Search

Biodegradable polymers are materials that can decompose through the action of various environmental microorganisms, such as bacteria and fungi, to form water and carbon dioxide. The biodegradability characteristics have led to a growing demand for the accurate and precise determination of the degraded polymer composition. With the advancements in analytical product development, various analytical methods are available and touted as practical and preferable methods of bioanalytical techniques, which enable the understanding of the complex composition of biopolymers such as polyhydroxyalkanoates and poly(lactic acid). The former part of this review discusses the definition and examples of biopolymers, followed by the theory and instrumentation of analytical methods applicable to the analysis of biopolymers, such as physical methods (SEM, TEM, weighing analytical balance, etc.), chromatographic methods (GC, THM-GC, SEC/GPC), spectroscopic methods (NMR, FTIR, XRD, XRF), respirometric methods, thermal methods (DSC, DTA, TGA), and meta-analysis. Special focus is given to the chromatographic methods, because this is the routine method of polymer analysis. The aim of this review is to focus on the recent developments in the field of biopolymer analysis and instrument application to analyse the various types of biopolymers. [ABSTRACT FROM AUTHOR]

Simple Summary: Palm oil mill effluent (POME) requires treatment prior to discharge to the environment. Biological processing technology is highly preferable due to its advantages of environmentally friendliness, cost effectiveness, and practicality. These methods utilized various designs and modifications of bioreactors fostering effective fermentation technology in the presence of fungi, bacteria, microalgae, and a consortium of microorganisms. This review highlights the recent biological processing technology for POME treatment as a resource utilization. POME is the most voluminous waste generated from palm oil milling activities. The discharge of POME into the environment without any treatment processing could inflict an undesirable hazard to humans and the environment due to its high amount of toxins, organic, and inorganic materials. The treatment of POME prior to discharge into the environment is utmost required to protect the liability for human health and the environment. Biological treatments are preferable due to eco-friendly attributes that are technically and economically feasible. The goal of this review article is to highlight the current state of development in the biological processing technologies for POME treatment. These biological processing technologies are conducted in the presence of fungi, bacteria, microalgae, and a consortium of microorganisms. Numerous microbes are listed to identify the most efficient strain by monitoring the BOD, COD, working volume of the reactor, and treatment time. The most effective processing technology for POME treatment uses an upflow anaerobic sludge blanket reactor with the COD value of 99%, hydraulic retention time of 7.2 days, and a working volume of 4.7 litres. Biological processing technologies are mooted as an efficient and sustainable management practice of POME waste. [ABSTRACT FROM AUTHOR]

Highlights • THM-GC was applied to monitor the change in copolymer composition of film samples during soil burial test. • 3 HHx moieties in the polymer chains were preferentially biodegraded owing to their low crystallinity. • Local variation in the degree of biodegradation using only 30 μg of P(3HB-co-3HHx) film sample. Abstract Soil burial biodegradation behavior of poly(3-hydroxybutyrate- co -3-hydroxyhexanoate) [P(3HB- co -3HHx)] was studied based on its copolymer composition determined by thermally assisted hydrolysis and methylation-gas chromatography (THM-GC). The change in copolymer composition of P(3HB- co -3HHx) film samples during soil burial degradation test was monitored in detail by THM-GC. As a result, the copolymer compositions of 3HB units gradually increased, while those of 3HHx units decreased with soil burial time, almost correlating with recovery weight. Based on these results, the biodegradation mechanism of P(3HB- co -3HHx) was elucidated with considering the influence of the crystallinity on the biodegradability. Furthermore, local differences in biodegradability of a given P(3HB- co -3HHx) film after soil burial test were also successfully evaluated from the copolymer compositions obtained by THM-GC. [ABSTRACT FROM AUTHOR]

There is considerable interest in the development of simple methods for quantifying production of the biodegradable polyester poly(3-hydroxybutyrate) [P(3HB)] by bacteria. Cells of Cupriavidus necator were grown on agar medium containing different concentrations of glucose (10–25 g/L) as a sole carbon source. Trace amounts (100±5 μg) of dried C. necator cells were directly subjected to thermally assisted hydrolysis and methylation-gas chromatography (THM-GC) in the presence of tetramethylammonium hydroxide (TMAH). On the resulting chromatograms, a series of characteristic peaks, attributed to the THM products from poly(3-hydroxybutylate) accumulated in the bacterial cells, were clearly observed without any interfering component. Based on the peak intensities, the contents of P(3HB) in C. necator were determined precisely and rapidly without using any cumbersome sample pretreatment. Furthermore, the values of the P(3HB) contents coincided overall with those obtained by the conventional method involving solvent extraction followed by gravimetric determination. [ABSTRACT FROM AUTHOR]

Thermally assisted hydrolysis and methylation-gas chromatography (THM-GC) in the presence of an organic alkali was validated for the compositional analysis of poly(3-hydroxybutyrate- co -3-hydroxyhexanoate) [P(3HB- co -3HHx)] accumulated in whole bacterial cells. Recombinant Cupriavidus necator Re2058/pCB113 was grown in a batch fermentation with different concentration of palm oil and fructose in order to control the molar fraction of 3HHx in P(3HB- co -3HHx) produced in the cells. Trace amounts (30 μg) of freeze-dried cells were directly subjected to THM-GC in the presence of tetramethylammonium hydroxide (TMAH) at 400 °C. The obtained chromatograms clearly showed nine characteristic peaks, attributed to the THM products from 3HB and 3HHx units in the polymer chains, without any appreciable interference by the bacterial matrix components. Based on these peak intensities, the copolymer compositions were determined rapidly without using any cumbersome and lengthy sample pretreatment as in conventional GC method. Moreover, the compositions thus obtained were strongly correlated with those by NMR and conventional GC involving solvent extraction. [ABSTRACT FROM AUTHOR]

Abstract: In our previous paper, thermally assisted hydrolysis and methylation-gas chromatography (THM-GC) measurements of poly(butylene succinate-co-butylene adipate) (PBSA) in the presence of tetramethylammonium hydroxide had revealed that the butylene adipate (BA) content in the PBSA films gradually decreased with soil burial degradation time. In order to clarify the cause of this change in copolymer composition, biodegradation behavior of PBSA with lowered crystallinity was evaluated by THM-GC. PBSA film samples with lower degree of crystallinity, prepared by heating and cooling quickly the original commercially available films, were subjected to a soil burial biodegradation test at 30°C for up to 4 weeks. The copolymer compositions between BA and butylene succinate (BS) units in various stages of the degraded film samples were estimated on the basis of chromatograms obtained by THM-GC with less than 5% of the relative standard deviations. As a result, the change in copolymer composition for the heated PBSA films during soil burial was relatively small compared to the original films, suggesting that biodegradation for the heated films proceeded with the comparable rate for both BA and BS-rich moieties due to lowered crystallinity. Based on these results, the reason for the change in copolymer composition observed for the original PBSA films was clarified as follows: (1) the BA-rich moieties in the copolymer chains could show relatively lower crystallinity than the BS-rich moieties and (2) the BA-rich moieties were preferentially biodegraded during soil burial test, leading to the decrease in the BA content as the biodegradation proceeded. [Copyright &y& Elsevier]

Biodegradability of poly(butylene succinate-co-butylene adipate) (PBSA) was studied based on its copolymer composition determined by thermally assisted hydrolysis and methylation-gas chromatography (THM-GC) using trace amounts (20 µg) of the film samples. The copolymer compositions of butylene adipate (BA) units gradually decreased with soil burial degradation time, reflecting preferential biodegradation of BA moieties during soil burial due to their lower crystallinity. Furthermore, local differences in biodegradability of a given PBSA film after soil burial were also successfully evaluated. [ABSTRACT FROM PUBLISHER]

Biochar has explored in the search of a cost-effective and environmentally friendly photocatalyst for the efficient degradation of CIP antibiotic pollutants. Biochar (BC) produced from palm oil mill sludge was used as a base to fabricate biochar-based BiOBr composites by varying the mass ratio of biochar and BiOBr via a hydrothermal route. The optimized composites BBC-1:1 has exhibited the formation of crystal struvture as tetragonal BiOBr with a a significant specific surface of 267 m2/g (BBC-1:1) while incorporating different mass ratios of BC with BiOBr. This composite facilitates the band gap of BiOBr from 2.87 to 2.42 eV and is consistent with the decreasing recombination rate of electron-hole pairs as suggested by UV-Vis DRS and photoluminescence (PL), respectively. Consequently, the synergistic effect of biochar BiOBr leads to a higher degradation efficiency of CIP showing the highest efficiency (97.49 %) and that of pure BiOBr being 55.66 % under optimized conditions. The degradation rate of the BBC-1:1 composite which observed to be 0.0156 min−1 is 3.25 times that of BiOBr (0.0048 min−1). Furthermore, the scavenging experiments confirmed the significant contribution of the active radicals h+ and O 2 - as the main photoactive species in the photocatalytic degradation of CIP. Consequently, the photocatalytic degradation mechanism was discussed and the reusability test confirmed the high stability of the BBC composites up to 77 % for the seventh cycles. These results show that the BBC composite is suitable for large-scale practical applications as a green photocatalyst. [Display omitted] • Production of POMES biochar via pyrolysis for enhancing photocatalytic activity was described. • The surface area of the prepared POMES biochar-based (267 m2/g) photocatalyst is higher than the pristine BiOBr (2.85 m2/g). • POMES biochar significantly reduced the band gap of BiOBr from 2.87 – 2.42 eV. • POMES biochar played a key role in improving the degradation efficiency of CIP from ∼ 55–97 %. • Possible interaction mechanisms between the biochar-based photocatalyst composites and Ciprofloxacin was established. [ABSTRACT FROM AUTHOR]

Overconsumption of plastic goods and improper handling of petroleum-derived plastic waste have brought a plethora of negative impacts to the environment, ecosystem and human health due to its recalcitrance to degradation. These drawbacks become the main driving force behind finding biopolymers with the degradable properties. With the advancement in biopolymer research, polyhydroxyalkanoate (PHA) and poly(lacyic acid) (PLA) and its composites have been alluded to as a potential alternative to replace the petrochemical counterpart. This review highlights the current synthesis process and application of PHAs and PLA and its composites for food packaging materials and coatings. These biopolymers can be further ameliorated to enhance their applicability and are discussed by including the current commercially available packaging products. Factors influencing biodegradation are outlined in the latter part of this review. The main aim of this review article is to organize the scattered available information on various aspects of PHAs and PLA, and its composites for packaging application purposes. It is evident from a literature survey of about 140 recently published papers from the past 15 years that PLA and PHA show excellent physical properties as potential food packaging materials. [ABSTRACT FROM AUTHOR]