Search

This study presents a simple method that allows us to modify the composition, morphological, and surface properties of three-dimensional hierarchical Nb3O7(OH) superstructures, resulting in strongly enhanced photocatalytic H2 production. The superstructures consist of highly ordered nanowire networks and self-assemble under hydrothermal conditions. The presence of titanium affects the morphology of the superstructures, resulting in increased surface areas for higher doping levels. Up to 12 at. % titanium is incorporated into the Nb3O7(OH) crystal lattice via substitution of niobium at its octahedral lattice sites. Further titanium excess results in the formation of niobium-doped TiO2 plates, which overgrow the surface of the Nb3O7(OH) superstructures. Photoluminescence spectroscopy indicates fewer charge recombination processes near the surface of the nanostructures with an increasing titanium concentration in the crystal lattice. The combination of larger surface areas with fewer quenching sites at the crystal surface yields higher H2 evolution rates for the doped samples, with the rate being doubled by incorporation of 5.5 ± 0.7 at. % Ti. [ABSTRACT FROM AUTHOR]

Nanostructured niobium oxides and hydroxides are potential candidates for photochemical applications due to their excellent optical and electronic properties. In the present work the thermal stability of Nb3O7(OH) superstructures prepared by a simple hydrothermal approach is investigated at the atomic scale. Transmission electron microscopy and electron energy-loss spectroscopy provide insights into the phase transformation occurring at elevated temperatures and probe the effect of the atmospheric conditions. In the presence of oxygen, H2O is released from the crystal at temperatures above 500 °C, and the crystallographic structure changes to H-Nb2O5. In addition to the high thermal stability of Nb3O7(OH), the morphology was found to be stable, and first changes in the form of a merging of nanowires are not observed until 850 °C. Under reducing conditions in a transmission electron microscope and during electron beam bombardment, an oxygen-deficient phase is formed at temperatures above 750 °C. This transformation starts with the formation of defects in the crystal lattice at 450 °C and goes along with the formation of pores in the nanowires which accommodate the volume differences of the two crystal phases. [ABSTRACT FROM AUTHOR]

A fast synthesis approach toward sub-60 nm sized MOF nanoparticles was developed by employing auxiliary additives. Control over the size of HKUST-1 and IRMOF-3 particles was gained by adjusting the concentration and type of stabilizers. Colloidal solutions of the MOFs were used for the formation of optically homogeneous thin films by spin-coating. [ABSTRACT FROM AUTHOR]

Graphical abstract Nickel sulfide (NiS) nanostructures with great crystallinity and high phase-purity were successfully synthesized using laser irradiation of an aqueous precursor solution under the ambient condition without further calcination. Given the remarkable value of electrochemically active surface area and synergistic effect of Ni3+ and Ni2+, the NiS synthesized for 4h delivered not only excellent electrocatalytic activities for hydrogen evolution reaction and but also high specific capacitance and remarkable rate capability for supercapacitors. Highlights • NiS nanoparticles was synthesized using laser irradiation of an aqueous precursor solution under the ambient condition. • Crystalline nanoparticles with high phase-purity were achieved without further calcination. • Other transition metal sulfides were also successfully obtained by this approach. • Efficient electrocatalytic HER activity and capacitive performances were achieved. Abstract Rational design and synthesis of transition metal sulfide complex nanostructures are significant for achieving desired materials properties for a variety of applications. Herein, we synthesized nickel sulfide (NiS) nanostructures using laser irradiation in an aqueous solution and under the ambient condition. Crystalline nanostructures with high phase-purity were achieved without further calcination. Other transition metal sulfides, such as CuS and ZnS, were also successfully synthesized using the laser irradiation approach, suggesting the practical application of this method. The hydrogen evolution reaction (HER) measurements show the NiS nanostructures synthesized for 4h (NiS-4h) not only exhibited competitive overpotential (−159 mV vs. RHE at 10 A/g), lower Tafel slope (218 mV/dec) but also delivered long-term stability (14 A/g at −250 mV vs. RHE for 12h). Moreover, the NiS-4h functioned as the electrode for supercapacitor with excellent specific capacitance (3761 F/g at 10 mV/s), reversibility and rate capability (1152 F/g at 100 mV/s). These superb electrochemical performances are attributed to the remarkable value of electrochemically active surface area (ECSA) and synergistic effect of Ni3+OOH for HER electrocatalytic activities, while the co-existence of Ni2+ and Ni3+ facilitates the rich redox reactions of NiS for supercapacitor. [ABSTRACT FROM AUTHOR]

Abstract: Extending the portfolio of novel stimuli‐responsive, high‐refractive‐index (RI) materials besides titania is key to improve the optical quality and sensing performance of existing photonic devices. Herein, lithium tin sulfide (LTS) nanosheets are introduced as a novel solution processable ultrahigh RI material (n = 2.50), which can be casted into homogeneous thin films using wet‐chemical deposition methods. Owing to its 2D morphology, thin films of LTS nanosheets are able to swell in response to changes of relative humidity. Integration of LTS nanosheets into Bragg stacks (BSs) based on TiO2, SiO2, nanoparticles or H3Sb3P2O14 nanosheets affords multilayer systems with high optical quality at an extremely low device thickness of below 1 µm. Owing to the ultrahigh RI of LTS nanosheets and the high transparency of the thin films, BSs based on porous titania as the low‐RI material are realized for the first time, showing potential application in light‐managing devices. Moreover, the highest RI contrast ever realized in BSs based on SiO2 and LTS nanosheets is reported. Finally, exceptional swelling capability of an all‐nanosheet BS based on LTS and H3Sb3P2O14 nanosheets is demonstrated, which bodes well for a new generation of humidity sensors with extremely high sensitivity. [ABSTRACT FROM AUTHOR]

Highlights: [•] TEM plan-view and cross-section preparation methods were developed and adjusted for E. huxleyi. [•] H2O thinning for plan-view samples is a very gentle method to obtain electron transparent samples. [•] FIB sectioning for cross-section samples is very appropriate for coccoliths like E. huxleyi. [•] Electron beam stability investigations of calcite were done by BF imaging, HRTEM, SAD and EELS. [•] The samples are stable for several minutes, when using 300kV and parallel illumination. [ABSTRACT FROM AUTHOR]