Search

Relict landforms provide a wealth of information on the evolution of the modern landscape and climate change in the past. To improve understanding of the origin and development of these landforms we need better spatial measurements across a variety of scales. This can be challenging using conventional surveying techniques due to difficulties in landform recognition on the ground (e.g. weak visual/topographic expression) and spatially variable areas of interest. Here we explore the appropriateness of existing remote sensing datasets (aerial LiDAR and aerial photography) and newly acquired unmanned aerial vehicle (UAV) imagery of a test site on the upland of Dartmoor in SW England (Leeden Tor) for the recognition and automated mapping of relict patterned ground composed of stripes and polygons. We find that the recognition of these landforms is greatly enhanced by automated mapping using spectral two-dimensional imagery. Image resolution is important, with the recognition of elements (boulders) of <1 m maximised from the highest resolution imagery (UAV red-green-blue (RGB)) and recognition of landforms (10–100 m scale) maximised on coarser resolution aerial imagery. Topographic metrics of these low relief (0.5 m) landforms are best extracted from structure-from-motion (SfM) processed UAV true-colour imagery, and in this context the airborne LiDAR data proved less effective. Integrating automated mapping using spectral attributes and SfM-derived digital surface models from UAV RGB imagery provides a powerful tool for rapid reconnaissance of field sites to facilitate the extraction of meaningful topographic and spatial metrics that can inform on the origin of relict landform features. Care should be given to match the scale of features under consideration to the appropriate scale of datasets available. [ABSTRACT FROM AUTHOR]

Terrestrial laser scanning (TLS) and structure-from-motion photogrammetry (SfMp) offer rapid, non-invasive surveying of in situ gravels. Numerous studies have used the point clouds derived from TLS or SfMp to quantify surface layer characteristics, but direct comparison of the methods for grain-scale analysis has received relatively little attention to date. Comparing equivalent products of different data capture methods is critical as differences in errors and sampling biases between the two methods may produce different outputs, effecting further analysis. The sampling biases and errors related to SfMp and TLS lead to differences in the point clouds produced by each method. The metrics derived from the point clouds are therefore likely to differ, potentially leading to different inputs for entrainment threshold models, different trends in surface layer development being identified and different trajectories for physical processes and habitat quality being predicted. This paper provides a direct comparison between TLS and SfMp surveys of an exposed gravel bar for three different survey periods following inundation and reworking of the bar surface during high flow events. The point clouds derived from the two methods are used to describe changes in the character of the surface layer between bar inundation events, and comparisons are made with descriptions derived from conventional pebble counts. The results found differences in the metrics derived using each method do exist, but the grid resolution used to detrend the surfaces and identify spatial variations in surface layer characteristics had a greater impact than survey method. Further research is required to understand the significance of these variations for quantifying surface texture and structure and for predicting entrainment thresholds and transport rates. [ABSTRACT FROM AUTHOR]

Structure-from-motion (SfM) photogrammetry techniques are now widely available to generate digital terrain models (DTMs) from optical imagery, providing an alternative to costlier options such as LiDAR or satellite surveys. SfM could be a useful tool in hazard studies because its minimal cost makes it accessible even in developing regions and its speed of use can provide updated data rapidly in hazard-prone regions. Our study is designed to assess whether crowd-sourced SfM data is comparable to an industry standard LiDAR dataset, demonstrating potential real-world use of SfM if employed for disaster risk reduction purposes. Three groups with variable SfM knowledge utilized 16 different camera models, including four camera phones, to collect 1001 total photos in one hour of data collection. Datasets collected by each group were processed using VisualSFM, and the point densities, accuracies and distributions of points in the resultant point clouds (DTM skeletons) were compared. Our results show that the point clouds are resilient to inconsistency in users' SfM knowledge: crowd-sourced data collected by a moderately informed general public yields topography results comparable in data density and accuracy to those produced with data collected by highly-informed SfM users or experts using LiDAR. This means that in a real-world scenario involving participants with a diverse range of expertise, topography models could be produced from crowd-sourced data quite rapidly and to a very high standard. This could be beneficial to disaster risk reduction as a relatively quick, simple and low-cost method to attain rapidly updated knowledge of terrain attributes, useful for the prediction and mitigation of many natural hazards. [ABSTRACT FROM AUTHOR]

Piton de la Fournaise is one of the world's most active and visited volcanoes. Its summit crater (Cratère Dolomieu), the main tourist attraction, underwent a major caldera collapse in 2007 and its rim is not yet stabilized. In order to assess the caldera rim instability risk for visitors, we followed its structural evolution from 2007 to 2015. Using aerial photogrammetry campaigns, we mapped the unstable sites very precisely, carried out a quantitative analysis of the temporal evolution of these instabilities, and assessed the risks for visitors. Considering the 2008–2015 period, four sites close to the crater's edge showed significant horizontal ground motion (0.5–2 m), fracture widening (average of 0.3–0.56 m) and large-scale mass wasting volumes (total of 1.8±0.1 × 106 m3). We infer two different processes at work: (1) to the west and north, toppling of the basalt units occurs after periods of fracture widening due to the combined effect of magmatic intrusions and long-term inflation/deflation cycles; (2) to the south and east, parts of the caldera rim slowly slide towards the caldera centre, with significant accelerations during periods of enhanced volcanic activity (in 2008–2010 and 2014–2015). The official observation platform is the most stable zone to overlook the Cratère Dolomieu. By contrast, the most frequently visited area of the rim (northwest) outside the official platform is also the most unstable. [ABSTRACT FROM AUTHOR]

• UAV-SfM soil loss measurements were validated by direct sediment collection. • Photogrammetric precision estimates defined spatially variable levels of detection. • DEMs of difference illustrated the diffuse erosion patterns through time. • Accurate 3-D soil surface models were constructed from UAV-SfM data. Sheet erosion is common on agricultural lands, and understanding the dynamics of the erosive process as well as the quantification of soil loss is important for both soil scientists and managers. However, measuring rates of soil loss from sheet erosion has proved difficult due to requiring the detection of relatively small surface changes over extended areas. Consequently, such measurements have relied on the use of erosion plots, which have limited spatial coverage and have high operating costs. For measuring the larger erosion rates characteristic of rill and gully erosion, structure-from-motion (SfM) photogrammetry has been demonstrated to be a valuable tool. Here, we demonstrate the first direct validation of UAV-SfM measurements of sheet erosion using sediment collection data collected from erosion plots. Three erosion plots (12 m × 4 m) located at Lavras, Brazil, with bare soil exposed to natural rainfall from which event sediment and runoff was monitored, were mapped during two hydrological years (2016 and 2017), using a UAV equipped with a RGB camera. DEMs of difference (DoD) were calculated to detect spatial changes in the soil surface topography over time and to quantify the volumes of sediments lost or gained. Precision maps were generated to enable precision estimates for both DEMs to be propagated into the DoD as spatially variable vertical uncertainties. The point clouds generated from SfM gave mean errors of ~2.4 mm horizontally (xy) and ~1.9 mm vertically (z) on control and independent check points, and the level of detection (LoD) along the plots ranged from 1.4 mm to 7.4 mm. The soil loss values obtained by SfM were significantly (p < 0.001) correlated (r2 = 95.55%) with those derived from the sediment collection. These results open up the possibility to use SfM for erosion studies where channelized erosion is not the principal mechanism, offering a cost-effective method for gaining new insights into sheet, and interrill, erosion processes. [ABSTRACT FROM AUTHOR]

This contribution reviews the use of modern 3D photo-based surface reconstruction techniques for high fidelity surveys of trenches, rock exposures and hand specimens to highlight their potential for paleoseismology and structural geology. We outline the general approach to data acquisition and processing using ground-based photographs acquired from standard DSLR cameras, and illustrate the use of similar processing approaches on imagery from Unmanned Aerial Vehicles (UAVs). It is shown that digital map and trench data can be acquired at ultra-high resolution and in much shorter time intervals than would be normally achievable through conventional grid mapping. The resulting point clouds and textured models are inherently multidimensional ( x , y , z , point orientation, colour, texture), archival and easily transformed into orthorectified photomosaics or digital elevation models (DEMs). We provide some examples for the use of such techniques in structural geology and paleoseismology while pointing the interested reader to free and commercial software packages for data processing, visualization and 3D interpretation. Photogrammetric models serve to act as an ideal electronic repository for critical outcrops and observations, similar to the electronic lab book approach employed in the biosciences. This paper also highlights future possibilities for rapid semi-automatic to automatic interpretation of the data and advances in technology. [ABSTRACT FROM AUTHOR]