Search

Cadmium-116 is one of the favorable candidates for neutrinoless double-beta decay ( 0 ν β β ) searches from both theoretical and experimental points of view, in particular thanks to the high energy of the decay (2813.49 keV), the possibility of the industrial enrichment in 116 Cd and its use in the well-established production of cadmium tungstate crystal scintillators. In this work, we present low-temperature tests of two 0.6 kg 116 CdWO 4 crystals enriched in 116 Cd to 82 % as scintillating bolometers. These detectors were operated underground, with one at the Laboratoire Souterrain de Modane (LSM) in France and the second at the Laboratorio Subterraneo de Canfranc (LSC) in Spain. The two crystals are coupled to bolometric Ge light detectors in order to register the scintillation light. The double readout of heat and scintillation enables reduction in the background in the region of interest by discriminating between different populations of particles. The main goal of these tests is the study of the crystals' radiopurity and the detectors' performance. The achieved results are extremely promising, in particular, the detectors demonstrate a high energy resolution (11–16 keV FWHM at 2615 keV) and a high-efficiency discrimination of the alpha background ( ∼ 20 σ ). These results, achieved for the first time with large mass enriched 116 CdWO 4 crystals, demonstrate prospects of the bolometric technology for high-sensitivity searches of 116 Cd 0 ν β β decay. [ABSTRACT FROM AUTHOR]

Abstract: The ATLAS Tile Calorimeter is a sampling detector composed by cells made of iron-scintillator tiles. The calorimeter cell signals are digitized in the front-end electronics and transmitted to the Read-Out Drivers (RODs) at the first level trigger rate. The ROD receives triggered data from up to 9856 channels and provides the energy, phase and quality factor of the signals to the second level trigger. The back-end electronics is divided into four partitions containing eight RODs each. Therefore, a total of 32 RODs are used to process and transmit the data of the TileCal detector. In order to emulate the detector signals in the production and commissioning of ROD modules a board called ROD Injector and Multiplexer Board (RIMBO) was designed. In this paper, the RIMBO main functional blocks, PCB design and the different operation modes are described. It is described the crucial role of the board within the TileCal ROD test-bench in order to emulate the front-end electronics during the validation of ROD boards as well as during the evaluation of the ROD signal reconstruction algorithms. Finally, qualification and performance results for the injection operation mode obtained during the Tile Calorimeter ROD production tests are presented. [ABSTRACT FROM AUTHOR]

Abstract: The calorimeter system of the LHCb experiment consists of a scintillator layer (SPD), a preshower detector (PS), an electromagnetic calorimeter (ECAL) and a hadronic calorimeter (HCAL), and allows to trigger on hadron, electron and photon candidates. The time synchronization of the four sub-detectors studied with cosmic rays, LHC beam injection tests and LHC proton proton collisions is presented. Energy calibration methods for each subsystem are discussed as well. [ABSTRACT FROM AUTHOR]