Search

In this article, we present an investigative study on the often-overlooked partial wake phenomenon in previous studies concerning wind farm configurations. A partial wake occurs when a portion of the actuator disk of a downstream wind turbine is affected by the wake of another upstream turbine. This phenomenon occurs in addition to the full wake, where the entire upstream turbine is affected by the wake of the frontal turbine, also leading to a decrease in wind speed and consequently a reduction in power production. The proposed study is based on measuring the power generated by the area swept by the wake of an array of turbines in a wind farm. To accomplish this, we integrate the linear wake model of Jensen, the specifications of the ENERCON E2 wind turbine, and the wind farm data into Matlab-developed software (version 18) to perform the calculations. In a concrete application, this proposed method is validated by reproducing the previous works that neglected the partial wake in wind farm configurations. The simulation results obtained are analyzed, compared, and discussed under similar operational conditions. [ABSTRACT FROM AUTHOR]

This paper proposes a control strategy to achieve minimum wake-induced power losses in a wind farm. At first, the axial-induction-based wake model is developed to consider the aerodynamic wake interactions among wind turbines. To optimize the generated power of the whole wind farm, the axial induction factor of each wind turbine is calculated by the genetic algorithm. As a supervisory controller, each wind turbine's optimal axial induction factor calculated by the genetic algorithm is implemented as a setpoint of each wind turbine's internal controller. In the internal control loop, a comprehensive controller is designed to track the commanded axial induction factor. In the partial load region, the commanded axial induction factor was attained by tuning the generator torque. In the transient and full load regions, the blade pitch angle is tuned to keep the generator speed and torque at the rated values. The performance of the proposed control strategy is investigated through case studies, including three different wind speeds and a time-varying wind speed case in a 3 × 3 wind-farm layout. The simulation results show the satisfactory performance of the proposed approach. [ABSTRACT FROM AUTHOR]

This paper conducts a comparative analysis of three wind farm simulators, examining the influence of wake on the local wind speed and power output for downstream turbines using experimental data. The study features experiments in three distinct scenarios, evaluating differences among the simulators by calculating the local wind speed and power for each. Each simulator employs a unique wake model, which substantially affects the local wind speed experienced by downstream turbines. Furthermore, the experiment involves adjusting parameter values for each simulator to assess their respective impacts on wind farm performance. The findings of this research are expected to play an important role in investigations related to power optimization and wake effects in the wind farm control. [ABSTRACT FROM AUTHOR]

This paper discusses how the incorporation of high-resolution ground coverage dataset ESA WorldCover into a wind flow field and wake simulation calculation, as well as the use of the coupled wake model for wind farm output simulation, can improve the accuracy of wind resource assessment using engineering examples. In the actual case of grid-connected wind farms in central China, SCADA wind speed data is reconstructed to the free flow wind speed in front of the wind turbine impeller using the transfer function of the nacelle, and the wind farm is modeled using OpenWind software, simulating the wind speed at the height of each wind turbine hub and each wind turbine output. The results show that when other initial data are consistent, using ESA's high-precision land cover dataset WorldCover 10 m to make roughness lengths which improves the wind farm output simulation accuracy by 8.91%, showing that it is worth trying to apply WorldCover 10 m to the wind farm simulation design. At the same time, this case is used to compare and analyze the application of the Eddy-Viscosity wake model and the two coupled wake models based on the Eddy-Viscosity wake model. The results show that the coupled wake model will have higher accuracy than the Deep Array Eddy Viscosity wake model and it is 1.24% more accurate than the Eddy Viscosity wake model, and the ASM Eddy Viscosity wake model is 5.21% more accurate than the Eddy Viscosity wake model. [ABSTRACT FROM AUTHOR]

The operational security of power systems for wind farm (WF) integration becomes more important as the penetration of wind generation increases. A WF may contain hundreds of wind turbines (WT) and thus the power system simulations based on the complex model of a WT consume much time. This article proposes an equivalent WF model with the frequency-regulation function. The main research works include the establishment of the generic model of a WT, the development of single- and multimachine equivalent models for a large WF, the clustering of WTs based on the developed nonlinear wake model and the fuzzy C-means (FCM) clustering algorithm, the integration of the frequency-regulation function into the equivalent WF model, and the validation of the developed equivalent WF model by various operating scenarios. The results demonstrate that the proposed multimachine equivalent method based on the FCM clustering provides a more accurate model than a single-WT equivalent model. Consequently, the research results provide a solution for simulating a large-scale wind power integration, providing efficient, accurate, and fast steady-state and dynamic analyses. [ABSTRACT FROM AUTHOR]

A wind turbine operating in the wake of another turbine and has a reduced power production because of a lower wind speed after rotor. The flow field in the wake behind the first row turbines is characterized by a significant deficit in wind velocity and increased levels of turbulence intensity. To maximize the wind farm net profit, the number of turbines installed in the wind farm should be different in depend on wind farm project investment parameters. Therefore modeling wake effect is necessary because it has a great influence on the actual energy output of a wind farm. In this paper, the extreme learning machine (ELM) coupled with wavelet transform (ELM-WAVELET) is used for the prediction of wind turbine wake effect in wind far. Estimation and prediction results of ELM-WAVELET model are compared with the ELM, genetic programming (GP), support vector machine (SVM) and artificial neural network (ANN) models. The following error and correlation functions are applied to evaluate the proposed models: Root Mean Square Error (RMSE), Coefficient of Determination ( R 2 ) and Pearson coefficient ( r ). The experimental results show that an improvement in predictive accuracy and capability of generalization can be achieved by ELM-WAVELET approach (RMSE = 0.269) in comparison with the ELM (RMSE = 0.27), SVM (RMSE = 0.432), ANN (RMSE = 0.432) and GP model (RMSE = 0.433). [ABSTRACT FROM AUTHOR]

The grouping of turbines in large farms introduces that a wind turbine operating in the wake of another turbine and has a reduced power production because of a lower wind speed after rotor. The flow field in the wake behind the first row turbines is characterized by a significant deficit in wind velocity and increased levels of turbulence intensity. Consequently, the downstream turbines in a wind farm cannot extract as much power from the wind as the first row turbines. Therefore modeling wake effect is necessary because it has a great influence on the actual energy output of a wind farm. In this study, the adaptive neuro-fuzzy inference system (ANFIS) is designed and adapted to estimate wake effect in a wind farm according to wind turbine positions in wind farm, distances between turbines in the wind farm and rotor radius as well. [ABSTRACT FROM AUTHOR]

• A parallel framework for wind farm optimization is developed using six wake models. • Framework accounts for terrain elevation and wake-terrain interaction. • Four turbine specific cost models are developed. • Wind farm area model is developed as the area of convex hull. • Optimization of a realistic wind farm is performed for maximum power generation. A new framework for Wind Farm Layout Optimization (WindFLO) is developed to accelerate the design of wind farms. The framework provides a large set of analytical wake models and wake superposition schemes. It is able to take into account terrain elevation and the ambient wind velocity profile. The schemes in the WindFLO model were validated against experimental data from a wind tunnel to within 1% relative error. A turbine rotor diameter and height dependent cost model was also developed using data from 250 different wind turbines. A land usage model was also developed using the convex hull approach. The framework was used to optimize a wind farm layout for maximum annual energy production using real wind farm terrain and conditions. The nonlinear optimization problem was solved using a robust Single-Objective Hybrid Optimizer. The wind farm layout and wind turbine (rotor diameter and tower height) were optimized and resulted in increased annual energy production, reduced cost and reduced land usage. The WindFLO framework is made publicly available to accelerate and advance the techniques for wind farm optimization. 1 1 WindFLO can be downloaded from https://github.com/sohailrreddy/WindFLO. [ABSTRACT FROM AUTHOR]

• The machine learning framework achieves favorable accuracy and efficiency in the wake prediction. • ADM-R/RANS coupling model can efficiently produce big wake datasets for machine learning model. • For an aligned turbine row, power drops at the second turbine and gradually stabilizes afterwards. • Turbulence model plays an important role in accurate power prediction of wind farm. In the paper, a novel framework that employs the machine learning and CFD (computational fluid dynamics) simulation to develop new wake velocity and turbulence models with high accuracy and good efficiency is proposed to improve the turbine wake predictions. An ANN (artificial neural network) model based on the back-propagation (BP) algorithm is designed to build the underlying spatial relationship between the inflow conditions and the three-dimensional wake flows. To save the computational cost, a reduced-order turbine model ADM-R (actuator disk model with rotation), is incorporated into RANS (Reynolds-averaged Navier-Stokes equations) simulations coupled with a modified k - ε turbulence model to provide big datasets of wake flow for training, testing, and validation of the ANN model. The numerical framework of RANS/ADM-R simulations is validated by a standalone Vestas V80 2 MW wind turbine and NTNU wind tunnel test of double aligned turbines. In the ANN-based wake model, the inflow wind speed and turbulence intensity at hub height are selected as input variables, while the spatial velocity deficit and added turbulence kinetic energy (TKE) in wake field are taken as output variables. The ANN-based wake model is first deployed to a standalone turbine, and then the spatial wake characteristics and power generation of an aligned 8-turbine row as representation of Horns Rev wind farm are also validated against Large Eddy Simulations (LES) and field measurement. The results of ANN-based wake model show good agreement with the numerical simulations and measurement data, indicating that the ANN is capable of establishing the complex spatial relationship between inflow conditions and the wake flows. The machine learning techniques can remarkably improve the accuracy and efficiency of wake predictions. [ABSTRACT FROM AUTHOR]