Search

This paper examines how extrusion-based 3D-printing technology is evolving, utilising geopolymers (GPs) as sustainable inorganic aluminosilicate materials. Particularly, the current state of 3D-printing geopolymers is critically examined in this study from the perspectives of the production process, printability need, mix design, early-age material features, and sustainability, with an emphasis on the effects of various elements including the examination of the fresh and hardened properties of 3D-printed geopolymers, depending on the matrix composition, reinforcement type, curing process, and printing configuration. The differences and potential of two-part and one-part geopolymers are also analysed. The applications of advanced printable geopolymer materials and products are highlighted, along with some specific examples. The primary issues, outlooks, and paths for future efforts necessary to advance this technology are identified. [ABSTRACT FROM AUTHOR]

With progress in the bone tissue engineering (BTE) field, there is an important need to develop innovative biomaterials to improve the bone healing process using reproducible, affordable, and low-environmental-impact alternative synthetic strategies. This review thoroughly examines geopolymers' state-of-the-art and current applications and their future perspectives for bone tissue applications. This paper aims to analyse the potential of geopolymer materials in biomedical applications by reviewing the recent literature. Moreover, the characteristics of materials traditionally used as bioscaffolds are also compared, critically analysing the strengths and weaknesses of their use. The concerns that prevented the widespread use of alkali-activated materials as biomaterials (such as their toxicity and limited osteoconductivity) and the potentialities of geopolymers as ceramic biomaterials have also been considered. In particular, the possibility of targeting their mechanical properties and morphologies through their chemical compositions to meet specific and relevant requirements, such as biocompatibility and controlled porosity, is described. A statistical analysis of the published scientific literature is presented. Data on "geopolymers for biomedical applications" were extracted from the Scopus database. This paper focuses on possible strategies necessary to overcome the barriers that have limited their application in biomedicine. Specifically, innovative hybrid geopolymer-based formulations (alkali-activated mixtures for additive manufacturing) and their composites that optimise the porous morphology of bioscaffolds while minimising their toxicity for BTE are discussed. [ABSTRACT FROM AUTHOR]

Summary: Objectives: The purpose of this study was to simultaneously determine the impact of exposure times and incremental resin composite overlaying thickness on the cure kinetics of a light activated composite and a dentin adhesive at selected depths of a simulated restoration. Methods: Levels and kinetics of polymerization of a light activated resin composite (Z250, 3M-ESPE) and dentin adhesive (Excite, Ivoclar) cured with a halogen light unit (Demetron, Kerr, USA) operating at low/medium intensity (500mW/cm2) for different exposure durations (20 and 60s) were measured at selected depths (0.3, 0.6 and 1mm) using a modified calorimetric analyzer (DSC 25, METLLER-TOLEDO). Results: Final polymerization levels of materials up to 1mm through the composite are not significantly different while the light shielding effect of incremental resin composite overlaying progressively reduces their reaction rates. Significance: Prolonged irradiation time at low/medium energies is effective for proper conversion of a resin composite and dentin adhesive; 60s irradiation time provides the maximum obtainable conversion through the dental resin composite for thicknesses up to 1mm. [Copyright &y& Elsevier]

The biomechanical effect of mandibular functional flexure on stress build-up in implant-supported fixed restorations is discussed. The relative deformations and stress distributions in six different designs of implant-supported prosthetic systems (six or four implants, with or without distal cantilevers, cross-arch or midline-divided bar into two free-standing bridges) were analysed by a three-dimensional finite element (FE) model of a human edentulous mandible. A significant amount of stress in the more distal implants and the superstructure at the symphysis arises as a consequence of mandible functional flexure. The analysis of the stress distributions generated by the different restorative patterns suggests that a division of the superstructure at the level of the symphysis significantly restores the natural functional flexure of the mandible. [ABSTRACT FROM AUTHOR]

Objectives: Teeth, adhesively restored with resin-based materials, were modeled by 3D-finite elements analysis that showed a premature failure during polymerization shrinkage and occlusal loading.Methods: Simulation of Class II MOD composite restorations with a resin bonding system revealed a complex biomechanical behavior arising from the simultaneous effects of polymerization shrinkage, composite stiffness and adhesive interface strain. Due to a polymerization contraction, shrinkage stress increases with the rigidity of the composites utilised in the restoration, while the cusp movements under occlusal loading are inversely proportional to the rigidity of the composites. The adhesive layer''s strain also plays a relevant role in the attenuation of the polymerization and occlusal loading stresses.Results: The choice of an appropriately compliant adhesive layer, able to partially absorb the composite deformation, limits the intensity of the stress transmitted to the remaining natural tooth tissues. For adhesives and composites of different rigidities, FEM analysis allows the determination of the optimal adhesive layer thickness leading to maximum stress release while preserving the interface integrity. Application of a thin layer of a more flexible adhesive (lower elastic modulus) leads to the same stress relief as thick layers of less flexible adhesive (higher elastic modulus). [Copyright &y& Elsevier]

Alkaline sodium hydroxide/sodium silicate-activating high-purity metakaolin geopolymerization is described in terms of metakaolin deconstruction in tetrahedral hydrate silicate [O[Si(OH)3]]− and aluminate [Al(OH)4]− ionic precursors followed by their reassembling in linear and branched sialates monomers that randomly copolymerize into an irregular crosslinked aluminosilicate network. The novelty of the approach resides in the concurrent thermo-calorimetric (differential scanning calorimetry, DSC) and rheological (dynamic mechanical analysis, DMA) characterizations of the liquid slurry during the transformation into a gel and a structural glassy solid. Tests were run either in temperature scan (1 °C/min) or isothermal (20 °C, 30 °C, 40 °C) cure conditions. A Gaussian functions deconvolution method has been applied to the DSC multi-peak thermograms to separate the kinetic contributions of the oligomer's concurrent reactions. DSC thermograms of all tested materials are well-fitted by a combination of three overlapping Gaussian curves that are associated with the initial linear low-molecular-weight (Mw) oligomers (P1) formation, oligomers branching into alumina-rich and silica-rich gels (P2), and inter- and intra-molecular crosslinking (P3). The loss factor has been used to define viscoelastic behavioral zones for each DMA rheo-thermogram operated in the same DSC thermal conditions. Macromolecular evolution and viscoelastic properties have been obtained by pairing the deconvoluted DSC thermograms with the viscoelastic behavioral zones of the DMA rheo-thermograms. Two main chemorheological behaviors have been identified relative to pre- and post-gelation separation of the viscoelastic liquid from the viscoelastic solid. Each comprises three behavioral zones, accounting for the concurrently occurring linear and branching oligomerization, aluminate-rich and silica-rich gel nucleations, crosslinking, and vitrification. A "rubbery plateau" in the loss factor path, observed for all the testing conditions, identifies a large behavioral transition zone dividing the incipient gelling liquid slurry from the material hard setting and vitrification. [ABSTRACT FROM AUTHOR]

Although geopolymers, as structural materials, should have superior engineering properties than traditional cementitious materials, they often need to improve their final characteristics' reproducibility due to the need for more control of the complex silico-aluminate decomposition and polymerisation stages. Thermosetting of a reactive geopolymeric paste involves tetrahedral Silicate and Aluminate precursor condensation into polyfunctional oligomers of progressively higher molecular weight, transforming the initial liquid into a gel and a structural solid. Viscosity and gelation control become particularly critical when the geopolymer is processed with 3D printing additive technology. Its physical state modification kinetics should match the flow and setting characteristics required by the deposition process. The reaction kinetics and the elastic and viscous characteristics preceding gelation and hardening have been investigated for an alkali-activated Metakaolin/Sodium Silicate-Sodium Hydroxide paste with a Si/Al ratio > 3. A chemoreological approach has been extended to these inorganic polymerisable systems, as already utilised for organic thermosetting polymers. Differential scanning calorimetry and Oscillatory DMA were carried out to monitor the advancement of the polymerisation reaction and the associated variations of the rheological viscoelastic properties. Dynamic thermal scans were run at 1 °C/min and a frequency of 10 Hz for the dynamic mechanical tests. The observed kinetics of polymerisation and variations of the elastic and viscous components of the complex viscosities and shear moduli are described in terms of polycondensation of linear and branched chains of oligomeric macromolecules of increasing complexity and molecular weight up to gelation (Gel1) and cross-linking of the gelled macrostructure (Gel2) and final glassy state. Geopolymerization can be allocated into two main behavioural zones: a viscoelastic liquid paste below 32.5% of reaction advancement and a viscoelastic solid above. Initial complex viscosities range from 2.3 ± 0.9  × 10−5 MPa*s to 6.8 ± 0.9  × 10−2 in the liquid-like state and from 1.9 ± 0.1 MPa to 9.6 ± 2.1 × 102 MPa in the solid-like state. [ABSTRACT FROM AUTHOR]

This study proposes an innovative integrated transportation/photovoltaic energy system that will enable the Pompeii Municipality to develop a set of urban ecotourism policies and instruments for the preparation and adoption of an environmental sustainable mobility strategy to be applied in their future municipality urban plan. The innovative character of the study resides in two principal aspects: the technologies applied, namely, the use of thin fi lm photovoltaic (hereafter PV) panels (copper-indium-gallium-(di)selenide cells) on a fl exible support, and the way these technologies are applied. A combined energy/mobility approach based on 'Zero km and zero emission energy production for zero emission electric transportation strategy' to be implemented in the Public Urban Plan (Piano Urbanistico Comunale) of the town of Pompeii is presented. According to the technology to be adopted (thin PV fi lm on fl exible supports integrated in the parking shelters roofs), to the foreseen PV plant of 700 sqm parking lots, and to an innovative multifunctional design approach (bio-mimicking sun track roof), an improved yearly power production of 100.0 MWh is foreseen with a 20-25% increase of power production with respect to standard fi xed PV panels of the same type. [ABSTRACT FROM AUTHOR]

Background: Customized computer‐aided‐design/computer‐aided‐manufacturing (CAD/CAM) titanium meshes have been adopted for alveolar bone augmentation. But the inaccuracies between planned and created bone volume/contour are quite common, and the surgical placement of the customized mesh was considered as the first critical factor. However, the evaluation of surgical placement accuracy of customized mesh is currently lacking. Purpose: The aim of this study was to evaluate the accuracy of the surgical placement of customized meshes. Methods: A total of 30 cases, 20 without the screws‐position‐guided template and 10 with the screws‐position‐guided template, were included in this study. The cone beam CT (CBCT) data sets of pre‐ and postoperative were converted into 3D models and digitally aligned. Then the actual placement of customized mesh and retainer titanium screws was compared to the virtual one to assess the surgical placement accuracy of customized mesh. At least 6 months after surgery, a new CBCT was taken and converted into 3D models. Planned bone volume, created bone volume, vertical bone augmentation, healing complications rate, pseudo‐periosteum rate, exposure rate, and infection rate were all evaluated. Results: The 3D digital reconstruction/registration analysis showed that the average difference between actual placement and planned one of customized mesh in positive and negative directions was 2.69 ± 0.70 mm and −1.41 ± 0.90 mm, respectively, without the screws‐position‐guided template. And the mean difference values between the actual and planned placement of the screws on the X and Y axes were 0.74 ± 0.85 mm and 0.89 ± 0.84 mm. In contrast, with the screws‐position‐guided template, the results were 2.38 ± 0.69 mm and −1.30 ± 1.13 mm. Accordingly, the mean difference values of screws were 0.76 ± 0.84 mm and 0.94 ± 0.72 mm. There was no statistical difference between the two groups, and the noninferiority of the control group compared to the test group was also confirmed by the comparative analysis. Conclusion: It can be concluded that there is a certain deviation between the planned surgical placement and actual one of customized mesh, and using screws‐position‐guided template is of limited help for its accurate placement. Further research is needed to achieve precise surgical placement of the customized mesh to achieve precise alveolar bone augmentation. [ABSTRACT FROM AUTHOR]

Bioactive Materials have been used since decades but the researches on these materials are still continuing in phase. This material got extra ordinary attention by the scientist and researchers. Bioactive material has ability to bind itself chemically with natural bone tissues. Bioactive materials bring revolution in the field of bone repair and implantology. Bioactive materials have also ability to effect on gene activation of osteoblastic cells that enhance proliferation, resulting rapid bone formation. At last the techniques through which bioactive materials are used to deposits on the implant, to create bond between implants and the bone. Cost evaluation is the very essential part that classifies the use of material commercially. [ABSTRACT FROM AUTHOR]

Abstract: Objective: To define the cytotoxicity of a photo-cured composite when used as a bonding system under a composite inlay. Methods: Composite specimens were photo-cured with or without a 2mm composite inlay interposed between them and the light source. Samples were extracted in complete cell culture medium and the obtained eluates applied to primary cultures of human pulp and gingival fibroblasts. After 72h of incubation, cell viability was evaluated by MTT assay. Survival rates were calculated with respect to negative controls. Results: Both shielded and unshielded composite samples were cytotoxic to pulp and gingival cells. The inlay shielded composite samples reached a significantly higher level of cytotoxicity compared to the unshielded ones. Significance: The results suggested that the cytotoxicity of a light-cured composite resin used as a bonding system for indirect composite restorations may be significantly increased as a result of an inlay light-shielding effect. [Copyright &y& Elsevier]

[Display omitted] • This study conducts a proof-of-concept investigation into the effects of DLP-based HA/TCP scaffolds featuring bioinspired 3D architectures on vertical bone augmentation. • The biomechanical and osteogenesis properties of scaffolds with different structural characteristics (trabecular, open-channel, layered) were investigated in vitro and in vivo. • Remarkable bone neoformation was observed around the lower half of the scaffolds and highest osteogenic was approximately 4 mm. • The scaffolds effectively fulfill the biomechanical and osteogenic prerequisites for vertical bone augmentation, all demonstrating satisfactory osteogenic and vascularization properties. Vertical bone augmentation remains a significant challenge in implant dentistry and orofacial surgery, which is aimed at regenerating bone extraskeletal. This study conducts a proof-of-concept investigation into the effects of additively manufactured bioceramic scaffolds featuring bioinspired 3D architectures (trabecular, open channel, and layered) on vertical bone augmentation from the perspectives of osteogenesis and biomechanics. The experimental scaffold design was categorized into 4 Groups. Compression tests and finite element analysis (FEA) were conducted to assess the mechanical properties of scaffolds, Computational Fluid Dynamics (CFD) was employed to evaluate permeability and wall shear stress in scaffolds. Subsequently, the osteogenesis and biomechanical properties of these scaffolds were systematically evaluated in vivo using a rabbit calvarium model. The results illustrated that compression strength for all groups was within the typical range of trabecular bone. Remarkable bone neoformation was observed around the lower half of the scaffold, establishing a strong osseointegration effect with both the calvaria bone and scaffolds, and the highest osteogenic growth (approximately 4 mm) was observed at the interface between the titanium screw and the scaffold. This study scientifically proves that DLP-based bioceramic scaffolds effectively fulfill the osteogenic and biomechanical prerequisites for vertical bone augmentation, thereby providing preliminary validation of this concept. [ABSTRACT FROM AUTHOR]

Innovative tissue engineering biomimetic hydrogels based on hydrophilic polymers have been investigated for their physical and mechanical properties. 5% to 25% by volume loading PHEMA-nanosilica glassy hybrid samples were equilibrated at 37 ◦C in aqueous physiological isotonic and hypotonic saline solutions (0.15 and 0.05 M NaCl) simulating two limiting possible compositions of physiological extracellular fluids. The glassy and hydrated hybrid materials were characterized by both dynamo-mechanical properties and equilibrium absorptions in the two physiological-like aqueous solutions. The mechanical and morphological modifications occurring in the samples have been described. The 5% volume nanosilica loading hybrid nanocomposite composition showed mechanical characteristics in the dry and hydrated states that were comparable to those of cortical bone and articular cartilage, respectively, and then chosen for further sorption kinetics characterization. Sorption and swelling kinetics were monitored up to equilibrium. Changes in water activities and osmotic pressures in the water-hybrid systems equilibrated at the two limiting solute molarities of the physiological solutions have been related to the observed anomalous sorption modes using the Flory-Huggins interaction parameter approach. The bulk modulus of the dry and glassy PHEMA-5% nanosilica hybrid at 37 ◦C has been observed to be comparable with the values of the osmotic pressures generated from the sorption of isotonic and hypotonic solutions. The anomalous sorption modes and swelling rates are coherent with the difference between osmotic swelling pressures and hybrid glassy nano-composite bulk modulus: the lower the differences the higher the swelling rate and equilibrium solution uptakes. Bone tissue engineering benefits of the use of tuneable biomimetic scaffold biomaterials that can be “designed” to act as biocompatible and biomechanically active hybrid interfaces are discussed. [ABSTRACT FROM AUTHOR]

Abstract Local abnormal angiogenesis and cardiovascular system reorganization have been observed in embryos exposed to a simulated microgravity (SM) environment. In this study, changes in key molecular signals and pathways in cardiovascular development have been investigated under microgravity conditions. In particular, the caudal vein plexus (CVP) network, formed by sprouting angiogenesis has been chosen. Zebrafish embryos were exposed to SM using a ground-based microgravity bioreactor for 24 and 36 h. The SM was observed to have no effect on the zebrafish length, tail width and incubation time whereas it was observed to significantly reduce the heart rate frequency and to promote abnormal development of the CVP network in the embryos. Nitric oxide (NO) content demonstrated that the total proteins in zebrafish embryos were significantly higher in SM than in the control group grown under normal conditions. It was then preliminarily determined how NO signals were involved in SM regulated zebrafish CVP network formation. nos2b MO was injected and CVP network evolution was observed in 36 h post fertilization (hpf) under SM condition. The results showed that the CVP network formation was considerably decreased in the nos2b MO treated group. However, this inhibition of the CVP network development was not observed in control MO group, indicating that nos2b is involved in the SM-regulated vascular development process in zebrafish. Moreover, specific phosphoinositide 3-kinase (PI3K) inhibitors such as LY294002 were also tested on zebrafish embryos under SM condition. This treatment significantly inhibited the formation of zebrafish CVP network. Furthermore, overexpression of nos2b partly rescued the LY294002-caused CVP network failure. Therefore, it can be concluded that SM affects zebrafish CVP network remodeling by enhancing angiogenesis. Additionally, the PI3K-nos2b signaling pathway is involved in this process. [ABSTRACT FROM AUTHOR]

Objectives To present a practical approach that combines biomechanical tests, microcomputed tomography (μCT) and histomorphometry, providing quantitative results on bone structure and mechanical properties in a minipig model, in order to investigate the specific response to an innovative dental biomaterial. Methods Titanium implants with innovative three-dimensional scaffolds were inserted in the tibias of 4 minipigs. Primary stability and osseointegration were investigated by means of insertion torque (IT) values, resonance frequency analysis (RFA), bone-to-implant contact (BIC), bone mineral density (BMD) and stereological measures of trabecular bone. Results A significant positive correlation was found between IT and RFA ( r = 0.980, p = 0.0001). BMD at the implant sites was 18% less than the reference values ( p = 0.0156). Peri-implant Tb.Th was 50% higher, while Tb.N was 50% lower than the reference zone ( p < 0.003) and they were negatively correlated ( r = −0.897, p = 0.006). Significance μCT increases evaluation throughput and offers the possibility for qualitative three-dimensional recording of the bone–implant system as well as for non-destructive evaluation of bone architecture and mineral density, in combination with conventional analysis methods. The proposed multimodal approach allows to improve accuracy and reproducibility for peri-implant bone measurements and could support future investigations. [ABSTRACT FROM AUTHOR]

The aim of the present study was to evaluate differences in the ultimate fracture resistance of titanium and zirconia abutments. Twenty titanium fixtures were embedded in 20 resin mandible section simulators to mimic osseointegrated implants in the premolar area. The embedded implants were then randomly divided into two groups. Afterwards, specimens in group A ( n=10) were connected to titanium abutments (TiDesign 3.5/4.0, 5.5, 1.5 mm), while specimens in group B ( n=10) were connected to zirconia abutments (ZirDesign 3.5/4.0, 5.5, 1.5 mm). Both groups were loaded to failure in a dynamometric testing machine. Fractured samples were then analyzed by scanning electron microscopy (SEM). Group A showed a significantly higher fracture strength than that observed in group B. Group A failures were observed at the screw that connects the abutment with the implant while the abutment connection hexagons were plastically bent by the applied load. Group B failures were a result of abutment fractures. SEM analysis showed that in group A the screw failure was driven by crack nucleation, coalescence and propagation, while in group B, the SEM analysis of failed surfaces showed the conchoidal fracture profile characteristic of brittle materials. The strength of both tested systems is adequate to resist physiologic chewing forces in the premolar area. Conversely, the titanium and zirconia failure modes evaluated here occurred at unphysiological loads. In addition, because the abutments were tested witout crowns, the presented data have limited direct transfer to the clinical situation. Apicella D, Veltri M, Balleri P, Apicella A, Ferrari M. Influence of abutment material on fracture strength and failure modes of abutment-fixture assemblies when loaded in a bio-faithful simulation. Clin. Oral Impl. Res. , 2011; 182-188. doi: 10.1111/j.1600-0501.2010.01979.x [ABSTRACT FROM AUTHOR]

Abstract: Objectives: In healthy conditions, modeling and remodeling collaborate to obtain a correct shape and function of bones. Loads on bones cause bone strains which generate signals that some cells can detect and respond to. Threshold ranges of such signals are genetically determined and are involved in the control of modeling and remodeling. The present study aimed at assessing the deformations transferred to surrounding bone by endodontically treated maxillary central incisors restored with endocrowns made up of high or low elastic modulus materials. Methods: The solid model consisted of a maxillary central incisor, the periodontal ligament (PDL) and the surrounding cortical and cancellous bone. Both composite and alumina endocrowns were simulated under load and compared to a sound tooth. Dynamic non-linear analyses were performed to validate discretization processes. Non-linear analyses were performed on teeth and surrounding bone to estimate strain variations according to restorative techniques. Results: Strain values in cortical bone, spongy bone, alveolar cortex and tooth were evaluated. PDL allowed models to homogeneously transfer loads to bone. Strains developing in highly rigid restorations were estimated to activate bone modeling and remodeling. Significance: The higher deformability of composites could enable restorative systems to transfer limited strains to compact and spongy bone of tooth socket. Although composites could not prevent the physiological resorption of the alveolar bone, they could successfully reduce strain arising in tooth socket when compared to alumina. The PDL prevented bone to undergo high deformations, resulting in natural flexural movements of teeth. [Copyright &y& Elsevier]

Abstract: Objectives: The present comparative analysis aimed at evaluating which combination of restorative materials resulted in the most homogeneous stress and strain distributions. Methods: A three-dimensional finite element analysis was performed. All the nodes on the external surface of the root were constrained in all directions. Eighteen experimental models with different material properties and configurations were simulated. An arbitrary load of 10N was applied at 60° angle with tooth longitudinal axis on the palatal surface of the crown. Von Mises (equivalent stresses) energetic criterion was chosen. Results: In all the models the values of both strain and stress recorded at the middle third of the buccal aspect of the root surface were at their maxima. On the contrary, the minimum values were noticed at level of both the apical portion of the post and the root apex. The maximum stresses were evidenced at level of the cemento–enamel junction (CEJ) on both the buccal and palatal aspects of root cement and dentin. Stress progressively decreased from the outer to the inner part of the root and from the CEJ towards the incisal margin of the crown as well. Significance: The results of the present study would allow clinicians to make an informed choice from among available materials to restore endodontically treated teeth. [Copyright &y& Elsevier]

Summary: Aim: The present study aimed at providing 3D-FEA engineering tools for the understanding of the influence of tooth preparation design on the stress distribution and localization of critical sites in maxillary central incisors restored by means of alumina porcelain veneers under functional loading. Methods: A 3D-FEM model of a maxillary central incisor is presented. An arbitrary chewing static force of 10N was applied with an angulation of 60 and 125° to the tooth longitudinal axis at the palatal surface of the crown. The model was considered to be restored by means of alumina porcelain veneers with different tooth preparation designs. The differences in occlusal load transfer ability of the two restorative systems are discussed. Results: The maximum Von Mises equivalent stress values were observed in the window restorative system for both 125 and 60° load angulations. When the chamfer with palatal overlap preparation was simulated, the stress distributed uniformly in the cement layer, whereas in the window preparation the stress mainly occurred in the incisal area of the cement layer. Significance: When restoring a tooth by means of porcelain veneers, the chamfer with palatal overlap preparation better restores the natural stress distribution under load than the window technique. [Copyright &y& Elsevier]

Summary: Objectives: To define the inlay shading effect on the polymerization levels and kinetics of a light activated bonding system for an indirect restoration technique. Materials and methods: For the bonding system, an adhesive: Excite (Ivoclar-vivadent) and a composite: Z250 (3M-ESPE, St Paul Minnesota, USA) were investigated. A Demetron (Kerr USA) light curing unit was used. The composite inlay blocks of 2mm thick were used for the experiment (Artglass A2 Heraeus, Kulzer, Dormagen, Germany). The bonding composite was photocured using a 2mm composite inlay block as a shielding system while the adhesive was shielded by a 2.3mm thick wafer, composed of the inlay material and the previously cured bonding composite. The kinetics and levels of polymerization were measured by a differential scanning calorimeter technique (DSC 25, Mettler, Orange, CA, Toledoh, küsnacht, switzerland). Results: The inlay shielded dental composite reaches a significantly lower level of polymerization compared to the unshielded composite. Inlay shielded composite, has a slower polymerization kinetic compared to unshielded composite. The resin adhesive shielded by the inlay-composite wafer reaches polymerization values not significantly different from those of the unshielded adhesive. Significances The degree of cure of the light-cured composite resins for use as a base for indirect composite restorations, may be severely reduced as a result of inlay shielding. [Copyright &y& Elsevier]

Summary: Objectives. A comparative study on the stress distribution in the dentine and cement layer of an endodontically treated maxillary incisor has been carried out by using Finite Element Analysis (FEA). The role of post and cement rigidity on reliability of endodontic restorations is discussed. Methods. A 3D FEM model (13,272 elements and 15,152 nodes) of a central maxillary incisor is presented. A chewing static force of 10N was applied at 125° angle with the tooth longitudinal axis at the palatal surface of the crown. Steel, carbon and glass fiber posts have been considered. The differences in occlusal load transfer ability when steel, carbon and glass posts, fixed to root canal using luting cements of different elastic moduli (7.0 and 18.7GPa) are discussed. Results and significance. The more stiff systems (steel and carbon posts) have been evaluated to work against the natural function of the tooth. Maximum Von Mises equivalent stress values ranging from 7.5 (steel) to 5.4 and 3.6MPa (respectively, for carbon posts fixed with high and low cement moduli) and to 2.2MPa (either for glass posts fixed with high and low cement moduli) have been observed under a static masticatory load of 10N. A very stiff post works against the natural function of the tooth creating zones of tension and shear both in the dentine and at the interfaces of the luting cement and the post. Stresses in static loading do not reach material (dentine and cement) failure limits, however, they significantly differ leading to different abilities of the restored systems to sustain fatigue loading. The influence of the cement layer elasticity in redistributing the stresses has been observed to be less relevant as the post flexibility is increased. [Copyright &y& Elsevier]

A novel hydrogel based on 2-hydroxyethylmethacrylate and fumed silica nanoparticles is presented. The filler was mixed at increasing amount (3–40% w/w) to the organic monomer, before accomplish thermal polymerization. The hybrid composite materials obtained were characterized as far as concern the physical–chemical stability and sorption behaviour in water and water solutions. The novel hybrid hydrogels were compared to poly(hydroxyethylmethacrylate) (pHEMA) on cytocompatibility and ability to elicit cell adhesion and proliferation. These in vitro assays showed that the first ones were supporting cell growth better then pHEMA, moreover experiments on murine fibroblasts showed improved adhesion and proliferation with the increase of the nanomeric filler content. For a more physiological response, the in vitro tests should match biomaterials with cell populations typical of the implant site. Therefore, in view of future applications of these composites as scaffolds for bone engineering, in a successive step of our research we selected primary cultures of human osteoblasts (OB) as the most appropriate models to study the in vitro performance of these materials. The preliminary results obtained confirmed the remarkable improvement of OB adhesion properties of the new hybrids with respect to pure pHEMA. [Copyright &y& Elsevier]

This work reports on the use of Fiber Bragg Grating (FBG) sensors integrated with innovative composite items of aircraft landing gear for strain/stress monitoring. Recently, the introduction of innovative structures in aeronautical applications is appealing with two main goals: (i) to decrease the weight and cost of current items; and (ii) to increase the mechanical resistance, if possible. However, the introduction of novel structures in the aeronautical field demands experimentation and certification regarding their mechanical resistance. In this work, we successfully investigate the possibility to use Fiber Bragg Grating sensors for the structural health monitoring of innovative composite items for the landing gear. Several FBG strain sensors have been integrated in different locations of the composite item including region with high bending radius. To optimize the localization of the FBG sensors, load condition was studied by Finite Element Method (FEM) numerical analysis. Several experimental tests have been done in range 0–70 kN by means of a hydraulic press. Obtained results are in very good agreement with the numerical ones and demonstrate the great potentialities of FBG sensor technology to be employed for remote and real-time load measurements on aircraft landing gears and to act as early warning systems. [ABSTRACT FROM AUTHOR]