted signal waveforms are in good agreement with the simulation result. Image recovery from the signal obtained from the implantable image sensor received outside the PBS is also demonstrated. [ABSTRACT FROM AUTHOR]

A method for wireless data transmission from an implantable image sensor through the biological tissue as a conductive medium is reported. A battery-powered implantable image sensor unit is dipped in phosphate-buffered saline (PBS) as the simulant body solution and received the data signal through the PBS. Its equivalent circuit model for simulation is also proposed. The transmitted signal wave-forms are in good agreement with the simulation result. Image recovery from the signal obtained from the implantable image sensor received outside the PBS is also demonstrated. [ABSTRACT FROM AUTHOR]

This paper focuses on the comparison of chemical deposition of eight regional chemical models used in Model Inter-Comparison Study for Asia (MICS-Asia) II. Monthly-mean depositions of chemical species simulated by these models, including dry deposition of SO2, HNO3, NH3, sulfate, nitrate and ammonium and wet deposition of SO4 2−, NO3 − and NH4 +, have been provided for four periods (March, July, December 2001 and March 2002) in this work. Observations at 37 sites of the Acid Deposition Monitoring Network in East Asia (EANET) are compared with SO4 2−, NO3 − and NH4 + wet deposition model results. Significant correlations appeared between the observation and computed ensemble mean of participant models. Also, differences among modeled sulfur and nitrogen dry depositions have been studied at the EANET sites. Based on the analysis of acid deposition for various species from different models, total depositions of sulfur (SO2 and sulfate) and nitrogen (nitrate and ammonium) have been evaluated as the ensemble mean of the eight models. In general, all models capture the observed spatial distribution of sulfur and nitrogen deposition, although the absolute values may differ from measurements. High deposition often occurs in eastern China, Japan, the Republic of Korea, Thailand, Vietnam, Philippines and other parts of Southeast Asia. The magnitude of model bias is quite large for many of the models. In examining the reasons for model–measurement disagreement, we find that differences in chemical processes, deposition parameterization, and modeled precipitation are the main reasons for large model disparities. [Copyright &y& Elsevier]

Eight regional Eulerian chemical transport models (CTMs) are compared with each other and with an extensive set of observations including ground-level concentrations from EANET, ozone soundings from JMA and vertical profiles from the TRACE-P experiment to evaluate the models’ abilities in simulating O3 and relevant species (SO2, NO, NO2, HNO3 and PAN) in the troposphere of East Asia and to look for similarities and differences among model performances. Statistical analysis is conducted to help estimate the consistency and discrepancy between model simulation and observation in terms of various species, seasons, locations, as well as altitude ranges. In general, all models show a good skill of simulating SO2 for both ground level and the lower troposphere, although two of the eight models systematically overpredict SO2 concentration. The model skills for O3 vary largely with region and season. For ground-level O3, model results are best correlated with observations in July 2001. Comparing with O3 soundings measured in the afternoon reveals the best consistency among models in March 2001 and the largest disparity in O3 magnitude in July 2001, although most models produce the best correlation in July as well. In terms of the statistics for the four flights of TRACE-P experiment, most models appear to be able to accurately capture the variability in the lower troposphere. The model performances for NO x are relatively poor, with lower correlation and with almost all models tending to underpredict NO x levels, due to larger uncertainties in either emission estimates or complex chemical mechanism represented. All models exhibit larger RMSE at altitudes <2km than 2–5.5km, mainly due to a consistent tendency of these models towards underprediction of the magnitude of intense plumes that often originate from near surface. Relatively lower correlation at altitudes 2–5.5km may be attributed to the models’ limitation in representing convection or potential chemical processes. Most of the key features in species distribution have been consistently reproduced by the participating models, such as the O3 enhancement in the western Pacific Ocean in March and in northeast Asia in July, respectively, although the absolute model values may differ considerably from each other. Large differences are found among models in the southern parts of the domain for all the four periods, including southern China and northern parts of some Southeast Asia countries where the behaviors of chemical components and the ability of these models are still not clearly known because of a lack of observational databases. [Copyright &y& Elsevier]

Results from the Model Intercomparison Study Asia Phase II (MICS-Asia II) are presented. Nine different regional modeling groups simulated chemistry and transport of ozone (O3), secondary aerosol, acid deposition, and associated precursors, using common emissions and boundary conditions derived from a global model. Four-month-long periods, representing 2 years and three seasons (i.e., March, July, and December in 2001, and March in 2002), are analyzed. New observational data, obtained under the EANET (the Acid Deposition Monitoring Network in East Asia) monitoring program, were made available for this study, and these data provide a regional database to compare with model simulations. The analysis focused around seven subject areas: O3 and related precursors, aerosols, acid deposition, global inflow of pollutants and precursor to Asia, model sensitivities to aerosol parameterization, analysis of emission fields, and detailed analyses of individual models, each of which is presented in a companion paper in this issue of Atmospheric Environment. This overview discusses the major findings of the study, as well as information on common emissions, meteorological conditions, and observations. [Copyright &y& Elsevier]