Search

This article proposes a new discrete-time predictive sliding mode control (DPSMC) for a parallel micropositioning piezostage to improve the motion accuracy in the presence of cross-coupling hysteresis nonlinearities and input constraints. Unlike the traditional linear discrete-time sliding mode control (DSMC), the proposed DPSMC is chattering free and has a faster convergence rate thanks to the design of a nonlinear discrete-time fast integral terminal sliding mode surface. Moreover, by combining with the receding horizon optimization, the sliding mode state is predicted to follow the expected trajectory of a predefined continuous sliding mode reaching law, which also allows the proposed controller to explicitly deal with constraints. The stability of the closed-loop system is analyzed under the model disturbances and constraints, and proves that the proposed DPSMC can offer a smaller quasi-sliding mode bandwidth than the traditional DSMC. The effectiveness of the proposed controller is validated by a series of numerical simulations and experiments. Results demonstrate the advantages of proposed DPSMC over the traditional DSMC method. [ABSTRACT FROM AUTHOR]

Parallel micropositioning piezostages are widely used in the micro-/nano-manipulation applications, but also subject to the nonlinear disturbances, like hysteresis, creep and cross-coupling effects. In this paper, a new fractional robust adaptive decoupled control (FRADC) is synthesized for a six-axis parallel micropositioning piezostage to improve the positioning accuracy. The proposed FRADC contains three intuitional terms: (1) a decoupling term that alleviates the coupled motions among different axes, making the controller implementation more convenient and efficient; (2) a feedforward compensation term based on a fractional normalized Bouc-Wen (FONBW) model, compensating for the rate-dependent hysteresis effect induced by the piezoelectric actuators; (3) a feedback model reference adaptive control (MRAC) term with fractional proportional-plus-integral-type updating rules that suppresses the creep effect, parameters uncertainty and external disturbances, further enhancing the robustness and positioning accuracy. The stability of the closed-loop system is analyzed in theory. The effectiveness of the proposed FRADC is experimentally validated by comparing with the standalone inverse-FONBW-based feedforward control, the standalone feedback fractional MRAC, and the traditional integer-order control methods. Results demonstrate that the proposed FRADC can guarantee higher positioning accuracy for the piezostage system in wider control bandwidth. [ABSTRACT FROM AUTHOR]

In this paper, a new composite controller (feedforward + feedback) is proposed for the trajectory tracking control of a piezo-driven bridge displacement amplifier. A hysteresis model considering dynamic effects is established based on the modified Bouc–Wen (MBW) model, which can describe the asymmetry and frequency-dependence behaviors. The effectiveness of the modified model is verified by the experimental comparison. A feedforward controller is designed to compensate for hysteresis nonlinearity based on the inverse multiplicative structure of the modified model. A feedback controller with the Kalman observer is designed based on a modified model predictive control (MMPC). The proportional term and integral term of feedback error are introduced into the MPC control law to improve the response speed and reduce the steady-state error. The proposed MBW + MMPC is compared with MBW + proportional–integral–derivative (PID), and MBW + MPC. The experimental tracking results of continuously differentiable signals and non-differentiable signals verify MBW + MMPC feasibility and show that it can improve tracking performance. [ABSTRACT FROM AUTHOR]