Search

Adaptive analog beamforming is a key technology to enable spatial control of millimeter-wave wireless signals radiated from phased array antennas (PAAs) which is essential to maximize the capacity of future mobile networks and to ensure efficient usage of scarce spectrum. Intermediate frequency-over-fiber (IFoF), on the other hand, is a promising technology for the millimeter-wave (mm-wave) mobile fronthaul due to its low complexity, high optical spectral efficiency, and low latency. The combination of IFoF and PAA is key to implement mm-wave mobile communications in a scalable, centralized, efficient, and reliable manner. This work presents, for the first time to the best of the authors' knowledge, an extensive outdoor measurement campaign where an experimental IFoF mm-wave wireless setup is evaluated by using PAAs with adaptive beamforming on the transmitter and receiver sides. The configuration of the experimental setup is according to 5G standards, transmitting signals wirelessly at 27 GHz central frequency in the n258 band. The employed PAAs are composed of 8-by-8 patch antenna arrays, allowing beam steering in the azimuth and elevation angles. Furthermore, different end-user locations, antenna configurations, and wireless scenarios are tested in the outdoor experiment, showing excellent EVM performance and achieving 64-QAM transmission over up to 165.5 m at up to 1.88 Gbit/s. The experimental results enable optimization of the experimental setup for different scenarios and prove the system's reliability in different wireless conditions. In addition, the results of this work prove the viability and potential of IFoF combined with PAA to be part of the future 5G/6G structure. [ABSTRACT FROM AUTHOR]

Singular value decomposition (SVD) beamforming is an attractive tool for reducing the energy consumption of data transmissions in wireless sensor networks whose nodes are equipped with multiple antennas. However, this method is often not practical due to two important shortcomings: it requires channel state information at the transmitter and the computation of the SVD of the channel matrix is generally too complex. To deal with these issues, we propose a method for establishing an SVD beamforming link without requiring feedback of actual channel or SVD coefficients to the transmitter. Concretely, our method takes advantage of channel reciprocity and a power iteration algorithm (PIA) for determining the precoding and decoding singular vectors from received preamble sequences. A low-complexity version that performs no iterations is proposed and shown to have a signal-to-noise-ratio (SNR) loss within 1 dB of the bit error rate of SVD beamforming with least squares channel estimates. The low-complexity method significantly outperforms maximum ratio combining diversity and Alamouti coding. We also show that the computational cost of the proposed PIA-based method is less than the one of using the Golub–Reinsch algorithm for obtaining the SVD. The number of computations of the low-complexity version is an order of magnitude smaller than with Golub–Reinsch. This difference grows further with antenna array size. [ABSTRACT FROM AUTHOR]

To address the increasing data rate demands for future wireless networks, a dense deployment of base stations or access points is the most promising approach; however, doing so may cause high intercell interference (ICI). Numerous interference coordination (IC) approaches have been proposed to reduce ICI. Conducting 5G communication on millimeter wave (mmWave) bands is more complex because of its higher propagation losses and greater attenuation variance, all of which depend on environment change. Massive antenna arrays with beamforming techniques can be used to overcome high propagation loss, reduce interference, deliver performance gains of coordination without a high overhead, and deliver high network capacity with multiplex transmitters. The central challenge of a massive antenna array that uses beamforming techniques is coordinating the users and beams for each transmitter within a large network. To address this challenge, we propose a novel two-level beamforming coordination approach that partitions a large network into clusters. At the intracluster level, this approach performs intracluster coordination similar to the user selection algorithms in a multiuser multiple input and multiple output (MU-MIMO); doing this maximizes the utility function or minimizes the signal-to-interference-plus-noise ratio (SINR) function within a cluster. A dynamic time domain IC approach is employed at the intercluster level, collecting interference information for cluster-edge user equipment (UE) and allocating the UE dynamically among the clusters to reduce the intercluster interference for a switched-beam system (SBS). Simulation results show that the proposed two-level IC approach achieves a higher edge user performance or cell capacity than with the current uncoordinated/coordinated approaches. [ABSTRACT FROM AUTHOR]

This paper investigates the multi-cell coordinated beamforming (MCBF) design for secure simultaneous wireless information and power transfer (SWIPT) in both centralized and distributed manners. In each cell, one transmitter serves multiple information receivers (IRs) and energy receivers (ERs) with the non-linear energy harvesting (EH) model. Meanwhile, several eavesdroppers (Eves) intend to intercept the confidential information transmitted for IRs. To achieve a secure transmission, the artificial noise (AN) is embedded in the transmit signals of each transmitter. The proposed design is formulated into a power-minimization problem to guarantee the IRs’ information and ERs’ energy requirements while avoiding the information being intercepted by Eves. Since the problem is non-convex and not easy to solve, a solution method based on semi-definition relaxation (SDR) is proposed and the global optimum is proved to be guaranteed with full channel state information (CSI). We further present a distributed AN-aided MCBF for the system by using alternating direction method of multipliers (ADMM), with which each transmitter is able to calculate its own beamforming vectors and AN covariance matrix based on its local CSI. Simulation results show that our proposed distributed design converges to the global optimum obtained by the centralized one. It is also shown that by employing AN, the total required power of the system is reduced and the effect of AN on the system performance decreases with increment of transmit antennas. Compared with traditional linear EH model, optimizing the system under the non-linear EH one avoids false output power at the ERs and saves power at the transmitter. [ABSTRACT FROM AUTHOR]