Search

[Display omitted] • A charge balanced adsorbent is fabricated for uranium extraction from seawater. • The adsorbent can resistant both biofouling and abiotic fouling. • The uranium extraction capacity is highly enhanced. • The uranium adsorption ability and anti-adhesive ability are highly reusable. The extraction of uranium from seawater is vital to meet the increase demands of uranium resource for the nuclear energy industry, while it is severe hazarded by the marine fouling, including both the biofouling and abiotic fouling. Previous reports only focused on the control of biofouling and rare attention is paid to the abiotic fouling. However, the abiotic fouling is the fundamental of the biofouling. Herein, a charged balanced hydrogel adsorbent is fabricated by introducing the charge-positive tetraethylenepentamine (TEPA) into the charge-negative polyacrylamidoxime (PAO). The fabricated PAO-CB hydrogel membrane shows high anti-adhesive ability to the marine fouling, including both the biofouling and abiotic fouling, which is due to the decrease of the charge attraction between the adsorbent and the charged contaminants. Benefitting from the reduce of marine fouling, the PAO-CB hydrogel membrane shows a high uranium extraction capacity of 8.59 mg g−1, which is higher than that of PAO hydrogel membrane by 44.59%. The finding of this study indicates that the construction of charge balanced adsorbent would be an effective strategy to control the complicated marine fouling during uranium extraction from seawater. [ABSTRACT FROM AUTHOR]

[Display omitted] • A charge balanced adsorbent is fabricated for uranium extraction from seawater. • The adsorbent can resistant both biofouling and abiotic fouling. • The uranium extraction capacity is highly enhanced. • The uranium adsorption ability and anti-adhesive ability are highly reusable. The extraction of uranium from seawater is vital to meet the increase demands of uranium resource for the nuclear energy industry, while it is severe hazarded by the marine fouling, including both the biofouling and abiotic fouling. Previous reports only focused on the control of biofouling and rare attention is paid to the abiotic fouling. However, the abiotic fouling is the fundamental of the biofouling. Herein, a charged balanced hydrogel adsorbent is fabricated by introducing the charge-positive tetraethylenepentamine (TEPA) into the charge-negative polyacrylamidoxime (PAO). The fabricated PAO-CB hydrogel membrane shows high anti-adhesive ability to the marine fouling, including both the biofouling and abiotic fouling, which is due to the decrease of the charge attraction between the adsorbent and the charged contaminants. Benefitting from the reduce of marine fouling, the PAO-CB hydrogel membrane shows a high uranium extraction capacity of 8.59 mg g−1, which is higher than that of PAO hydrogel membrane by 44.59%. The finding of this study indicates that the construction of charge balanced adsorbent would be an effective strategy to control the complicated marine fouling during uranium extraction from seawater. [ABSTRACT FROM AUTHOR]

The uranium level in seawater is ≈1000 times as high as terrestrial ores and can provide potential near‐infinite fuel for the nuclear energy industry. However, it is still a significant challenge to develop high‐efficiency and low‐cost adsorbents for massively extracting uranium from seawater. Herein, a simple and fast method through low‐energy consumption sunlight polymerization to direct fabrication of a poly(amidoxime) (PAO) hydrogel membrane, which exhibits high uranium adsorption capacity, is reported. This PAO hydrogel owns semi‐interpenetrating structure and a hydrophilic poly(acrylamide) 3D network of hydrogel which can disperse and fix PAOs well. As a result, the amidoxime groups of PAOs exhibit an outstanding uranium adsorption efficiency (718 ± 16.6 and 1279 ± 14.5 mg g−1 of muranium/mPAO in 8 and 32 ppm uranium‐spiked seawater, respectively) among reported hydrogel‐based adsorbents. Most importantly, U‐uptake capacity of this hydrogel can achieve 4.87 ± 0.38 mg g−1 of muranium/mdry gel just after four weeks within natural seawater. Furthermore, this hydrogel can be massively produced through low‐energy consumption and environmentally‐friendly sunlight polymerization. This work will provide a high‐efficiency and low‐cost adsorbent for massive uranium extraction from seawater. [ABSTRACT FROM AUTHOR]