Search

Ulcerative colitis (UC) and Crohn’s disease (CD) are diseases affecting the gastrointestinal tract. Treatment depends on the severity of the disease, site of inflammation, and patient’s response. The aim of this study was to develop a zero-order sustained-release tablet containing both the anti-inflammatory drugs mesalazine and budesonide as a new treatment option for ileo-colonic CD and UC. Tablets were attained by wet granulation with hydroxypropyl methylcellulose and direct compression. Our newly developed tablet core was coated with different ColoPulse® coating thicknesses and the mesalazine and budesonide release profiles were investigated in a 600-min gastrointestinal simulation system (GISS) experiment, together with commercially available MMX®-mesalazine and MMX®-budesonide. Lag-time, release rate ( k 0 ), completeness of release, and zero-order correlation coefficient ( R 2 0 ) could be manipulated by varying ColoPulse® coating thickness. Our newly developed combination preparation (C[4.92]) complied with all conducted European Pharmacopoeia tests as well as an accelerated 6-month stability test and had a lag-time of 250 min (simulated ileum targeted), a linear release profile (mesalazine R 2 0 = 0.9002; budesonide R 2 0 = 0.9481), and drug release of 100% mesalazine and 77% budesonide. Like C[4.92], MMX®-mesalazine had a linear ( R 2 0 = 0.9883) and complete release profile (96%). However, C[4.92] lag-time was longer (250 vs. 210 min), assuring simulated ileum specificity. Remarkably, MMX®-budesonide lag-time was 480 min and release was only 7% with a linear character ( R 2 0 = 0.9906). The in vitro results suggest that MMX®-budesonide effectiveness may be improved if budesonide release in the aqueous phase would be increased and that C[4.92] is a potential, new treatment option for ileo-colonic CD and UC. [ABSTRACT FROM AUTHOR]

The tabletting properties of a number of different amorphous inulin types were investigated. The types varied with respect to chain length, particle size and amount of included air in the particles. Powder flow properties and densities of the different types were investigated. Just as expected, it was found that the flow properties improved with increased particle size of the material. Compactibility was investigated by compression of tablets on a compaction simulator, simulating the compression on high-speed tabletting machines. The bonding capacity of all inulins was high. However, the lubricant sensitivity strongly varied among the different types of inulin. Generally, amorphous materials such as starches are highly lubricant sensitive, because they show ductile behaviour upon compaction. On the other hand, crystalline materials such as dicalcium phosphate dihydrate have a low lubricant sensitivity, because they fragment during compaction. A high lubricant sensitivity was indeed found for amorphous inulins with a low amount of entrapped air. In contrast, the lubricant sensitivity of the amorphous inulin was low when particles containing large amounts of air were compressed. Obviously entrapped air induces fragmentation of the powder particles by which the lubricant film, covering the particles, was destroyed. Tablets prepared from inulin did not disintegrate but they dissolved when incubated in water. The disintegration/dissolution time increased with decreasing chain length of the inulin. The addition of a disintegrant reduced the disintegration time. The somewhat slower dissolution of the longer chain inulin can be an advantage for chewable tablets or lozenges. It was concluded that inulin with large amounts of entrapped air is a good filler-binder and an attractive alternative to commonly used filler-binders. [Copyright &y& Elsevier]

The ileocolonic-targeted delivery of vitamins can establish beneficial alterations in gut microbial composition. Here, we describe the development of capsules containing riboflavin, nicotinic acid, and ascorbic acid covered with a pH-sensitive coating (ColoVit) to establish site-specific release in the ileocolon. Ingredient properties (particle size distribution, morphology) relevant for formulation and product quality were determined. Capsule content and the in vitro release behaviour were determined using a HPLC-method. Uncoated and coated validation batches were produced. Release characteristics were evaluated using a gastro-intestinal simulation system. All capsules met the required specifications. The contents of the ingredients were in the 90.0–120.0% range, and uniformity requirements were met. In the dissolution test a lag-time in drug release of 277–283 min was found, which meets requirements for ileocolonic release. The release itself is immediate as shown by dissolution of the vitamins of more than 75% in 1 h. The production process of the ColoVit formulation was validated and reproducible, it was shown that the vitamin blend was stable during the production process and in the finished coated product. The ColoVit is intended as an innovative treatment approach for beneficial microbiome modulation and optimization of gut health. [ABSTRACT FROM AUTHOR]

Abstract: Although other polyols have been described extensively as filler-binders in direct compaction of tablets, the polyol isomalt is rather unknown as pharmaceutical excipient, in spite of its description in all the main pharmacopoeias. In this paper the compaction properties of different types of ispomalt were studied. The types used were the standard product sieved isomalt, milled isomalt and two types of agglomerated isomalt with a different ratio between 6-O-α-d-glucopyranosyl-d-sorbitol (GPS) and 1-O-α-d-glucopyranosyl-d-mannitol dihydrate (GPM). Powder flow properties, specific surface area and densities of the different types were investigated. Compactibility was investigated by compression of the tablets on a compaction simulator, simulating the compression on high-speed tabletting machines. Lubricant sensitivity was measured by compressing unlubricated tablets and tablets lubricated with 1% magnesium stearate on an instrumented hydraulic press. Sieved isomalt had excellent flow properties but the compactibility was found to be poor whereas the lubricant sensitivity was high. Milling resulted in both a strong increase in compactibility as an effect of the higher surface area for bonding and a decrease in lubricant sensitivity as an effect of the higher surface area to be coated with magnesium stearate. However, the flow properties of milled isomalt were too bad for use as filler-binder in direct compaction. Just as could be expected, agglomeration of milled isomalt by fluid bed agglomeration improved flowability. The good compaction properties and the low lubricant sensitivity were maintained. This effect is caused by an early fragmentation of the agglomerated material during the compaction process, producing clean, lubricant-free particles and a high surface for bonding. The different GPS/GPM ratios of the agglomerated isomalt types studied had no significant effect on the compaction properties. [Copyright &y& Elsevier]

In this study the effect of different vessel wall materials on the granule size distributions obtained during high-shear granulation of different materials is investigated. The distributions obtained in glass and stainless steel vessels differ from those obtained in PMMA (polymethyl methacrylate) and PTFE (polytetrafluoroethylene) vessels. The high contact angle of PMMA forces all liquid immediately into the more easily wetted powder bed. In this vessel a fast liquid absorbing powder nucleates in the droplet controlled regime, leading to a narrow particle size distribution. In a vessel with a low contact angle (glass or stainless steel) a liquid layer can be formed on the wall surface. This liquid causes an inhomogeneous distribution of liquid over the powder bed; a broader granule size distribution is the result. With a powder that slowly absorbs liquid, local overwet areas can be created, resulting in large granules. This results in broader granule size distributions as well. In conclusion; the contact angle of the vessel material and the wetting rate of the powder used determine the granule growth process and the resulting granule size distribution. [Copyright &y& Elsevier]

The aim of this study was to investigate the effect of divalent metal ions (Ca, Mg2+, and Zn2+) on the stability of oxytocin in aspartate buffer (pH 4.5) and to determine their interaction with the peptide in aqueous solution. Reversed-phase high-performance liquid chromatography and high-performance size-exclusion chromatography measurements indicated that after 4 weeks of storage at 55°C, all tested divalent metal ions improved the stability of oxytocin in aspartate-buffered solutions (pH 4.5). However, the stabilizing effects of Zn2+ were by far superior compared with Ca2+ and Mg2+. Liquid chromatography-tandem mass spectrometry showed that the combination of aspartate and Zn2+ in particular suppressed the formation of peptide dimers. As shown by isothermal titration calorimetry, Zn2+ interacted with oxytocin in the presence of aspartate buffer, whereas Ca2+ or Mg2+ did not. In conclusion, the stability of oxytocin in the aspartate-buffered solution is strongly improved in the presence of Zn2+, and the stabilization effect is correlated with the ability of the divalent metal ions in aspartate buffer to interact with oxytocin. The reported results are discussed in relation to the possible mode of interactions among the peptide, Zn2+, and buffer components leading to the observed stabilization effects. © 2013 Wiley Periodicals, Inc. and the American Pharmacists Association J Pharm Sci 102:1734-1741, 2013 [ABSTRACT FROM AUTHOR]

Abstract: In the lungs of cystic fibrosis (CF) patients, Pseudomonas aeruginosa commonly causes chronic infections. It has been shown that the P. aeruginosa quorum sensing (QS) system controls the expression of virulence factors during invasion and infection to host cells. PvdQ is an acyl–homoserine lactone (AHL) acylase able to degrade the signal molecule of P. aeruginosa QS. The role of PvdQ in inhibiting the QS and its successive virulence determinants has been established in in vitro as well as in in vivo, the latter in a Caenorabdhitis elegans model. For the treatment of pulmonary P. aeruginosa infections, we propose that PvdQ can be best administered directly to the lungs of the patients as a dry powder because this is expected to give specific advantages in delivery as compared to nebulizing. Therefore in this study we investigated the production of a PvdQ powder by spray-freeze drying using mannitol, trehalose and inulin as excipient. The activity of PvdQ in the powder was determined immediately after production and after subsequent storage during 4weeks at 20°C and 55°C. We found that the enzymatic activity of PvdQ is fully maintained during spray-freeze drying using mannitol, trehalose or inulin as excipient. However, mannitol was not able to stabilize the protein during storage, while PvdQ incorporated in trehalose or inulin was fully stabilized even during storage at 55°C for at least 4weeks. The poor stabilizing capacities of mannitol during storage could be related to its crystalline nature while the excellent stabilizing capacities of trehalose and inulin during storage could be related to their amorphous nature. The trehalose and inulin-based particles consisted of porous spheres with a volume average aerodynamical diameter of ∼1.8μm implying that they are suitable for pulmonary delivery. This is the first study in which an AHL-degrading enzyme is processed into spray-freeze-dried powder suitable for inhalation. [Copyright &y& Elsevier]

Abstract: In a previous study we have developed a novel process to produce drug nanocrystals. This process, “controlled crystallization during freeze-drying” has shown to be a successful method to increase the dissolution rate of poorly water-soluble drugs [de Waard, H., Hinrichs, W.L.J., Frijlink, H.W., 2008. A novel bottom-up process to produce drug nanocrystals: controlled crystallization during freeze drying. J. Control. Release 128, 179–183]. This process consisted of two steps: a solution of a matrix material (mannitol) in water was mixed with a solution of a drug (fenofibrate) in tertiary butyl alcohol (TBA). This mixture was frozen and subsequently freeze-dried at relatively high temperature (−25°C). Since the solution of matrix and drug in the water–TBA mixture is thermodynamically unstable, it had to be frozen immediately and fast after preparation to prevent premature crystallization of the drug resulting in the formation too large drug crystals. Therefore, small quantities were manually mixed in a vial and this vial was immersed in liquid nitrogen. To make this process ready for large scale production, the modification of this batch process to a semi-continuous process by the application of a 3-way nozzle was studied. With this nozzle, the aqueous and TBA-solutions were pumped into the nozzle via two separate channels and mixed just at the moment they left the nozzle. Thorough mixing was facilitated by the atomizing air, supplied via the third channel. Since the mixture was sprayed immediately into liquid nitrogen, premature crystallization was prevented. A further advantage was that the atomizing air generated small droplets which were directly immersed into liquid nitrogen. Consequently, the mixture was frozen even faster than in the batch process. This resulted in a reduced size of the drug crystals and hence a higher dissolution rate. Therefore, using the semi-continuous process does not only result in successfully making this process suitable for large scale production of the controlled crystallized dispersions, but it also results in a better product. [Copyright &y& Elsevier]

Swallowing problems and the required dose adaptations needed to obtain optimal pharmacotherapy may be a hurdle in the use of tablets in daily clinical practice. Tablet splitting, crushing, or grinding is often applied to personalise medication, especially for the elderly and children. In this study, the performance of different types of (commercially available) devices was studied. Included were splitters, screwcap crushers, manual grinders, and electric grinders. Unscored tablets without active ingredient were prepared, with a diameter of 9 and 13 mm and a hardness of 100–220 N. Tablets were split into two parts and the difference in weight was measured. The time needed to pulverise the tablets (crush time) was recorded. The residue remaining in the device (loss) was measured. The powder was sieved to obtain a particle fraction >600 µm and <600 µm. The median particle size and particle size distribution of the later fraction were determined using laser diffraction analysis. Splitting tablets into two equal parts appeared to be difficult with the devices tested. Most screwcap grinders yielded a coarse powder containing larger chunks. Manual and especially electric grinders produced a finer powder, making it suitable for administration via an enteral feeding tube as well as for use in individualised preparations such as capsules. In conclusion, for domestic and incidental use, a screwcap crusher may provide sufficient size reduction, while for the more demanding regular use in hospitals and nursing residences, a manual or electric grinder is preferred. [ABSTRACT FROM AUTHOR]

Lactoferrin (Lf) is a potential drug candidate for the treatment of oropharyngeal Candida infections. However, for an effective therapeutic treatment an appropriate dosage form is required. Therefore a mucoadhesive tablet for buccal application was developed. Tablets of sufficient strength could be produced on high speed tabletting machines, but they could only be obtained when the protein contained at least 7% moisture. The tablet contained sodium alginate both for its release-controlling properties as well as for its mucoadhesive properties. Furthermore, phosphate buffer was added to keep the pH of the saliva in the mouth within the range of 6.5 to 7.5. In this pH range, Lf has shown to have its highest activity against Candida growth inhibition. The tablet formulation containing Lf had the same antifungal properties as compared with Lf alone, because in most cases identical inhibitory concentrations were observed against several clinical isolates of Candida albicans and Candida glabrata. In human volunteers the tablets, containing 250 mg Lf and placed in each pouch, were able to keep the Lf concentration in the saliva at effective levels for at least 2 hr, while the pH of the saliva remained within the desired range. We concluded that the developed mucoadhesive tablet can improve the therapeutic efficacy of Lf and that it is suitable for further clinical research. [ABSTRACT FROM AUTHOR]

An abstract of the article "Marked Endotheliotropism of Highly Pathogenic Avian Influenza Virus H5N1 following Intestinal Inoculation in Cats," by Leslie A. Reperant and colleagues is presented.