Search

We describe a new superconductive three-terminal device that acts as a fast pulse amplifier and discriminator. The device is based on a parallel nano-wire configuration. The nano-wires are properly biased near their critical current. When a current pulse of sufficient amplitude is injected into one of the wires, a transition to the normal state of all the wires occurs, thus generating a large output current pulse. This device could be used as a pulse amplifier for signals generated by nano-wire detectors or by RSFQ circuits. The parallel nano-wire structure can be realized with the same fabrication process used for NbN Superconducting Single Photon Detector (SSPD), so its integration into the existing technology is straightforward. Here we present numerical simulations of the device, with special attention to circuit requirement for the correct operation. [ABSTRACT FROM AUTHOR]

Cascade switch superconducting nanowire single photon detectors has been fabricated of ultrathin NbN films deposited by DC-magnetron sputtering at room temperature on MgO substrates. Detectors using 4 to 24 nanowires in parallel, having an area coverage of 5 × 6 μm2 and a filling factor of 40%, have been investigated. Signal amplitudes increase with the number of parallel nanowires and reaches 12.3 mV with a signal noise of 20 μV. The range of bias currents where the detectors emit signal pulses also increase with the, number of parallel nanowires and exceeds the nanowire critical current. [ABSTRACT FROM AUTHOR]