Search

The accumulation efficiency and the properties of polyhydroxyalkanoates (PHAs) produced from acidified waste glycerol (AWG) and its derivatives via an enriched microbial consortium derived from soil, were investigated in this study. AWG consisted mainly from short chain fatty acids, 1,3 propanediol and residual glycerol, which were also evaluated individually as substrates. Accumulation capacity and yields were estimated after solvent extraction and purification and PHAs were further analyzed in terms of their chemical structure, thermal properties, molecular masses and mechanical properties. The lowest accumulation capacity was noticed for non-acidified waste glycerol as carbon source which led to the generation of P(3HB), whereas for the other carbon sources co -polymers of 3HB with 3HV or 3HHx were produced. Average molecular mass weights were quite high in all cases reaching ~1.8 × 10 6 Da. The thermal properties and the mechanical behavior of PHAs were shown to be highly affected by their monomeric composition, whereas it was also concluded that DSC and DMA results were in good agreement. [ABSTRACT FROM AUTHOR]

As an easily obtained organic waste, by-product acetic acid could be an appropriate co-substrate with blue algae wastes (increase C/N ratio of substrates) for co-fermentation of PHA production. However, there are still acrylic acid and other chemicals in by-product acetic acid, which could cause severe inhibition for fermenting microorganisms during PHA production process. The current study represented that alkali pretreatment (pH level of 12) is a more favorable method compared with thermal pretreatment (80 ℃ for 30 min) for breaking cell walls of blue algae. It seemed that there was no synergistic effect of the combination of thermal and alkali pretreatment methods (temperature of 80 ℃ and pH level of 12). Optimal parameters during electro-fenton process for removal of inhibitors in by-product acetic acid were under current of 0.5 A, pH level of 3 and reaction time of 120 min. Both the highest dry weight of PHA and PHA concentration were achieved by applying blue algae and by-product acetic acid (after pretreatment) as co-substrates (mixed ratio of 3:1, stirring speed of 200 r/min, 24 h), indicating that using by-product acetic acid (after pretreatment) as co-substrate could increase C/N ratio and promote PHA production successfully. The current study could offer new insights for improving PHA production by co-fermentation. [Display omitted] • Alkali pretreatment is a more favorable method compared with thermal pretreatment. • There was no synergistic effect of the combination of thermal and alkali pretreatment. • Optimal parameters for removal of inhibitors in by-product acetic acid were determined. • By-product acetic acid (after pretreatment) as co-substrate could promote PHA production. [ABSTRACT FROM AUTHOR]

In the current study, a mixed microbial culture (MMC) of polyhydroxyalkanoates (PHAs) producers was developed under nutrient stress and was assessed as biocatalyst for the production of high-yielding PHAs from fermented (acidified) discarded fruit juices (DFJ). The structure of the MMC was analyzed periodically to determine its microbial dynamics, revealing that Zoogloae sp. dominated throughout the operation of the system. The efficiency of PHAs production from the MMC was further optimized in batch mode by altering the ratio of C to N, the ratio of carbon sources (propionate and butyrate), and the initial pH, and subsequently different fermentation mixtures of acidified DFJ were assessed as substrates at optimal conditions. Upon solvent extraction, the properties of recovered PHAs were analyzed, showing that in all cases P(3HB-co-3HV) was produced, with T m ranging from 90.5 to 168.8 °C, and maximum obtained yields 54.61 ± 4.31 % and 43.27 ± 2.13 %, from synthetic substrates and DFJ, respectively. Overall, it was shown that the developed MMC can be efficiently applied as biocatalyst for the exploitation of sugary wastewaters, such as DFJ, towards bio-based and biodegradable plastics bearing the required properties to substitute fossil plastics, into the concept of a circular economy. • A PHAs producing consortium dominated by Zoogloae was developed under nutrient stress. • The accumulation capacity of the consortium excided 50 % g PHAs/g dry biomass. • Random copolymers of HB and HV were synthesized from organic acids and acidified juices. • The HV content of the copolymers was linked to the propionate content of the substrate. [ABSTRACT FROM AUTHOR]

The scope of the current study was to investigate the efficiency of a two-stage anaerobic-aerobic process for the simultaneous treatment and valorization of selective wastewater streams from a confectionary industry. The specific wastewater (confectionary industry wastewater, CIW) was a mixture of the rinsing eluting during washing of the cauldrons in which jellies and syrups were produced, and contained mainly readily fermentable sugars, being thus of high organic load. The first stage of the process was the dark fermentation (DF) of the CIW in continuous, attached-biomass systems, in which the effect on hydrogen yields and distribution of metabolites were studied for different packing materials (ceramic or plastic), hydraulic retention times, HRTs (12 h–30 h) and feed substrate concentration (20 g COD/L- 50 g COD/L). In the second stage, the effectiveness of the aerobic treatment of the DF effluents was evaluated in terms of the reduction of the organic load and the production of polyhydroxyalkanoates (PHAs) through an enriched mixed microbial culture (MMC). The MMC was developed in a continuous draw and fill system, in which the accumulation potential of PHAs was studied. It was shown that the hydrogen production rates decreased for increasing substrate concentration and HRTs, with a maximum of 12.70 ± 0.35 m3 H 2 /m3 initial CIW achieved for the lowest HRT and feed concentration and using ceramic beads as packing material. Butyrate, acetate and lactate were the main metabolites generated in all cases, in different ratios. The distribution of metabolites during DF was shown to highly affect the efficiency of the second process in terms of both the reduction of organic load and the PHAs yields. The highest removal of organic load achieved after 48 h of aerobic treatment was 84.0 ± 0.9 %, whereas the maximum PHAs yield was 21.46 ± 0.13 kg PHAs/m3 initial CIW. • The simultaneous treatment and valorization of confectionary wastewater was assessed via an anaerobic-aerobic process. • The operational optimization of the anaerobic stage and the biocatalysts of the aerobic stage are equally important. • The hydrogen yields and distribution of the metabolites are mainly affected by the feeding strategy. • Up to 12.70 ± 0.35 m3 H 2 /m3 initial wastewater and 21.46 ± 0.13 kg PHAs/m3 initial wastewater were produced. • Efficient reduction up to ∼90% of its organic load was achieved by the two stage process. [ABSTRACT FROM AUTHOR]

The treatment and biotechnological exploitation of expired fruit juices (EFJ) towards biohydrogen, polyhydroxyalkanoates (PHAs) and lipids production was investigated. The EFJ were initially fermented via an acidogenic consortium, during which the effect of the organic loading rate (OLR, 20–40 g sugars/L.d) on the sugars uptake and the yields of metabolites i.e. hydrogen, volatile fatty acids (VFAs) and lactate, was studied. The increase of the OLR resulted to lower bioconversion of sugars and metabolic shift to lactate production, whereas the highest hydrogen yield, 10.83 ± 0.41 L H 2 /m3 EFJ, was obtained for the OLR 30 g sugars/L.d. The acidogenic effluents were then utilized for the production of PHAs and microbial lipids, via bacterial heterotrophic and cyanobacterial consortia, respectively. The PHAs produced were in all cases copolymers, and the highest yield, 20.69 ± 1.01 kg PHAs/m3 EFJ was achieved from the effluent with the highest VFAs content. Microbial lipids were also successfully produced from all effluents. The results revealed that low VFAs and high sugars concentration, allowed cyanobacterial growth of up to 373.5 mg /L.d and maximum lipid content of up to 11.7 % d.w. (5.47 ± 0.49 kg biolipids/m3 EFJ), as well as significant substrate degradation (dissolved oxygen demand - d-COD, total nitrogen-ΤΝ, orthophosphates-PO 4 3-, total sugars up to about 93 %, 95 %, 67 % and 96 %, respectively). • The simultaneous treatment and valorization of expired fruit juices (EFJ) was investigated. • The organic loading during continuous dark fermentation of EFJ affected products' yields. • Effluents with high amount of volatile fatty acids yielded to high PHAs. • Effluents with high amount of residual sugars yielded to high microbial lipids. • The utilization strategy of the effluents may vary based on their composition. [ABSTRACT FROM AUTHOR]

PHAs are a form of cellular storage polymers with diverse structural and material properties, and their biodegradable and renewable nature makes them a potential green alternative to fossil fuel-based plastics. PHAs are obtained through extraction via various mechanical, physical and chemical processes after their intracellular synthesis. Most studies have until now focused on pure cultures, while information on mixed microbial cultures (MMC) remains limited. In this study, ultrasonic (US) disruption and alkaline digestion by NaOH were applied individually and in combination to obtain PHAs products from an acclimated MMC using phenol as the carbon source. Various parameters were tested, including ultrasonic sound energy density, NaOH concentration, treatment time and temperature, and biomass density. US alone caused limited cell lysis and resulted in high energy consumption and low efficiency. NaOH of 0.05–0.2 M was more efficient in cell disruption, but led to PHAs degradation under elevated temperature and prolonged treatment. Combining US and NaOH significantly improved the overall process efficiency, which could reduce energy consumption by 2/3rds with only minimal PHAs degradation. The most significant factor was identified to be NaOH dosage and treatment time, with US sound energy density playing a minor role. Under the semi-optimized condition (0.2 M NaOH, 1300 W L-1, 10 min), over 70% recovery and 80% purity were achieved from a 3 g L−1 MMC slurry of approximately 50% PHAs fraction. The material and thermal properties of the products were analyzed, and the polymers obtained from US + NaOH treatments showed comparable or higher molecular weight to previously reported results. The products also exhibited good thermal stability and rheological properties, compared to the commercial standard. In conclusion, the combined US and NaOH method has the potential in real application as an efficient process to obtain high quality PHAs from MMC, and cost-effectiveness can be further optimized. [Display omitted] • Ultrasonic (US) and alkaline digestion used to recover PHB from a mixed culture. • US disruption had limited effect of cell lysis and high energy consumption. • NaOH digestion was more efficient but led to PHA degradation under high temperature. • US + NaOH showed synergetic effect, reduced treatment time and energy consumption. • US + NaOH can be cost-effective after optimization, showing potential of scaling-up. [ABSTRACT FROM AUTHOR]