Search

Gas injection is a well-known method for enhancing oil recovery (EOR). The utilization of greenhouse gases, such as carbon dioxide (CO2) or flue gas, offers the dual advantage of reducing greenhouse gas emissions while potentially enhancing the sweep efficiency in oil recovery. Nevertheless, one of the notable challenges encountered when using these gases is the precipitation and deposition of asphaltenes, leading to formation damage and a decrease in reservoir permeability, particularly in the case of light oil reservoirs. In this study, CO2 and flue gas were injected into an elongated core sample comprising four individual core plugs under reservoir conditions to displace the light live oil. The recovery factor and asphaltene deposition along the core holder were assessed and compared as two crucial parameters within the gas injection scenario. Our results indicate a significantly higher recovery factor of 86% achieved with CO2 injection compared to 36% with flue gas injection, attributable to differences in their interfacial tension and miscibility. However, the CO2 injection method exhibits more pronounced formation damage. Individual assessment of each core plug reveals that permeability impairment is most acute in the initial two core plugs, situated closer to the injection face of the extended core. These findings enhance our understanding of the mechanisms contributing to permeability impairment resulting from asphaltene deposition during CO2 and flue gas injection for EOR. [ABSTRACT FROM AUTHOR]

Gas injection is a well-known method for enhancing oil recovery (EOR). The utilization of greenhouse gases, such as carbon dioxide (CO2) or flue gas, offers the dual advantage of reducing greenhouse gas emissions while potentially enhancing the sweep efficiency in oil recovery. Nevertheless, one of the notable challenges encountered when using these gases is the precipitation and deposition of asphaltenes, leading to formation damage and a decrease in reservoir permeability, particularly in the case of light oil reservoirs. In this study, CO2 and flue gas were injected into an elongated core sample comprising four individual core plugs under reservoir conditions to displace the light live oil. The recovery factor and asphaltene deposition along the core holder were assessed and compared as two crucial parameters within the gas injection scenario. Our results indicate a significantly higher recovery factor of 86% achieved with CO2 injection compared to 36% with flue gas injection, attributable to differences in their interfacial tension and miscibility. However, the CO2 injection method exhibits more pronounced formation damage. Individual assessment of each core plug reveals that permeability impairment is most acute in the initial two core plugs, situated closer to the injection face of the extended core. These findings enhance our understanding of the mechanisms contributing to permeability impairment resulting from asphaltene deposition during CO2 and flue gas injection for EOR. [ABSTRACT FROM AUTHOR]