Search

The gap between the rotor and the mixer chamber wall is an important factor in determining filler dispersion in rubber compounds. The inner wall of a mixer will wear after working for a long time, which will cause poor filler dispersion and affect the quality of rubber products. In this study, MoDTC was added to carbon black as a kind of filler, and the effect on filler dispersion, the properties of the rubber product, and the friction and wear of rubber and metal in the mixing process were examined. Experimental data showed that after adding 3 phr of MoDTC, carbon black dispersion was greatly improved, the curing time was shortened, and the performance remained stable. It was also found that the Mo element of the compound with 3 phr MoDTC dispersed better than that of the other compounds. Most importantly, adding 3 phr of MoDTC greatly reduced the amount of wear on the metal during the mixing process. However, the opposite effect occurred when the MoDTC content was high. The method proposed in this study can not only improve filler dispersion in rubber but also reduce metal wear to prolong the service life of the mixing chamber when applied to an actual mixing process. [ABSTRACT FROM AUTHOR]

As the basic equipment in the rubber field, the internal mixer is suitable for long-term rubber mixing. For the continuous production of the factory, the wear of the internal mixer is a problem that cannot be ignored. This article mainly studies the wear of the end face of the internal mixer. The end face of the mixer is connected to the mixing chamber. With the increase in mixing time, the end face of the mixer is inevitably worn. The abrasion of the end face of the internal mixer causes the gap between the end face of the internal mixer and the mixing chamber to increase, and the materials in the mixing chamber leak out. This affects the ratio of materials and reduces the mixing effect. And with the increase in material leakage, the abrasion of the end face of the internal mixer is intensified, which eventually leads to a decrease in the compound's performance. BF is a pure natural inorganic non-metallic material. It has good high-temperature resistance, and high compressive strength can be used in various environments and is inexpensive and cost-effective. Based on this, BF is increasingly used in the rubber field. In this paper, the effect of adding different amounts of BF on the friction and wear of the end face of the internal mixer is studied, and the proportions of varying wear forms are distinguished for the first time. The study finds that with the increase of BF in the compound, the proportion of abrasive wear first decreased and then increased, the balance of corrosion wear first increased and then decreased, and the amount of metal wear first decreased and then increased. It is found that the lowest wear of the rubber compound on the metal can be achieved when the amount of BF reaches 10 phr. When the BF amount increases, the corresponding amount of metal wear increases. • With the increase of mixing time, the end face of the mixer is inevitably worn. • This paper studied the effect of different BF additions on the friction and wear of metals. • It is found that the lowest wear of the rubber compound on the metal can be achieved when the amount of BF reaches 10 phr. [ABSTRACT FROM AUTHOR]