Search

Recent advancements in the industrial revolution and artificial intelligence have aided in the development of novel approaches that have considerable potential for increasing the efficiency of traffic networks. Emerging concepts of autonomous driving and machine learning can be incorporated intelligently for improving traffic operations and control. In the coming years, traffic composition can vary in terms of autonomous vehicle (AV) penetration rate, which can lead to a heterogeneous traffic environment. Traffic control methods for such complex networks need to be designed effectively for accommodating the positive effects of AV implementation without compromising the safety and level of service in the presence of regular vehicles (RVs). An intelligent-based optimization framework for traffic signal control under heterogeneous AV-based traffic is proposed in this paper. This framework utilizes state-of-the-art machine-learning approaches to represent and design different components of the optimization process of cycle length. Further, SHapley Additive exPlanations (SHAP) is used to enhance model interpretability. The proposed optimization framework improves performance under congested traffic conditions compared with that of the conventional optimization methods. Compared to pure RV-based traffic, the penetration rates of 25%, 50%, and 100% can decrease optimized cycle lengths by 26%, 39%, and 53%, respectively, which can result in delay reductions of approximately 18%, 31%, and 56%, respectively. The proposed framework when applied in an adaptive-based manner can help in the generalization of controlling existing signalized intersections with the gradual penetration of AVs without the extra infrastructure or specific operational and connectivity capabilities of the involved vehicles. [ABSTRACT FROM AUTHOR]

Compared to traditional traffic signal control methods, the method driven by Deep Reinforcement Learning (DRL) has shown better performance. But the problem of low sample utilization in reinforcement learning also arises. To deal with the problem, this paper presents a novel Twin Delayed Deep Deterministic Policy Gradient with Dual Buffer (TD3_DB) for traffic signal control. In the proposed framework, two experience buffers are used to store important samples and normal samples, separately, and the proportion of the two buffers is adjusted adaptively. In addition, lane pressure, describing the dynamic feature of lane traffic flow, is used for the state design of the TD3 agent, which enhances the perception of the agent toward intersections. Comprehensive experiments on different traffic flow modes has shown, the dual experience replay scheme can improve the sample utilization, and the proposed TD3_DB performs better than other methods such as original TD3, Proximal Policy Optimization (PPO), etc., effectively reducing vehicle queue length and waiting time. [ABSTRACT FROM AUTHOR]

One of the focal points in the field of intelligent transportation is the intelligent control of traffic signals (TS), aimed at enhancing the efficiency of urban road networks through specific algorithms. Deep Reinforcement Learning (DRL) algorithms have become mainstream, yet they suffer from inefficient training sample selection, leading to slow convergence. Additionally, enhancing model robustness is crucial for adapting to diverse traffic conditions. Hence, this paper proposes an enhanced method for traffic signal control (TSC) based on DRL. This approach utilizes dueling network and double q-learning to alleviate the overestimation issue of DRL. Additionally, it introduces a priority sampling mechanism to enhance the utilization efficiency of samples in memory. Moreover, noise parameters are integrated into the neural network model during training to bolster its robustness. By representing high-dimensional real-time traffic information as matrices, and employing a phase-cycled action space to guide the decision-making of intelligent agents. Additionally, utilizing a reward function that closely mirrors real-world scenarios to guide model training. Experimental results demonstrate faster convergence and optimal performance in metrics such as queue length and waiting time. Testing experiments further validate the method's robustness across different traffic flow scenarios. [ABSTRACT FROM AUTHOR]

In many real-life scenarios, multiple agents necessitate cooperation to accomplish tasks. Benefiting from the significant success of deep learning, many single-agent deep reinforcement learning algorithms have been extended to multi-agent scenarios. Overestimation in value estimation of Q-learning is a significant issue that has been studied comprehensively in the single-agent domains, but rarely in multi-agent reinforcement learning. In this paper, we first demonstrate that Q-learning-based multi-agent reinforcement learning (MARL) methods generally have notably serious overestimation issues, which cannot be alleviated by current methods. To tackle this problem, we introduce the double critic networks structure and the delayed policy update to Q-learning-based multi-agent MARL methods, which reduce the overestimation and enhance the quality of policy updating. To demonstrate the versatility of our proposed method, we select several Q-learning based MARL methods and evaluate them on several multi-agent tasks on the multi-agent particle environment and SMAC. Experimental results demonstrate that the proposed method can avoid the overestimation problem and significantly improve performance. Besides, application in the Traffic Signal Control verifies the feasibility of applying the proposed method in real-world scenarios. [ABSTRACT FROM AUTHOR]

Traffic signal control (TSC) can be described as a multi-agent cooperative game. To realize cooperation, multi-agent reinforcement learning (MARL) is a significant approach, with communication being a core component. The large-scale traffic signals and the partially observable information in TSC pose a considerable challenge in finding the optimal joint control policy. This paper proposed a deep MARL model named attentional graph relations communications network (AGRCNet). Based on the Actor-Critic framework, AGRCNet designs a communication network to exchange observation information with agents to help obtain the optimal joint action, reducing the decision error caused by the partially observable condition. Specifically, through the communication network, the chain propagation of graph attention networks (GAT) and graph convolutional networks is used to expand the receptive domain of agents, improve communication efficiency and promote cooperative behavior. We simulate the traffic situation near the Nanjing Yangtze River Bridge in Simulation of Urban MObility. With a compound reward, our method performs best. Meanwhile, AGRCNet is applied to two abstract environments, and the results show that our approach can also adapt to dynamic agent relationships and is more efficient than comparison algorithms. [ABSTRACT FROM AUTHOR]

Traffic congestion is a major concern in urban centers, as it can affect society, the environment, and the economy. There are many studies on the use of computational intelligence (CI) to improve mobility in urban centers. Some of these researches focus on developing strategies for traffic light programming, since traffic coordination is complex due to its many parameters, variables, and dynamic behavior, and also an inefficient traffic control plan can lead to increased delays and contribute to traffic congestion. Although there are many works in the literature on strategies for traffic control, there are still some contributions and gaps to be filled, especially because some studies do not consider the automatic optimization of traffic signals in real time, that is, according to the demand of vehicles on the roads, considering multiple objectives and the use of a network of intersections in their experiments. In addition, some of the proposed models are not independent of simulation to evaluate the solutions of CI algorithms, resulting in a more complex deployment in real situations. In this context, this paper presents a new method to optimize traffic light plan in a network of intersections and in real time, called Active Control of Traffic Signals (ACTS) associated with the Non-Dominated Sorting Genetic Algorithm, considering multiple objectives in the optimization process (minimizing the average delay time and the number of vehicles stops per cycle). To test the applicability of the model, a real dataset of vehicle demand collected by the Company of Transport and Traffic of Belo Horizonte (BHTrans) is loaded into the AIMSUN simulator, then the method is applied and compared with the current traffic control plan used by BHTrans. The results show that the ACTS method reduces the average vehicle delay by almost half compared to the results obtained with the current solution used by BHTrans. In real life, this means less time spent in traffic, which promotes faster traffic flow, reducing traffic congestions. [ABSTRACT FROM AUTHOR]

Since high-quality real data acquired from selected road sections are not always available, a traffic control solution can use data from software traffic simulators working offline. The results show that in contrast to microscopic traffic simulation, the algorithms employing neural networks can work in real-time, so they can be used, among others, to determine the speed displayed on variable message road signs. This paper describes an experiment to develop and test machine learning models, i.e., long short-term memory, gated recurrent unit recurrent networks, and stacked autoencoder networks. It compares their effectiveness with traffic prediction results generated using a widely recognized traffic simulator that analyzes traffic at the level of individual vehicles. [ABSTRACT FROM AUTHOR]

Intelligent traffic light control (ITLC) algorithms are very efficient for relieving traffic congestion. Recently, many decentralized multi-agent traffic light control algorithms are proposed. These researches mainly focus on improving reinforcement learning method and coordination method. But, as all the agents need to communicate while coordinating with each other, the communication details should be improved as well. To guarantee communication effectiveness, two aspect should be considered. Firstly, a traffic condition description method need to be designed. By using this method, traffic condition can be described simply and clearly. Secondly, synchronization should be considered. As different intersections have different cycle lengths and message sending event happens at the end of each traffic signal cycle, every agent will receive messages of other agents at different time. So it is hard for an agent to decide which message is the latest one and the most valuable. Apart from communication details, reinforcement learning algorithm used for traffic signal timing should also be improved. In the traditional reinforcement learning based ITLC algorithms, either queue length of congested cars or waiting time of these cars is considered while calculating reward value. But, both of them are very important. So a new reward calculation method is needed. To solve all these problems, in this paper, a new ITLC algorithm is proposed. To improve communication efficiency, this algorithm adopts a new message sending and processing method. Besides, to measure traffic congestion in a more reasonable way, a new reward calculation method is proposed and used. This method takes both waiting time and queue length into consideration. [ABSTRACT FROM AUTHOR]

This study investigates how adaptable Machine Learning Traffic Signal control methods are to topological variability. We ask how well can these methods generalize to non-Manhattan-like networks with non-uniform distances between intersections. A Machine Learning method that is highly reliable in various topologies is proposed and compared with state-of-the-art alternatives. Lastly, we analyze the sustainability of different traffic signal control methods based on computational efforts required to achieve convergence and perform training and testing. We show that our method achieves an approximately seven-fold improvement in terms of CO 2 emitted in training over the second-best method. [ABSTRACT FROM AUTHOR]

Traffic congestion is becoming a serious problem with the large number of vehicle on the roads. In the traditional traffic control system, the timing of the green light is adjusted regardless of the average traffic rate at the junction. Many strategies have been introduced to solve and improve vehicle management. However, in order to handle road traffic issues, an intelligent traffic management solution is required. This article represents a self adaptive real-time traffic light control algorithm based on the traffic flow. We present a machine learning approach coupled with image processing to manage the traffic clearance at the signal junction. The proposed system utilizes single image processing via neural network and You Only Look Once (YOLOv3) framework to establish traffic clearance at the signal. We employed YOLO architectures because it is accurate in terms of mean average precision (mAP), interaction over union (IOU) values and fast in object detection tasks as well. It runs significantly faster than other detection methods with comparable performance. The average processing time of single image was estimated to be 1.3 s. Further based on the input from YOLO we estimated the 'on' time period green light for effective traffic clearance. Several real time parameters like number of vehicles (two wheelers, four wheelers), road width and junction crossing time are considered to estimate the 'on'time of green light. Moreover, we used the real traffic images to test the performance and trained the system with different dataset. Our experiments investigation reveals that the predicted vehicle counts were well matched with the actual vehicle count and proposed method apprehended an average accuracy of 81.1%. The reported strategy is self adaptive, highly accurate, fast and has the potential to be implemented in the traffic clearance at the junctions. [ABSTRACT FROM AUTHOR]

Though effective in theoretical simulation, the established traffic control models and optimization algorithms will result in model mismatch or even control strategy failure in actual application. However, they are commonly adopted in traffic signal control research, resulting in the unavailability of many exceptional control algorithms in practice. Simulation should function as a bridge between theoretical research and actual application, allowing the gap between the two to be communicated and made up for. However, an effective connection between the two has yet to be established to enable simulation methods in existing traffic control research. To this end, we designed and developed a simulation platform for "Online Application—HILS (Hardware-in-the-Loop Simulation)—Practice" integration over traffic signal control. In this paper, the architecture and characteristics of the integrated simulation platform were described. Besides, the function of each module of the platform was detailed, followed by listing simulation examples for six complex scenarios, with the active control scenario being selected for simulation comparison analysis. The findings demonstrated extensive road network simulation with the integrated simulation platform, multidimensional control variables, control strategies with support, as well as stable and reliable operation. It can be used to verify several sorts of traffic control simulation with variable dimensions. [ABSTRACT FROM AUTHOR]

Though effective in theoretical simulation, the established traffic control models and optimization algorithms will result in model mismatch or even control strategy failure in actual application. However, they are commonly adopted in traffic signal control research, resulting in the unavailability of many exceptional control algorithms in practice. Simulation should function as a bridge between theoretical research and actual application, allowing the gap between the two to be communicated and made up for. However, an effective connection between the two has yet to be established to enable simulation methods in existing traffic control research. To this end, we designed and developed a simulation platform for "Online Application—HILS (Hardware-in-the-Loop Simulation)—Practice" integration over traffic signal control. In this paper, the architecture and characteristics of the integrated simulation platform were described. Besides, the function of each module of the platform was detailed, followed by listing simulation examples for six complex scenarios, with the active control scenario being selected for simulation comparison analysis. The findings demonstrated extensive road network simulation with the integrated simulation platform, multidimensional control variables, control strategies with support, as well as stable and reliable operation. It can be used to verify several sorts of traffic control simulation with variable dimensions. [ABSTRACT FROM AUTHOR]

Traffic lights are an important controlling factor in traffic flows, and good policies will facilitate traffic congestion. A car's waiting time is highly related to the period in which the traffic lights are green or red; thus, a proper controlling policy reduces the waiting time and speeds up the car movement. Emergency vehicles always have a higher priority than other cars and need to reach their destination faster. In the last decade, a lot of research has been done to solve the traffic light scheduling issue using artificial intelligence techniques. Reinforcement learning with simulating human learning has the outstanding performance to solve complex problems, such as traffic lights control. In this study, a deep reinforcement learning traffic light control was implemented at a crossroad using real-time traffic information with an emphasis on emergency vehicles. The agent learns to adjust its policies to prioritize the emergency cars over the other cars. The results show less waiting time and speed up the cars' movement. It also indicates the emergency vehicles will cross the intersection with the least delay. With 200 to 600 cars and one emergency vehicle, the average delay decreases 2–16% in total using reinforcement learning. Considering more emergency vehicles, there is a 27–40% decrease in average delay for emergency vehicles. [ABSTRACT FROM AUTHOR]

Urban mobility is one of the critical challenges in modern cities that should be tackled carefully. The exponential growth of cars number badly impacts the transportation system (TS) on which most cities are living on. Traffic control is one of the most critical issues in TS, which depends on a set of cooperative traffic lights. Smart Traffic lights, which can receive and analyze traffic data, can solve traffic problems by efficiently predict the accurate waiting time for each traffic lane at the intersections. This can improve the traffic flow and accordingly promotes the transportation system performance. This paper introduces a Fog-Based Traffic Light Management Strategy (TLMS) based on Fuzzy Inference Engine. TLMS can accurately calculate the optimal waiting time for each traffic lane at the intersections to decrease the average waiting time for the stopped vehicles. TLMS applies Vehicle to infrastructure protocol (V2I) that allows vehicles to interact directly with the infrastructure of the road such as GPS sensors and the traffic light signals. At each traffic intersection, the number of waiting vehicles, their locations relative to TLMS, and their sizes are detected and sent to TLMS in real time. Then, based on fuzzy inference, TLMS can calculate the optimal waiting time for each lane, which optimizes the traffic flow at the intersection by minimizing the waiting time for the vehicles. The performance of the proposed TLMS has been compared and tested against recently proposed techniques via simulation. The results of the experiment showed that TLMS outperforms recent technologies as it minimizes the average waiting time of vehicles around the intersections and accordingly maximizes the performance of the traffic system. [ABSTRACT FROM AUTHOR]

Because of the population increasing so high, and traffic density remaining the same, traffic prediction has become a great challenge today. Creating a higher degree of communication in automobiles results in the time wastage, fuel wastage, environmental damage, and even death caused by citizens being trapped in the middle of traffic. Only a few researchers work in traffic congestion prediction and control systems, but it may provide less accuracy. So, this paper proposed an efficient IoT-based traffic prediction using OWENN algorithm and traffic signal control system using Intel 80,286 microprocessor for a smart city. The proposed system consists of '5' phases, namely IoT data collection, feature extraction, classification, optimized traffic IoT values, and traffic signal control system. Initially, the IoT traffic data are collected from the dataset. After that, traffic, weather, and direction information are extracted, and these extracted features are given as input to the OWENN classifier, which classifies which place has more traffic. Suppose one direction of the place has more traffic, it optimizes the IoT values by using IBSO, and finally, the traffic is controlled by using Intel 80,286 microprocessor. An efficient OWENN algorithm for traffic prediction and traffic signal control using a Intel 80,286 microprocessor for a smart city. After extracting the features, the classification is performed in this step. Hereabout, the classification is done by using the optimized weight Elman neural network (OWENN) algorithm that classifies which places have more traffic. OWENN attains 98.23% accuracy than existing model also its achieved 96.69% F-score than existing model. The experimental results show that the proposed system outperforms state-of-the-art methods. [ABSTRACT FROM AUTHOR]

Vehicle traffic in large cities is increasing every day. Despite the significant development of telecommunications, communication between such vehicles must still evolve to make mobility smarter. Many studies have been carried out to enable a network between vehicles and computational infrastructures, called Vehicular Ad-Hoc Networks (VANETs). Within the context of VANETs, traffic lights can play an important role in exchanging information with vehicles to reduce congestion. Intelligent traffic lights aim to manage intersections in urban traffic and avoid idle roads. Several research topics have already been explored related to smart traffic control such as network latency, people safety, driver assistance, among others. However, given the variety of problems and solutions, it is complex to identify research trends and gaps related to smart traffic field without a systematic review. This paper presents a systematic review of smart traffic in the context of VANETs. The paper selection was started with 1117 works followed with three processes of refinement wherein 115 papers were selected to thorough revision. The remaining 115 papers were cataloged and classified according to three criteria general focus, evaluation method, and communication type. The review revealed research gaps and trends in the area of smart traffic. This work provides a list of references to find the mapped papers, thus being able to guide more reliable research studies. Besides, we identify research challenges and directions based on the set of papers that were studied. The research challenges are presented according to the main topics explored in this systematic review: security, physical safety of people and protocols. [ABSTRACT FROM AUTHOR]

In recent years, due to the drastic rise in the number of vehicles and the lack of sufficient infrastructure, traffic jams, air pollution, and fuel consumption have increased in cities. The optimization of timing for traffic lights is one of the solutions for the mentioned problems. Many methods have been introduced to deal with these problems, including reinforcement learning. Although a great number of learning-based methods have been used in traffic signal control, they suffer from poor performance and slow learning convergence. In this paper, a transfer learning-based method for traffic signal control has been proposed. Multi-agent system has also been used for modelling the traffic network and transfer learning has been used to make reinforcement learning agents transfer their experience to each other. Furthermore, a classifier has been utilized to classify the transferred experiences. The results show that using the proposed method leads to a significant improvement on average delay time and convergence time of the learning process. [ABSTRACT FROM AUTHOR]

This paper presents a formal model of the case study proposed for the ABZ2018 conference, which concerns the Hybrid ERTMS/ETCS Level 3 Standard. This standard allows trains to communicate with a train supervisor to report their integrity and positions, thanks to an onboard train integrity monitoring system. The supervisor assigns trains a movement authority to control traffic and to avoid collisions. The standard also provides for trains that cannot communicate with the supervisor; these trains are detected by sensors on tracks and obey traffic signals set by the supervisor along the trackside. Using communication allows for a finer grain control of the tracks. Our model is derived using stepwise refinement with the Event-B method. We take into account the main features of the case study (VSS management, timers, ERTMS and non-ERTMS trains). Our model is decomposed into four refinements. All proof obligations have been discharged using the Rodin provers, except those related to the computation of the VSS state machine, which was found to be ambiguous (nondeterministic). Our model has been validated using ProB. The main safety property, which is that ERTMS trains do not collide, is proved. Our model focuses on the discrete control logic aspects of the case study. [ABSTRACT FROM AUTHOR]

We show an application of the methods of mathematical logic to the design of a control system for group movement of trains for a railway station. We develop a typical lifecycle of a route (route design, assembly, control over the movement of a train along the route, disassembling the route) that guarantees safe group movement of trains at a station. We construct the model of a route in the form of a logical passability function and the model of a railway station in the form of a logical diagram. Based on these models, we find the set of potentially feasible station routes, states of railroad switches and route traffic lights. We define different relationships between routes: compatible, incompatible, alternative. [ABSTRACT FROM AUTHOR]

Traffic streams in most of the urban areas of developing countries are highly heterogeneous with poor lane discipline. Traffic simulation and optimization packages based on microscopic traffic flow models are popular for modeling traffic flow and optimizing traffic controls all around the globe. However, applying microsimulation packages to model undisciplined and heterogeneous traffic streams may not yield perfect results. But, macroscopic models can be easily calibrated for such heterogeneous and undisciplined traffic streams. This research applies the calibrated Cell Transmission Model (CTM)-based optimization tool to determine optimal signal plans and to evaluate the potential of reduction in control delay at signalized intersections. Most of the traffic signals in Karachi are pre-timed with a constant signal plan throughout the day, despite significant changes in traffic dynamics within a day. This study evaluates the performance of existing signal timing plans at two different locations in Karachi. The selected locations include a segment of urban arterial with three consecutive signals in close proximity. The second location was a standalone signalized intersection. Twelve-hour traffic and delay data on typical working days were collected through video recording technique. The data collected from the field were simulated using CTM-based signal optimization software, DISCO. The optimization results show an improvement of 45% in the existing delay at the selected segment of Khayaban-e-Ittehad. The delay at KDA intersection can be reduced by 29% by optimizing signal plans. The study shows that optimum signal timings based on accurate data can reduce delays and improve traffic network performance. [ABSTRACT FROM AUTHOR]

This paper presents a new method to solve the scheduling problem of adaptive traffic signal control at intersection. The method involves recursive least-squares temporal difference (RLS-TD(λ)) learning that is integrated into approximate dynamic programming. The learning mechanism of RLS-TD(λ) is to make an adaptation of linear function approximation by updating its parameters based on environmental feedback. This study investigates the method implementation after modeling a traffic dynamic system at intersection in discrete time. In the model, different traffic control schemes regarding signal phase sequence are considered, especially the defined adaptive phase sequence (APS). By simulating traffic scenarios, RLS-TD(λ) is superior to TD(λ) for updating functional parameters in the approximation, and APS outperforms other conventional control schemes on reducing traffic delay. By comparing with other traffic signal control algorithms, the proposed algorithm yields satisfying results in terms of traffic delay and computation time. [ABSTRACT FROM AUTHOR]

The development of the Internet of Things facilitates various dimensionalities in a home, industrial and business applications. The integration of sensors and smart objects with accessible infrastructure makes the efficient data processing and decreases the human resource, operating time. The novel smart traffic control framework is proposed using local traffic smart server and remote cloud server to improve the traffic signal processing time that reduces the vehicles' waiting time, congestion and pollution at the roadway intersection. This approach is also capturing the vehicle's transition that is used to track high-speed vehicles. Optimized regression algorithm is proposed to collect multi-path data and compute single-point nifty decision using waiting vehicle density at four-direction roadway intersection. The sensor data is processed using regression algorithm and take the decision to change the lamp onset. The case study implementation has been demonstrated for four-direction roadway by considering the existing infrastructure with Arduino Uno kit and evaluated the smart traffic framework by comparing with normal traffic system. The results prove that proposed framework smooth the progress of hassle-free travel by reducing the waiting time for the green lamp onset, and also can be use the recorded vehicles images to track the high-speed vehicles. [ABSTRACT FROM AUTHOR]

This paper demonstrates the results of field tests for assessing a cooperative intersection signal violation warning system (CISVWS), which consists of (a) hardware, including an in-vehicle warning device, roadside antenna, and traffic signal controller, and (b) software to operate and test the cooperative system through vehicle to infrastructure (V2I) communication systems. Field tests were performed under real traffic situations in order to test the system in terms of the initiation time of the signal violation warning from the signal controller, the activation and duration of on board equipment (OBE), and the warning delay based on the relationships between distance variables, including the safe stopping distance, and the location of road side equipment (RSE). Findings from the field test at the real-world signalized intersection sites indicated that the system would be capable of reducing red light violations and intersection collisions through use of the in-vehicle warning device at signalized intersections. [ABSTRACT FROM AUTHOR]

Constant, clear radio and voice communication is of crucial importance in safe working conditions for traffic controllers. The provision of electronic, level dependent, sound-restoration ear muffs would seem to offer an ideal solution to a working environment where the daily noise exposure is below the regulated level but frequently experiences periods of high continuous and impulsive noise. This report shows that careful thought and good consultation with the intended users must occur before these devices are introduced and accepted into the workplace [ABSTRACT FROM AUTHOR]

This study examined how objective measures of the local road environment related to safety were associated with change in physical activity (including active transport) among youth. Few longitudinal studies have examined the impact of the road environment on physical activity among children/adolescents in their neighborhoods. Participants were children aged 8–9 years ( n = 170) and adolescents aged 13–15 years ( n = 276) in 2004. Data were collected in 2004 and 2006 during follow-up of participants recruited initially in 2001 from 19 primary schools in Melbourne, Australia. Walking/cycling to local destinations was parent-reported for children and self-reported by adolescents. Moderate-to-vigorous physical activity (MVPA) during nonschool hours was recorded using accelerometers. Road environment features in each participant’s neighborhood (area within 800 m radius of their home) were measured objectively using a Geographical Information System. Linear regression analyses examined associations between road features and changes in active transport (AT) and MVPA over 2 years. Children’s AT increased but MVPA levels decreased in both age groups; on average, younger girls recorded the greatest declines. The number of traffic/pedestrian lights was associated with ΔAT among younger girls (B=0.45, p=0.004). The total length of walking tracks (in meters) was associated with ∆AT among younger girls ( B = 0.0016, p = 0.015) and adolescent girls ( B = 0.0016, p = 0.002). For adolescent boys, intersection density was associated with ∆AT ( B = 0.03, p = 0.030). Slow points were associated with ∆MVPA among younger boys before school ( B = 1.55, p = 0.021), while speed humps were associated with ∆MVPA among adolescent boys after school ( B = 0.23, p = 0.015). There were many associations for adolescent girls: for example, the total length of local roads ( B = 0.49, p = 0.005), intersection density ( B = 0.05, p = 0.036), and number of speed humps ( B = 0.33, p = 0.020) were associated with ∆MVPA during nonschool hours. Safety-related aspects of the built environment are conducive to physical activity among youth and may help stem age-related declines in physical activity. Passive road safety interventions may promote AT and physical activity among less active girls, in particular. [ABSTRACT FROM AUTHOR]

Introduction: Due to the menacing increase in the number of vehicles on a daily basis, abating road congestion is becoming a key challenge these years. To cope-up with the prevailing traffic scenarios and to meet the ever-increasing demand for traffic, the urban transportation system needs effective solution methodologies. Changes made in the urban infrastructure will take years, sometimes may not even be feasible. For this reason, traffic signal timing (TST) optimization is one of the fastest and most economical ways to curtail congestion at the intersections and improve traffic flow in the urban network. Purpose: Researchers have been working on using a variety of approaches along with the exploitation of technology to improve TST. This article is intended to analyze the recent literature published between January 2015 and January 2020 for the computational intelligence (CI) based simulation approaches and CI-based approaches for optimizing TST and Traffic Signal Control (TSC) systems, provide insights, research gaps and possible directions for future work for researchers interested in the field. Methods: In analyzing the complex dynamic behavior of traffic streams, simulation tools have a prominent place. Nowadays, microsimulation tools are frequently used in TST related researches. For this reason, a critical review of some of the widely used microsimulation packages is provided in this paper. Conclusion: Our review also shows that approximately 77% of the papers included, utilizes a microsimulation tool in some form. Therefore, it seems useful to include a review, categorization, and comparison of the most commonly used microsimulation tools for future work. We conclude by providing insights into the future of research in these areas. [ABSTRACT FROM AUTHOR]

Background: The intersection traffic signal control problem (ITSCP) has become even more important as traffic congestion has been more intractable. The ITSCP seeks an efficient schedule for traffic signal settings at intersections with the goal of maximizing traffic flow while considering various factors such as real-time strategies, signal timing constraints, rapid developments in traffic systems, and practical implementation. Since the factors constituting the ITSCP exhibit stochastically complicated interactions, it is essential to identify these factors to propose solution methods that can address this complexity and still be practically implemented. Objective: The objective of this review is to provide a survey of problems, methods, and practices in the evaluation of the ITSCP. In this paper, a unified terminology for the ITSCP and a citation network of the current body of relevant research are accordingly presented, and various assumptions, constraints, and solution approaches are summarized. A review across the entire body of knowledge throughout the history of the ITSCP is therefore provided. This review also highlights open issues and challenges that remain to be addressed by future research. [ABSTRACT FROM AUTHOR]

Quadratic unconstrained binary optimization (QUBO) is the mathematical formalism for phrasing and solving a class of optimization problems that are combinatorial in nature. Due to their natural equivalence with the two-dimensional Ising model for ferromagnetism in statistical mechanics, problems from the QUBO class can be solved on quantum annealing hardware. In this paper, we report a QUBO formatting of the problem of optimal control of time-dependent traffic signals on an artificial grid-structured road network so as to ease the flow of traffic, and the use of D-Wave Systems' quantum annealer to solve it. Since current-generation D-Wave annealers have a limited number of qubits and limited inter-qubit connectivity, we adopt a hybrid (classical/quantum) approach to this problem. As traffic flow is a continuous and evolving phenomenon, we address this time-dependent problem by adopting a workflow to generate and solve multiple problem instances periodically. [ABSTRACT FROM AUTHOR]