Search

Particle-induced damage on perpendicular recording media can be categorized as physical damage to the media and magnetic erasures with limited physical damage. Component-level tests were developed in order to measure particle robustness of air bearing designs for these two failure modes. A published model for air bearing interactions with a particle was extended to include the full slider surface and allow particles to slide along the slider air bearing features. The model and test results correlate for hard particle scratching. Specific air bearing features and properties can be modified in order to improve dramatically the air bearing particle robustness for hard particle scratches and particle-induced magnetic erasures. [ABSTRACT FROM AUTHOR]

Particle-induced damage on perpendicular recording media can be categorized as physical damage to the media and magnetic erasures with limited physical damage. Component-level tests were developed in order to measure particle robustness of air bearing designs for these two failure modes. A published model for air bearing interactions with a particle was extended to include the full slider surface and allow particles to slide along the slider air bearing features. The model and test results correlate for hard particle scratching. Specific air bearing features and properties can be modified in order to improve dramatically the air bearing particle robustness for hard particle scratches and particle-induced magnetic erasures. [ABSTRACT FROM AUTHOR]

One detrimental by-product of heat-assisted magnetic recording writing is the creation of head contamination. Here, we present the current understanding of the driving forces, growth mechanisms, and growth rates of write-induced head contamination. The combination of an evaporation and condensation model with shear forces suggests a flow of lubricant on the head may precipitate contamination. The contamination is observed to grow in the head–media gap until it contacts the media surface, at which point an additional material pickup mechanism can be activated. Evidence of contact-induced transfer and a chemical reaction of the contamination is presented, and the impacts of contamination on head temperatures and thermal gradient is presented. Depending on the contamination properties, head temperatures may be increased substantially, leading to increased reliability risk. Consistent with previous analyses, we find that contamination may increase media thermal gradient. [ABSTRACT FROM AUTHOR]

Lubricant accumulation was found on the media surface the instant when the laser is turned OFF during heat-assisted magnetic recording write operations. By changing the write cycles, laser ON/OFF duration, media, and head temperatures, we find that this lubricant accumulation is related to the change in head–media temperatures. The observed lubricant deposition process is restricted to a short time window (1– 2~\mu \texts ) after the laser is turned OFF. An equilibrium model of thermal displacement due to evaporation and condensation processes is presented and used to discuss the effect of the head–media temperature changes on the lubricant accumulation. Possible solutions to minimize the lubricant transfer and deposition are discussed. [ABSTRACT FROM AUTHOR]

Heat-assisted magnetic recording involves the transfer of energy to the recording medium via optical means. To enable high areal density, the recorded track must be smaller than the diffraction limit of focused light, which is accomplished by using a near-field transducer (NFT) with a corner or peg with small dimension. Energy transfer using such a transducer is a near-field effect, and therefore is highly sensitive to the spacing between the NFT and the medium. Since the recording medium has some surface roughness, there will be a variation in the NFT-to-medium spacing and this will impact the amount of energy transferred from the NFT. We model the effect of Gaussian surface roughness on NFT energy transfer and predict surface temperature variations for a rough surface. In addition, we illustrate how changing the head-medium spacing changes the impact that roughness has on surface temperature variation. We combine these modeled predictions with spinstand measurements of recorded data and conclude that the effect of media roughness results in only limited temperature excursions above the nominal recording medium temperature. [ABSTRACT FROM PUBLISHER]