Search

In negative ion sources for the ITER Neutral Beam Injection system, the co-extraction of electrons is one of the main limiting factors. The current of co-extracted electrons can be decreased by applying a positive bias voltage to the Plasma Grid (PG) with respect to its source walls. Simulations using three-dimensional Particle-in-Cell Monte Carlo Collision (3D-PIC MCC) model are a powerful tool for studying the extraction region of such ion sources. However, the inclusion of both PG and source walls in the simulation domain is difficult due to numerical constraints. This study uses the 3D-PIC MCC code ONIX to explore the effects of particle injection models on plasma characteristics, using a flux injection model to regulate particle influx for a flat transition in potential from the bulk plasma to the simulation domain. Biasing of the PG above floating potential is possible using the flux injection scheme and results in a notable reduction in co-extracted electrons, corroborating with established experimental observations. [ABSTRACT FROM AUTHOR]

The extraction of negatively charged particles from a negative ion source is one of the crucial issues in the development of the neutral beam injector system for future experimental reactor ITER. Full 3D electrostatic particle-in-cell Monte Carlo collision code-ONIX [S. Mochalskyy et al., Nucl. Fusion 50, 105011 (2010)]-is used to simulate the hydrogen plasma behaviour and the extracted particle features in the vicinity of the plasma grid, both sides of the aperture. It is found that the contribution to the extracted negative ion current of ions born in the volume is small compared with that of ions created at the plasma grid walls. The parametric study with respect to the rate of negative ions released from the walls shows an optimum rate. Beyond this optimum, a double layer builds-up by the negative ion charge density close to the grid aperture surface reducing thus extraction probability, and therefore the extracted current. The effect of the extraction potential and magnetic field magnitudes on the extraction is also discussed. Results are in good agreement with available experimental data. [ABSTRACT FROM AUTHOR]

Abstract: To achieve thermonuclear temperatures necessary to produce fusion reactions in the ITER Tokamak, additional heating systems are required. One of the main method to heat the plasma ions in ITER will be the injection of energetic neutrals (NBI). In the neutral beam injector, negative ions (D −) are electrostatically accelerated to 1MeV, and then stripped of their extra electron via collisions with a target gas, in a structure known as neutralizer. In the current ITER specification, the target gas is deuterium. It has been recently proposed to use lithium vapor instead of deuterium as target gas in the neutralizer. This would allow to reduce the gas load in the NBI vessel and to improve the neutralization efficiency. A Particle-in-Cell Monte Carlo code has been developed to study the transport of the beams and the plasma formation in the neutralizer. A comparison between Li and D 2 based neutralizers made with this code is presented here, as well as a parametric study on the geometry of the Li based neutralizer. Results demonstrate the feasibility of a Li based neutralizer, and its advantages with respect to the deuterium based one. [Copyright &y& Elsevier]

Abstract: This paper reviews the on-going design, R&D and procurement activities, mostly conducted within the ITER framework, on-going in Europe under the co-ordination of Fusion for Energy (F4E), in co-operation with the European Fusion Associations and aimed at the establishment of the ITER Heating Neutral Beam (HNB) system. [Copyright &y& Elsevier]

Decreasing the co-extracted electron current while simultaneously keeping negative ion (NI) current sufficiently high is a crucial issue on the development plasma source system for ITER Neutral Beam Injector. To support finding the best extraction conditions the 3D Particle-in-Cell Monte Carlo Collision electrostatic code ONIX (Orsay Negative Ion eXtraction) has been developed. Close collaboration with experiments and other numerical models allows performing realistic simulations with relevant input parameters: plasma properties, geometry of the extraction aperture, full 3D magnetic field map, etc. For the first time ONIX has been benchmarked with commercial positive ions tracing code KOBRA3D. A very good agreement in terms of the meniscus position and depth has been found. Simulation of NI extraction with different e/NI ratio in bulk plasma shows high relevance of the direct negative ion extraction from the surface produced NI in order to obtain extracted NI current as in the experimental results from BATMAN testbed. [ABSTRACT FROM AUTHOR]