Search

In order to develop a more efficient and universal flower auto-transplantation technique, an auto-transplantation mechanism with the integrated function of seedling pick-up and transplanting has been designed. This mechanism involves gear driving and two transplanting arms of the same structure. The gear driving system is made up of one semi-circle gear, four oval planet gears and concave-convex lock-up arc. It aims to move with the non uniform speed through the operation of planet gears and pulling and imbedding of concave-convex lock-up arc. The auto-transplantation arm includes the transplanting claw, convex gear and removing gear-gap parts. It transfers the whirling operation of planet gear into straight-line operation of pick-up seedling. The manual finger scratching and planting were simulated by two pins at the end of the seedling arm. The auto-transplantation mechanism combines the pick-up and planting. The transplanting trajectory and the location of pick-up and planting were special. Thus, it is essential to design new mechanism accordance with the movement of pick-up clip and achieve “Double beak sharp” trajectory. In this paper, we designed a device of bouncing clip to lengthen the trajectory to realize the function of pick-up and planting, and it could facilitate the integration of the planting. At the same time, when the claw moves nearly to the pot seedling, the seedling needle was inserted into the soil with a certain angle of inclination, which could effectively avoid the injury of the seedlings and the interference with the seedling box. Based on the kinematics characteristics of the mechanism, a corresponding mathematic model was established, and the Visual Basic 6.0 software was used to optimize the mechanism parameters. The program was used to analyze the influence of the parameters of mechanism on the trajectory and attitude of the “Double beak sharp". Finally, the best group of mechanism parameters was selected, and then the 3D design and components assembly were carried out based on SolidWorks 2015 software. Importing the 3D model to Adams, the trajectories of seedling needle could be obtained by the kinematics simulation. Finally, the prototype test was carried out and the test trajectory of the prototype was obtained by the test platform. Through the platform, the operation process was recorded by high-speed camera. Therefore, the trajectories of seedling needle could be tracked through the Bestcam picture analysis software. The results were basically the same among the simulation trajectory, the test trajectory of the prototype and the theoretical trajectory, which verified the correctness and feasibility of the design in this paper. Experimental research was carried out using the prototype, “Marigold chrysanthemum” seedlings were selected in the experiment, the basic composition of the pot seedling combines the pearl cave and peat mud, with the water component of 46%, the seedling tray were eight lines and 16 rows, both the length and width of seedling were 31 mm, and depth was 43 mm, and the test seedlings of marigold were 35 days, with the average height of 10 cm. The rotation speed of the mechanism was set as 35 r/min, its mean efficiency was 70 stems per minute. The obtained seedling success rate was 97.27%, while the transplanting success rate was 77.62%. It reflected the practicality of the integrated transplanting mechanism; the research could provide a reference for the key technology of automatic transplanting. [ABSTRACT FROM AUTHOR]

Vegetable pot seedling transplantation has many advantages, such as high survival rate, promoting crop early maturity and improving land use rate. Mechanized transplanting of vegetable can be divided into semi-automatic transplanting and fully-automatic transplanting. Semi-automatic transplanting is mainly carried out by feeding the seedlings into the seedling transplanter manually, which has low efficiency and high labor intensity, and it is not conducive to field operations. At present, the automatic transplanting machine mainly adopts multiple mechanisms to complete a series of actions such as picking up seedling, conveying and planting, but it has the disadvantages of complex structure, high cost and low efficiency. In order to simplify the structure, the way to complete the transplanting operation with a single mechanism is proposed. However, due to the complicated working trajectory of transplanting vegetable seedling and much posture requirements, the transmission ratio of the mechanism is required to be changed greatly, which resulting in the irregular shape of the non-circular gear section of the single planetary gear is not conducive to processing and affects the transmission performance of the gear. A double-planetary non-circular gears linkage of vegetable pot seedling transplanting mechanism is proposed to solve the problem mentioned above in this paper. The transmission part of transplanting mechanism is composed of planetary gear train mechanism and crank rocker mechanism, The main planetary frame rotates at a uniform speed, through the transmission of internal gears and connecting rods, the unequal transmission of non-circular gear system and the periodic variable-speed swing of crank-rocker mechanism are superimposed, which makes the sub-planetary frame swing with respect to the main planetary frame and the transplanting arm rotate with respect to the sub-planetary frame, thus the transmission ratio needed to realize the complex transplanting trajectory and posture is obtained. Non-uniform B-spline curve is applied to fit the pitch curve of non-circular gear to obtain closed, smooth and continuous pitch curves, and the mathematical model of gear train is established based on coordinate transformation theory. Based on the development platform of Matlab, an optimization program is compiled to analyze the effect of transmission case noncircular gear pitch curve and crank rocker mechanism on the shape of trajectory. Further, the effects of the structure and position parameters of the gears and transplanting arm on the target parameters of the transplanting trajectory are analyzed. According to the requirements of 220 mm planting spacing, 120 mm seedling height and 40 mm deep pot for celery transplantation, a set of sharp beak trajectory that satisfies the requirements of the operation posture of picking up seedling and planting is optimized. The optimizing values are that the length of the picking up seedling trajectory is 33 mm, the distance from the lowest point of the trajectory to the lowest point of the planet carrier is 55 mm, the angle of picking up seedlings is 23°, the angle of change in the process of picking up seedlings is 16°, the angle of planting seedlings is 65°, the whole height of the trajectory is 355 mm, and the height of the buckle of the moving trajectory is 125 mm. A three-dimensional model of the mechanism is built and a virtual simulation is performed based on the optimization result. The results show that the simulated trajectory and velocity of the transplanting mechanism are basically consistent with the theoretical results. The trajectory and postures of the transplanting arm are analyzed by a test bench, industrial camera and image processing software. The results show that the trajectory of seedling-taking and seedling-pushing sections coincides with the simulation trajectory basically and the theoretical data, and the error is within 2 mm, which can meet the requirements of transplanting operation, the transplanting mechanism designed is reasonable and feasible. [ABSTRACT FROM AUTHOR]

In order to develop a more efficient and universal flower auto-transplantation technique, an auto-transplantation mechanism with the integrated function of seedling pick-up and transplanting has been designed. This mechanism involves gear driving and two transplanting arms of the same structure. The gear driving system is made up of one semi-circle gear, four oval planet gears and concave-convex lock-up arc. It aims to move with the non uniform speed through the operation of planet gears and pulling and imbedding of concave-convex lock-up arc. The auto-transplantation arm includes the transplanting claw, convex gear and removing gear-gap parts. It transfers the whirling operation of planet gear into straight-line operation of pick-up seedling. The manual finger scratching and planting were simulated by two pins at the end of the seedling arm. The auto-transplantation mechanism combines the pick-up and planting. The transplanting trajectory and the location of pick-up and planting were special. Thus, it is essential to design new mechanism accordance with the movement of pick-up clip and achieve “Double beak sharp” trajectory. In this paper, we designed a device of bouncing clip to lengthen the trajectory to realize the function of pick-up and planting, and it could facilitate the integration of the planting. At the same time, when the claw moves nearly to the pot seedling, the seedling needle was inserted into the soil with a certain angle of inclination, which could effectively avoid the injury of the seedlings and the interference with the seedling box. Based on the kinematics characteristics of the mechanism, a corresponding mathematic model was established, and the Visual Basic 6.0 software was used to optimize the mechanism parameters. The program was used to analyze the influence of the parameters of mechanism on the trajectory and attitude of the “Double beak sharp". Finally, the best group of mechanism parameters was selected, and then the 3D design and components assembly were carried out based on SolidWorks 2015 software. Importing the 3D model to Adams, the trajectories of seedling needle could be obtained by the kinematics simulation. Finally, the prototype test was carried out and the test trajectory of the prototype was obtained by the test platform. Through the platform, the operation process was recorded by high-speed camera. Therefore, the trajectories of seedling needle could be tracked through the Bestcam picture analysis software. The results were basically the same among the simulation trajectory, the test trajectory of the prototype and the theoretical trajectory, which verified the correctness and feasibility of the design in this paper. Experimental research was carried out using the prototype, “Marigold chrysanthemum” seedlings were selected in the experiment, the basic composition of the pot seedling combines the pearl cave and peat mud, with the water component of 46%, the seedling tray were eight lines and 16 rows, both the length and width of seedling were 31 mm, and depth was 43 mm, and the test seedlings of marigold were 35 days, with the average height of 10 cm. The rotation speed of the mechanism was set as 35 r/min, its mean efficiency was 70 stems per minute. The obtained seedling success rate was 97.27%, while the transplanting success rate was 77.62%. It reflected the practicality of the integrated transplanting mechanism; the research could provide a reference for the key technology of automatic transplanting. [ABSTRACT FROM AUTHOR]

In order to develop a more efficient and universal flower auto-transplantation technique, an auto-transplantation mechanism with the integrated function of seedling pick-up and transplanting has been designed. This mechanism involves gear driving and two transplanting arms of the same structure. The gear driving system is made up of one semi-circle gear, four oval planet gears and concave-convex lock-up arc. It aims to move with the non uniform speed through the operation of planet gears and pulling and imbedding of concave-convex lock-up arc. The auto-transplantation arm includes the transplanting claw, convex gear and removing gear-gap parts. It transfers the whirling operation of planet gear into straight-line operation of pick-up seedling. The manual finger scratching and planting were simulated by two pins at the end of the seedling arm. The auto-transplantation mechanism combines the pick-up and planting. The transplanting trajectory and the location of pick-up and planting were special. Thus, it is essential to design new mechanism accordance with the movement of pick-up clip and achieve “Double beak sharp” trajectory. In this paper, we designed a device of bouncing clip to lengthen the trajectory to realize the function of pick-up and planting, and it could facilitate the integration of the planting. At the same time, when the claw moves nearly to the pot seedling, the seedling needle was inserted into the soil with a certain angle of inclination, which could effectively avoid the injury of the seedlings and the interference with the seedling box. Based on the kinematics characteristics of the mechanism, a corresponding mathematic model was established, and the Visual Basic 6.0 software was used to optimize the mechanism parameters. The program was used to analyze the influence of the parameters of mechanism on the trajectory and attitude of the “Double beak sharp". Finally, the best group of mechanism parameters was selected, and then the 3D design and components assembly were carried out based on SolidWorks 2015 software. Importing the 3D model to Adams, the trajectories of seedling needle could be obtained by the kinematics simulation. Finally, the prototype test was carried out and the test trajectory of the prototype was obtained by the test platform. Through the platform, the operation process was recorded by high-speed camera. Therefore, the trajectories of seedling needle could be tracked through the Bestcam picture analysis software. The results were basically the same among the simulation trajectory, the test trajectory of the prototype and the theoretical trajectory, which verified the correctness and feasibility of the design in this paper. Experimental research was carried out using the prototype, “Marigold chrysanthemum” seedlings were selected in the experiment, the basic composition of the pot seedling combines the pearl cave and peat mud, with the water component of 46%, the seedling tray were eight lines and 16 rows, both the length and width of seedling were 31 mm, and depth was 43 mm, and the test seedlings of marigold were 35 days, with the average height of 10 cm. The rotation speed of the mechanism was set as 35 r/min, its mean efficiency was 70 stems per minute. The obtained seedling success rate was 97.27%, while the transplanting success rate was 77.62%. It reflected the practicality of the integrated transplanting mechanism; the research could provide a reference for the key technology of automatic transplanting. [ABSTRACT FROM AUTHOR]

In order to develop a more efficient and universal flower auto-transplantation technique, an auto-transplantation mechanism with the integrated function of seedling pick-up and transplanting has been designed. This mechanism involves gear driving and two transplanting arms of the same structure. The gear driving system is made up of one semi-circle gear, four oval planet gears and concave-convex lock-up arc. It aims to move with the non uniform speed through the operation of planet gears and pulling and imbedding of concave-convex lock-up arc. The auto-transplantation arm includes the transplanting claw, convex gear and removing gear-gap parts. It transfers the whirling operation of planet gear into straight-line operation of pick-up seedling. The manual finger scratching and planting were simulated by two pins at the end of the seedling arm. The auto-transplantation mechanism combines the pick-up and planting. The transplanting trajectory and the location of pick-up and planting were special. Thus, it is essential to design new mechanism accordance with the movement of pick-up clip and achieve “Double beak sharp” trajectory. In this paper, we designed a device of bouncing clip to lengthen the trajectory to realize the function of pick-up and planting, and it could facilitate the integration of the planting. At the same time, when the claw moves nearly to the pot seedling, the seedling needle was inserted into the soil with a certain angle of inclination, which could effectively avoid the injury of the seedlings and the interference with the seedling box. Based on the kinematics characteristics of the mechanism, a corresponding mathematic model was established, and the Visual Basic 6.0 software was used to optimize the mechanism parameters. The program was used to analyze the influence of the parameters of mechanism on the trajectory and attitude of the “Double beak sharp". Finally, the best group of mechanism parameters was selected, and then the 3D design and components assembly were carried out based on SolidWorks 2015 software. Importing the 3D model to Adams, the trajectories of seedling needle could be obtained by the kinematics simulation. Finally, the prototype test was carried out and the test trajectory of the prototype was obtained by the test platform. Through the platform, the operation process was recorded by high-speed camera. Therefore, the trajectories of seedling needle could be tracked through the Bestcam picture analysis software. The results were basically the same among the simulation trajectory, the test trajectory of the prototype and the theoretical trajectory, which verified the correctness and feasibility of the design in this paper. Experimental research was carried out using the prototype, “Marigold chrysanthemum” seedlings were selected in the experiment, the basic composition of the pot seedling combines the pearl cave and peat mud, with the water component of 46%, the seedling tray were eight lines and 16 rows, both the length and width of seedling were 31 mm, and depth was 43 mm, and the test seedlings of marigold were 35 days, with the average height of 10 cm. The rotation speed of the mechanism was set as 35 r/min, its mean efficiency was 70 stems per minute. The obtained seedling success rate was 97.27%, while the transplanting success rate was 77.62%. It reflected the practicality of the integrated transplanting mechanism; the research could provide a reference for the key technology of automatic transplanting. [ABSTRACT FROM AUTHOR]

In order to develop a more efficient and universal flower auto-transplantation technique, an auto-transplantation mechanism with the integrated function of seedling pick-up and transplanting has been designed. This mechanism involves gear driving and two transplanting arms of the same structure. The gear driving system is made up of one semi-circle gear, four oval planet gears and concave-convex lock-up arc. It aims to move with the non uniform speed through the operation of planet gears and pulling and imbedding of concave-convex lock-up arc. The auto-transplantation arm includes the transplanting claw, convex gear and removing gear-gap parts. It transfers the whirling operation of planet gear into straight-line operation of pick-up seedling. The manual finger scratching and planting were simulated by two pins at the end of the seedling arm. The auto-transplantation mechanism combines the pick-up and planting. The transplanting trajectory and the location of pick-up and planting were special. Thus, it is essential to design new mechanism accordance with the movement of pick-up clip and achieve “Double beak sharp” trajectory. In this paper, we designed a device of bouncing clip to lengthen the trajectory to realize the function of pick-up and planting, and it could facilitate the integration of the planting. At the same time, when the claw moves nearly to the pot seedling, the seedling needle was inserted into the soil with a certain angle of inclination, which could effectively avoid the injury of the seedlings and the interference with the seedling box. Based on the kinematics characteristics of the mechanism, a corresponding mathematic model was established, and the Visual Basic 6.0 software was used to optimize the mechanism parameters. The program was used to analyze the influence of the parameters of mechanism on the trajectory and attitude of the “Double beak sharp". Finally, the best group of mechanism parameters was selected, and then the 3D design and components assembly were carried out based on SolidWorks 2015 software. Importing the 3D model to Adams, the trajectories of seedling needle could be obtained by the kinematics simulation. Finally, the prototype test was carried out and the test trajectory of the prototype was obtained by the test platform. Through the platform, the operation process was recorded by high-speed camera. Therefore, the trajectories of seedling needle could be tracked through the Bestcam picture analysis software. The results were basically the same among the simulation trajectory, the test trajectory of the prototype and the theoretical trajectory, which verified the correctness and feasibility of the design in this paper. Experimental research was carried out using the prototype, “Marigold chrysanthemum” seedlings were selected in the experiment, the basic composition of the pot seedling combines the pearl cave and peat mud, with the water component of 46%, the seedling tray were eight lines and 16 rows, both the length and width of seedling were 31 mm, and depth was 43 mm, and the test seedlings of marigold were 35 days, with the average height of 10 cm. The rotation speed of the mechanism was set as 35 r/min, its mean efficiency was 70 stems per minute. The obtained seedling success rate was 97.27%, while the transplanting success rate was 77.62%. It reflected the practicality of the integrated transplanting mechanism; the research could provide a reference for the key technology of automatic transplanting. [ABSTRACT FROM AUTHOR]

To improve the efficiency of mechanization in transplanting vegetable seedlings and achieve the automation of vegetable transplanter in dry land, an automatic vegetable pot seedling transplanter for dry land was developed. This transplanter is mainly composed of 2 rotating seedling picking-up mechanisms of planetary gear train with ellipse gears and incomplete non-circular gears, a horizontal and longitudinal intermittent seedling sending device, 2 eccentric disc dibble-type planting apparatuses, and a power transmission system. Two rotating seedling picking-up devices and 2 eccentric disc dibble-type planting apparatuses were symmetrically arranged along the longitudinal surface center of the machine, constituting 2 sets of automatic seedling picking-up and planting systems. The seedlings were provided automatically from 2 standard seedling pots with 128 holes using the horizontal and longitudinal intermittent seedling sending device. The engine drive shaft could transfer power to the principal axis of the apparatus through chain drive to enable the rotating and planting of the apparatus. Meanwhile, the principal axis of the apparatus could transfer the power to the rotating seedling picking-up mechanisms of planetary gear train with ellipse gears and incomplete non-circular gear and intermittent seedling sending device. Subsequently the intermittent seedling sending device could move horizontally and longitudinally to send the seedling pots to the target place, where the seedling picking-up mechanism took the seedlings from the pot to the eccentric disc dibble-type planting apparatus. To test the performance of this automatic vegetable pot seedling transplanter for dry land, the experiments were conducted in the test field where the soil condition met the mechanical industry standard in People's Republic of China Dry Land Planting Machinery (JB/T 10291-2013). The tomato seedlings (ZheZa 809) used in this experiment were cultivated in the standard seedling pots with 128 holes and transplanted at the age of 35 days with an average height of 150 mm. The seedling sending, picking-up, delivering and planting were all carried out at a constant transplanting frequency by adjusting the speed of the input belt pulley of the walking gear-box. The seedling transplanting efficiency was tested at the low speeds of 45, 60, 75 and 84 plants/min, respectively, as well as at the high speed of 96 plants /min. The coefficient of variation for planting spacing, missing transplanting rate, qualified rate of planting depth and qualified rate of transplanting were determined according to the mechanical industry standard Dry Land Planting Machinery (JB/T10291-2013). The seedling-standing ratio was calculated based on the Technical Specifications of Quality Evaluation for Rape Transplanter (NY/T 1924-2010) according to the standards for agriculture industry in People's Republic of China. The results showed that the coefficient of variation for planting spacing and the missing transplanting rate increased slightly at the range of 6.6%-8.9% and 1.7%-2.8% accordingly when increasing the planting frequency from 45 to 96 plants/min. However, the qualified rate of planting depth, the qualified rate of planting perpendicularity and the qualified rate of transplanting decreased slightly in the range of 97.5%-98.9%, 96.7%-97.8%, and 91.1%-94.7% with the increasing of planting frequency. The coefficient of variation for planting spacing, the missing transplanting rate, the qualified rate of planting depth and the qualified rate of planting all met the requirements of the machinery industry standards (JB/T 10291-2013), and the qualified rate of planting perpendicularity was also within the specified value in the standards for agriculture industry (NY/T 1924-2010). The automatic seedling-sending device, the seedling picking-up device and the planting apparatus of the automatic transplanter coordinated well with each other to complete the process for sending seedlings, picking up seedlings, delivering seedling, planting and soil covering automatically. [ABSTRACT FROM AUTHOR]