Search

Effective and selective removal of 99TcO4 -from aqueous solution is highly desirable for both waste partitioning and contamination remediation purposes in the modern nuclear fuel cycle, but is of significant challenge. We report here a hydrolytically stable and radiation-resistant cationic metal-organic framework (MOF), SCU-101, exhibiting extremely fast removal kinetics, exceptional distribution coefficient and high sorption capacity toward TcO4 -More importantly, this material can selectively remove TcO4 -in the presence of large excesses of NO3 and SO4 2-, as even 6000 times of SO4 2-in excess does not significantly affect the sorption of TcO4 -These superior features endow that SCU-101 is capable of effectively separating TcO4 - from Hanford lowlevel waste melter off-gas scrubber simulant stream. The sorption mechanism is directly unraveled by the single crystal structure of TcO4 -incorporated SCU-101, as the first reported crystal structure to display TcO4 - trapped in a sorbent material. A recognition site for the accommodation of TcO4 -is visualized and is consistent with the DFT analysis results, while no such site can be resolved for other anions. [ABSTRACT FROM AUTHOR]

99Tc is one of the most problematic radioisotopes in used nuclear fuel owing to its combined features of high fission yield, long half-life, and high environmental mobility. There are only a handful of functional materials that can remove TcO4- anion from aqueous solution and identifying for new, stable materials with high anion-exchange capacities, fast kinetics, and good selectivity remains a challenge. We report here an 8-fold interpenetrated three-dimensional cationic metal-organic framework material, SCU-100, which is assembled from a tetradentate neutral nitrogen-donor ligand and two-coordinate Ag+ cations as potential open metal sites. The structure also contains a series of 1D channels filled with unbound nitrate anions. SCU-100 maintains its crystallinity in aqueous solution over a wide pH range from 1 to 13 and exhibits excellent β and ? radiation-resistance. Initial anion exchange studies show that SCU-100 is able to both quantitatively and rapidly remove TcO4- from water within 30 min. The exchange capacity for the surrogate ReO4- reaches up to 541 mg/g and the distribution coefficient Kd is up to 1.9 x 105 mL/g, which are significantly higher than all previously tested inorganic anion sorbent materials. More importantly, SCU-100 can selectively capture TcO4- in the presence of large excess of competitive anions (NO3-, SO42-, CO32-, and PO43-) and remove as much as 87% of TcO4- from the Hanford low-level waste melter off-gas scrubber simulant stream within 2 h. The sorption mechanism is well elucidated by single crystal X-ray diffraction, showing that the sorbed ReO4- anion is able to selectively coordinate to the open Ag+ sites forming Ag-O-Re bonds and a series of hydrogen bonds. This further leads to a single- crystal-to-single-crystal transformation from an 8-fold interpenetrated framework with disordered nitrate anions to a 4-fold interpenetrated framework with fully ordered ReO4- anions. This work represents a practical case of TcO4- removal by a MOF material and demonstrates the promise of using this type of material as a scavenger for treating anionic radioactive contaminants during the nuclear waste partitioning and remediation processes. [ABSTRACT FROM AUTHOR]

Selenium is of great concern owing to its acutely toxic characteristic at elevated dosage and the long-term radiotoxicity of 79Se. The contents of selenium in industrial wastewater, agricultural runoff, and drinking water have to be constrained to a value of 50 µg/L as the maximum concentration limit. We reported here the selenium uptake using a structurally well-defined cationic layered rare earth hydroxide, Y2(OH)5Cl 1.5H2O. The sorption kinetics, isotherms, selectivity, and desorption of selenite and selenate on Y2(OH)5Cl 1.5H2O at pH 7 and 8.5 were systematically investigated using a batch method. The maximum sorption capacities of selenite and selenate are 207 and 124 mg/g, respectively, both representing the new records among those of inorganic sorbents. In the low concentration region, Y2(OH)5Cl 1.5H2O is able to almost completely remove selenium from aqueous solution even in the presence of competitive anions such as NO3-, Cl-, CO32-, SO42-, and HPO42-. The resulting concentration of selenium is below 10 µg/L, well meeting the strictest criterion for the drinking water. The selenate on loaded samples could be desorbed by rinsing with concentrated noncomplexing NaCl solutions whereas complexing ligands have to be employed to elute selenite for the material regeneration. After desorption, Y2(OH)5Cl 1.5H2O could be reused to remove selenate and selenite. In addition, the sorption mechanism was unraveled by the combination of EDS, FT-IR, Raman, PXRD, and EXAFS techniques. Specifically, the selenate ions were exchanged with chloride ions in the interlayer space, forming outer-sphere complexes. In comparison, besides anion exchange mechanism, the selenite ions were directly bound to the Y3+ center in the positively charged layer of [Y2(OH)5(H2O)]+ through strong bidentate binuclear inner-sphere complexation, consistent with the observation of the higher uptake of selenite over selenate. The results presented in this work confirm that the cationic layered rare earth hydroxide is an emerging and promising material for efficient removal of selenite and selenate as well as other anionic environmental pollutants. [ABSTRACT FROM AUTHOR]

Searching for new host materials tailored for the high proton conductivity is highly desirable for the new generation of fuel cell system. We report here an anion-exchangeable cationic metal organic framework with the formula of [Ce(Ccbp)2]Br0.25Cl0.75.6H2O.2DMF (compound 1), which is constructed through the self-assembly of zwitterionic-based ligands H2CcbpBr (H2CcbpBr = 4-carboxy-1-(4-carboxybenzyl)pyridinium bromide) and (NH4)2Ce(NO3)6. During the investigation of humidity-dependent proton conduction behavior, we observed a rare case of rapid water-induced single-crystal-to-single-crystal phase transformation from compound 1 to a neutral chain [Ce(Ccbp)3(H2O)3].8H2O (compound 2). This structural transformation originates from the coordination of water to Ce(III) metal centers, distortion of ligands, and the soft nature of the cationic framework 1, as probed and confirmed by a variety of investigations including color change, water vapor adsorption measurement, powder X-ray diffraction, single-crystal X-ray diffraction, humidity-dependent proton-conducting measurements, IR and UV-vis spectroscopies, and thermogravimetric analysis. As a consequence, this process introduces significant amounts of both coordinated and lattice water molecules into the structure, further giving rise to a decent water-assisted proton conductivity of 1.104 × 10-4 S cm-1 at 368 K and 95% relative humidity. [ABSTRACT FROM AUTHOR]

The preparation of proton-conducting materials that are functional and stable at intermediate temperatures (393–573 K) is a focal point of fuel cell development. The purely inorganic material, HNd(IO3)4, which possesses a dense 3D framework structure, can reach a maximum of 4.6 × 10–4 S·cm–1 at 353 K and 95% relative humidity and exhibit a high conductivity of 8.0 × 10–5 S·cm–1 from 373 to 553 K under the flow of wet N2. HNd(IO3)4 exhibits a variety of improvements including high thermal stability, low solubility in water, and resistance to reducing atmosphere. The proton conductivity in such a wide temperature range originates from the intrinsic liberated protons in the structure and the resulting 1D hydrogen-bonding network confirmed by bond valence sum calculation and solid-state NMR analysis. Moreover, two different activation energies are observed in different temperature regions (0.23 eV below 373 K and 0.026 eV from 373 to 553 K), indicating that two types of proton motion are responsible for proton diffusion, as further domenstrated by temperature-dependent open-circuit voltage hysteresis in a tested fuel cell assembly as well as variable-temperature and double quantum filtered solid-state NMR measurements. [ABSTRACT FROM AUTHOR]

Two new uranyl vanadates have been prepared from hydrothermal reactions and structurally characterized by single-crystal X-ray diffraction. The structure of (H3O)UO2VO4 (UVO-1) consists of anionic layers containing UO22+ pentagonal bipyramids coordinated by edge-sharing VO5 square pyramids, with the charge balanced by interlaminar H3O+ cations. Vanadium in (UO2)3(VO4)2(H2O)3 (UVO-2) exists as monomeric VO4 tetrahedra coordinating to UO22+ pentagonal bipyramids, forming a 3D uranyl(VI) vanadate framework. Similar reactions with the addition of Ln(NO3)3 (Ln = Nd, Eu) afford the three heterobimetallic lanthanide uranyl vanadate frameworks Nd(UO2)3(VO4)3(H2O)11 (NdUVO-1), Eu(UO2)3(VO4)3(H2O)10 (EuUVO-1), and Eu2(UO2)12(VO4)10(H2O)24 (EuUVO-2). In NdUVO-1 and EuUVO-1, Ln3+ cations are inserted into the interlayer space of UVO-1 substituting for H3O+ and further bridging adjacent layers into 3D frameworks. Similarly, EuUVO-2 adopts the same sheet topology as UVO-2, with Eu3+ ions replacing some of the interlayer uranyl ions in UVO-2. Our work has demonstrated that uranyl vanadate extended structures are excellent hosts for further incorporation of trivalent lanthanide/actinide cations and has provided a new way to create new heterobimetallic 4f-5f and 5f-5f compounds. [ABSTRACT FROM AUTHOR]

Searching for new chemically durable and radiation-resistant absorbent materials for actinides and their fission products generated in the nuclear fuel cycle remain highly desirable, for both waste management and contamination remediation. Here we present a rare case of 3D uranyl organic framework material built through polycatenating of three sets of graphene-like layers, which exhibits significant umbellate distortions in the uranyl equatorial planes studied thoroughly by linear transit calculations. This unique structural arrangement leads to high β and γ radiation-resistance and chemical stability in aqueous solutions within a wide pH range from 3 to 12. Being equipped with the highest surface area among all actinide compounds known to date and completely exchangeable [(CH3)2NH2]+ cations in the structure, this material is able to selectively remove cesium from aqueous solutions while retaining the polycatenated framework structure. [ABSTRACT FROM AUTHOR]

Systematic control of the reactions between U(VI) and 1,4-phenylenebis(methylene))bis(phosphonic acid) (pmbH4) allows for alterations in the bonding between these constituents and affords three uranyl phosphonate compounds with chiral one-dimensional (1D), two-dimensional (2D), and three-dimensional (3D) structures, namely, [TPA][UO2(pmbH3)(pmbH2)H2O]̣2H2O (1), [NH4]2[UO2(pmb)] (2), UO2(pmbH2) (3), and the first uranyl mixed phosphite/phosphonate compound [TMA]2[(UO2)2(pmb)(HPO3)] (4) (TPA = NPr4+, TMA = NMe4+). These compounds crystallize in the space groups P212121, P1, P21/c, and Cmcm, respectively. Further investigation of the local uranyl coordination environment reveals that in 1 only oxygen atoms from P═O moieties ligate the uranium centers; whereas in 2 only P--O- oxygen atoms are involved in bonding and yield a layered topology. Compound 3 differs sharply from the first two in that conjugated P═O and P--O- oxygen atoms chelate the uranium centers resulting in a 3D framework. In compound 4, a phosphonate group bridges three uranyl centers further coordinated with a phosphite ligand HPO32-, which is a product of pmbH4 decomposing, forming a 2D layered structure. Compounds 3 and 4 also contain a different coordination environment for U(VI) than that found in 1 or 2. In this case, tetragonal bipyramidal UO6 units occur instead of the far more common UO7 pentagonal bipyramids found in 1 and 2. Interestingly, 1 converts to 3 at elevated reaction temperatures, indicating that the formation of 1 is likely under kinetic control. This is supported by thermal analysis, which reveals that 3 has higher thermal stability than 1 or 2. UV--vis--near-IR absorption and fluorescence spectroscopy show that the absorption and photoluminescence intensity increases from 1 to 4. Density functional theory electronic structure calculations provide insight into the nature of the interactions between U(VI) and the phosphonate ligands. [ABSTRACT FROM AUTHOR]

The first thorium framework compound with mixed-valent phosphorus-based (phosphite and pyrophosphate) ligands, [BMMim]2[Th3(PO3)4(H2P2O7)3] (ThP-1), was synthesized by ionothermal reactions concurrent with the partial oxidation of phosphoric acid. The overall structural topology of ThP-1 highly resembles that of MOF-5, containing only one type of three-dimensional channels with a window size of 11.32 Å 11.32 Å. ThP-1 has a free void volume of 50.8%, making it one of the most porous purely inorganic actinide-based framework materials. More importantly, ThP-1 is highly stable in aqueous solutions over an extremely wide pH range from 1 to 14 and thus may find potential applications in selective ion exchange and catalysis. [ABSTRACT FROM AUTHOR]