Search

In order to prevent in-flight fatigue failure, a numerical analysis of in service-operative cases is an useful approach for preliminary evaluation of most stressed and critical zones in components of aeronautical engine. The zero-stage compressor rotor disk and blades represent one of the most critical part of aircraft turbojet. This paper presents a verification FEM analysis of this component. An accurate 3D scanning was performed to reconstruct both blade and disk real geometry and the detailed point cloud was obtained and opportunely elaborated by using specific software to generate CAD sections and volumes given in input to finite element analysis. The stress field due to different operating conditions is studied for a suitable evaluation of the most stressed and critical areas where a failure may occur, particularly near the rotor connection under contact conditions. FEM and flight data analysis are finally used for a subsequent fatigue life verification, based on classical Palmgren Miner' rule. The suggested procedure for verification of engine aeronautical component is here optimized for maintenance program improvements. [ABSTRACT FROM AUTHOR]

Rotenone, azadirachtin, pyrethrins and copper fungicide decay curves were determined in olives and olive oil samples after experimental trials, consisting of one, two and three applications of each active ingredient, were carried out twice in 2005 and 2006. Rotenone, azadiracthin and pyrethrins were analyzed by extraction with acetonitrile and determined by liquid chromatography; copper was extracted into aqueous HCl and determined by chemical stripping. Pyrethrins were always found but in levels below the acceptable limits, whereas rotenone and copper residues always exceeded, after the pre-harvest interval, the maximum threshold allowed for olives. As regards residues in olive oil, rotenone was found in concentrations higher than those detected in olives. Copper accumulated in olives according to the number of applications, whereas, in oil, the residue was always lower than the maximum residue limit. The sensitivity of the method applied did not allow detection of azadirachtin. [ABSTRACT FROM AUTHOR]