Search

We study the cross-layer energy efficiency of cooperative MIMO networks. At the physical layer, the transmit power determines the outage probability and the number of contending nodes per unit area. At the medium access control (MAC) layer, accessing the channel takes additional time and energy, which impacts the throughput and the energy efficiency. Then, we propose a new cooperative MAC protocol based on IEEE 802.11 in order to coordinate cooperation and to improve the energy efficiency. Moreover, we focus on slow fading scenarios and we analyze the performance of antenna selection (AS), singular value decomposition (SVD) diversity beamforming, and spatial multiplexing (SM) transmission schemes. Results show that SVD and SM have smaller delay and, consequently, larger throughput; however, AS is more energy efficient. [ABSTRACT FROM PUBLISHER]

This paper proposes an iterative power allocation algorithm that maximizes the energy efficiency of a multiple-relay cooperative multiple antenna (MIMO) network. Energy efficiency is defined as the achievable spectral efficiency normalized by the total power consumption, which also accounts for the RF circuitry consumption, modeled in a wireless sensor network. Moreover, relay selection is performed using the distributed opportunistic selection protocol, while we derive closed-form expressions for outage probability and energy efficiency for a single antenna (SISO) and two MIMO scenarios: 1) based on antenna selection (AS) and 2) based on single value decomposition (SVD) beamforming. In order to evaluate the performance of the proposed algorithm, we compare it to an exhaustive search optimal power allocation method. Results show that the proposed algorithm performs very close to an exhaustive search approach and that, although MIMO SVD has the best outage performance, AS has the best energy efficiency for low and moderate source-destination distances and spectral efficiencies. [ABSTRACT FROM AUTHOR]

In this paper we investigate the physical layer security in a cooperative scenario where the source and the eavesdropper are equipped with multiple antennas, while the relay and the destination are single-antenna devices. We consider that no channel state information (CSI) is available at the transmitter, besides the index of the selected transmit antenna. Closed-form expressions for the secrecy outage probability of the selective decode-and-forward (SDF) and incremental decode-and-forward (IDF) schemes are derived. In addition, we also conduct an asymptotic analysis to get further insights on the performance of each scheme, which predicts a performance floor inherent to the scenario without CSI at the transmitter. Moreover, we also analyze the schemes in terms of the secrecy throughput, which shows that the performance floor that appear in the outage analysis only affects the secrecy throughput if the floor is too high, as is the case of the non-cooperative transmission. Our analysis show that IDF can considerably outperform the SDF and the non-cooperative transmission both in terms of secrecy outage probability and secrecy throughput. [ABSTRACT FROM PUBLISHER]

We investigate the energy efficiency-spectral efficiency (EE-SE) trade-off of transmit antenna selection/maximum ratio combining (TAS) scheme. A realistic power consumption model (PCM) is considered, and it is shown that using TAS can provide significant energy savings when compared to multiple-input multiple-output (MIMO) in the low to medium SE region, regardless the number of antennas, as well as outperform transmit beamforming scheme (MRT) for the entire SE range. For a fixed number of receive antennas, our results also show that the EE gain of TAS over MIMO becomes even greater as the number of transmit antennas increases. The optimal value of SE that maximizes the EE is obtained analytically, and confirmed by numerical results. Moreover, the influence of receiver correlation is also evaluated and it is shown that considering a non-realistic PCM can lead to mistakes when comparing TAS and MIMO. [ABSTRACT FROM AUTHOR]

Reconfigurable intelligent surfaces (RISs) have been proposed as a key enabler to improve the coverage of the signals and mitigate the frequent blockages in millimeter wave (mmWave) multiple-input multiple-output (MIMO) communications. However, the channel state information (CSI) acquisition is one of the major challenges for the practical deployment of the RIS. The passive RIS without any baseband processing capabilities brings difficulty on the channel estimation (CE), since the individual channels or the cascaded one can be estimated only at base station (BS) via uplink training or mobile station (MS) via downlink training. In order to facilitate the CSI acquisition, we focus on the hybrid RIS architecture, where a small number of elements are active and able to receive and process the pilot signals at the RIS. The CE is performed in two stages by following the atomic norm minimization to recover the channel parameters, i.e., angles of departure (AoDs), angles of arrival (AoAs), and propagation path gains. Simulation results show that the proposed scheme can outperform the passive RIS CE under the same training overhead. Furthermore, we also study the theoretical performance limits in terms of mean square error (MSE) via Cramér-Rao lower bound (CRLB) analyses. [ABSTRACT FROM AUTHOR]

Providing higher data rate is a momentous goal for wireless communications systems, while interference is an important obstacle to reach this purpose. To cope with this problem, interference alignment (IA) has been proposed. In this paper, we propose two rank minimization methods to enhance the performance of IA in the presence of uncoordinated interference, i.e., interference that cannot be properly aligned with the rest of the network and thus is a crucial issue. In this scenario, perfect and imperfect channel state information (CSI) cases are considered. Our proposed approaches employ the $l_{2}$ and the Schatten- $p$ norms to approximate the rank function, due to its non-convexity. Also, we propose a new convex relaxation to expand the feasible set of our optimization problem, providing lower rank solutions compared to other IA methods from the literature. In addition, we propose a modified weighted-sum method to deal with interference in the relay-aided MIMO interference channel, which employs a set of weighting parameters in order to find more solutions. [ABSTRACT FROM AUTHOR]