Search

The combustion phenomenon is characterized by rapid self-sustaining reactions, which can occur in the solid, liquid, or gas phase. Specific types of these reactions are used to produce valuable materials by different combustion synthesis (CS) routes. In this article, all three CS approaches, i.e. solid-phase, solution, and gas-phase flame, are reviewed to demonstrate their attractiveness for fabrication of zero-, one-, two-, and three-dimensional nanostructures of a large variety of inorganic compounds. The review involves five sections. First, a brief classification of combustion synthesis methods is given along with the scope of the article. Second, the state of art in the field of solid-phase combustion synthesis is described. Special attention is paid to the relationships between combustion parameters and structure/properties of the produced nanomaterials. The third and fourth sections describe details for controlling material structures through solution combustion synthesis and gas-phase flame synthesis, respectively. A variety of properties (e.g., thermal, electronic, electrochemical, and catalytic) associated with different types of CS nanoscale materials are discussed. The conclusion focuses on the most promising directions for future research in the field of advanced nanomaterial combustion synthesis. [ABSTRACT FROM AUTHOR]

In this study, a single-step combustion process for the synthesis 1-D, 2-D, and 3-D micro and nanostructures of AlN was developed. The structures were grown by combustion of Al+ k AlF 3 (or ZnF 2 )+ m NH 4 Cl reaction mixture under 4.0 MPa nitrogen atmosphere. Based on experimental data, the growth conditions, morphology, and composition, optical, and thermal properties of AlN micro and nanostructures were determined. The formation of structures was associated with the combustion temperature, liquid and gas-phase reactions, and the type of additives used in the experiments. The new insight, we gleaned from this study may help in the selective growth of AlN micro and nanostructures of different morphology, enhancing their functionality. [ABSTRACT FROM AUTHOR]

Combustion based synthesis of AlN nanoparticles using the "solid nitrogen" promotion reaction was investigated in Al2O3 + 3Mg system in nitrogen atmosphere. A controlled amount of Mg + 0.5NH4Cl mixture as a solid source of nitrogen was blended with the Al2O3 + 3Mg starting system and the synthesis reaction of AlN nanoparticles was conducted using the exothermic heat of the entire reaction system. The resulting AlN nanoparticles were characterized by X-ray diffraction (XRD), Raman and Fourier transform infrared spectroscopy (FTIR), PL spectroscopy, field-emission scanning electron microscopy, transmission electron microscopy, and Brunauer-Emmett-Teller surface area techniques. The analysis results confirmed that single phase and crystalline AlN nanoparticles with an average size of 50-500 nm were obtained from the developed approach. Photoluminescence spectra of AlN nanopowders under the excitation of 230-270 nm UV light revealed that AlN emits yellow-red light having a wavelength near to 590 nm. The chemistry of the combustion process is discussed and the basic reactions that led to the formation of AlN are presented. [ABSTRACT FROM AUTHOR]

Abstract: An experimental study on the preparation of zirconium silicides was conducted using ZrSiO4–Mg, ZrSiO4–SiO2–Mg and ZrSiO4–ZrO2–Mg powder mixtures by the combustion synthesis (CS) technique. Test specimens having different composition ratios including Zr:Si=1:2, 1:1, 5:4, 5:3, 2:1, and 3:1 were employed in this study. Temperature profiles relative to all the starting compositions were measured using thermocouples, and the values of the combustion parameters (combustion temperature and wave velocity) were estimated using the same. The formation of ZrSi, ZrSi2, Zr5Si3, and Zr3Si2 phases was confirmed by X-ray analysis; however, only ZrSi was produced as a single-phase product. The proposed method was also extended to synthesize spherical ZrSi particles having mean diameters of 0.2–3.0μm. A comprehensive chemical pathway to describe the sequence of chemical reactions in the combustion wave was also proposed. [ABSTRACT FROM AUTHOR]