Search

Abstract: The present work describes the adsorption and separation of xylene isomers by ZIF-8. Although the formal pore diameter of ZIF-8 is much smaller than the molecular diameter of the xylene isomers, ZIF-8 is able to separate the isomers by molecular sieving. A structural study indicates that the diffusion of the xylenes into the pore structure of ZIF-8 happens via a transitory deformation of the pore aperture which is based on a tilt of the imidazolate linkers, followed by a return to the initial conformation. The rate of adsorption depends on the size of the isomer, i.e. it decreases from para- to meta- and to ortho-xylene. The separation of the xylene isomers is good in the gas phase. In liquid phase breakthrough experiments, the quality of the separation is deteriorated. Moreover, as expected for a separation based on molecular sieving, para-xylene cannot be well separated from ethyl-benzene. [Copyright &y& Elsevier]

Abstract: ZIF-76, Zn(Im) x (5-ClbIm) y (Im=imidazolate, 5-ClbIm=5-chlorobenzimidazolate), is, among the known ZIF structures, one of the few materials that combine a relatively large pore aperture with a large pore volume. Moreover, it is thermally stable up to 400°C and can be stored under ambient atmosphere without undergoing a measurable degradation. ZIF-76, therefore, appears to be an interesting material for applications in adsorption and separation. The published synthesis protocol leads to very low yields and is, thus, not applicable on a larger scale . In this work, we have succeeded in preparing ZIF-76 in suitable yields by changing the solvent and adding NaOH to the synthesis mixture. The addition of the base increases the yield and leads to smaller crystal sizes, by favoring nucleation over crystal growth. By using the same synthesis strategy, four new isomorphs of ZIF-76 were obtained, with different substituents on the benzimidazole ligand (Me, Br and NO2) and different metal sources (Co and Zn). All the samples were tested in the adsorption and separation of CO2/CH4 in order to highlight the influence of the linker and of the metal center on the adsorption/separation properties. [Copyright &y& Elsevier]

The employment of metal-organic frameworks in powder form is undesirable from an industrial perspective due to process and safety issues. This work is devoted to evaluating the impact of compression on the textural and structural properties of CPO-27(Ni). For this purpose, CPO-27(Ni) was synthesized under hydrosolvothermal conditions and characterized. Then, the resulting powder was compressed into binderless pellets using variable compression forces ranging from 5–90 kN (37–678 MPa) and characterized by means of nitrogen adsorption/desorption, thermogravimetric analysis and powder X-ray diffraction to evaluate textural, thermal and structural changes. Both textural and structural properties decreased with increasing compression force. Thermal stability was impacted in pellets compressed at forces over 70 kN. CPO-27(Ni) pelletized at 5, 8 and 10 kN, and retained more than 94% of its initial textural properties, while a loss of about one-third of the textural property was observed for the two most compressed samples (70 and 90 kN) compared to the starting powder. [ABSTRACT FROM AUTHOR]