Search

According to the modular hypothesis for the control of movement, muscles are recruited in synergies, which capture muscle coordination in space, time, or both. In the last two decades, muscle synergy analysis has become a well-established framework in the motor control field and for the characterization of motor impairments in neurological patients. Altered modular control during a locomotion task has been often proposed as a potential quantitative metric for characterizing pathological conditions. Therefore, the purpose of this systematic review is to analyze the recent literature that used a muscle synergy analysis of neurological patients' locomotion as an indicator of motor rehabilitation therapy effectiveness, encompassing the key methodological elements to date. Searches for the relevant literature were made in Web of Science, PubMed, and Scopus. Most of the 15 full-text articles which were retrieved and included in this review identified an effect of the rehabilitation intervention on muscle synergies. However, the used experimental and methodological approaches varied across studies. Despite the scarcity of studies that investigated the effect of rehabilitation on muscle synergies, this review supports the utility of muscle synergies as a marker of the effectiveness of rehabilitative therapy and highlights the challenges and open issues that future works need to address to introduce the muscle synergies in the clinical practice and decisional process. [ABSTRACT FROM AUTHOR]

The central nervous system (CNS) may produce the same endpoint trajectory or torque profile with different muscle activation patterns. What differentiates these patterns is the presence of cocontraction, which does not contribute to effective torque generation but allows to modulate joints' mechanical stiffness. Although it has been suggested that the generation of force and the modulation of stiffness rely on separate pathways, a characterization of the differences between the synaptic inputs to motor neurons (MNs) underlying these tasks is still missing. In this study, participants coactivated the same pair of upper-limb muscles, i.e., the biceps brachii and the triceps brachii, to perform two functionally different tasks: limb stiffness modulation or endpoint force generation. Spike trains of MNs were identified through decomposition of high-density electromyograms (EMGs) collected from the two muscles. Cross-correlogram showed a higher synchronization between MNs recruited to modulate stiffness, whereas cross-muscle coherence analysis revealed peaks in the β-band, which is commonly ascribed to a cortical origin. These peaks did not appear during the coactivation for force generation, thus suggesting separate cortical inputs for stiffness modulation. Moreover, a within-muscle coherence analysis identified two subsets of MNs that were selectively recruited to generate force or regulate stiffness. This study is the first to highlight different characteristics, and probable different neural origins, of the synaptic inputs driving a pair of muscles under different functional conditions. We suggest that stiffness modulation is driven by cortical inputs that project to a separate set of MNs, supporting the existence of a separate pathway underlying the control of stiffness. NEW & NOTEWORTHY: The characterization of the pathways underlying force generation or stiffness modulation are still unknown. In this study, we demonstrated that the common input to motor neurons of antagonist muscles shows a high-frequency component when muscles are coactivated to modulate stiffness but not to generate force. Our results provide novel insights on the neural strategies for the recruitment of multiple muscles by identifying specific spectral characteristics of the synaptic inputs underlying functionally different tasks. [ABSTRACT FROM AUTHOR]

Observing the actions of others triggers, in our brain, an internal and automatic simulation of its unfolding in time. Here, we investigated whether the instantaneous internal representation of an observed action is modulated by the point of view under which an action is observed and the stimulus type. To this end, we motion captured the elliptical arm movement of a human actor and used these trajectories to animate a photorealistic avatar, a point-light stimulus or a single dot rendered either from an egocentric or an allocentric point of view. Crucially, the underlying physical characteristics of the movement were the same in all conditions. In a representational momentum paradigm, we then asked subjects to report the perceived last position of an observed movement at the moment in which the stimulus was randomly stopped. In all conditions, subjects tended to misremember the last configuration of the observed stimulus as being further forward than the veridical last showed position. This misrepresentation was however significantly smaller for full-body stimuli compared to point-light and single dot displays and it was not modulated by the point of view. It was also smaller when first-person full body stimuli were compared with a stimulus consisting of a solid shape moving with the same physical motion. We interpret these findings as evidence that full-body stimuli elicit a simulation process that is closer to the instantaneous veridical configuration of the observed movements while impoverished displays (both point-light and single-dot) elicit a prediction that is further forward in time. This simulation process seems to be independent from the point of view under which the actions are observed. [ABSTRACT FROM AUTHOR]

Estimation of the force exerted by muscles from their electromyographic (EMG) activity may be useful to control robotic devices. Approximating end-point forces as a linear combination of the activities of multiple muscles acting on a limb may lead to an inaccurate estimation because of the dependency between the EMG signals, i.e., multi-collinearity. This study compared the EMG-to-force mapping estimation performed with standard multiple linear regression and with three other algorithms designed to reduce different sources of the detrimental effects of multi-collinearity: Ridge Regression, which performs an L2 regularization through a penalty term; linear regression with constraints from foreknown anatomical boundaries, derived from a musculoskeletal model; linear regression of a reduced number of muscular degrees of freedom through the identification of muscle synergies. Two datasets, both collected during the exertion of submaximal isometric forces along multiple directions with the upper limb, were exploited. One included data collected across five sessions and the other during the simultaneous exertion of force and generation of different levels of co-contraction. The accuracy and consistency of the EMG-to-force mappings were assessed to determine the strengths and drawbacks of each algorithm. When applied to multiple sessions, Ridge Regression achieved higher accuracy (R2 = 0.70) but estimations based on muscle synergies were more consistent (differences between the pulling vectors of mappings extracted from different sessions: 67%). In contrast, the implementation of anatomical constraints was the best solution, both in terms of consistency (R2 = 0.64) and accuracy (74%), in the case of different co-contraction conditions. These results may be used for the selection of the mapping between EMG and force to be implemented in myoelectrically controlled robotic devices. [ABSTRACT FROM AUTHOR]

In recent years, different groups have developed algorithms to control the stiffness of a robotic device through the electromyographic activity collected from a human operator. However, the approaches proposed so far require an initial calibration, have a complex subject-specific muscle model, or consider the activity of only a few pairs of antagonist muscles. This study described and tested an approach based on a biomechanical model to estimate the limb stiffness of a multi-joint, multi-muscle system from muscle activations. The "virtual stiffness" method approximates the generated stiffness as the stiffness due to the component of the muscle-activation vector that does not generate any endpoint force. Such a component is calculated by projecting the vector of muscle activations, estimated from the electromyographic signals, onto the null space of the linear mapping of muscle activations onto the endpoint force. The proposed method was tested by using an upper-limb model made of two joints and six Hill-type muscles and data collected during an isometric force-generation task performed with the upper limb. The null-space projection of the muscle-activation vector approximated the major axis of the stiffness ellipse or ellipsoid. The model provides a good approximation of the voluntary stiffening performed by participants that could be directly implemented in wearable myoelectric controlled devices that estimate, in real-time, the endpoint forces, or endpoint movement, from the mapping between muscle activation and force, without any additional calibrations. [ABSTRACT FROM AUTHOR]

Humans have a remarkable capacity to learn new motor skills, a process that requires novel muscle activity patterns. Muscle synergies may simplify the generation of muscle patterns through the selection of a small number of synergy combinations. Learning of new motor skills may then be achieved by acquiring novel muscle synergies. In a previous study, we used myoelectric control to construct virtual surgeries that altered the mapping from muscle activity to cursor movements. After compatible virtual surgeries, which could be compensated by recombining subject-specific muscle synergies, participants adapted quickly. In contrast, after incompatible virtual surgeries, which could not be compensated by recombining existing synergies, participants explored new muscle patterns but failed to adapt. Here, we tested whether task space exploration can promote learning of novel muscle synergies required to overcome an incompatible surgery. Participants performed the same reaching task as in our previous study but with more time to complete each trial, thus allowing for exploration. We found an improvement in trial success after incompatible virtual surgeries. Remarkably, improvements in movement direction accuracy after incompatible surgeries occurred faster for corrective movements than for the initial movement, suggesting that learning of new synergies is more effective when used for feedback control. Moreover, reaction time was significantly higher after incompatible than compatible virtual surgeries, suggesting an increased use of an explicit adaptive strategy to overcome incompatible surgeries. Taken together, these results indicate that exploration is important for skill learning and suggest that human participants, with sufficient time, can learn new muscle synergies. NEW & NOTEWORTHY Motor skill learning requires the acquisition of novel muscle patterns, a slow adaptive process. Here we show that learning to control a cursor after an incompatible virtual surgery, a complex skill requiring new muscle synergies, is possible when enough time for task space exploration is provided. Our results suggest that learning new synergies is related to the exceptional human capacity to acquire a wide variety of novel motor skills with practice. [ABSTRACT FROM AUTHOR]

Purpose: Different motor units (MUs) in the biceps brachii (BB) muscle have been shown to be preferentially recruited during either elbow flexion or supination. Whether these different units reside within different regions is an open issue. In this study, we tested wheter MUs recruited during submaximal isometric tasks of elbow flexion and supination for two contraction levels and with the wrist fixed at two different angles are spatially localized in different BB portions.Methods: The MUs' firing instants were extracted by decomposing high-density surface electromyograms (EMG), detected from the BB muscle of 12 subjects with a grid of electrodes (4 rows along the BB longitudinal axis, 16 columns medio-laterally). The firing instants were then used to trigger and average single-differential EMGs. The average rectified value was computed separately for each signal and the maximal value along each column in the grid was retained. The center of mass, defined as the weighted mean of the maximal, average rectified value across columns, was then consdiered to assess the medio-lateral changes in the MU surface representation between conditions.Results: Contraction level, but neither wrist position nor force direction (flexion vs. supination), affected the spatial distribution of BB MUs. In particular, higher forces were associated with the recruitment of BB MUs whose action potentials were represented more medially.Conclusion: Although the action potentials of BB MUs were represented locally across the muscle medio-lateral region, dicrimination between elbow flexion or supination seems unlikely from the surface representation of MUs action potentials. [ABSTRACT FROM AUTHOR]

BACKGROUND: Ultrasound-guided galvanic electrolysis technique (USGET) is an innovative mini-invasive intervention with the potential to optimise outcomes in the treatment of Achille's tendinopathy (AT). OBJECTIVE: The aim of this pilot study is to evaluate the efficacy of adding USGET to conventional eccentric exercise treatment in patients with chronic AT. METHODS: Inclusion criteria were patients with unilateral non-insertional AT, pain lasting > 3 months, aged 25–60 years. Patients were randomised in two groups receiving the same physiotherapy treatment (2 sessions per week for 8 weeks). In addition, the experimental group received three USGET stimulations, one every 15 days. Outcome measures were assessment of Achilles tendinopathy severity using the Victorian Institute of Sport Assessment-Achilles (VISA-A) and pain intensity using the Visual Analogue Scale (VAS). Assessment points occurred at the onset of treatment (T0), its conclusion (T1), and subsequent follow-ups at one (T2) and two months (T3). RESULTS: Out of the 52 patients who met the study inclusion criteria, two participants withdrew from the study, resulting in a total of 50 subjects who completed the research. None of the parameters showed a different distribution at T1 (p > 0.337). At T2, there was a statistical difference in VISA-A (p = 0.010) and its subscales and VAS (p = 0.002) in the USGET group. At T3, both groups improved with a statistical difference observed in VISA-A (p < 0.001) and its subscales Pain (p = 0.004), Function (p = 0.003) and Sport (p = 0.002), but the EG patients showed a greater improvement. No adverse events were reported. CONCLUSION: The effect of USGET combined with eccentric exercise appears to be a safe and effective technique for achieving pain relief and functional recovery in the medium term, supporting the integrated use of USGET as a rehabilitative treatment option for patients with chronic AT. [ABSTRACT FROM AUTHOR]

Manipulative actions involving unstable interactions with the environment require controlling mechanical impedance through muscle co-contraction. While much research has focused on how the central nervous system (CNS) selects the muscle patterns underlying a desired movement or end-point force, the coordination strategies used to achieve a desired end-point impedance have received considerably less attention. We recorded isometric forces at the hand and electromyographic (EMG) signals in subjects performing a reaching task with an external disturbance. In a virtual environment, subjects displaced a cursor by applying isometric forces and were instructed to reach targets in 20 spatial locations. The motion of the cursor was then perturbed by disturbances whose effects could be attenuated by increasing co-contraction. All subjects could voluntarily modulate co-contraction when disturbances of different magnitudes were applied. For most muscles, activation was modulated by target direction according to a cosine tuning function with an offset and an amplitude increasing with disturbance magnitude. Co-contraction was characterized by projecting the muscle activation vector onto the null space of the EMG-to-force mapping. Even in the baseline the magnitude of the null space projection was larger than the minimum magnitude required for non-negative muscle activations. Moreover, the increase in co-contraction was not obtained by scaling the baseline null space projection, scaling the difference between the null space projections in any block and the projection of the non-negative minimum-norm muscle vector, or scaling the difference between the null space projections in the perturbed blocks and the baseline null space projection. However, the null space projections in the perturbed blocks were obtained by linear combination of the baseline null space projection and the muscle activation used to increase co-contraction without generating any force. The failure of scaling rules in explaining voluntary modulation of arm co-contraction suggests that muscle pattern generation may be constrained by muscle synergies. [ABSTRACT FROM AUTHOR]

Assessing maximum voluntary bite force is important to characterize the functional state of the masticatory system. Due to several factors affecting the estimation of the maximum bite force, a unique solution combining desirable features such as reliability, accuracy, precision, usability, and comfort is not available. The aim of the present study was to develop a low-cost bite force measurement device allowing for subject-specific customization, comfortable bite force expression, and reliable force estimation over time. The device was realized using an inexpensive load cell, two 3D printed ergonomic forks hosting reusable subject-specific silicone molds, a read-out system based on a low-cost microcontroller, and a wireless link to a personal computer. A simple model was used to estimate bite force taking into account individual morphology and device placement in the mouth. Measurement reliability, accuracy, and precision were assessed on a calibration dataset. A validation procedure on healthy participants was performed to assess the repeatability of the measurements over multiple repetitions and sessions. A 2% precision and 2% accuracy were achieved on measurements of forces in the physiological range of adult bite forces. Multiple recordings on healthy participants demonstrated good repeatability (coefficient of variation 11%) with no significant effect of repetition and session. The novel device provides an affordable and reliable solution for assessing maximum bite force that can be easily used to perform clinical evaluations in single sessions or in longitudinal studies. [ABSTRACT FROM AUTHOR]

The redundancy present within the musculoskeletal system may offer a non-invasive source of signals for movement augmentation, where the set of muscle activations that do not produce force/torque (muscle-to-force null-space) could be controlled simultaneously to the natural limbs. Here, we investigated the viability of extracting movement augmentation control signals from the muscles of the wrist complex. Our study assessed (i) if controlled variation of the muscle activation patterns in the wrist joint's null-space is possible; and (ii) whether force and null-space cursor targets could be reached concurrently. During the null-space target reaching condition, participants used muscle-to-force null-space muscle activation to move their cursor towards a displayed target while minimising the exerted force as visualised through the cursor's size. Initial targets were positioned to require natural co-contraction in the null-space and if participants showed a consistent ability to reach for their current target, they would rotate 5 ∘ incrementally to generate muscle activation patterns further away from their natural co-contraction. In contrast, during the concurrent target reaching condition participants were required to match a target position and size, where their cursor position was instead controlled by their exerted flexion–extension and radial-ulnar deviation, while its size was changed by their natural co-contraction magnitude. The results collected from 10 participants suggest that while there was variation in each participant's co-contraction behaviour, most did not possess the ability to control this variation for muscle-to-force null-space virtual reaching. In contrast, participants did show a direction and target size dependent ability to vary isometric force and co-contraction activity concurrently. Our results indicate the limitations of using the muscle-to-force null-space activity of joints with a low level of redundancy as a possible command signal for movement augmentation. [ABSTRACT FROM AUTHOR]

The impact of COVID-19 on sport and physical activity has been a subject of considerable interest and concern. Padel satisfies the desire for social interaction and a return to sport after a period of inactivity. The aim of this study is to show a correlation between return to sport and related injuries in a population of padel players. The study was carried out in a survey mode, consisting of a questionnaire with four sections and fifty questions on the biographical data of the individual, lifestyle before and after the pandemic, knowledge and playing level of padel and injuries. The self-administered online questionnaire was developed and validated by a panel of physiotherapists, orthopaedic surgeons, and physiatrists with experience in clinical practice and/or musculoskeletal research. The study was conducted in a survey mode from a smartphone or computer via a link to a multiple-choice document. The link to the questionnaire was distributed via mailing lists, social media, and chat applications. A previous history of injury prior to the Covid pandemic, a higher body mass index, and increased sporting activity were all linked to a higher number of injuries. Daily steps, age, experience, and the average number of games per week were all found to have no significant effect. The enforced rest during the lockdown period highlighted the importance of comprehensive injury prevention strategies in sports, as well as understanding the impact of de-training and periods of inactivity on risk of injury. [ABSTRACT FROM AUTHOR]