Search

Time delays are inevitable in the power systems with wide-area control signals, which may compromise the control pe-rformance and thus jeopardize the stability of the power systems. To analyze the impacts of system parameters on critical oscillation modes of a time-delayed power system (TDPS), a new method for eigenvalue trajectory tracking of TDPS is proposed in this paper based on the continuation theory of invariant subspaces. When small changes are imposed on system parameters, such as parameters of wide-area damping controllers (WADCs) and time delays, the invariant subspaces are continuously predicted and corrected, followed by the eigenvalues and eigenvectors. In the process, the predictor and corrector are computed by solving linear equations sparsely and in blocks, which is highly scalable and computationally efficient for large-scale power system applications. The 16-generator 68-bus test system and two real-world power grids in China are used to test and demonstrate the proposed method. The results show that the proposed method can accurately and efficiently track eigenvalue trajectories for TDPS, especially for large-scale power grids. In addition, the sensitivities of eigenvalues and eigenvectors with respect to WADCs’ parameters and time delays are obtained as by-products of the approach. [ABSTRACT FROM AUTHOR]

The existing spectral discretization-based methods (SDMs) are capable of accurately computing critical eigenvalues of large power systems when time delays in wide-area damping control loops are considered. However, SDMs suffer from huge dimension of the discretized matrices of spectral operators, which is usually dozens of times of actual system states. To resolve the problem, an idea of partial spectral discretization (PSD) is proposed in this paper where only the retarded state variables instead of all system states are discretized. Following the PSD idea, a partial and explicit infinitesimal generator discretization (PEIGD) method is presented for highly efficient eigen-analysis of large closed-loop delayed cyber-physical power system (DCPPS). In contrast to the original EIGD method, the order of the resultant discretized matrix of the infinitesimal generator is greatly reduced and close to the number of actual state variables. The computational burden of PEIGD can be an order of magnitude less than that of EIGD and nearly the same as eigen-analysis of a system without time delay. Moreover, PEIGD is endowed with exactly the same accuracy as EIGD in capturing critical oscillation modes. Both theoretical analyses and intensive tests on the 16-generator 68-bus test system as well as a 516-bus and a 33028-bus real-life large power systems verify the accuracy and efficiency of the presented method. [ABSTRACT FROM AUTHOR]

Highlights • Matrix perturbation theory is applied to stability analysis and control of DCPPS. • A perturbation-based eigenvalue tracking method is offered to track targeted modes. • It is a building block for optimally tuning WADCs to damp interarea oscillations. • Delay approximation effect on SOD-based eigenvalue method's accuracy is analyzed. • Identified key factors guide to select suitable parameters to precondition DCPPS. Abstract In this paper, the matrix perturbation theory is introduced to delayed cyber-physical power system (DCPPS) for analyzing the variations of eigenvalues and eigenvectors when small changes are imposed on system parameters and time delays. On one hand, a perturbation-based eigenvalue tracking method is presented to reliably track the targeted interarea oscillation modes so that wide-area damping controllers (WADCs) can be optimally designed to damp them. On the other hand, key factors affecting the accuracy of the solution operator discretization (SOD)-based eigenvalue computation methods for DCPPS are identified by matrix perturbation analysis, which provide a guidance for selecting suitable parameters to precondition the DCPPS. The study results on the 16-generator 68-bus test system validate the effectiveness of the two applications of matrix perturbation theory. [ABSTRACT FROM AUTHOR]

This paper presents a nonsmooth optimization-based method to optimally tune wide-area damping controllers in large delayed cyber-physical power system (DCPPS). The objective is to maximize the damping ratios of the weakly damped interarea oscillation modes under multiple operating conditions. An eigenvalue-perturbation and receding-tracking method is then proposed to reliably trace the targeted interarea oscillation modes during the optimization process. The Broyden–Fletcher–Goldfarb–Shanno method combined with the gradient sampling technique is employed to efficiently solve the presented nonsmooth, nonconvex, and nonlinear eigenvalue optimization-based problem. The effectiveness of the proposed method is validated by the significantly improved damping of the interarea oscillation modes in the two-area four-machine test system and a real-life large DCPPS. [ABSTRACT FROM AUTHOR]