Search

Most regional landslide warning systems utilize empirically derived rainfall thresholds that are difficult to improve without recalibration to additional landslide events. To address this limitation, we explored the use of synthetic rainfall to generate thousands of possible storm patterns and coupled them with a physics‐based hydrology and slope stability model for various antecedent soil saturation scenarios to analyze pore water pressure and factor of safety metrics. We used these metrics to generate two‐tiered alert thresholds that can be employed to assess shallow landslide potential for any given combination of storm and antecedent wetness. When applied to the San Francisco Bay region (CA, USA), the results are consistent with events that caused widespread landsliding. Our deterministic modeling approach, which accounts for plausible ranges in soil hydraulic and mechanical properties, can inform the development of the next generation of warning systems for rainfall‐induced landsliding. Plain Language Summary: Providing accurate warning in advance of rainfall‐induced landsliding can help reduce loss of life and property but requires knowledge of hillslope wetness and future rainfall conditions to forecast when widespread landsliding is likely. However, typical landslide warning systems consider only the rainfall characteristics (e.g., rainfall amount, duration, and/or intensity) that were measured during past landslide events. These are used to define a set of rainfall conditions, or a threshold, for which landsliding should be expected within a given area. When a rainfall threshold does not perform well for subsequent landsliding events, it can be difficult to diagnose the problem because hillslope wetness is not considered. We present an approach to develop landslide thresholds that accounts for both rainfall and hillslope wetness. The results are consistent with historical and recent widespread landsliding events in our study region and, more importantly, can be related to measurable properties of hillslopes. This more direct approach could revolutionize the development of the next generation of landslide warning systems. Key Points: Thresholds for rainfall‐induced landsliding of soil‐mantled hillslopes identified with physics‐based hydrologic and slope stability modelingLibrary of modeled infiltration events based on variations in rainfall and antecedent soil saturation facilitates timely hazard assessmentDeterministic modeling approaches that account for parameter variability can inform the next generation of landslide warning systems [ABSTRACT FROM AUTHOR]

Many landslides were triggered by heavy rainfall from 29 June to 1 July 2017 in Ningxiang County, Hunan Province, China. A field investigation into one of the landslides, known as the Wangjiawan landslide, was undertaken on July 3, 2017, to understand the landslide mechanisms and the factors that triggered the event. The landslide is a translational and rotational slide that degraded downslope to an earth flow. It occurred on a steeply dipping mud-rich slate intercalation. Field investigation shows that the landslide had a movement rate of more than 25 m/s and had been triggered by up to 338 mm of continuous rainfall over 2 days. The landslide was fast-moving because it occurred on a steep slope and showed a rapid reduction in shear strength. The landslide resulted in nine fatalities and 19 injuries, most during initial rescue efforts. To mitigate a possible secondary landslide disaster, later emergency measures including evacuation of the survivors, setting up warning signs, and covering landslide cracks with plastic sheeting were adopted. [ABSTRACT FROM AUTHOR]

The wired and wireless monitoring system installed in the Rebaixader catchment detected six debris flows and 11 debris floods between 2009 and 2012. Apart from results directly related to the processes, many experiences associated with monitoring were collected. Debris flows and debris floods showed clear differences in both the recorded data and field observations. The distinction was especially visible in the stage measurements and the ground vibration registered by the most downstream geophone. At this geophone, a positive relation between the maximum ground vibration and the volume was also observed. The triggering of most events was associated with short, high-intensity rainstorms in summer, but some were also generated in spring, when the melting of snow cover and frozen soil played an additional role. A positive correlation between the volume and both the amount and the intensity of the triggering rainfall was observed. Regarding technical aspects, a switch between a 'no-event' mode with a low sample rate and an 'event' mode with a fast sampling was particularly useful at the station that register the passing of a flow. In addition, the stations, which most recently were installed at Rebaixader, apply wireless devices because wireless techniques include multiple advantages against standard wired systems. Although recorded data or even video images provide detailed information on the debris-flow behavior, we strongly recommend periodic field surveys along the entire torrent to verify and improve the interpretation obtained from the monitoring system. [ABSTRACT FROM AUTHOR]

The 12 May 2008 Wenchuan earthquake in China triggered numerous landslides. Loose landslide materials can easily evolve into deadly debris flows during wet seasons. During the period from 2008 to 2011, three separate large-scale debris flows occurred in the Pubugou Ravine near the epicentre of the earthquake that were among the largest repeated debris flows ever reported. Approximately 1.76 × 106 m3 of sediment was deposited during these three events. This paper aims to ( i) analyze the movements of solid materials during the repeated debris flows, ( ii) discuss the evolution of the initiation mechanisms of these debris flows, and ( iii) evaluate the changing depositional morphology of the debris flow fans and examine the particle sizes of the debris flow materials. To achieve the above research objectives, timely field investigations were undertaken in the past 5 years after each of these debris flow events. Satellite images were used to delineate the boundaries of the initiation areas, the transportation channels, and the deposition zones of these debris flows. With the occurrence of the repeated debris flows, the hill slope deposits gradually evolved into channel deposits and the solid materials in the channels moved toward the gully mouth. Hence, channelized flows gradually became dominant. The debris fan materials of the repeated debris flows became coarser and coarser over time. The three debris flows were all characterized by coarse boulder fronts. [ABSTRACT FROM AUTHOR]