Search

Data assimilation techniques allow researchers to optimally merge remote sensing observations in ecohydrological models, guiding them for improving land surface fluxes predictions. Presently, freely available remote sensing products, such as those of Sentinel 1 radar, Landsat 8 sensors, and Sentinel 2 sensors, allow the monitoring of land surface variables (e.g., radar backscatter for soil moisture and the normalized difference vegetation index (NDVI) and for leaf area index (LAI)) at unprecedentedly high spatial and time resolutions, appropriate for heterogeneous ecosystems, typical of semiarid ecosystems characterized by contrasting vegetation components (grass and trees) competing for water use. A multiscale assimilation approach that assimilates radar backscatter and grass and tree NDVI in a coupled vegetation dynamic–land surface model is proposed. It is based on the ensemble Kalman filter (EnKF), and it is not limited to assimilating remote sensing data for model predictions, but it uses assimilated data for dynamically updating key model parameters (the ENKFdc approach), including saturated hydraulic conductivity and grass and tree maintenance respiration coefficients, which are highly sensitive parameters of soil–water balance and biomass budget models, respectively. The proposed EnKFdc assimilation approach facilitated good predictions of soil moisture, grass, and tree LAI in a heterogeneous ecosystem in Sardinia for a 3-year period with contrasting hydrometeorological (dry vs. wet) conditions. Contrary to the EnKF-based approach, the proposed EnKFdc approach performed well for the full range of hydrometeorological conditions and parameters, even assuming extremely biased model conditions with very high or low parameter values compared with the calibrated ("true") values. The EnKFdc approach is crucial for soil moisture and LAI predictions in winter and spring, key seasons for water resources management in Mediterranean water-limited ecosystems. The use of ENKFdc also enabled us to predict evapotranspiration and carbon flux well, with errors of less than 4% and 15%, respectively; such results were obtained even with extremely biased initial model conditions. [ABSTRACT FROM AUTHOR]

Spatiotemporal distribution of soil moisture is important for hydrometeorological and agricultural applications. There is growing interest in monitoring soil moisture in relation to soil- and land-based natural flood management (NFM), to understand the soil’s ability, via land-use and management changes, and to delay the arrival of flood peaks in nearby watercourses. This article monitors relative surface soil moisture (rSSM) across the Thames Valley, U.K., using Sentinel-1 data, and the Vienna University of Technology (TU-Wien) Change Detection Algorithm, with a novel exploration of monthly and annual normalization factors and spatial averaging. Two pairs of normalization factors are introduced to remove impacts from varying local incidence angles through direct and multiple regression slopes. The spatiotemporal distribution of rSSM values at various spatial resolutions (1000, 500, 250, and 100 m) is assessed. Comparisons with in situ soil moisture data from the COSMOS-UK network show that, while general temporal trends agree, the difference in effective depth of measurements, coupled with vegetation impacts during the growing season, makes comparison with soil moisture observations difficult. Temporal rSSM trends can be retrieved at spatial resolutions down to 100 m, and the rSSM RMSE was found to decrease as the spatial resolution increases. The vegetation effects upon the rSSM are further explored by comparing the two dominant land cover types: Arable and Horticulture, and Improved Grassland. It was found that, while the rSSM retrieval for these land covers was possible, and the general soil moisture trend is clear, overlying vegetation during the summer artificially increased the rSSM values. [ABSTRACT FROM AUTHOR]

Remote sensing based retrieved of soil moisture from low frequency passive microwave observations is preferred in different aspects such as better spatial coverage and more measurement compared to traditional ground-based measurements. However, due to coarse spatial resolution of the observations, their applications are limited in local to regional studies. This paper provides a framework using random forest regression to disaggregate the daily SMAP enhanced soil moisture (SPL3SMP_E) utilizing several ancillary data to overcome the spatial resolution limits and cloudiness effects. Ancillaries were acquired from sentinel-1 radar, MODIS monthly NDVI, land cover, topography, and surface soil properties. To validate the downscaled results with 1-km spatial resolution, the OZNET soil moisture measurements and sparse TDR ground soil moisture measurements were collected from Murrumbidgee catchment (Australia) and Firozabad catchment (Iran), respectively. Downscaled soil moisture product unbiased root-mean-square error (UnbRMSE) of ensemble learning demonstrated a range of 0.023 and –0.07 cm3/cm3. The produced downscaled soil moisture exhibited better local heterogeneity when compared to the coarse data and tracked the dynamics of temporal changes in soil moisture. Furthermore, cumulative distribution function (CDF) analysis showed good accuracy of downscaled soil moisture in grassland and cropland. Taken together, the findings supported usefulness of the suggested methodology in downscaling the medium- resolution SMAP soil moisture product. [ABSTRACT FROM AUTHOR]

Irrigation can be responsible for salt accumulation in the root zone of grapevines when late autumn and winter precipitation is not enough to leach salts from the soil upper horizons, turning the soil unsuitable for grape production. The aim of this work is to present a novel methodology to outline areas, within a drip-irrigated vineyard, with a low soil moisture content (SMC) during, and after, an 11-month agricultural drought. Soil moisture (SM) field measurements were performed in two plots at the vineyard, followed by a geostatistical method (indicator kriging) to estimate the SM class probabilities according to a threshold value, enlarging the training set for the classification algorithms. The logistic regression (LR) and Random Forest (RF) methods used the features of the Sentinel-1 and Sentinel-2 images and terrain parameters to classify the SMC probabilities at the vineyard. Both methods classified the highest SMC probabilities above 14% that is located close to the stream at the lower altitudes. The RF method performed very well in classifying the topsoil zones with a lower SMC during the autumn-winter period. This delineation allows the prevention of the occurrence of areas affected by salinisation, indicating which areas will need irrigation management strategies to control the salinity, especially under climate change, and the expected increase in droughts. [ABSTRACT FROM AUTHOR]

The 40 km resolution SMOS (Soil Moisture and Ocean Salinity) soil moisture, previously disaggregated at a 1 km resolution using the DISPATCH (DISaggregation based on Physical And Theoretical scale CHange) method based on MODIS optical/thermal data, is further disaggregated to 100 m resolution using Sentinel-1 backscattering coefficient (σº). For this purpose, three distinct radar-based disaggregation methods are tested by linking the spatio-temporal variability of σº and soil moisture data at the 1 km and 100 m resolution. The three methods are: (1) the weight method, which estimates soil moisture at 100 m resolution at a certain time as a function of σº ratio (100 m to 1 km resolution) and the 1 km DISPATCH products of the same time; (2) the regression method which estimates soil moisture as a function of σº where the regression parameters (e.g., intercept and slope) vary in space and time; and (3) the Cumulative Distribution Function (CDF) method, which estimates 100 m resolution soil moisture from the cumulative probability of 100 m resolution backscatter and the maximum to minimum 1 km resolution (DISPATCH) soil moisture difference. In each case, disaggregation results are evaluated against in situ measurements collected between 1 January 2016 and 11 October 2016 over a bare soil site in central Morocco. The determination coefficient (R²) between 1 km resolution DISPATCH and localized in situ soil moisture is 0.31. The regression and CDF methods have marginal effect on improving the DISPATCH accuracy at the station scale with a R² between remotely sensed and in situ soil moisture of 0.29 and 0.34, respectively. By contrast, the weight method significantly improves the correlation between remotely sensed and in situ soil moisture with a R² of 0.52. Likewise, the soil moisture estimates show low root mean square difference with in situ measurements (RMSD = 0.032 m³ m-3). [ABSTRACT FROM AUTHOR]

Soil moisture (SM) data are required at high spatio-temporal resolution—typically the crop field scale every 3–6 days—for agricultural and hydrological purposes. To provide such high-resolution SM data, many remote sensing methods have been developed from passive microwave, active microwave and thermal data. Despite the pros and cons of each technique in terms of spatio-temporal resolution and their sensitivity to perturbing factors such as vegetation cover, soil roughness and meteorological conditions, there is currently no synergistic approach that takes advantage of all relevant (passive, active microwave and thermal) remote sensing data. In this context, the objective of the paper is to develop a new algorithm that combines SMAP L-band passive microwave, MODIS/Landsat optical/thermal and Sentinel-1 C-band radar data to provide SM data at the field scale at the observation frequency of Sentinel-1. In practice, it is a three-step procedure in which: (1) the 36 km resolution SMAP SM data are disaggregated at 100 m resolution using MODIS/Landsat optical/thermal data on clear sky days, (2) the 100 m resolution disaggregated SM data set is used to calibrate a radar-based SM retrieval model and (3) the so-calibrated radar model is run at field scale on each Sentinel-1 overpass. The calibration approach also uses a vegetation descriptor as ancillary data that is derived either from optical (Sentinel-2) or radar (Sentinel-1) data. Two radar models (an empirical linear regression model and a non-linear semi-empirical formulation derived from the water cloud model) are tested using three vegetation descriptors (NDVI, polarization ratio (PR) and radar coherence (CO)) separately. Both models are applied over three experimental irrigated and rainfed wheat crop sites in central Morocco. The field-scale temporal correlation between predicted and in situ SM is in the range of 0.66–0.81 depending on the retrieval configuration. Based on this data set, the linear radar model using PR as a vegetation descriptor offers a relatively good compromise between precision and robustness all throughout the agricultural season with only three parameters to set. The proposed synergistical approach combining multi-resolution/multi-sensor SM-relevant data offers the advantage of not requiring in situ measurements for calibration. [ABSTRACT FROM AUTHOR]