Search

Contact behavior between the gas diffusion layer (GDL) and bipolar plate (BPP) is of significant importance for proton exchange membrane fuel cells. Most current studies on contact behavior utilize experiments and finite element modelling and focus on fuel cells with graphite BPPs, which lead to high costs and huge computational requirements. The objective of this work is to build a more effective analytical method for contact behavior in fuel cells and investigate the size effect resulting from configuration alteration of channel and rib (channel/rib). Firstly, a mathematical description of channel/rib geometry is outlined in accordance with the fabrication of metallic BPP. Based on the interface deformation characteristic and Winkler surface model, contact pressure between BPP and GDL is then calculated to predict contact resistance and GDL porosity as evaluative parameters of contact behavior. Then, experiments on BPP fabrication and contact resistance measurement are conducted to validate the model. The measured results demonstrate an obvious dependence on channel/rib size. Feasibility of the model used in graphite fuel cells is also discussed. Finally, size factor is proposed for evaluating the rule of size effect. Significant increase occurs in contact resistance and porosity for higher size factor, in which channel/rib width decrease. [ABSTRACT FROM AUTHOR]

Multi-stage forming of the ultra-thin metallic sheets is a promising process for manufacturing fine width and high aspect ratio bipolar plates in proton exchange membrane fuel cell. Correlations between the processing parameters and the channel quality evaluation indicators are investigated experimentally and numerically. A novel parameter optimization method and stage number design guidance are established with the consideration of the indicator priorities and material properties. The forming depth can be increased by larger Stage II punch stroke along with smaller clearance and radius. Increasing or decreasing the Stage II punch stroke and radius simultaneously contributes to larger draft angle. Small Stage II punch stroke and radius are beneficial to greater rib width. More uniform thickness distribution can be achieved by using smaller Stage II punch stroke and clearance. Two-stage forming is enough for soft materials and three-stage forming is suitable for relatively hard materials. Both the output power density and voltage distribution uniformity of the proton exchange membrane fuel cell are improved by employing multi-sage formed bipolar plates. The relationship between the parameters and indicators, optimization method, stage number design guidelines, all serve as the design principles of the micro channel's multi-stage forming for bipolar plates with ultra-thin metallic sheets. Image 1 • High performance BPPs are fabricated by multi-stage forming in ultra-thin sheets. • Influences of processing parameters on quality evaluation indicators are studied. • Novel parameter optimization method is established in a quantitative manner. • Guidance of the stage number design for different material properties is proposed. [ABSTRACT FROM AUTHOR]