Search

Sida rhombifolia (S. rhombifolia) is a widely used herbal plant for humans because of its antioxidant and antibacterial effects, but its potential use as a feed additive for livestock has not been investigated. Twenty 350 days‐old Anyi tile‐like grey chickens were randomly divided into a control group (fed basal diet) and a treatment group (fed basal diet + 3% of S. rhombifolia), and these chickens were feed for 31 days. Dietary S. rhombifolia remarkably enhanced plasma antioxidants, including the significantly increased total antioxidant capability (p < 0.01), catalase (p = 0.04), and superoxide dismutase (p < 0.01) in the treatment group. Furthermore, dietary S. rhombifolia also modulated chicken cecal microbiota, including an increased microbial diversity (Shannon, p = 0.03; Chao1, p = 0.03) in the treatment group. Regarding taxonomic analysis, 34 microbial taxa showed significant differences between the two groups. Meanwhile, the dominant phylum Actinobacteriota (p = 0.04), and dominant genera Desulfovibrio (p = 0.04) and Olsenella (p = 0.02) were significantly increased after treatment, whereas the pathogenic genus Escherichia‐Shigella (p = 0.04) was significantly decreased after feeding S. rhombifolia. The results indicating that S. rhombifolia has potential for use as a natural plant feed additive for chickens. [ABSTRACT FROM AUTHOR]

Effectively detecting the quality of blueberries is crucial for ensuring that high-quality products are supplied to the fresh market. This study developed a nondestructive method for determining the soluble solids content (SSC) of blueberry fruit by using a near-infrared hyperspectral imaging technique. The reflection hyperspectral images in the 900–1700 nm waveband range were collected from 480 fresh blueberry samples. An image analysis pipeline was developed to extract the spectrums of blueberries from the hyperspectral images. A regression model for quantifying SSC values was successfully established based on the full range of wavebands, achieving the highest R P 2 of 0.8655 and the lowest RMSEP value of 0.4431 °Brix. Furthermore, three variable selection methods, namely the Successive Projections Algorithm (SPA), interval PLS (iPLS), and Genetic Algorithm (GA), were utilized to identify the feature wavebands for modeling. The models calibrated from feature wavebands generated an RMSEP of 0.4643 °Brix, 0.4791 °Brix, and 0.4764 °Brix, as well as the R P 2 of 0.8507, 0.8397, and 0.8420 for SPA, iPLS, and GA, respectively. Furthermore, a pseudo-color distribution diagram of the SSC values within blueberries was successfully generated based on established models. This study demonstrated a novel approach for blueberry quality detection and inspection by jointly using hyperspectral imaging and machine learning methodologies. It can serve as a valuable reference for the development of grading equipment systems and portable testing devices for fruit quality assurance. [ABSTRACT FROM AUTHOR]

Response latency is a critical parameter in studying human behavior, representing the time interval between the onset of stimulus and the response. However, different time between devices can introduce errors. Serial port synchronization signal can mitigate this, but limited information is available regarding their accuracy. Optical signals offer another option, but the difference in the positioning of optical signals and visual stimuli can introduce errors, and there have been limited reports of error reduction. This study aims to investigate methods for reducing the time errors. We used the Psychtoolbox to generate visual stimuli and serial port synchronization signals to explore their accuracy. Subsequently, we proposed a calibration formula to minimize the error between optical signals and visual stimuli. The findings are as follows: Firstly, the serial port synchronization signal presenting precedes visual stimulation, with a smaller lead time observed at higher refresh rates. Secondly, the lead time increases as the stimulus position deviates to the right and downwards. In Linux and IOPort(), serial port synchronization signals exhibited greater accuracy. Considering the poor accuracy and the multiple influencing factors associated with serial port synchronization signals, it is recommended to use optical signals to complete time synchronization. The results indicate that under the darkening process, the time error is – 0.23 ~ 0.08 ms (mean). This calibration formula can help measure the response latency accurately. This study provides valuable insights for optimizing experimental design and improving the accuracy of response latency. Although it only involves visual stimuli, the methods and results of this study can still serve as a reference. [ABSTRACT FROM AUTHOR]

To pursuit advancing electrochromic technology, the preparation of a novel hierarchical‐porous NiOx‐decorated ITO transparent conductive electrode was developed through the vapor‐assisted conversion and subsequent calcination processes. The modified transparent electrode exhibited advantages in the electrodeposition of conductive polymer films, which significantly enhanced electrochromic cycling stability. Moreover, the complementary electrochromic device based on NiOx‐decorated ITO transparent electrode was fabricated, demonstrating rapid response time (1.75 s for coloration and 0.87 s for bleaching), high optical contrast (53.4 %), and remarkable cycling stability (90 % optical contrast retention over 2000 cycles). This finding holds prominent potential for applications in related fields. [ABSTRACT FROM AUTHOR]

Background: Kenny-Caffey Syndrome type 2 (KCS2) is a genetic disease affecting bone metabolism. However, cochlear implantation (CI) results have yet to be published in detail. Objective: This study presents the gene, clinical characteristics, surgical outcomes, and literature review of 2 patients with sensorineural hearing loss related to KCS2. To enhance diagnostic detection and accuracy, we also compare the differential diagnosis between KCS2, otosclerosis, and Cogan's syndrome (CS). Methods: Prior to CI, patients with KCS2 and CS underwent comprehensive audiological and radiological evaluations. Postoperative auditory speech outcomes and impedance values were recorded and analyzed statistically. A systematic search of the literature was conducted to summarize clinical characteristics. Results: Patients diagnosed with KCS2 exhibit more pronounced changes in the inner ear. The impedance values in the KCS2 cohort were considerably higher (Mean = 12.13 kΩ) than those with CS (Mean = 8.8 kΩ) one year post-activation. The literature review exhibits the clinical manifestations associated with KCS2. Conclusion: CI is an effective treatment for KCS2 to restore hearing loss. More frequent programming and accurate adjustment of stimulation is of great necessity. A thorough examination, including temporal bone HRCT, 3D-MRI, audiological evaluations, and whole-exome sequencing, is essential for the diagnosis and treatment of KCS2. [ABSTRACT FROM AUTHOR]

Background: This study aimed to compare postoperative complications in patients with esophagogastric variceal bleeding (EVB) who underwent laparoscopic splenectomy combined with pericardial devascularization (LSPD) versus transjugular intrahepatic portosystemic shunt (TIPS) procedures. Methods: A retrospective collection of medical records was conducted from January 2014 to May 2020 at Union Hospital, Tongji Medical College, Huazhong University of Science and Technology. The study included patients from the departments of trauma surgery, interventional radiology, and general surgery who were diagnosed with EVB caused by portal hypertension and treated with LSPD or TIPS. Follow-up data were obtained to assess the occurrence of postoperative complications in both groups. Results: A total of 201 patients were included in the study, with 104 cases in the LSPD group and 97 cases in the TIPS group. There was no significant difference in the 1-year and 3-year post-surgery survival rates between the TIPS and LSPD groups (P = 0.669, 0.066). The 3-year survival rate of Child–Pugh B patients in the LSPD group was higher than TIPS group (P = 0.041). The LSPD group also had a significantly higher rate of freedom from rebleeding at 3-year post-surgery compared to the TIPS group (P = 0.038). Stratified analysis showed no statistically significant difference in the rebleeding rate between the two groups. Furthermore, the LSPD group had a higher rate of freedom from overt hepatic encephalopathy at 1-year and 3-year post-surgery compared to the TIPS group (P = 0.007, < 0.001). The LSPD group also had a lower rate of severe complications at 3-year post-surgery compared to the TIPS group (P = 0.020). Conclusion: Compared to TIPS, LSPD does not increase the risk of mortality and rebleeding, while demonstrating fewer complications. In patients classified as Child–Pugh A and B, the use of LSPD for treating EVB is both safe and effective. [ABSTRACT FROM AUTHOR]

Purpose: The metallic alloys and their components fabricated via laser powder bed fusion (LPBF) suffer from the microvoids formed inevitably due to the extreme solidification rate during fabrication, which are impossible to be removed by heat treatment. This paper aims to remove those microvoids in as-built AlSi10Mg alloys by hot forging and enhance their mechanical properties. Design/methodology/approach: AlSi10Mg samples were built using prealloyed powder with a set of optimized LPBF parameters, viz. 350 W of laser power, 1,170 mm/s of scan speed, 50 µm of layer thickness and 0.24 mm of hatch spacing. As-built samples were preheated to 430°C followed by immediate pressing with two different thickness reductions of 10% and 35%. The effect of hot forging on the microstructure was analyzed by means of X-ray diffraction, scanning electron microscopy, electron backscattered diffraction and transmission electron microscopy. Tensile tests were performed to reveal the effect of hot forging on the mechanical properties. Findings: By using hot forging, the large number of microvoids in both as-built and post heat-treated samples were mostly healed. Moreover, the Si particles were finer in forged condition (∼150 nm) compared with those in heat-treated condition (∼300 nm). Tensile tests showed that compared with heat treatment, the hot forging process could noticeably increase tensile strength at no expense of ductility. Consequently, the toughness (integration of tensile stress and strain) of forged alloy increased by ∼86% and ∼24% compared with as-built and heat-treated alloys, respectively. Originality/value: Hot forging can effectively remove the inevitable microvoids in metals fabricated via LPBF, which is beneficial to the mechanical properties. These findings are inspiring for the evolution of the LPBF technique to eliminate the microvoids and boost the mechanical properties of metals fabricated via LPBF. [ABSTRACT FROM AUTHOR]

The efficacious forecasting of single‐station atmospheric temperature profiles can provide essential support for the structural design and flight missions of spacecrafts in near space. However, empirical models and reference atmospheric models most are calculations of the average state of the atmosphere profiles. Numerical assimilation models require expensive computational costs to improve the accuracy for medium and long‐term forecasting. It has been still a challenge to refined predict short‐term temperature profiles of near space at a low‐cost. We present a temperature profile operator method for refined modeling in the stratosphere by fusing the ability of Long Short‐Term Memory (LSTM) networks or its variants‐ bidirectional LSTM (BiLSTM) to exploit time series correlated information and deep operator networks (DeepONets) to approximate the solution operator of temperature profiles. It consists of three subnetworks. The first subnetwork is used to approximate the discrete temperature profile function, the second net is applied to represent the spatial information of pressure heights, and the third branch is utilized to encode the time domain of the temperature profile operator. We first use the hourly low latitude temperature data (20–50 km) from ERA5 for training, verification and iterative testing in the next 48 hr. The results denote that the temperature profile operator network has a stable and low error of cumulative generalization, and the BiLSTM operator significantly outperform the other models. We also apply two scenarios to testing the refined applicability of the high latitude temperature profile operator and the mid latitude wind profile operator in the stratosphere. This work provides a novel perspective for us to study the refined single‐station modeling of the upper and middle atmosphere. Plain Language Summary: The temporal and spatial distribution mechanism of physical parameters in near space is very complex. It is of great significance to carry out fine modeling and forecasting of atmospheric temperature profiles for spacecrafts in near space. In this study, taking a single‐station temperature profile in the stratosphere as the object, the mathematical mapping problem of temperature operator is realized by a new deep learning method (deep operator networks). This provides a new research perspective for fine spatiotemporal modeling of temperature profiles. The proposed temperature operator shows low cumulative error performance in forecasting low latitude temperature profiles, and is also suitable for high latitude temperature profiles and mid latitude wind profiles in the stratosphere. Key Points: A deep neural operator method is utilized to forecast hourly atmospheric temperature profiles in the stratosphereThe temperature profile operator network based on BiLSTM denotes lower cumulative error in multi‐step iterative forecastingThe proposed method exhibits potential performance in different locations and atmospheric variables [ABSTRACT FROM AUTHOR]

In this work, we present a miniaturized wideband rasorber with good angular stability using via-based metal–graphene structure. The rasorber consists of a compact lossy layer, a frequency-selective surface layer, and an air spacer in the middle. The metal–graphene structure in the lossy layer achieves a tiny period due to multiple metal vias connected with meander lines and open stubs. The graphene resistive films printed on the surface by screen-printing technology realize omnidirectional planar resistors for broadband absorption. The 1-dB transmission band of the rasorber is from 7.27 to 8.01 GHz and the 10-dB reflection band is from 2.54 to 8.58 GHz. Due to its miniaturized unit cell, both the transmission and absorption performance is stable with a large-angle incident wave. The ultra-miniaturized rasorber is fabricated and measured, which demonstrates a wide bandwidth of 108.6% and a small period of 0.05 λ L with great angular stability, making it a good candidate for bi-station stealth radome applications. [ABSTRACT FROM AUTHOR]

In this paper, numerical simulations were conducted to investigate the detection of blockages and leaks in piping systems, and the method's applicability was confirmed by comparing it with data from previous studies. The study explores the effects of using pressure waves generated by different valve closing times, closing methods, and openings to detect blockage and leakage locations. The results demonstrate that extending the valve closing time reduces the maximum pressure in the piping system, but it also makes it harder to identify information about blockages and leaks, thus hindering their location. However, a two-stage valve closure can effectively suppress the amplitude of pressure in the pipeline. The wavelet transform method is capable of accurately detecting the location of sudden pressure changes caused by blockages and leaks in the pipeline using various valve regulation methods. Furthermore, when the valve is partially closed, the pressure wave generated will be reflected as it propagates toward the blockage and leakage location, resulting in a significant sudden pressure change at the valve. Finally, this paper confirms the feasibility of using pressure waves generated by partially closed valves and the combined adjustment of two valves to locate blockage and leakage in the piping system. [ABSTRACT FROM AUTHOR]

Autophagy-related protein 7 (ATG7) is an essential autophagy effector enzyme. Although it is well known that autophagy plays crucial roles in the infections with various viruses including influenza A virus (IAV), function and underlying mechanism of ATG7 in infection and pathogenesis of IAV remain poorly understood. Here, in vitro studies showed that ATG7 had profound effects on replication of IAV. Depletion of ATG7 markedly attenuated the replication of IAV, whereas overexpression of ATG7 facilitated the viral replication. ATG7 conditional knockout mice were further employed and exhibited significantly resistant to viral infections, as evidenced by a lower degree of tissue injury, slower body weight loss, and better survival, than the wild type animals challenged with either IAV (RNA virus) or pseudorabies virus (DNA virus). Interestingly, we found that ATG7 promoted the replication of IAV in autophagy-dependent and -independent manners, as inhibition of autophagy failed to completely block the upregulation of IAV replication by ATG7. To determine the autophagy-independent mechanism, transcriptome analysis was utilized and demonstrated that ATG7 restrained the production of interferons (IFNs). Loss of ATG7 obviously enhanced the expression of type I and III IFNs in ATG7-depleted cells and mice, whereas overexpression of ATG7 impaired the interferon response to IAV infection. Consistently, our experiments demonstrated that ATG7 significantly suppressed IRF3 activation during the IAV infection. Furthermore, we identified long noncoding RNA (lncRNA) GAPLINC as a critical regulator involved in the promotion of IAV replication by ATG7. Importantly, both inactivation of IRF3 and inhibition of IFN response caused by ATG7 were mediated through control over GAPLINC expression, suggesting that GAPLINC contributes to the suppression of antiviral immunity by ATG7. Together, these results uncover an autophagy-independent mechanism by which ATG7 suppresses host innate immunity and establish a critical role for ATG7/GAPLINC/IRF3 axis in regulating IAV infection and pathogenesis. Author summary: Influenza A virus (IAV) causes acute respiratory diseases in human and animals, posing a great threat to public health. Autophagy plays crucial roles in viral infections including IAV, but mechanisms underlying interaction between autophagy and IAV remain ambiguous. Particularly, function and underlying mechanisms of ATG7, an essential autophagy effector enzyme, in viral infections are largely unexplored, and little information is available about relationship between ATG7 and IAV pathogenesis. Here, we used in vitro and in vivo models to address ATG7 function in the IAV infection and pathogenesis. We found that forced expression of ATG7 facilitates the viral replication, while depletion of ATG7 attenuates viral replication and renders mice more resistant to IAV or pseudorabies virus (PRV) infection. Importantly, we identify that ATG7 suppresses IRF3 activation and interferon production via lncRNA GAPLINC, revealing an autophagy-independent mechanism whereby ATG7 restrains host innate immunity and unveiling a critical role of ATG7/GAPLINC/IRF3 axis in regulating IAV pathogenesis. Moreover, our observations suggest that ATG7 may positively regulate the expression of GAPLINC via suppression of NF-κB activation during IAV infection. Together, these results reveal that ATG7 has multiple biological roles beyond autophagy, and provide an important insight into the complicated interplay between host and IAV. [ABSTRACT FROM AUTHOR]

Fine modeling and fast prediction of regional wind field in the middle and upper atmosphere has always been a difficult problem. We designed a neural operator method to solve this problem. We combine the idea of data assimilation with deep learning method to design a regional wind field operator suitable for near space. The annual Root mean square error of the zonal wind and meridional wind of the operator model at the height of 30 km are 0.903 and 0.881, respectively, which is three times that of ConvLSTM. Moreover, we validate the sparse spatio‐temporal modeling method of regional wind field operator at 20/30/40/50 km altitude. The result shows that the model is mesh‐free, and can get high‐precision modeling of different spatio‐temporal resolutions, multiple regions and arbitrary positions at one time, which lays an foundation for fine regional modeling and rapid utilization of near space. Plain Language Summary: The complex variation mechanism of regional wind fields in near space leads to the difficulty of high‐precision modeling and fast prediction, which seriously affects the design and flight of near space vehicles. In this study, a regional wind field neural operator method has been proposed, which can achieve the fine modeling of the regional wind field in the middle and upper atmosphere. The new method is highly flexible, and can get high‐precision modeling and rapid prediction in different spatial‐temporal resolutions, multiple regions and arbitrary positions. Key Points: The neural operator is first used to study high‐precision spatio‐temporal modeling and rapid prediction of regional wind fields in near spaceThe Root mean square error accuracy of regional wind field operator model is three times that of ConvLSTMThe novel method is suitable for sparse spatio‐temporal modeling at any location with different data resolutions [ABSTRACT FROM AUTHOR]

To support the global goal of carbon neutrality, numerous efforts have been devoted to the advancement of electrochemical energy conversion (EEC) and electrochemical energy storage (EES) technologies. For these technologies, transition metal dichalcogenide/carbon (TMDC/C) heterostructures have emerged as promising candidates for both electrode materials and electrocatalysts over the past decade, due to their complementary advantages. It is worth noting that interfacial properties play a crucial role in establishing the overall electrochemical characteristics of TMDC/C heterostructures. However, despite the significant scientific contribution in this area, a systematic understanding of TMDC/C heterostructures' interfacial engineering is currently lacking. This literature review aims to focus on three types of interfacial engineering, namely interfacial orientation engineering, interfacial stacking engineering, and interfacial doping engineering, of TMDC/C heterostructures for their potential applications in EES and EEC devices. To accomplish this goal, a combination of experimental and theoretical approaches was used to allow the analysis and summary of the fundamental electrochemical properties and preparation strategies of TMDC/C heterostructures. Moreover, this review highlights the design and utilization of the interfacial engineering of TMDC/C heterostructures for specific EES and EEC devices. Finally, the challenges and opportunities of using interfacial engineering of TMDC/C heterostructures in practical EES and EEC devices are outlined. We expect that this review will effectively guide readers in their understanding, design, and application of interfacial engineering of TMDC/C heterostructures. [ABSTRACT FROM AUTHOR]

Vision-based Continuous Sign Language Recognition (CSLR) is a challenging and weakly supervised task aimed at segmenting sign language from weakly annotated image stream sequences for recognition. Compared with Isolated Sign Language Recognition (ISLR), the biggest challenge of this work is that the image stream sequences have ambiguous time boundaries. Recent CSLR works have shown that the visual-level sign language recognition task focuses on image stream feature extraction and feature alignment, and overfitting is the most critical problem in the CSLR training process. After investigating the advanced CSLR models in recent years, we have identified that the key to this study is the adequate training of the feature extractor. Therefore, this paper proposes a CSLR model with Multi-state Feature Optimization (MFO), which is based on Fully Convolutional Network (FCN) and Connectionist Temporal Classification (CTC). The MFO mechanism supervises the multiple states of each Sign Gloss in the modeling process and provides more refined labels for training the CTC decoder, which can effectively solve the overfitting problem caused by training, while also significantly reducing the training cost in time. We validate the MFO method on the popular CSLR dataset and demonstrate that the model has better performance. [ABSTRACT FROM AUTHOR]

Plant diseases caused by phytopathogenic fungi are a serious threat in the process of crop production and cause large economic losses to global agriculture. To obtain high-antifungal-activity compounds with novel action mechanisms, a series of 4-substituted mandelic acid derivatives containing a 1,3,4-oxadiazole moiety were designed and synthesized. In vitro bioassay results revealed that some compounds exhibited excellent activity against the tested fungi. Among them, the EC50 values of E13 against Gibberella saubinetii (G. saubinetii), E6 against Verticillium dahlia (V. dahlia), and E18 against Sclerotinia sclerotiorum (S. sclerotiorum) were 20.4, 12.7, and 8.0 mg/L, respectively, which were highly superior to that of the commercialized fungicide mandipropamid. The morphological studies of G. saubinetii with a fluorescence microscope (FM) and scanning electron microscope (SEM) indicated that E13 broke the surface of the hyphae and destroyed cell membrane integrity with increased concentration, thereby inhibiting fungal reproduction. Further cytoplasmic content leakage determination results showed a dramatic increase of the nucleic acid and protein concentrations in mycelia with E13 treatment, which also indicated that the title compound E13 could destroy cell membrane integrity and affect the growth of fungi. These results provide important information for further study of the mechanism of action of mandelic acid derivatives and their structural derivatization. [ABSTRACT FROM AUTHOR]

Objective The outbreak of COVID-19 caused by SARS-CoV-2 has led to a serious worldwide pandemic. Quantitative reverse transcription–polymerase chain reaction (qRT-PCR)–based methods were recommended for routine detection of SARS-CoV-2 RNA. Because the reaction time and analytical sensitivity of qRT-PCR limits the diagnosis of SARS-CoV-2, development of a quick process of SARS-CoV-2 detection technology with high analytical sensitivity remains urgent. Methods We combined isothermal amplification and fluorescence detection technology to develop a new auto-recombinase polymerase amplification (RPA)-fluorescence platform that could be used in the diagnosis of SARS-CoV-2. Results By optimization of primers and probes, the RPA platform could detect SARS-CoV-2 nucleotides within 15 min. The limits of detection and specificity of the auto-RPA-fluorescence platform were 5 copies/µL and 100%, respectively. The accuracy of detection of the auto-RPA-fluorescence platform in the 16 positive samples was 100%. Conclusion The RPA platform is a potential technology for the diagnosis of SARS-CoV-2 infection. [ABSTRACT FROM AUTHOR]

Metamaterial absorbers (MMAs) that absorb electromagnetic waves among an ultra-broad frequency band have attracted great attention in military and civilian applications. In this paper, an ultra-broadband and highly-efficient MMA is presented. The unit cell of the proposed MMA was constructed with two cross-placed stand-up gradient impedance graphene films, which play a key role in improving impedance matching. Considering the trade-off between absorbing performance and processing complexity, in our design, we adopted the stand-up graphene films that have a gradient with three orders of magnitude in total. The simulated results of the proposed absorber show an ultra-broadband absorption (absorptivity > 90%) from 1.8 GHz to 66.7 GHz and a highly-efficient absorption (absorptivity > 97%) in the range of 2–21.7 GHz and 39.6–57 GHz. The field analysis was adopted to explain the mechanism of the proposed absorber. To validate this design, a prototype of 20 × 20 units was processed and assembled. The graphene films were processed with graphene conductive ink using screen print technology. The measured results are in good agreement with the simulated ones. The proposed absorber may find potential applications in the field of stealth technologies and electromagnetic interference. [ABSTRACT FROM AUTHOR]

Hyperuricemia is a metabolic disorder that is essential to the development of inflammatory gout, with increasing prevalence over recent years. Emerging clinical findings has evidenced remarkable tendon damage in individuals with longstanding asymptomatic hyperuricemia, yet the impact of hyperuricemia on tendon homeostasis and associated repercussions is largely unknown. Here, we investigated whether asymptomatic hyperuricemia was associated with spontaneous ruptures in the Achilles tendon and the pathological effect of hyperuricemia on the tendon stem/progenitor cells (TSPCs). Significantly higher serum uric acid (SUA) levels were found in 648 closed Achilles tendon rupture (ATR) patients comparing to those in 12559 healthy volunteers. In vitro study demonstrated that uric acid (UA) dose dependently reduced rat Achilles TSPC viability, decreased the expressions of tendon collagens, and deformed their structural organization while significantly increased the transcript levels of matrix degradative enzymes and proinflammatory factors. Consistently, marked disruptions in Achilles tendon tissue structural and functional integrity were found in a rat model of hyperuricemia, together with enhanced immune cell infiltration. Transcriptome analysis revealed a significant elevation in genes involved in metabolic stress and tissue degeneration in TSPCs challenged by hyperuricemia. Specifically, reduced activity of the AKT-mTOR pathway with enhanced autophagic signaling was confirmed. Our findings indicate that asymptomatic hyperuricemia may be a predisposition of ATR by impeding the normal functions of TSPCs. This information may provide theoretical and experimental basis for exploring the early prevention and care of ATR. [ABSTRACT FROM AUTHOR]

High-strength Al-Cu-Mg alloys are good matrix candidates for fabricating strong and tough Al matrix composites reinforced with carbon nanotubes (CNTs). In this study, an element mechanical alloying method was used to achieve homogeneous CNT dispersion in hard Al-Cu-Mg matrix. A comprehensive transmission electron microscopy study was applied on peak-aged CNTs/Al-Cu-Mg composites and referential Al-Cu-Mg alloy. It was found that the ex-situ CNTs increased the dislocation density and hindered the recrystallization of the Al-Cu-Mg matrix. Thus, larger local stress and strain were detected in CNTs/Al-Cu-Mg composites. The precipitation in CNTs/Al-Cu-Mg composites was accelerated, which brought extra 12 % improvement to tensile yield strength of the composite. The distribution of precipitates in CNTs/Al-Cu-Mg composites were nonuniform due to the element mechanical alloying process, which was probably beneficial to the high ductility of the CNTs/Al-Cu-Mg composite. With the synergetic strengthening effect of CNTs and fine precipitates, CNTs/Al-Cu-Mg composites exhibited well-balanced strength and ductility. [ABSTRACT FROM AUTHOR]

Recent years have witnessed tremendous success of convolutional neural networks in image classification. In the training of image classification, softmax cross-entropy (SCE) loss is widely used because of its clear physical definition and concise gradient calculation. We reformulate SCE loss into a more basic form, in light of which we can understand SCE loss better and rethink the loss functions in image classification. We propose a novel loss function called another metric (AM) loss, which is different from SCE loss in form but is the same in essence. AM loss not only retains the advantages of SCE loss but also provides more gradient information at the later phase of training and has larger inter-classes distances. Extensive experiments on CIFAR-10/100, Tiny ImageNet, and three fine-grained datasets show that AM loss can outperform SCE loss, which also shows the great potential of improving deep neural network training by exploring new loss functions. [ABSTRACT FROM AUTHOR]

In this article, we present a novel design method to achieve optically transparent reflectarrays (RAs) with fine metal line (FML) structure. With this design method, an RA element with a peak return loss of 2.8 dB and a phase variation of 360° is achieved during 12.5–14.5 GHz. Compared with the reported transparent RAs, we first realize wide phase variation, high transparency and low return loss simultaneously. The proposed element is composed of FML pattern, quartz glass substrate, and indium tin oxide (ITO) ground. The FML pattern consists of a metal cross and a folded square ring with a linewidth of 50 $\mu $ m made by a photolithographic process. For verification, three $20 \times 20$ -element RAs with pencil beam and orbital angular momentum (OAM) beam have been arranged, simulated, fabricated, and measured. The measured results agree well with the simulations. The measured optical transmittance of all prototypes is greater than 82% at any position. The proposed FML structure greatly improves the transmittance and has potential for the applications in transparent communication devices. [ABSTRACT FROM AUTHOR]

Background: Gait recognition has been applied in the prediction of the probability of elderly flat ground fall, functional evaluation during rehabilitation, and the training of patients with lower extremity motor dysfunction. Gait distinguishing between seemingly similar kinematic patterns associated with different pathological entities is a challenge for the clinician. How to realize automatic identification and judgment of abnormal gait is a significant challenge in clinical practice. The long-term goal of our study is to develop a gait recognition computer vision system using artificial intelligence (AI) and machine learning (ML) computing. This study aims to find an optimal ML algorithm using computer vision techniques and measure variables from lower limbs to classify gait patterns in healthy people. The purpose of this study is to determine the feasibility of computer vision and machine learning (ML) computing in discriminating different gait patterns associated with flat-ground falls. Methods: We used the Kinect® Motion system to capture the spatiotemporal gait data from seven healthy subjects in three walking trials, including normal gait, pelvic-obliquity-gait, and knee-hyperextension-gait walking. Four different classification methods including convolutional neural network (CNN), support vector machine (SVM), K-nearest neighbors (KNN), and long short-term memory (LSTM) neural networks were used to automatically classify three gait patterns. Overall, 750 sets of data were collected, and the dataset was divided into 80% for algorithm training and 20% for evaluation. Results: The SVM and KNN had a higher accuracy than CNN and LSTM. The SVM (94.9 ± 3.36%) had the highest accuracy in the classification of gait patterns, followed by KNN (94.0 ± 4.22%). The accuracy of CNN was 87.6 ± 7.50% and that of LSTM 83.6 ± 5.35%. Conclusions: This study revealed that the proposed AI machine learning (ML) techniques can be used to design gait biometric systems and machine vision for gait pattern recognition. Potentially, this method can be used to remotely evaluate elderly patients and help clinicians make decisions regarding disposition, follow-up, and treatment. [ABSTRACT FROM AUTHOR]

The significant scaffold offered by atropisomeric amides with a C–N chiral axis has been extensively utilized for pharmaceuticals, agricultural science, and organic syntheses. As a result, the field of atropisomer synthesis has attracted considerable interest within chemistry communities. To date, a range of catalytic atroposelective approaches has been reported for the efficient construction of these challenging scaffolds. However, greatly concise and highly useful methodologies for the synthesis of these atropisomeric compounds, focusing on transition-metal, chiral amine, and phosphoric acid catalysis reactions, etc., are still desirable. Hence, it is indispensable to succinctly and systematically present all such reports by means of disclosing the mechanistic analysis and application, as well as the challenges and issues associated with the establishment of these atropisomers. In this review, we summarize the development of catalytic asymmetric synthetic strategies to access non-biaryl atropisomers rotating around a C–N chiral axis, including the reaction methods, mechanism, late-stage transformations, and applications. [ABSTRACT FROM AUTHOR]

Simple Summary: Recent studies show that N6-methyladenosine (m6A) modification, the most common RNA chemical modification, influences the modification, processing, transport, and translation of RNA. N6-methyladenosine is an epigenetic modification that influences skeletal myogenesis and skeletal muscle development. However, the N6-methyladenosine modification profile and its function during poultry muscle development is unclear, and there is only one report about m6A modification in ducks, which focuses on duck hepatitis A virus infection. Here, we compared the m6A modification profiles between E13 (embryonic day 13) and E19 (embryonic day 19) in duck breast muscle differentiation using MeRIP-seq, and evaluated the expression profile of the methyl transferase METTL14 and its cofactors during breast muscle development. This is the first study of N6-methyladenosine modification patterns in duck muscle tissue. The current study not only elucidates the regulation mechanisms of duck skeletal muscle development, but also lays the groundwork for studying the role of RNA modification in poultry muscle development. N6-Methyladenosine is a reversible epigenetic modification that influences muscle development. However, the m6A modification profile during poultry skeletal muscle development is poorly understood. Here, we utilized m6A-specific methylated RNA immunoprecipitation sequencing to identify m6A sites during two stages of breast muscle development in ducks: embryonic days 13 (E13) and E19. MeRIP-seq detected 19,024 and 18,081 m6A peaks in the E13 and E19 groups, respectively. Similarly to m6A distribution in mammalian transcripts, our results revealed GGACU as the main m6A motif in duck breast muscle; they also revealed that m6A peaks are mainly enriched near the stop codons. In addition, motif sequence analysis and gene expression analysis demonstrated that m6A modification in duck embryo skeletal muscles may be mediated by the methyltransferase-like 14. GO and KEGG analysis showed that m6A peaks containing genes at E19 were mainly enriched in muscle-differentiation- and muscle-growth-related pathways, whereas m6A peaks containing genes in E13 were mainly enriched in embryonic development and cell proliferation pathways. Combined analysis of MeRIP-seq and RNA-seq showed that the mRNA expression may be affected by m6A modification. Moreover, qRT-PCR analysis of the expression of METTL14 and its cofactors (WTAP, ZC3H13, RBM15 and VIRMA) during duck embryonic skeletal muscle development in breast and leg muscle samples revealed a significant downward trend as the developmental age progressed. Our results demonstrated that m6A mRNA methylation modifications control muscle development in ducks. This is the first study of m6A modification patterns in duck muscle tissue development, and it lays the foundation for the study of the effects of RNA modification on poultry skeletal muscle development. [ABSTRACT FROM AUTHOR]

Hemoperfusion is regarded as the most effective treatment for hyperbilirubinemia. The adsorbent play crucial important role for bilirubin removal. An ideal adsorbent should possess good biocompatibility as well as high bilirubin adsorption capacity. In this study, two natural polymers composed of chitin and collagen plus KH560 that served as a crosslinking agent were selected to fabricate chitin/collagen composite aerogels (CKC), and potentially used as efficient bilirubin adsorption. The fabricated CKC aerogels exhibited homogeneous, dense and nanoscale 3D-porous nanofibrous structures. And the CKC aerogels showed high adsorption capacity (209.62 ± 2.28 mg/g) for free bilirubin within 4 h. More important, dynamic adsorption experiment illustrated the adsorption capacity reached to 265.22 ± 4.77 mg/g, larger than that of static adsorption. The further tests manifested the CKC aerogels had excellent blood compatibility and no toxicity in vivo. This novel naturally-based aerogels were an economical, biocompatible and efficient adsorbent for the bilirubin removal, potentially providing new ideas for development of new adsorbents. [Display omitted] • The CKC aerogels based on chitin and collagen can be used for bilirubin removal. • The CKC aerogels showed high adsorption capacity for bilirubin. • The CKC aerogels have excellent biocompatibility and no toxicity in vivo. [ABSTRACT FROM AUTHOR]

Ototoxic hearing loss results from hair cell death via reactive oxygen species (ROS) overproduction and consequent apoptosis. We investigated the effects of vitamin C (VC) on neomycin-induced HEI-OC1 cell damage, as well as the mechanism of inhibition. HEI-OC1 cells were treated with neomycin or with vitamin C (VC). The results indicated that VC had a protective effect on neomycin-induced HEI-OC1 cell death. Mechanistically, VC decreased neomycin-induced ROS generation, suppressed cell death, and increased cell viability. VC inhibited neomycin-induced apoptosis, ameliorated neomycin reduced antiapoptotic Bcl-2 expression, and suppressed neomycin increased expression of proapoptotic Bax, caspase-3 cleavage and caspase-8. TUNEL labeling demonstrated that VC blocked neomycin-induced apoptosis. Further study revealed that the effect of VC on neomycin-induced hair cell death was through interference with JNK activation and p38 phosphorylation. These results indicate that VC via suppressed ROS generation, which inhibited cell death by counteracting apoptotic signaling induced by neomycin in cells. Hence, VC is a potential candidate for protection agent against neomycin-induced HEI-OC1 cell ototoxicity. [ABSTRACT FROM AUTHOR]

In this article, we present a via-based hybrid metal–graphene metamaterial absorber with miniaturized periodicity, broad absorption band, and large-angle radar cross Section (RCS) reduction. The unit cell of the absorber is composed of a cross-shaped graphene film, four metal arrow-shaped patterns, and four cylindrical vias. By extending the length of vias and folding the shape of the pattern on the top, the unit size of this proposed absorber is reduced greatly, while its absorption performance maintains. Furthermore, the adopted hybrid metal–graphene structure avoids loading multiple lumped elements, and the complexity and the cost of the fabrication are reduced by screen-printing technology. Because of the elements with miniaturized periodicity, the proposed absorber can shift the grating lobe (GL) out of the absorption band when illuminated by a large-angle oblique incident wave. A prototype absorber is fabricated and measured. The period of the proposed absorber is about $0.045\lambda _{L}$ at the lowest operating frequency. To the best of our knowledge, it is the smallest among the reported counterparts. Experimental results show that the absorber exhibits broadband absorption around 2.73~7.54 GHz and efficient RCS reduction with no GL under a large incident angle. The equivalent circuit analysis, full-wave simulation, and measurement results are in good agreement. [ABSTRACT FROM AUTHOR]

Method of soft metal (Cu) strengthening of Ti3SiC2 was conducted to increase the hardness and improve the wear resistance of Ti3SiC2. Ti3SiC2/Cu composites containing 15 vol.% Cu were fabricated by Spark Plasma Sintering (SPS) in a vacuum. The effect of the sintering temperature on the phase composition, microstructure and mechanical properties of the composites was investigated in detail. The as-synthesized composites were thoroughly characterized by scanning electron micrography (SEM), optical micrography (OM) and X-ray diffractometry (XRD), respectively. The results indicated that the constituent of the Ti3SiC2/Cu composites sintered at different temperatures included Ti3SiC2, Cu3Si and TiC. The formation of Cu3Si and TiC originated from the reaction between Ti3SiC2 and Cu, which was induced by the presence of Cu and the de-intercalation of Si atoms Ti3SiC2. OM analysis showed that with the increase in the sintering temperature, the reaction between Ti3SiC2 and Cu was severe, leading to the Ti3SiC2 getting smaller and smaller. SEM measurements illustrated that the uniformity of the microstructure distribution of the composites was restricted by the agglomeration of Cu, controlling the mechanical behaviors of the composites. At 1000 °C, the distribution of Cu in the composites was relatively even; thus, the composites exhibited the highest density, relatively high hardness and compressive strength. The relationships of the temperature, the current and the axial dimension with the time during the sintering process were further discussed. Additionally, a schematic illustration was proposed to explain the related sintering characteristic of the composites sintered by SPS. The as-synthesized Ti3SiC2/Cu composites were expected to improve the wear resistance of polycrystalline Ti3SiC2. [ABSTRACT FROM AUTHOR]

Purpose: We aimed to analyse the reasons behind the need for cochlear implant revision surgeries, as well as the rate at which they occur, to reduce the revision surgery rate for non-device failures. We also aimed to elucidate the cumulative survival and device survival rates in different age groups. Methods: This retrospective single cohort study reviewed 4563 cochlear implant surgeries and 119 revision surgeries performed at a tertiary referral hospital in China between 1996 and 2019. Kaplan–Meier curves were used to calculate the cumulative survival and device survival rates. Results: The revision surgery rate was 2.61%. The reasons for revision included device (73.1%) and non-device (26.9%) failures. The most common reasons were hard device (47.1%) and non-device failure (28.6%). The 10- and 20-year cumulative survival rates were 96.8% and 96.7%, respectively. Younger children were more likely to undergo a second surgery. Conclusion: This study is the longest study about revision surgery in China. Cochlear implantation is a reliable treatment. It has a low complication rate in patients with sensorineural hearing loss. Children have a higher revision rate than adults. Doctors should be aware of each complication and perform the appropriate procedure. [ABSTRACT FROM AUTHOR]

In recent times, the supercritical carbon dioxide (scCO2) process has attracted increasing attention in fabricating diverse materials due to the attractive features of environmentally benign nature and economically promising character. Owing to these unique characteristics and high-penetrability, as well as diffusivity conditions of scCO2, this high-pressure technology, with mild operation conditions, cost-effective, and non-toxic, among others, is often applied to fabricate various organic and inorganic-based materials, resulting in the unique crystal architectures (amorphous, crystalline, and heterojunction), tunable architectures (nanoparticles, nanosheets, and aerogels) for diverse applications. In this review, we give an emphasis on the fabrication of various inorganic-based materials, highlighting the recent research on the driving factors for improving the quality of fabrication in scCO2, procedures for production and dispersion in scCO2, as well as common indicators utilized to assess quality and processing ability of materials. Next, we highlight the effects of specific properties of scCO2 towards synthesizing the highly functional inorganic-based nanomaterials. Finally, we summarize this compilation with interesting perspectives, aiming to arouse a more comprehensive utilization of scCO2 to broaden the horizon in exploring the green/eco-friendly processing of such versatile inorganic-based materials. Together, we firmly believe that this compilation endeavors to disclose the latent capability and universal prevalence of scCO2 in the synthesis and processing of inorganic-based materials. [ABSTRACT FROM AUTHOR]

Conversion‐type electrode materials have gained massive research attention in sodium‐ion batteries (SIBs), but their limited reversibility hampers practical use. Herein, we report a bifunctional nanoreactor to boost highly reversible sodium‐ion storage, wherein a record‐high reversible degree of 85.65 % is achieved for MoS2 anodes. Composed of nitrogen‐doped carbon‐supported single atom Mn (NC‐SAMn), this bifunctional nanoreactor concurrently confines active materials spatially and catalyzes reaction kinetics. In situ/ex situ characterizations including spectroscopy, microscopy, and electrochemistry, combined with theoretical simulations containing density functional theory and molecular dynamics, confirm that the NC‐SAMn nanoreactors facilitate the electron/ion transfer, promote the distribution and interconnection of discharging products (Na2S/Mo), and reduce the Na2S decomposition barrier. As a result, the nanoreactor‐promoted MoS2 anodes exhibit ultra‐stable cycling with a capacity retention of 99.86 % after 200 cycles in the full cell. This work demonstrates the superiority of bifunctional nanoreactors with two‐dimensional confined and catalytic effects, providing a feasible approach to improve the reversibility for a wide range of conversion‐type electrode materials, thereby enhancing the application potential for long‐cycled SIBs. [ABSTRACT FROM AUTHOR]

Conversion‐type electrode materials have gained massive research attention in sodium‐ion batteries (SIBs), but their limited reversibility hampers practical use. Herein, we report a bifunctional nanoreactor to boost highly reversible sodium‐ion storage, wherein a record‐high reversible degree of 85.65 % is achieved for MoS2 anodes. Composed of nitrogen‐doped carbon‐supported single atom Mn (NC‐SAMn), this bifunctional nanoreactor concurrently confines active materials spatially and catalyzes reaction kinetics. In situ/ex situ characterizations including spectroscopy, microscopy, and electrochemistry, combined with theoretical simulations containing density functional theory and molecular dynamics, confirm that the NC‐SAMn nanoreactors facilitate the electron/ion transfer, promote the distribution and interconnection of discharging products (Na2S/Mo), and reduce the Na2S decomposition barrier. As a result, the nanoreactor‐promoted MoS2 anodes exhibit ultra‐stable cycling with a capacity retention of 99.86 % after 200 cycles in the full cell. This work demonstrates the superiority of bifunctional nanoreactors with two‐dimensional confined and catalytic effects, providing a feasible approach to improve the reversibility for a wide range of conversion‐type electrode materials, thereby enhancing the application potential for long‐cycled SIBs. [ABSTRACT FROM AUTHOR]

Manipulation of long‐lived triplet excitons in organic molecules is key to applications including next‐generation optoelectronics, background‐free bioimaging, information encryption, and photodynamic therapy. However, for organic room‐temperature phosphorescence (RTP), which stems from triplet excitons, it is still difficult to simultaneously achieve efficiency and lifetime enhancement on account of weak spin–orbit coupling and rapid nonradiative transitions, especially in the red and near‐infrared region. Herein, we report that a series of fluorescent naphthalimides—which did not originally show observable phosphorescence in solution, as aggregates, in polymer films, or in any other tested host material, including heavy‐atom matrices at cryogenic temperatures—can now efficiently produce ultralong RTP (ϕ=0.17, τ=243 ms) in phthalimide hosts. Notably, red RTP (λRTP=628 nm) is realized at a molar ratio of less than 10 parts per billion, demonstrating an unprecedentedly low guest‐to‐host ratio where efficient RTP can take place in molecular solids. [ABSTRACT FROM AUTHOR]

Manipulation of long‐lived triplet excitons in organic molecules is key to applications including next‐generation optoelectronics, background‐free bioimaging, information encryption, and photodynamic therapy. However, for organic room‐temperature phosphorescence (RTP), which stems from triplet excitons, it is still difficult to simultaneously achieve efficiency and lifetime enhancement on account of weak spin–orbit coupling and rapid nonradiative transitions, especially in the red and near‐infrared region. Herein, we report that a series of fluorescent naphthalimides—which did not originally show observable phosphorescence in solution, as aggregates, in polymer films, or in any other tested host material, including heavy‐atom matrices at cryogenic temperatures—can now efficiently produce ultralong RTP (ϕ=0.17, τ=243 ms) in phthalimide hosts. Notably, red RTP (λRTP=628 nm) is realized at a molar ratio of less than 10 parts per billion, demonstrating an unprecedentedly low guest‐to‐host ratio where efficient RTP can take place in molecular solids. [ABSTRACT FROM AUTHOR]

• Droplet digital PCR (ddPCR) has emerged as a promising tool for pathogen detection. • The application, advantages of ddPCR in detecting pathogen were summarized. • Complicating issues and future prospects of ddPCR in detecting pathogen were discussed. The microbial infectious diseases (infectious diseases) represent the leading global public health problem, and the effective treatment depends on rapid and accurate detection of pathogens. Droplet digital PCR (ddPCR), a new assay that combines microfluidics technology with TaqMan-based PCR, provides absolute quantification without the need of the standard curves. With the development of ddPCR, it has become an ideal tool for microorganism detection. In this review, we summarized the major literature with regard to the application of ddPCR in detecting the pathogenic microorganisms of infectious diseases, including bacteria, fungi, and virus. The ddPCR method has the advantages of detecting the targeted DNA of infectious microorganisms, with high sensitivity, high precision, and absolute quantification. Thus, ddPCR has emerged as a promising and reliable tool in detecting pathogenic microorganisms. [ABSTRACT FROM AUTHOR]

In this paper, we address the challenge of background generalization in surface defect segmentation for surface-mounted device chips, particularly focusing on template-sample comparison algorithms. These algorithms often struggle with background features in templates and samples that exhibit spatial variations, including translation and rotation. The inherent spatial equivariance in CNN-based algorithms complicates the elimination of noise attributed to these spatial variations. To address this issue, we developed the Background Generalization Networks (BGNet). BGNet effectively reduces spatial variation noise by subtracting background features of samples and templates based on their matching relationships. It starts by extracting dense features rich in global and interactive information via a Siamese network and then applies self- and cross-attention mechanisms from Transformers. The matching score is calculated based on feature similarity, with matching relations established using the Mutual Nearest Neighbour (MNN) algorithm. These relations enable us to mitigate the noise caused by spatial variations and implement a multiscale fusion of detailed and semantic information, leading to more accurate segmentation results. Our experiments on OCDs and PCBs have shown that BGNet surpasses existing state-of-the-art methods in terms of performance. Furthermore, the code for this work is available on GitHub: https://github.com/Max-Chenb/BG-Net. [ABSTRACT FROM AUTHOR]

We consider in this paper the angular deviation and diffraction efficiency of the reflection gratings in Littrow-configuration for applications of external cavity diode laser using the rigorous coupled-wave analysis method. We consider the three-dimensional diffraction case in general, where the incidence plane is un-parallel with the grating vector, i.e. conical diffraction. The angular tolerance of arbitrary gratings under plane and conical diffraction are thus derived and presented. A typical blazed grating is chosen as an example to calculate its diffraction efficiency using the rigorous coupled-wave analysis method. Furthermore, we point out that the angular tolerance and reflection efficiency can be improved if the appropriate parameter settings are selected for Littrow-configuration devices, including incidence angle, diffraction order, grating period and blazed angle. Otherwise, a tiny slanting angle of the grating vector deviated from the incidence plane will deviate the feedback light away from entering the laser-diode-chip and halt laser oscillation in the external cavity. Finally, a general rule for the parameter settings in Littrow-configuration is provided as a benchmark. • Here, the angular deviation of arbitrary one-dimensional gratings is derived, calculated and presented in a general conical diffraction case. • The diffraction efficiency is calculated with rigorous coupled-wave analysis (RCWA) method and parameter analysis is presented. Two strategies for searching maximum diffraction efficiency are introduced and compared. • A general rule is provided for the parameter settings in Littrow-configuration devices for different applications. [ABSTRACT FROM AUTHOR]

We characterize the asymptotic performance of nonparametric one- and two-sample testing. The exponential decay rate or error exponent of the type-II error probability is used as the asymptotic performance metric, and an optimal test achieves the maximum rate subject to a constant level constraint on the type-I error probability. With Sanov’s theorem, we derive a sufficient condition for one-sample tests to achieve the optimal error exponent in the universal setting, i.e., for any distribution defining the alternative hypothesis. We then show that two classes of Maximum Mean Discrepancy (MMD) based tests attain the optimal type-II error exponent on $\mathbb R^{d}$ , while the quadratic-time Kernel Stein Discrepancy (KSD) based tests achieve this optimality with an asymptotic level constraint. For general two-sample testing, however, Sanov’s theorem is insufficient to obtain a similar sufficient condition. We proceed to establish an extended version of Sanov’s theorem and derive an exact error exponent for the quadratic-time MMD based two-sample tests. The obtained error exponent is further shown to be optimal among all two-sample tests satisfying a given level constraint. Our work hence provides an achievability result for optimal nonparametric one- and two-sample testing in the universal setting. Application to off-line change detection and related issues are also discussed. [ABSTRACT FROM AUTHOR]

Ileal neobladder construction is a common treatment for patients with bladder cancer after radical cystectomy. However, metabolic disorders caused by transposed bowel segments occur frequently. Bladder tissue engineering is a promising alternative approach. Although numerous studies have reported bladder reconstruction using acellular and cellular scaffolds, there are also disadvantages associated with these methods, such as immunogenicity of synthetic grafts and incompatible mechanical properties of the biomaterials. Here, we engineered an autologous peritoneal graft consisting of a peritoneal sheet and the seromuscular layer from the ileum. Three months after the surgery, compared with the neobladder made from the ileum, the reconstructed neobladder using our new method showed normal function and better gross morphological characteristics. Moreover, histopathological and transcriptomic analysis revealed urothelium-like cells expressing urothelial biomarkers appeared in the neobladder, while no such changes were observed in the control group. Overall, our study provides a new strategy for bladder tissue engineering and informs a variety of future research prospects. [ABSTRACT FROM AUTHOR]

Ileal neobladder construction is a common treatment for patients with bladder cancer after radical cystectomy. However, metabolic disorders caused by transposed bowel segments occur frequently. Bladder tissue engineering is a promising alternative approach. Although numerous studies have reported bladder reconstruction using acellular and cellular scaffolds, there are also disadvantages associated with these methods, such as immunogenicity of synthetic grafts and incompatible mechanical properties of the biomaterials. Here, we engineered an autologous peritoneal graft consisting of a peritoneal sheet and the seromuscular layer from the ileum. Three months after the surgery, compared with the neobladder made from the ileum, the reconstructed neobladder using our new method showed normal function and better gross morphological characteristics. Moreover, histopathological and transcriptomic analysis revealed urothelium-like cells expressing urothelial biomarkers appeared in the neobladder, while no such changes were observed in the control group. Overall, our study provides a new strategy for bladder tissue engineering and informs a variety of future research prospects. [ABSTRACT FROM AUTHOR]

Influenza A virus (IAV) infection regulates the expression of numerous host genes. However, the precise mechanism underlying implication of these genes in IAV pathogenesis remains largely unknown. Here, we employed isobaric tags for relative and absolute quantification (iTRAQ) to identify host proteins regulated by IAV infection. iTRAQ analysis of mouse lungs infected or uninfected with IAV showed a total of 167 differentially upregulated proteins in response to the viral infection. Interestingly, we observed that p27Kip1, a potent cyclin‐dependent kinase inhibitor, was markedly induced by IAV both at mRNA and protein levels through in vitro and in vivo studies. Furthermore, it was shown that innate immune signalling positively regulated p27Kip1 expression in response to IAV infection. Ectopic expression of p27Kip1 in A549 cells dramatically inhibited IAV replication, whereas, p27Kip1 knockdown significantly enhanced the virus replication. in vivo experiments demonstrated that p27Kip1 knockout (KO) mice were more susceptible to IAV than wild‐type (WT) mice: exhibiting higher viral load in lung tissue, faster body‐weight loss, reduced survival rate and more severe organ damage. Moreover, we found that p27Kip1 overexpression facilitated the degradation of viral NS1 protein, caused a dramatic STAT1 activation and promoted the expression of IFN‐β and several critical antiviral interferon‐stimulated genes (ISGs). Increased p27Kip1 expression also restricted infections of several other viruses. Conversely, IAV‐infected p27Kip1 KO mice exhibited a sharp increase in NS1 protein accumulation, reduced level of STAT1 activation and decreased expression of IFN‐β and the ISGs in the lung compared to WT animals. These findings reveal a key role of p27Kip1 in enhancing antiviral innate immunity. [ABSTRACT FROM AUTHOR]

Background: In this study, we sought to evaluate the correlation between TV, GTD, and lymph node metastases in NSCLC patients with tumors of GTD ≤ 3.0 cm. Methods: We retrospectively analyzed the characteristics of clinicopathologic variables for lymph node involvement in 285 NSCLC patients with tumors of GTD ≤ 3.0 cm who accepted curative surgical resection. The TVs were semi-automatically measured by a software, and optimal cutoff points were obtained using the X-tile software. The relationship between GTD and TV were described using non-linear regression. The correlation between GTD, TV, and N stages was analyzed using the Pearson correlation coefficient. The one-way ANOVA was used to compare the GTD and TV of different lymph node stage groups. Results: The relationship between GTD and TV accorded with the exponential growth model: y = 0.113e1.455x (y = TV, x = GTD). TV for patients with node metastases (4.78 cm3) was significantly greater than those without metastases (3.57 cm3) (P < 0.001). However, there were no obvious GTD differences in cases with or without lymph node metastases (P = 0.054). We divided all cases into three TV groups using the two cutoff values (0.9 cm3 and 3.9 cm3), and there was an obvious difference in the lymphatic involvement rate between the groups (P < 0.001). The tendency to metastasize was greater with higher TV especially when the TV was > 0.9–14.2 cm3 (P = 0.010). Conclusions: For NSCLC tumors with GTD ≤ 3.0 cm, TV is a more sensitive marker than GTD in predicting the positive lymph node metastases. The likelihood for metastasis increases with an increasing TV especially when GTD is > 2.0–3.0 cm. [ABSTRACT FROM AUTHOR]

Online experiments are growing in popularity. This study aimed to determine the timing accuracy of web technologies and investigate whether they can be used to support high temporal precision psychology experiments. A dynamic sinusoidal grating and flashes were produced by setInterval, CSS3, and requestAnimationFrame (hereafter, rAF) technologies. They were run at normal or real-time priority processing in Chrome, Firefox, Edge, and Internet Explorer on Windows, macOS, and Linux. Timing accuracies were compared with that of Psychtoolbox which was chosen as gold standard. It was found that rAF with real-time priority had the best timing accuracy compared to the other web technologies and had a similar timing accuracy as Psychtoolbox in traditional experiments in most cases. However, rAF exhibited poor timing accuracy on Linux. Therefore, rAF can be used as technical basis for accuracy of millisecond timing sequences in online experiments, thereby benefiting the psychology field. [ABSTRACT FROM AUTHOR]

The present study investigated the effects of four woody forages (Moringa oleifera Lam (MOL), fermented MOL, Folium mori (FM) and fermented FM) on biodiversity and bioactivity of aerobic culturable gut bacteria of tilapia (Oreochromis niloticus) by a traditional culture-dependent method. A total of 133 aerobic culturable isolates were recovered and identified from the gut of tilapia, belonging to 35 species of 12 genera in three bacterial phyla (Firmicutes, Actinobacteria and Proteobacteria). Among them, 6 bacterial isolates of Bacillus baekryungensis, Bacillus marisflavi, Bacillus pumilus, Bacillus methylotrophicus, Proteus mirabilis and Pseudomonas taiwanensis were isolated from all the five experimental groups. The Bray-Curtis analysis showed that the bacterial communities among the five groups displayed obvious differences. In addition, this result of bioactivity showed that approximate 43% of the aerobic culturable gut bacteria of tilapia displayed a distinct anti-bacterial activity against at least one of four fish pathogens Streptococcus agalactiae, Streptococcus iniae, Micrococcus luteus and Vibrio parahemolyticus. Furthermore, Bacillus amyloliquefaciens and Streptomyces rutgersensis displayed strong activity against all four indicator bacteria. These results contribute to our understanding of the intestinal bacterial diversity of tilapia when fed with woody forages and how certain antimicrobial bacteria flourished under such diets. This can aid in the further exploitation of new diets and probiotic sources in aquaculture. [ABSTRACT FROM AUTHOR]

Acne is the eighth most common disease worldwide. Disease burden of acne such as anxiety, reduced self-esteem, and facial scarring lowers the life quality of acne patients. Isotretinoin is the most potent treatment for moderate-severe acne. However, the adverse events of isotretinoin especially teratogenicity limit its use. This study aims at investigating the therapeutical mechanisms of isotretinoin using bioinformatics analysis. Differentially expressed genes (DEGs) were filtered from microarray datasets GSE10432, GSE10433, and GSE11792. Functional and pathway enrichment analyses of DEGs were performed. Protein–protein interaction (PPI) network and module analyses were also conducted based on DEGs. Using isotretinoin for 1 week, LCN2, PTGES, and GDF15 were upregulated and might mediate sebocytes apoptosis and thus decreased sebum production; CCL2 originated from activated TNF signaling pathway and S100A7 could be related with "acne-flare". While treating with isotretinoin for 8 weeks, key genes were downregulated, including HMGCS1, HMGCR, FDFT1, MVD, IDI1, and FDPS, which may be associated with decreased sebum synthesis; HMGCS1, HMGCR, and FDFT1 also probably associated with apoptosis of sebocytes. There were only two common genes including ACSBG1 and BCAT2 which worked in both 1 week and 8 weeks and could associate with decreased sebum synthesis and apoptosis of sebocytes, respectively. These results indicate potential therapeutics and side effect mechanisms of isotretinoin in the acne treatment and provide a research direction to further investigate the therapeutic mechanism of isotretinoin and thus develop retinoid-like compounds with similar curative effect and without teratogenicity. [ABSTRACT FROM AUTHOR]

Organic luminogens with persistent room‐temperature phosphorescence (RTP) have found a wide range of applications. However, many RTP luminogens are prone to severe quenching in the crystalline state. Herein, we report a strategy to construct a donor‐sp3‐acceptor type luminogen that exhibits aggregation‐induced emission (AIE) while the donor‐sp2‐acceptor counterpart structure exhibits a non‐emissive solid state. Unexpectedly, it was discovered that a trace amount (0.01 %) of the structurally similar derivative, produced by a side reaction with the DMF solvent, could induce strong RTP with an absolute RTP yield up to 25.4 % and a lifetime of 48 ms, although the substance does not show RTP by itself. Single‐crystal XRD‐based calculations suggest that n–σ* orbital interactions as a result of structural similarity may be responsible for the strong RTP in the bicomponent system. This study provides a new insight into the design of multi‐component, solid‐state RTP materials from organic molecular systems. [ABSTRACT FROM AUTHOR]

Organic luminogens with persistent room‐temperature phosphorescence (RTP) have found a wide range of applications. However, many RTP luminogens are prone to severe quenching in the crystalline state. Herein, we report a strategy to construct a donor‐sp3‐acceptor type luminogen that exhibits aggregation‐induced emission (AIE) while the donor‐sp2‐acceptor counterpart structure exhibits a non‐emissive solid state. Unexpectedly, it was discovered that a trace amount (0.01 %) of the structurally similar derivative, produced by a side reaction with the DMF solvent, could induce strong RTP with an absolute RTP yield up to 25.4 % and a lifetime of 48 ms, although the substance does not show RTP by itself. Single‐crystal XRD‐based calculations suggest that n–σ* orbital interactions as a result of structural similarity may be responsible for the strong RTP in the bicomponent system. This study provides a new insight into the design of multi‐component, solid‐state RTP materials from organic molecular systems. [ABSTRACT FROM AUTHOR]

Metal-free photocatalysts have attracted great attention in hydrogen production under visible light due to their low cost and abundance. Inspired by the structure of chloroplast-granum, here we prepare a new porous nanorod composed of F-doped g-C 3 N 4 ultrathin nanosheet for photocatalytic hydrogen evolution. The obtained g-C 3 N 4 (FCN-PNRs) show layer-by-layer stacked structure for highly efficient light hasting, exhibit F-doping for highly charge separation efficiency, and display porous structure for exposing a large amount of photocatalytic activity sites. These findings have been studied by various characterizations, such as Brunauer-Emmett-Teller, and Photoluminescence. As a result, the hydrogen production performance for the optimized FCN-PNRs photocatalyst reaches 2600 μmol h−1 g−1 under visible light, which is almost 16 times higher than bulk g-C 3 N 4. This study not only reports a new chloroplast-granum-inspired g-C 3 N 4 photocatalyst, but also provides new views to the fabrication and design of nature-inspired metal-free structures for catalysis applications. Inspired by chloroplast-granum, we prepare a new porous nanorod for highly photocatalytic hydrogen evolution, which is nearly 16 times higher than that of bulk g-C 3 N 4. Image 1 • Chloroplast-granum g-C 3 N 4 nanorods with fluorine-doped were synthesized. • NH 4 F solution played a key role on the morphology of fluorine-doped g-C 3 N 4. • Fluorine-doping improves the optical and conductive properties. • Porous network enhances the transmission capacity of photogenerated electrons. • The photocatalysts exhibit an apparent quantum efficiency of 13.98% at 420 nm. [ABSTRACT FROM AUTHOR]

Emerging high entropy compounds (HECs) have attracted huge attention in electrochemical energy‐related applications. The features of ultrafine size and carbon incorporation show great potential to boost the ion‐storage kinetics of HECs. However, they are rarely reported because high‐temperature calcination tends to result in larger crystallites, phase separation, and carbon reduction. Herein, using the NaCl self‐assembly template method, by introducing a high‐pressure field in the calcination process, the atom diffusion and phase separation are inhibited for the general formation of HECs, and the HEC aggregation is inhibited for obtaining ultrafine size. The general preparation of ultrafine‐sized (<10 nm) HECs (nitrides, oxides, sulfides, and phosphates) anchored on porous carbon composites is realized. They are demonstrated by combining advanced characterization technologies with theoretical computations. Ultrafine‐sized high entropy sulfides‐MnFeCoCuSnMo/porous carbon (HES‐MnFeCoCuSnMo/PC) as representative anodes exhibit excellent sodium‐ion storage kinetics and capacities (a high rating capacity of 278 mAh g−1 at 10 A g−1 for full cell and a high cycling capacity of 281 mAh g−1 at 20 A g−1 after 6000 cycles for half cell) due to the combining advantages of high entropy effect, ultrafine size, and PC incorporation. Our work provides a new opportunity for designing and fabricating ultrafine‐sized HECs. [ABSTRACT FROM AUTHOR]

Emerging high entropy compounds (HECs) have attracted huge attention in electrochemical energy‐related applications. The features of ultrafine size and carbon incorporation show great potential to boost the ion‐storage kinetics of HECs. However, they are rarely reported because high‐temperature calcination tends to result in larger crystallites, phase separation, and carbon reduction. Herein, using the NaCl self‐assembly template method, by introducing a high‐pressure field in the calcination process, the atom diffusion and phase separation are inhibited for the general formation of HECs, and the HEC aggregation is inhibited for obtaining ultrafine size. The general preparation of ultrafine‐sized (<10 nm) HECs (nitrides, oxides, sulfides, and phosphates) anchored on porous carbon composites is realized. They are demonstrated by combining advanced characterization technologies with theoretical computations. Ultrafine‐sized high entropy sulfides‐MnFeCoCuSnMo/porous carbon (HES‐MnFeCoCuSnMo/PC) as representative anodes exhibit excellent sodium‐ion storage kinetics and capacities (a high rating capacity of 278 mAh g−1 at 10 A g−1 for full cell and a high cycling capacity of 281 mAh g−1 at 20 A g−1 after 6000 cycles for half cell) due to the combining advantages of high entropy effect, ultrafine size, and PC incorporation. Our work provides a new opportunity for designing and fabricating ultrafine‐sized HECs. [ABSTRACT FROM AUTHOR]