Search

Calibrated microwave power and phase measurements are presented for the first recirculating planar magnetron prototype consisting of two coupled six-cavity 1-GHz planar cavity arrays. The results are presented for a solid cathode and two mode-control cathodes (MCCs) with aluminum or velvet electron emitters. The measurements were conducted using a prototype coaxial microwave power extraction scheme. The experimental operating parameters included: pulsed cathode voltages between −250 and −300 kV, voltage pulselengths of 200–600 \mu \texts , axial magnetic fields of 0.1–0.32 T, and entrance currents of 1–10 kA. The results showed improved oscillator frequency locking for the MCCs and increases in power and efficiency using the velvet electron emitter. [ABSTRACT FROM PUBLISHER]

Microwave oscillation has been measured for the first time in a 12-cavity axial-magnetic-field recirculating planar magnetron, designed to operate in \pi mode at 1 GHz. The device operates with a -300-kV pulsed cathode voltage and a 0.2-T axial magnetic field, and oscillates at transverse currents exceeding 1 kA when driven by an electron beam pulselength between 0.5 and 1 \mu\s. Microwave pulses were measured at frequencies between 0.97–1 GHz and achieved several hundred nanoseconds in length. Mode competition was observed between the \pi and 5 \pi/6 modes. [ABSTRACT FROM PUBLISHER]

We present a simple design method for the hole-slot-type cavity magnetron. Our design model includes all principal parts of magnetron, namely, the cathode, the resonant system, the interaction space, and the magnetic circuit. We first find structural, electrical, and magnetic parameters using empirical formulas. Then, using empirical values as initial guesses, we build and simulate the 3-D model of magnetron in CST Particle Studio. In CST, we show that the eigenmode solver is essential for proper mode excitation; then, we use particle tracking and particle-in-cell simulations for the desired magnetron operation. For a fast convergent result, we study the impact of design parameters on the magnetron performance. We apply this design procedure to an X-band hole-slot-type magnetron with eight resonators. We believe that our method provides designers a simple, fast, and reliable tool for hole-slot-type magnetron design. [ABSTRACT FROM PUBLISHER]