Search

This paper describes the life and work of Louis Ombrédanne, one of the founding fathers of the SICOT, a notorious French orthopaedic and paediatric surgeon with a strong interest in plastic surgery and reconstruction of post-traumatic defects and also with limb lengthening and treatment of sequalae. Born in Paris in 1871 as a son of a general practitioner doctor, Ombrédanne was a brilliant student enjoying anatomy and surgery since the early years. He was appointed as a Surgeon in 1902 in Paris and became Professor of Surgery in 1907. During the First World War, he worked in Verdun, one of the most exposed hospitals near the battlefield where over 700.000 people died and many cases were affected by head and neck burns and destructions, requiring surgical reconstruction. After the war, Ombrédanne developed Pediatric Surgery and it seems that his powerful drive and charisma explain why these specialties are studied together with orthopaedics in Europe and later in the World. Many innovations like the anaesthetic inhaler with face mask were authored by Ombrédanne and also techniques of limb lengthening, thoracic plasty. He described malignant hyperthermia in children and worked in the Sick Children Hospital in Paris, today Hôpital Necker. In 1929, Ombrédanne participated with a group of enthusiastic surgeons and teachers from many countries to the creation of SICOT during a historical meeting held in Hotel Crillon in Paris. This paper introduces Ombrédanne's work to the current readers and is a tribute to the work of our ancestors who made possible the development of our specialty. [ABSTRACT FROM AUTHOR]

Introduction: Since 1962, the low friction arthroplasty developed by Sir John Charnley has given us very good long terms results at more than 40 years follow up, but dislocation remains a major complication. The dislocation rate is a permanent risk during the life of the patient and the prosthesis, defined by J. Caton and D. Berry in 2004 as a cumulative risk. History and concept development: The concept of dual mobility was thought up by G. Bousquet, A. Rambert and J. Rieu in the 1970s (1974-1979). The first one in 1979 was called NOVAE and combined two articulations: one large and one smaller by a recruitement phenomenon increasing the jumps distance and so decreasing dislocation forces. In 2003, D. Noyer published the first paper about the «third articulation»: a true metal/PE bearing. Since 1996, twenty years after the first patent, many dual mobility cups have been developed with various fixation ways and various designs.Conclusion: Today with the same principles there are many differences for the «third generation» with excellent results at more than ten years FU with less than 1% to 2% dislocation rate in primary, revision, recurrent THA dislocation and THA after femoral neck fractures. [ABSTRACT FROM AUTHOR]

An editorial is presented on the dual-mobility cup (DMC) concept which provides better range of motion (ROM) and jumping distance in patients following total hip arthroplasty (THA). It expresses the view that DMC sockets represent the best option for treatment of THA instability. It also mentions the French Orthopaedic Society (SOFCOT) matched case-control study which compared the standard and DMC cups in revision surgery.

Children with an exostosis-related Bessel-Hagen [[8]] disease or an Ollier disease [[9]] need to be checked regularly during growth, and the operative indication needs to be set at R > U + 20 mm, with monitoring set at R > U + 10 mm. The difference is in the nature of chondromas: enchondromas with risk of severe degeneration for the Ollier disease and exochondromas for hereditary multiple exostosis, also known as Bessel-Hagen disease [[8]] (the history matters). In my own work, 10/14 patients had a Bessel-Hagen disease, and 4/14 had an Ollier disease. [Extracted from the article]

Introduction: Instability is a major complication in revision total hip arthroplasty (THA). Dual mobility (DM) cups were shown to reduce the risk of post-operative implant dislocation. Few case-series studies assessed the outcomes of cemented DM cups when associated to acetabular reconstruction antiprotrusio cages. No published comparative studies were found to look for outcome differences between standard cups (SC) and DM cups in first revision THA associated with a Kerboull plate (KP) and acetabular bone grafting.Materials and Methods: This is a retrospective comparative study of two groups of patients in two institutions. All cases were first revision THA with KP reconstruction; a cemented standard cup (SC) was used in one institution (THA-SC group) while a cemented DM cup was used in the second institution (THA-DM group). The posterolateral approach and the same technique for KP placement, the cross technique, were performed in both groups. Primary outcomes were dislocation and revision rates. Survivorship and clinical and radiological results were set to be secondary outcomes. There were ten patients (13 hips) in the first group and 16 patients (16 hips) in the second with a mean follow-up clinical and radiological evaluation of 74.2 ± 47.9 months.Results: Besides age, no significant demographic differences were present between both groups. There were three dislocations (23%) in the first group treated with close reduction compared to none in the second (p = 0.04). No further episode of dislocation or revision surgery occurred until the last follow-up in both groups. The mean Harris Hip Scores for the THA-SC and THA-DM groups were 87.5 ± 10.9 and 87.4 ± 12.1, respectively. When present, radiolucent lines were less than 1 mm thick and were non-progressive in both groups. In all patients, complete trabeculation remodeling or cortical repair of the graft was observed.Conclusion: The cup type was the single variable which could account for the observed dislocation rate difference. The mid-term results of using DM cups with KP in first revision THA seem very encouraging. Our findings add to the previously published results on the excellent outcomes in terms of stability in revision THA when using DM cups. [ABSTRACT FROM AUTHOR]

Introduction: We described in 1981 a method to evaluate patellar height in normal and symptomatic knees on sagittal X-ray view. This index is a frequently used method, yet it is not suitable after a total knee arthroplasty (TKA).Material and Method: The original method measures the distance between the distal margin of the articular surface of the patella (point A) and the anterosuperior angle of the tibial plateau (point T), then the length of the patellar articular surface (AP). The index is AT/AP ratio (normal values range from 0.8 to 1.2). After TKA, the T landmark is no longer available, so we must define a new T' landmark. This point is situated at the intersection between the line perpendicular to the tibial posterior cortex elevated at the tip of the fibular head and the tibial anterior cortex. This remarkable landmark can be identified before and after TKA, with a new relative index AT'/AP ratio. This modified method allows the comparison of patella height before and after TKA.Results: We have used this modified index with the collaboration of several authors during the testing of different models of TKA, with an accurate reproducibility. Repeatability (usually called intra-observer reliability) was good, with intra-class correlation coefficients (ICCs) between 0.58 and 0.75 among the observers. Reproducibility (usually called inter-observer reliability) was also considered as good, with ICC ranging from 0.64 to 0.72.Discussion: Patella height measurement has to be assessed with the original method (AT/AP) to detect patella infera that could influence the surgical approach. The correlation between original and modified indexes has to be assessed. The modification of patella height after TKA could be evaluated through the modified index and compared with functional results. [ABSTRACT FROM AUTHOR]

Introduction: Since the first measurement method of patella height in 1929 (Janssen), more than 16 methods have been described. Most of these measures are not suitable to measure patella height after total knee arthroplasty (TKA). One of us (JC) modified the original Caton Deschamps (oCD), index with a new relative index called modified Caton Deschamps (mCD) index, by using new landmarks. The purpose of this study was to determine how patella height is modified after TKA.Material and Method: Sixty primary TKAs were consecutively prospectively enrolled. One type of implant was used (cementless postero-stabilized TKA, rotating plateau, cemented patella resurfacing). Patient's characteristics, functional and radiological outcomes were recorded pre-operatively and at one year follow-up. Pre-operative and post-operative outcomes were compared by paired t-test. Post-operative outcomes were compared between groups by one-way analysis of variance.Results: Average difference between pre and post-operative mCD was 0.19 in this series. In 81.7% of cases, patella was lowered. Patients were classified in three groups according to patella height lowering. Between these three groups, no significant statistical differences (IKS score knee and function, range of motion) could be identified.Discussion: In TKA, patella assessment in sagittal plane is as important as frontal or horizontal planes. True patella infera (TPI) is mostly due to patella tendon shortening measured by oCD. Pseudo patella infera (PPI) measured by mCD is mostly due to joint line elevation (over femoral cut with an over thickness of the tibial component). In this study a moderate patella lowering (minor than 15%) does not have a significant impact on the functional results (IKS, ROM) nevertheless in 80% patella is lowered. The next step will be to analyze precisely what factors are influencing this lowering and what prevention could be suggested in primary and revision TKA. [ABSTRACT FROM AUTHOR]

Purpose: Mid- and long-term follow-up of Charnley total hip arthroplasty (THA) demonstrated good functional results with 85 % survivorship at 25-year follow-up. However, dislocation still remains an unsolved problem. Dislocation may occur throughout the patient's and implant's life. The aim of this study is to answer the question: does a dual mobility cup (DMC) decrease the dislocation risk? Methods: We report comparative results at ten years of follow-up of two groups of primary cemented Charnley-type THA, one with a standard polyethylene cup (group 1, n = 215) and the other one with a DMC (group 2, n = 105). Results: In group 1, 26 dislocations (12.9 %) occurred. In group 2 only one dislocation (0.9 %) occurred. This dislocation was successfully reduced by closed reduction, without any recurrence. This difference was statistically significant ( p = 0.0018). In group 1, the reason for revision was recurrent dislocation in 21 cases. Five patients were revised for other reasons. The global revision rate was 12.9 %. In group 2, two patients needed revision surgery for aseptic loosening. The global revision rate was 2.1 %. This difference was statistically significant ( p = 0.054). The goal was reached for the patients of group 2 who had more risks factors for dislocation (age, aetiology, American Society of Anesthesiologists and Devane scores) than those of group 1. Conclusions: When using a DMC, we observed a low rate of dislocation in primary THA (0.9 %). This surgical choice seems to be a safe and effective technique in Charnley-type THA, especially in a high-risk population. [ABSTRACT FROM AUTHOR]

Purpose: Recently, increased interest has developed for patellofemoral arthroplasty as treatment for isolated patellofemoral arthritis. However, there are very few reports of the experience with the modern generation of patellofemoral arthroplasties. The new patellofemoral arthroplasty Hermes design is described. The design and technique of insertion are detailed.Methods: The indications were isolated patellofemoral disease with advanced arthritic damage. Ten-year followup is available for treatment of 70 knees. Postoperative radiographs of patients were assessed for Oxford deterioration and maltracking of the patella. Tracking was categorised as follows: normal tracking, patellar subluxation, patellar dislocation.Results: There were no late complications attributable to the arthroplasty. Disease progression in the tibiofemoral joint occurred in five patients requiring revision in three of these patients. Persistent anterior knee pain was recorded in four knees. The long-term results using this new design were better than those in the literature that described earlier designs, especially concerning malalignment. Only four knees in four patients had slight lateral patellar subluxation.Conclusions: This implant offers a reasonable alternative to total knee replacement in patients with isolated patellofemoral disease. [ABSTRACT FROM AUTHOR]

Purpose: Recently, increased interest has developed for patellofemoral arthroplasty as treatment for isolated patellofemoral arthritis. However, there are very few reports of the experience with the modern generation of patellofemoral arthroplasties. The new patellofemoral arthroplasty Hermes design is described. The design and technique of insertion are detailed. Methods: The indications were isolated patellofemoral disease with advanced arthritic damage. Ten-year followup is available for treatment of 70 knees. Postoperative radiographs of patients were assessed for Oxford deterioration and maltracking of the patella. Tracking was categorised as follows: normal tracking, patellar subluxation, patellar dislocation. Results: There were no late complications attributable to the arthroplasty. Disease progression in the tibiofemoral joint occurred in five patients requiring revision in three of these patients. Persistent anterior knee pain was recorded in four knees. The long-term results using this new design were better than those in the literature that described earlier designs, especially concerning malalignment. Only four knees in four patients had slight lateral patellar subluxation. Conclusions: This implant offers a reasonable alternative to total knee replacement in patients with isolated patellofemoral disease. [ABSTRACT FROM AUTHOR]

Background: Since 1962, the low friction arthroplasty (LFA) developed by Sir John Charnley has spread widely throughout the world. Many series have reported long-term results. Polyethylene (PE) wear is well known. The average wear ratio is about 0.1 mm a year. Many factors may influence that wear process. Purpose: The authors describe two different series of patients operated upon with Charnley's total hip arthroplasty (THA) using the original cemented stem and a non modular 22.2-mm head, with a cemented full polyethylene acetabular socket. Outcomes confirm excellent patient function after 25 years. They emphasise the fact that PE is the weak point of total hip arthroplasty. Function may be excellent even though PE wear is significant. In several cases, no wear at the maximum follow-up was detectable. Results: This study confirms different publications relating long-term follow-up with LFA. During a Charnley meeting in Lyon, we published a survival curve of 85% after 25 years. Berry et al. published a 86.5% survival curve (J Bone Joint Surg Am 84:171-177, 2002). In 1995, Luc and Marcel Kerboul published a 77% survival rate after 20 years in young patients under 40 years old at the time of the surgery. In 2009, Callaghan et al. published a series of 35 years follow-up with a ratio of 78% survivorship (J Bone Joint Surg Br 91:2617-2621). Conclusion: Could the long-term results be improved? Through recent decades, many solutions have been introduced to improve the survivorship of THA including bearing surfaces such as alumina-on-alumina and metal-on-metal. Different problems have occurred with these solutions. LFA might be improved by working on the nature and the quality of the head. Improvements might also be obtained by working on the quality and the hardness of the acetabular socket. [ABSTRACT FROM AUTHOR]

Patella infera described by Caton et al.The measurement is made in 1982 is an accompanying symptom in certain knee affections secondary to the abnormal situation of the patella. The measurement is made on the X-ray with sagittal view after measuring the patellar height, using the original technique described by the author, when the ratio between the articular surface of the patella and the distance form the patellar tip to the tibial tubercle. Indications of surgery may be when this ration is inferior or equals 0.6. The origin of the patella infera can be mechanical or inflammatory. The operative technique addresses the etiology. In current practice, the patellar height and the patellar tendon length may be evaluated using a sagittal section MRI. In the authors’ experience, when the Caton ratio is lower or equals 0.6 and when the length of the patellar tendon is over 25 mm, the indication of surgery includes proximal transfer of the tibial tubercle. If the length of the patellar tendon is less than 25 mm, it is often necessary to perform a patellar tendon lengthening (PTL). This type of surgery is contraindicated in the authors’ experience in depressive or pusillanimous subjects. The two surgical techniques are described. Both techniques use an anterior and medial approach. The proximal transfer of the tibial tubercle (PTT) includes medial and lateral retinaculum release. The tibial tubercle is detached and transferred upwards according to the pre-operative planning generally 1 or 2 cm and is fixed with 2 screws. PTL includes a medial and lateral retinaculum release often with the fat pad. The patellar tendon is dissociated in the middle over its whole length, and the medial pad is detached of the tibial tubercle and the lateral of the patella. After lengthening, the edges of the tendon are sutured, and this suturing reinforced. Alternative procedures may be used when PTT or PTL are not possible, using transplantation with an allograft of the extensor system or a plasty with hamstring muscles. [ABSTRACT FROM AUTHOR]

The aim of this study was to present the different surgical procedures of tibial tubercle osteotomies for patellar instability or patellar mispositioning such as patella alta or patella infera. This study analysed the Caton-Deschamps index used for assessment of vertical patella height in order to make a precise plan for tibial tuberosity osteotomies. This study included 61 knees (50 patients) treated for patellar instability with patella alta and 24 patients treated for patella infera of mechanical origin. The results of medial transfer of the tibial tuberosity, with or without distal transfer in cases of patellar instability with patella alta, gives excellent results for stability in 76.8% of the cases. The results of the proximal transfer of the tibial tuberosity in cases of patella infera were excellent or good in 80% of the cases in our series of 24 patients. A precise preoperative plan is needed with determination of the vertical patellar height using the Caton-Deschamps index and the situation of the tibial tuberosity and the Tibial Tubercle to Trochlear Groove distance (TT-TG) of the knee on CT scan in order to obtain satisfactory results. [ABSTRACT FROM AUTHOR]

We reviewed the results of 17 consecutive revision total hip arthroplasties performed with the use of freeze-dried irradiated bone allograft in 15 patients. These allografts were used in conjunction with five Kerboull rings, two steel meshes and ten cemented isolated cups. All the patients have had a follow-up of at least 5 years. The patients were evaluated clinically and radiographically. No revisions were necessary and X-rays confirmed partial or total ingrowth of the allografts. In acetabular revision surgery, hip reconstruction can be successfully treated by freeze-dried irradiated and chemically treated allografts. Additional studies with longer term follow-up are necessary to confirm this outcome. [ABSTRACT FROM AUTHOR]

Artificial intelligence and robots like us (surgeons) for people like you (patients): toward a new human-robot-surgery shared experience. This application of AI is not limited to vision but also can increase acoustic interpretations [[27]] during surgery, not only during arthroplasty as explained by Homma et al. [[28]] but also for spine surgery [[20]]. The recent introduction of artificial intelligence in orthopaedic surgery Contrary to the introduction of robotics in surgery, the introduction of AI in orthopaedic surgery if we exclude robots is recent (less than 5 years). If knee and hip surgery were the first surgeries to benefit of robotic technology [[29]] Hand surgery [[30]] and pediatrics [[31]] are two different topics with possible future benefits of robotic surgery. [Extracted from the article]

Purpose: Templating is the first step in achieving a successful total hip arthroplasty. We hypothesize that native head size is highly correlated with implanted cup size. Therefore, the purpose of this study is to look for a correlation between sizes of the intra-operative measurement of the femoral head and the implanted cup. Methods: This is a monocentric observational study conducted from December 2018 till January 2023. All patients admitted for a primary total hip arthroplasty were included and retrospectively reviewed. Intra-operative femoral head measurement, radiographic femoral head diameter, templated (planned) cup size, and definitive implanted cup size were recorded. Results: The sample included 154 patients (85 female and 69 males) with a mean age of 66.2 ± 10.4 years. There were 157 THA cases; 82 on the right side and 75 on the left side. The native head size and acetate template on digital radiographs were the most significantly positively correlated with cup size (P < 0.0001) while the radiological head size was significantly negatively correlated with cup size (P = 0.009). The implanted cup was on average 2 ± 2 mm bigger than the native head size measured intra-operatively. Conclusion: The native femoral head diameter measured intra-operatively is a simple and reliable tool to help the surgeons choose the proper size of the acetabular cup, preventing complications during surgery hence optimizing results post operatively. This technique would contribute to a more ecofriendly orthopaedic reconstructive surgery. [ABSTRACT FROM AUTHOR]

Introduction: Low friction arthroplasty (LFA) introduced by Sir John Charnley was the gold standard for many years. Dislocation and infection are the first causes for early revision. Late failures are polyethylene (PE) wear and loosening. Due to dislocation risk we slowly switched to the use of LFA with dual mobility cups (DMC). The purposes of this study are (1) to assess whether our changes have improved outcomes and (2) what is the new gold standard?Material and Methods: We selected from an observational registry of 1,091 cases of hybrid Charnley total hip arthroplasty (THA). The acetabular component was either DMC in 455 cases or fixed cup (FC) in 636 cases.Results: Three dislocations (0.6%) occurred in the DMC group (none revised). In the FC group 54 dislocated (8.49%) and 20 were recurrent and underwent revision (revision rate 3.14%). In the DMC group, five acetabular and three femoral revisions were performed (revision rate for loosening 1.7%). In the FC group 19 cases underwent acetabular revision, and five cases had femoral component revised (revision rate for loosening 3.7%).Discussion: Charnley's LFA has proven over 50 years of excellent survivorship. To decrease dislocation risk, one suggested increasing femoral head diameter. Gilles Bousquet proposed another way, namely, the DMC concept. Dislocation is no longer a critical issue with DMC as demonstrated in our series and main series. DMC in primary THA is still a subject of debate. Mid-term results do not demonstrate a higher rate of wear than LFA. What is the current gold standard? LFA was and is our current gold standard in association with a DMC. [ABSTRACT FROM AUTHOR]

Introduction: Using a cementless fixation for total knee arthroplasty (TKA) is controversial. We hypothesized that cementless tibial base plate with a monoblock long stem (MLS) would provide secure tibial alignment and stable fixation when bone conditions were considered as poor for a cementless fixation. The purpose of this study was to compare the mean eight year survivorship of cementless standard keels (SK) vs cementless MLS.Material Methods: We report a matched series of 98 cases of SK and 98 cases of MLS in patients with poor bone conditions. The two cohorts were statistically compared. Revision for tibial loosening was used as the endpoint in the survivorship analysis.Results: We recorded two cases of tibial loosening and three cases of bipolar loosening in the SK group (0% MLS vs 5% SK). No tibial loosening occurred in the MLS group (statistically significant). No tibial periprosthetic or intra-operative fractures occurred in either group. The survivorship at eight years of follow-up was 95.6% in the SS cohort vs 100% in the MLS cohort using revision for tibial loosening as the endpoint.Discussion: This study was not randomized. Its strength was that it took into account the comparative midterm outcomes of a matched cohort of patients implanted with two types of cementless components in the same bone conditions. We did not record any tibial loosening in the MLS group. Using long stems has been criticized but we did not observe any adverse reactions and no intra-operative tibial fracture occurred.Conclusion: MLS improves the alignment and fixation of cementless TKA. This is a safe solution when bone conditions are poor or modified by previous surgery. [ABSTRACT FROM AUTHOR]

An editorial about innovations in total hip arthroplasty is presented. The authors trace the history of total hip arthroplasty. They consider the satisfactory clinical outcome of several all-polyethylene sockets following more than 20 years in vivo. They mention some complications associated with total hip replacment.

A correction to the article "Design, operative technique and ten-year results of the Hermes™ patellofemoral arthroplasty" that was published in a previous issue is presented.

Purpose: We report clinical and radiological outcome of a dual mobility cup (DMC) of 2nd generation after a minimum of ten year-follow-up (FU). The goal of this work was to compare the results of this DMC in patients aged less than 55 years and in patients aged more than 55 years.Methods: From 2000 to 2005, a prospective and consecutive series of 119 THAs with a cementless DMC of 2nd generation (GIROS) were performed in patients aged less than 55 years and 444 in patients aged more than 55 years.Results: The mean FU was 11 years (8 to 15 years). Survivorships (failure of both components or cup loosening) were not different between patients aged less than 55 years and patients aged more than 55 years. There was no dislocation. DEVANE classification, Harris, PMA and Oxford scores improved after THA but no difference could be found between between < 55 years and > 55 years patients.Conclusion: These results are better than those of first generation (BOUSQUET) DMC (77 % of survival rate at 20 years of FU). These results are in the same agreement than those of the literature: 99 % of survival rate at 14.2 years of FU for KERBOULL with a low friction arthroplasty and 96.5 % at ten years of FU for ceramic/ceramic bearing (R CHANA). The DMC for young patient is a relevant surgical option with no dislocation and excellent clinical results and survival rate at more than ten years of FU. [ABSTRACT FROM AUTHOR]

Purpose: Osteolysis in total hip arthroplasty (THA) depends on polyethylene wear and dictates the survival of the prosthesis. Dual mobility in THAs, which is claimed to reduce dislocation risk, has very good long-term clinical results. However, little is known about how the liner wears in this design, compared to the standard single mobility model.Methods: A comparative study looking at wear of a conventional ultra-high-molecular-weight polyethylene liner, using gravimetric measurement, between dual mobility implants and standard implants, was performed on a simulator in accordance with a normed protocol based on the same dimensions, environmental conditions and stresses. A linear regression test was employed.Results: Under the same conditions (loading, cycles, sterilization, material and surface roughness), the gravimetric wear (for conventional polyethylene) is comparable between a standard and a dual mobility cup. This correlates to ten year follow-up results of dual mobility cup.Discussion- Conclusion: This in vitro equivalent wear serves to confirm the very good long-term clinical results observed with dual mobility bearing, whose use should not be restricted by concerns about increased polyethylene wear. [ABSTRACT FROM AUTHOR]

Introduction: The dual-mobility cup (DMC) was introduced in 1979. Due to lack of referenced publications, this interesting and innovating concept was ignored during close to 20 years. However, 180 studies (level III or IV) have now been published. Evidence-based medicine is based on level I studies. Over the past three decades, the role of national registries developed with the intention of surveying orthopaedic implants. In 2012, we developed, registered, and implemented a specific database for contemporary DMC.Material and Methods: Data are collected with an electronic case-report form, and this evaluation is limited to a single product line . From May 2012 to December 2016, 2090 cases of Quattro cup implantation have been registered; results of the first 636 primary cases with a minimum follow-up of three years were previously reported (series 1). Of the 1454 remaining cases, dislocation rate only was monitored (series 2) and results are reported here.Results: In series1 comprising 553 degenerative diseases and 83 proximal femoral fractures (PFF), one dislocation (1.2%) occurred in PFF and none in degenerative disease. Survivorship (infection excluded) at three years was 99.8%. In series 2 (1315 degenerative diseases; 139 PFFs), dislocation rate was 0.27% (four cases). In neither series did we observe any intraprosthetic dislocation.Discussion: Results of this private regional register confirm the high efficiency of DMC to decrease dislocation rate (0.23%). Few outcomes of DMC in primary total hip arthroplasty (THA) are published in national registries. The Swedish Hip Arthroplasty Register has reported on 287 primary DMC hips of 78,098 THAs. No dislocations were reported. We conclude that DMC decreases dislocation rate, and the national registry of Lithuania also reports a significant decrease in the rate of revision for dislocation in the DMC group. These data-available online-allow us to monitor DMC in real time, although they lack short-term follow-up. [ABSTRACT FROM AUTHOR]

Background: The use of dual mobility cups (DMC) has been shown to reduce hip instability after revision surgery. For severe acetabular bone loss, reconstruction with a Kerboull cross-plate and bone allograft would contribute to restoring native hip position and bone stock. Only two papers reported on the combination of Kerboull cross-plate with bone allograft and cemented DMC in revision total hip arthroplasty (THA).Methods: This is a monocentric retrospective study (28 cases) of first-time revision THA using such a construct in American Association of Orthopaedic Surgeons (AAOS) grade III and IV acetabular bone defect. Detailed demographic, clinical and radiographic results were recorded and evaluated.Results: With a mean follow-up of six ± 3.63 years, no case of instability was reported. The modified Harris Hip Score (mHHS) was 88.4 ± 10.1. No hook fracture or mechanical failure was observed. Non-progressive radiolucent lines were recorded. Osteointegration of the allografts was observed in all cases with a mean Grodet score of 7.9 ± 0.97.Conclusions: In first revision THA, the use of a Kerboull cross-plate with allograft and a cemented DMC in AAOS grade III and IV acetabular bone defects demonstrated excellent clinical and radiological outcomes with no recorded cases of dislocation or mechanical failure. [ABSTRACT FROM AUTHOR]

The aim of this study was to present the different surgical procedures of tibial tubercle osteotomies for patellar instability or patellar mispositioning such as patella alta or patella infera. This study analysed the Caton-Deschamps index used for assessment of vertical patella height in order to make a precise plan for tibial tuberosity osteotomies. This study included 61 knees (50 patients) treated for patellar instability with patella alta and 24 patients treated for patella infera of mechanical origin. The results of medial transfer of the tibial tuberosity, with or without distal transfer in cases of patellar instability with patella alta, gives excellent results for stability in 76.8% of the cases. The results of the proximal transfer of the tibial tuberosity in cases of patella infera were excellent or good in 80% of the cases in our series of 24 patients. A precise preoperative plan is needed with determination of the vertical patellar height using the Caton-Deschamps index and the situation of the tibial tuberosity and the Tibial Tubercle to Trochlear Groove distance (TT-TG) of the knee on CT scan in order to obtain satisfactory results. [ABSTRACT FROM AUTHOR]

Introduction: Dual-mobility cups (DMC) are gaining popularity mainly for their reduced rate of dislocation following total hip arthroplasty (THA). Currently, indication for DMC use extends beyond patients with high risk of dislocation or revision THA cases. Many authors reported DMC outcomes in primary THA for all aetiologies. However, some reports claimed that the use of DMC is accompanied with higher rates of infection compared with conventional cups (CC) in both primary and revision THA. Research question: Does the use of DMC generate higher rates of infection when compared with conventional cups? Objectives: The aim of this meta-analysis was to look for significant difference in the rate of post-operative infection between DMC cups and conventional cups. Methodology: MEDLINE, Embase, Scopus, Web of Science, Cochrane Library, and Google Scholar were searched since inception. Only studies with comparative design reporting the outcome infection rate were included. Results: Seventeen retrospective comparative studies were located comprising 248,541 patients: 16,020 in the DMC group and 232,521 in the CC group. The mean follow-up period was 37.5 ± 42 and 50.2 ± 48.7 months for the DMC and CC groups, respectively. The meta-analytical results indicated the following: (a) significantly lesser infections following DMC compared with CC in revision THA (odds ratio (OR) = 0.75 (95% CI = 0.653 to 0.874, P = 0.0002, I2 = 25%); (b) for primary THA and for large-sampled registries, significance was found using only the fixed-effects model estimate; and (c) no significant difference was found for the subgroup of cohort studies. Conclusion: Our results clearly refute the claim that DMC would yield higher rates of infection. On the contrary, the findings demonstrated that the use of DMC reduces the risk of post-operative infection in revision THA and a similar lower infection trend for primary THA when compared with the standard cups. [ABSTRACT FROM AUTHOR]

Purpose: The objective was to identify predictive factors for intraprosthetic dislocation (IPD) and to understand how improvements in dual mobility cups (DMC) have helped to reduce dramatically the occurrence of this complication.Methods: DM mobile inserts retrieved from 93 hips were divided into three groups: first-generation DMC with IPD ("firstDMC-IPD"), first-generation DMC with over 15 years of implantation without IPD ("firstDMC-noIPD"), and latest-generation DMC ("newDMC"). The predictive factors for IPD based on clinical, prosthetic, radiological and intraoperative characteristics were analysed by multivariate analysis. The surface of each retrieved mobile insert was analysed using three-dimensional CT scan in order to compare their rim wear.Results: Three predictive factors for IPD were found: a high BMI, a wide rough stem neck and a large cup size. Wear of the firstDMC-noIPD inserts was significantly less than those of firstDMC-IPD inserts and significantly more than those of newDMC inserts. For the firstDMC-IPD inserts, the rim's outer surface wear was significantly greater than the rim's inner surface wear.Conclusions: IPD is a specific complication related to wear of the DM mobile insert due to failure of the liner's retaining rim, especially from the rim's outer surface. This long-term issue is different to the early traumatic complication, which can happen after an attempt at closed reduction of a DM THA dislocation. Recent modifications in the design and the coating of contemporary DMC and femoral stems, as well as improvements in the mobile insert itself, seem to corroborate our assumptions about the IPD mechanism and contribute to the quasi-disappearance of this complication. [ABSTRACT FROM AUTHOR]

Purpose: Instability following total hip arthroplasty remains a common and disabling complication. The dual mobility cup (DMC) allows a reduction in the dislocation rate. An increasing number of studies have been undertaken to better understand DMC long term outcomes and complications. The goal of this systematic review was to clarify its different uses and outcomes according to the indications.Methods: A comprehensive literature review was performed using the keywords 'dual mobility' and 'tripolar cup' with no limit regarding the year of publication. One hundred seventy six publications were identified.Results: Current literature shows that "contemporary" dual mobility cup are a significant indication to manage instability following primary and revision hip arthroplasty. Survivorship at midterm is comparable to other articulations for primary THA, but is more difficult to evaluate in revision. Intra-prosthetic dislocation, wear, and loosening are now uncommon with new generations of DMC.Conclusions: Compared to previous generations of DMC, the current "contemporary" DMC presents a significant improvement. Current literature reveals a tendency to increase the indications but further studies with long term follow up remain important to consolidate these findings. [ABSTRACT FROM AUTHOR]

Purpose: Dislocation is a frequent complication in total hip arthroplasty (THA) revision. Cup fixation is the second concern. In order to know outcomes at two years, we prospectively followed a continuous series of 78 patients to demonstrate that cementless dual-mobility cup (DMC) used in revision THA is safe as regards dislocation risk and bone fixation. Method: We enrolled 78 consecutive patients (79 cases) in a prospective study. Mean interval between index surgery and revision was 12.9 years. Mean age at revision was 75.5 years. Two types of cementless DMC were used: a standard DMC in 68 cases with low-grade bone defect (Paprosky grade 1 and 2), and a specific design reconstruction DMC in 11 cases with severe bone loss (Paprosky grade 3). Results: At two years of follow-up, 68 patients were reviewed; four were lost to follow-up., and six patients were deceased. We identified three types of situations at risk:standard risk (33 cases), Paprosky grade 1 or 2; medium risk (37 cases), revision for recurrent instability (21), periprosthetic fractures (14) or severe loosening Paprosky grade 3 without femorotomy (2); high risk (nine cases), revision for severe loosening with a femorotomy. One (1.3 %) patient dislocated her hip at one month without recurrence. Revision rate for dislocation was 0 %; two (2.7 %) early mechanical failures occurred. Conclusion: Considering outcomes of this series, cementless DMC can be suggested in THA revision surgery. [ABSTRACT FROM AUTHOR]

The published online version contains mistake in the author list for the author name "Di Iorio Alexandre" was incorrectly presented. [ABSTRACT FROM AUTHOR]