Search

Many complex physical systems exhibit a rich variety of discrete behavioural modes. Often, the system complexity limits the applicability of standard modelling tools. Hence, understanding the underlying physics of different behaviours and distinguishing between them is challenging. Although traditional machine learning techniques could predict and classify behaviour well, typically they do not provide any meaningful insight into the underlying physics of the system. In this paper we present a novel method for extracting physically meaningful clusters of discrete behaviour from limited experimental observations. This method obtains a set of physically plausible functions that both facilitate behavioural clustering and aid in system understanding. We demonstrate the approach on the V-shaped falling paper system, a new falling paper type system that exhibits four distinct behavioural modes depending on a few morphological parameters. Using just 49 experimental observations, the method discovered a set of candidate functions that distinguish behaviours with an error of 2.04%, while also aiding insight into the physical phenomena driving each behaviour. [ABSTRACT FROM AUTHOR]

Cooperation among kin is common in animal societies. Kin groups may form by individuals directly discriminating relatives based on kin recognition cues, or form passively through natal philopatry and limited dispersal. We describe the genetic landscape for a primitively eusocial wasp, Polistes dominula, and ask whether individuals choose cooperative partners that are nearby and/or that are genetic relatives. Firstly, we genotyped an entire sub-population of 1361 wasps and found genetic structuring on an extremely fine scale: the probability of finding genetic relatives decreases exponentially within just a few meters of an individual’s nest. At the same time, however, we found a lack of genetic structuring between natural nest aggregations within the population. Secondly, in a separate dataset where ~2000 wasps were genotyped, we show that wasps forced experimentally to make a new nest choice tended to choose new nests near to their original nests, and that these nests tended to contain some full sisters. However, a significant fraction of wasps chose nests that did not contain sisters, despite sisters being present in nearby nests. Although we cannot rule out a role for direct kin recognition or natal nest-mate recognition, our data suggest that kin groups may form via a philopatric rule-of-thumb, whereby wasps simply select groups and nesting sites that are nearby. The result is that most subordinate helpers obtain indirect fitness benefits by breeding cooperatively. [ABSTRACT FROM AUTHOR]

The Semantic Link Network is a general semantic model for modeling the structure and the evolution of complex systems. Various semantic links play different roles in rendering the semantics of complex system. One of the basic semantic links represents cause-effect relation, which plays an important role in representation and understanding. This paper verifies the role of the Semantic Link Network in representing the core of text by investigating the contribution of cause-effect link to representing the core of scientific papers. Research carries out with the following steps: (1) Two propositions on the contribution of cause-effect link in rendering the core of paper are proposed and verified through a statistical survey, which shows that the sentences on cause-effect links cover about 65% of key words within each paper on average. (2) An algorithm based on syntactic patterns is designed for automatically extracting cause-effect link from scientific papers, which recalls about 70% of manually annotated cause-effect links on average, indicating that the result adapts to the scale of data sets. (3) The effects of cause-effect link on four schemes of incorporating cause-effect link into the existing instances of the Semantic Link Network for enhancing the summarization of scientific papers are investigated. The experiments show that the quality of the summaries is significantly improved, which verifies the role of semantic links. The significance of this research lies in two aspects: (1) it verifies that the Semantic Link Network connects the important concepts to render the core of text; and, (2) it provides an evidence for realizing content services such as summarization, recommendation and question answering based on the Semantic Link Network, and it can inspire relevant research on content computing. [ABSTRACT FROM AUTHOR]

In this study, we address the question whether (and to what extent, respectively) altmetrics are related to the scientific quality of papers (as measured by peer assessments). Only a few studies have previously investigated the relationship between altmetrics and assessments by peers. In the first step, we analyse the underlying dimensions of measurement for traditional metrics (citation counts) and altmetrics–by using principal component analysis (PCA) and factor analysis (FA). In the second step, we test the relationship between the dimensions and quality of papers (as measured by the post-publication peer-review system of F1000Prime assessments)–using regression analysis. The results of the PCA and FA show that altmetrics operate along different dimensions, whereas Mendeley counts are related to citation counts, and tweets form a separate dimension. The results of the regression analysis indicate that citation-based metrics and readership counts are significantly more related to quality, than tweets. This result on the one hand questions the use of Twitter counts for research evaluation purposes and on the other hand indicates potential use of Mendeley reader counts. [ABSTRACT FROM AUTHOR]

The need to complete multiple tasks concurrently is a common occurrence both daily life and in occupational activities, which can often include simultaneous cognitive and physical demands. As one example, there is increasing availability of head-worn display technologies that can be employed when a user is mobile (e.g., while walking). This new method of information presentation may, however, introduce risks of adverse outcomes such as a decrement to gait performance. The goal of this study was thus to quantify the effects of a head-worn display (i.e., smart glasses) on motor variability during gait and to compare these effects with those of other common information displays (i.e., smartphone and paper-based system). Twenty participants completed four walking conditions, as a single task and in three dual-task conditions (three information displays). In the dual-task conditions, the information display was used to present several cognitive tasks. Three different measures were used to quantify variability in gait parameters for each walking condition (using the cycle-to-cycle standard deviation, sample entropy, and the “goal-equivalent manifold” approach). Our results indicated that participants used less adaptable gait strategies in dual-task walking using the paper-based system and smartphone conditions compared with single-task walking. Gait performance, however, was less affected during dual-task walking with the smart glasses. We conclude that the risk of an adverse gait event (e.g., a fall) in head-down walking conditions (i.e., the paper-based system and smartphone conditions) were higher than in single-task walking, and that head-worn displays might help reduce the risk of such events during dual-task gait conditions. [ABSTRACT FROM AUTHOR]

Quantifying the impact of a scholarly paper is of great significance, yet the effect of geographical distance of cited papers has not been explored. In this paper, we examine 30,596 papers published in Physical Review C, and identify the relationship between citations and geographical distances between author affiliations. Subsequently, a relative citation weight is applied to assess the impact of a scholarly paper. A higher-order weighted quantum PageRank algorithm is also developed to address the behavior of multiple step citation flow. Capturing the citation dynamics with higher-order dependencies reveals the actual impact of papers, including necessary self-citations that are sometimes excluded in prior studies. Quantum PageRank is utilized in this paper to help differentiating nodes whose PageRank values are identical. [ABSTRACT FROM AUTHOR]

Background: There is widespread evidence that statistical methods play an important role in original research articles, especially in medical research. The evaluation of statistical methods and reporting in journals suffers from a lack of standardized methods for assessing the use of statistics. The objective of this study was to develop and evaluate an instrument to assess the statistical intensity in research articles in a standardized way. Methods: A checklist-type measure scale was developed by selecting and refining items from previous reports about the statistical contents of medical journal articles and from published guidelines for statistical reporting. A total of 840 original medical research articles that were published between 2007–2015 in 16 journals were evaluated to test the scoring instrument. The total sum of all items was used to assess the intensity between sub-fields and journals. Inter-rater agreement was examined using a random sample of 40 articles. Four raters read and evaluated the selected articles using the developed instrument. Results: The scale consisted of 66 items. The total summary score adequately discriminated between research articles according to their study design characteristics. The new instrument could also discriminate between journals according to their statistical intensity. The inter-observer agreement measured by the ICC was 0.88 between all four raters. Individual item analysis showed very high agreement between the rater pairs, the percentage agreement ranged from 91.7% to 95.2%. Conclusions: A reliable and applicable instrument for evaluating the statistical intensity in research papers was developed. It is a helpful tool for comparing the statistical intensity between sub-fields and journals. The novel instrument may be applied in manuscript peer review to identify papers in need of additional statistical review. [ABSTRACT FROM AUTHOR]

Research paper recommenders emerged over the last decade to ease finding publications relating to researchers’ area of interest. The challenge was not just to provide researchers with very rich publications at any time, any place and in any form but to also offer the right publication to the right researcher in the right way. Several approaches exist in handling paper recommender systems. However, these approaches assumed the availability of the whole contents of the recommending papers to be freely accessible, which is not always true due to factors such as copyright restrictions. This paper presents a collaborative approach for research paper recommender system. By leveraging the advantages of collaborative filtering approach, we utilize the publicly available contextual metadata to infer the hidden associations that exist between research papers in order to personalize recommendations. The novelty of our proposed approach is that it provides personalized recommendations regardless of the research field and regardless of the user’s expertise. Using a publicly available dataset, our proposed approach has recorded a significant improvement over other baseline methods in measuring both the overall performance and the ability to return relevant and useful publications at the top of the recommendation list. [ABSTRACT FROM AUTHOR]

With the rapid development of information technology, scientific social networks (SSNs) have become the fastest and most convenient way for researchers to communicate with each other. Many published papers are shared via SSNs every day, resulting in the problem of information overload. How to appropriately recommend personalized and highly valuable papers for researchers is becoming more urgent. However, when recommending papers in SSNs, only a small amount of positive instances are available, leaving a vast amount of unlabelled data, in which negative instances and potential unseen positive instances are mixed together, which naturally belongs to One-Class Collaborative Filtering (OCCF) problem. Therefore, considering the extreme data imbalance and data sparsity of this OCCF problem, a hybrid approach of Social and Content aware One-class Recommendation of Papers in SSNs, termed SCORP, is proposed in this study. Unlike previous approaches recommended to address the OCCF problem, social information, which has been proved playing a significant role in performing recommendations in many domains, is applied in both the profiling of content-based filtering and the collaborative filtering to achieve superior recommendations. To verify the effectiveness of the proposed SCORP approach, a real-life dataset from CiteULike was employed. The experimental results demonstrate that the proposed approach is superior to all of the compared approaches, thus providing a more effective method for recommending papers in SSNs. [ABSTRACT FROM AUTHOR]

Moderate-to-severe psoriasis is associated with significant comorbidity, an impaired quality of life, and increased medical costs, including those associated with treatments. Systematic reviews (SRs) and meta-analyses (MAs) of randomized clinical trials are considered two of the best approaches to the summarization of high-quality evidence. However, methodological bias can reduce the validity of conclusions from these types of studies and subsequently impair the quality of decision making. As co-authorship is among the most well-documented forms of research collaboration, the present study aimed to explore whether authors’ collaboration methods might influence the methodological quality of SRs and MAs of psoriasis. Methodological quality was assessed by two raters who extracted information from full articles. After calculating total and per-item Assessment of Multiple Systematic Reviews (AMSTAR) scores, reviews were classified as low (0-4), medium (5-8), or high (9-11) quality. Article metadata and journal-related bibliometric indices were also obtained. A total of 741 authors from 520 different institutions and 32 countries published 220 reviews that were classified as high (17.2%), moderate (55%), or low (27.7%) methodological quality. The high methodological quality subnetwork was larger but had a lower connection density than the low and moderate methodological quality subnetworks; specifically, the former contained relatively fewer nodes (authors and reviews), reviews by authors, and collaborators per author. Furthermore, the high methodological quality subnetwork was highly compartmentalized, with several modules representing few poorly interconnected communities. In conclusion, structural differences in author-paper affiliation network may influence the methodological quality of SRs and MAs on psoriasis. As the author-paper affiliation network structure affects study quality in this research field, authors who maintain an appropriate balance between scientific quality and productivity are more likely to develop higher quality reviews. [ABSTRACT FROM AUTHOR]

University scientific research ability is an important indicator to express the strength of universities. In this paper, the evaluation of university scientific research ability is investigated based on the output of sci-tech papers. Four university alliances from North America, UK, Australia, and China, are selected as the case study of the university scientific research evaluation. Data coming from Thomson Reuters InCites are collected to support the evaluation. The work has contributed new framework to the issue of university scientific research ability evaluation. At first, we have established a hierarchical structure to show the factors that impact the evaluation of university scientific research ability. Then, a new MCDM method called D-AHP model is used to implement the evaluation and ranking of different university alliances, in which a data-driven approach is proposed to automatically generate the D numbers preference relations. Next, a sensitivity analysis has been given to show the impact of weights of factors and sub-factors on the evaluation result. At last, the results obtained by using different methods are compared and discussed to verify the effectiveness and reasonability of this study, and some suggestions are given to promote China’s scientific research ability. [ABSTRACT FROM AUTHOR]

Many results have been obtained when studying scientific papers citations databases in a network perspective. Articles can be ranked according to their current in-degree and their future popularity or citation counts can even be predicted. The dynamical properties of such networks and the observation of the time evolution of their nodes started more recently. This work adopts an evolutionary perspective and proposes an original algorithm for the construction of genealogical trees of scientific papers on the basis of their citation count evolution in time. The fitness of a paper now amounts to its in-degree growing trend and a “dying” paper will suddenly see this trend declining in time. It will give birth and be taken over by some of its most prevalent citing “offspring”. Practically, this might be used to trace the successive published milestones of a research field. [ABSTRACT FROM AUTHOR]

Background: Sponsors that seek to commercialize new drugs apply to the Food and Drug Administration (FDA) which independently analyzes the raw data and reports the results on its website. Objectives: This study sought to determine if there are differences between the FDA assessments and journal reports on biologic agents developed for the treatment of rheumatoid arthritis. Methods: Available data on FDA-approved drugs were extracted from the website, and a systematic literature search was conducted to identify matching studies in peer-reviewed medical journals. Outcome measures were the American College of Rheumatology response criteria ACR20 (efficacy) and withdrawal due to adverse events (safety). As effect size odds ratios were estimated for each active trial arm vs. control arm (i.e. for both sources: FDA and journal report), followed by calculation of the ratios of the FDA and journal report odds ratios. A ratio of odds ratios not equal to 1 was categorized as a discrepancy. Results: FDA reports were available for 8 of 9 FDA-approved biologic agents for rheumatoid arthritis; all identified trials (34) except one were published in peer-reviewed journals. Overall, discrepancies were noted for 20 of the 33 evaluated trials. Differences in the apparent benefit reporting were found in 39% (24/61) pairwise comparisons and in 11 cases these were statistically significant; the FDA report showed greater benefit than the journal publication in 15 comparisons and lesser benefit in 9. Differences in the reported harms were found in 51% (28/55) pairwise comparisons and were statistically significant in 5. The “signal” in FDA reports showed a less harmful effect than the journal publication in 17 comparisons whereas a more harmful effect in 11. The differences were attributed to differences in analytic approach, patient inclusion, rounding effect, and counting discrepancies. However, no differences were categorized as critical. Conclusion: There was no empirical evidence to suggest biased estimates between the two sources. Increased and detailed transparency in publications would improve the understanding and credibility of published results. Further, the FDA report was found to be a useful source when data are missing in the published report (i.e. reporting bias). [ABSTRACT FROM AUTHOR]

The safety of chemicals, drugs, novel foods and genetically modified crops is often tested using repeat-dose sub-acute toxicity tests in rats or mice. It is important to avoid misinterpretations of the results as these tests are used to help determine safe exposure levels in humans. Treated and control groups are compared for a range of haematological, biochemical and other biomarkers which may indicate tissue damage or other adverse effects. However, the statistical analysis and presentation of such data poses problems due to the large number of statistical tests which are involved. Often, it is not clear whether a “statistically significant” effect is real or a false positive (type I error) due to sampling variation. The author's conclusions appear to be reached somewhat subjectively by the pattern of statistical significances, discounting those which they judge to be type I errors and ignoring any biomarker where the p-value is greater than p = 0.05. However, by using standardised effect sizes (SESs) a range of graphical methods and an over-all assessment of the mean absolute response can be made. The approach is an extension, not a replacement of existing methods. It is intended to assist toxicologists and regulators in the interpretation of the results. Here, the SES analysis has been applied to data from nine published sub-acute toxicity tests in order to compare the findings with those of the author's. Line plots, box plots and bar plots show the pattern of response. Dose-response relationships are easily seen. A “bootstrap” test compares the mean absolute differences across dose groups. In four out of seven papers where the no observed adverse effect level (NOAEL) was estimated by the authors, it was set too high according to the bootstrap test, suggesting that possible toxicity is under-estimated. [ABSTRACT FROM AUTHOR]

In an iterated non-cooperative game, if all the players act to maximize their individual accumulated payoff, the system as a whole usually converges to a Nash equilibrium that poorly benefits any player. Here we show that such an undesirable destiny is avoidable in an iterated Rock-Paper-Scissors (RPS) game involving two rational players, X and Y. Player X has the option of proactively adopting a cooperation-trap strategy, which enforces complete cooperation from the rational player Y and leads to a highly beneficial and maximally fair situation to both players. That maximal degree of cooperation is achievable in such a competitive system with cyclic dominance of actions may stimulate further theoretical and empirical studies on how to resolve conflicts and enhance cooperation in human societies. [ABSTRACT FROM AUTHOR]

Background: The psychometric properties of an online test are not necessarily identical to its paper and pencil original. The aim of this study is to test whether the factor structure of the Community Assessment of Psychic Experiences (CAPE) is measurement invariant with respect to online vs. paper and pencil assessment. Method: The factor structure of CAPE items assessed by paper and pencil (N = 796) was compared with the factor structure of CAPE items assessed by the Internet (N = 21,590) using formal tests for Measurement Invariance (MI). The effect size was calculated by estimating the Signed Item Difference in the Sample (SIDS) index and the Signed Test Difference in the Sample (STDS) for a hypothetical subject who scores 2 standard deviations above average on the latent dimensions. Results: The more restricted Metric Invariance model showed a significantly worse fit compared to the less restricted Configural Invariance model (χ2(23) = 152.75, p<0.001). However, the SIDS indices appear to be small, with an average of −0.11. A STDS of −4.80 indicates that Internet sample members who score 2 standard deviations above average would be expected to score 4.80 points lower on the CAPE total scale (ranging from 42 to 114 points) than would members of the Paper sample with the same latent trait score. Conclusions: Our findings did not support measurement invariance with respect to assessment method. Because of the small effect sizes, the measurement differences between the online assessed CAPE and its paper and pencil original can be neglected without major consequences for research purposes. However, a person with a high vulnerability for psychotic symptoms would score 4.80 points lower on the total scale if the CAPE is assessed online compared to paper and pencil assessment. Therefore, for clinical purposes, one should be cautious with online assessment of the CAPE. [ABSTRACT FROM AUTHOR]

Basic color terms used in Mandarin Chinese have been controversial since first discussed by Berlin and Kay in 1969. Previous studies showed much inconsistency on what should be considered as basic color terms in Mandarin Chinese. In the present study, we investigated categories of color rather than merely the color terms used by Taiwanese native Mandarin speakers. Using samples conforming to the Berlin and Kay survey, various colors were chosen from a collection of Natural Color System (NCS) colored papers and mounted on a piece of neutral gray card. The card was then mounted on a touch-screen, under D65 illumination. Thirty-two single-character color related Mandarin terms were selected from a Chinese character database according to frequency of use. Participants were required to select the color sample that matched the term by pressing a virtual button on the touch screen. The results show that certain terms can be directly correlated to basic color terms in English, comparable with the results of Berlin and Kay’s original study and those that followed. However, some terms, such as Mo (墨 ink), Tie (鐵 iron), and Cai (菜vegetable), show a wide spread of term maps and inconsistent use among subjects. Principle component analysis (PCA) procedures were used to analysis the commodity of data among subjects. The findings suggest that the basic color categories among Mandarin Chinese speakers are similar to those found in the World Color Survey (WCS), but are represented by wide-spread and inconsistent color terms among speakers. [ABSTRACT FROM AUTHOR]

Scientists often perceive a trade-off between quantity and quality in scientific publishing: finite amounts of time and effort can be spent to produce few high-quality papers or subdivided to produce many papers of lower quality. Despite this perception, previous studies have indicated the opposite relationship, in which productivity (publishing more papers) is associated with increased paper quality (usually measured by citation accumulation). We examine this question in a novel way, comparing members of the National Academy of Sciences with themselves across years, and using a much larger dataset than previously analyzed. We find that a member’s most highly cited paper in a given year has more citations in more productive years than in in less productive years. Their lowest cited paper each year, on the other hand, has fewer citations in more productive years. To disentangle the effect of the underlying distributions of citations and productivities, we repeat the analysis for hypothetical publication records generated by scrambling each author’s citation counts among their publications. Surprisingly, these artificial histories re-create the above trends almost exactly. Put another way, the observed positive relationship between quantity and quality can be interpreted as a consequence of randomly drawing citation counts for each publication: more productive years yield higher-cited papers because they have more chances to draw a large value. This suggests that citation counts, and the rewards that have come to be associated with them, may be more stochastic than previously appreciated. [ABSTRACT FROM AUTHOR]

The safety of highly aggregated tourist crowds is a challenging and important issue. This paper not only provided a comprehensive analysis of the accidents of highly aggregated tourist crowds but also determined the occurrence mechanism and coping paths. Based on the analysis of multiple cases, we found that the variable status of highly aggregated tourist crowds was the result of the interaction of three main elements: multisource pressure, state mutations and management responses. A series of factors interact and result in accidents, and the lack of a management response or a low-quality management response is the root cause of such accidents. A high-quality management response is a basic safety precaution for highly aggregated tourist crowds. Therefore, forming a virtuous circle of multisource pressure, state mutations and management responses is an effective path for coping with accidents. [ABSTRACT FROM AUTHOR]

Objective: Detection of vascular endothelial growth factor (VEGF) levels in ocular tissue may perhaps provide insight into the role of VEGF in the pathogenesis and progression of diabetic retinopathy (DR). The aim of this study was to evaluate the levels of VEGF in tears and serum amongst type 2 diabetes mellitus (DM) patients. Methods: A comparative cross-sectional study was conducted between August 2016 and May 2018 involving type 2 DM patients with no DR, non-proliferative DR (NPDR), and proliferative DR (PDR). Tear samples were collected using no.41 Whatman filter paper (Schirmer strips) and 5 mL blood samples were drawn by venous puncture. VEGF levels in tears and serum were measured by enzyme-linked immunosorbent assay. Results: A total of 88 type 2 DM patients (no DR: 30 patients, NPDR: 28 patients, PDR: 30 patients) were included in the study. Mean tear VEGF levels were significantly higher in the NPDR and PDR groups (114.4 SD 52.5 pg/mL and 150.8 SD 49.7 pg/mL, respectively) compared to the no DR group (40.4 SD 26.5 pg/mL, p < 0.001). There was no significant difference in the mean serum VEGF levels between the three groups. There was a fair correlation between serum and tear VEGF levels (p = 0.015, r = 0.263). Conclusion: VEGF levels in tears were significantly higher amongst diabetic patients with DR compared to those without DR and were significantly associated with the severity of DR. There was a fair correlation between serum and tear VEGF levels. Detection of VEGF in tears is a good non-invasive predictor test for the severity of DR. A large cohort study is needed for further evaluation. [ABSTRACT FROM AUTHOR]

Fundamental scientific advances can take decades to translate into improvements in human health. Shortening this interval would increase the rate at which scientific discoveries lead to successful treatment of human disease. One way to accomplish this would be to identify which advances in knowledge are most likely to translate into clinical research. Toward that end, we built a machine learning system that detects whether a paper is likely to be cited by a future clinical trial or guideline. Despite the noisiness of citation dynamics, as little as 2 years of postpublication data yield accurate predictions about a paper's eventual citation by a clinical article (accuracy = 84%, F1 score = 0.56; compared to 19% accuracy by chance). We found that distinct knowledge flow trajectories are linked to papers that either succeed or fail to influence clinical research. Translational progress in biomedicine can therefore be assessed and predicted in real time based on information conveyed by the scientific community's early reaction to a paper. [ABSTRACT FROM AUTHOR]

In this paper, we reexamined the typical analysis methods of a visuomotor sequence learning task, namely the ASRT task (J. H. Howard & Howard, 1997). We pointed out that the current analysis of data could be improved by paying more attention to pre-existing biases (i.e. by eliminating artifacts by using new filters) and by introducing a new data grouping that is more in line with the task’s inherent statistical structure. These suggestions result in more types of learning scores that can be quantified and also in purer measures. Importantly, the filtering method proposed in this paper also results in higher individual variability, possibly indicating that it had been masked previously with the usual methods. The implications of our findings relate to other sequence learning tasks as well, and opens up opportunities to study different types of implicit learning phenomena. [ABSTRACT FROM AUTHOR]

Phylogenetic networks generalize phylogenetic trees by allowing the modelization of events of reticulate evolution. Among the different kinds of phylogenetic networks that have been proposed in the literature, the subclass of binary tree-child networks is one of the most studied ones. However, very little is known about the combinatorial structure of these networks. In this paper we address the problem of generating all possible binary tree-child (BTC) networks with a given number of leaves in an efficient way via reduction/augmentation operations that extend and generalize analogous operations for phylogenetic trees, and are biologically relevant. Since our solution is recursive, this also provides us with a recurrence relation giving an upper bound on the number of such networks. We also show how the operations introduced in this paper can be employed to extend the evolutive history of a set of sequences, represented by a BTC network, to include a new sequence. An implementation in python of the algorithms described in this paper, along with some computational experiments, can be downloaded from . [ABSTRACT FROM AUTHOR]

Objective: Studies suggest that parenteral MTX may be more efficacious than the oral form at equivalent doses for the treatment of rheumatoid arthritis. We carried out a meta-analysis to compare the efficacy of oral versus parenteral MTX in RA. Methods: PubMed, Web of Science and Embase were systematically searched from inception to June 8th 2017 and reviewed following PRISMA 2009 guidelines, by two independent reviewers. To be included, trials had to study adults with RA randomized to the same dose of either oral or parenteral MTX. The primary endpoint was ACR20 at 6 months. Intention-to-treat analysis results were used when possible. Data from direct comparisons between oral and parenteral methotrexate quantitatively analyzed using maximum likelihood random effects meta-analysis. Relative treatment effects were generated as an odds ratio [OR] (OR>1 indicated a benefit for parenteral therapy). Results: The search yielded 357 papers or abstracts. After review of titles or abstracts and full text papers, we found 4 that met inclusion criteria with 703 patients randomized. Dose of MTX started at 15mg/week and increased up to 25mg/week. The summary OR for achieving ACR20 using parenteral vs. oral MTX was 3.02 (95% CI 1.41, 6.46), with no significant difference in the risk for all adverse events. Conclusion: Parenteral MTX therapy had significantly higher odds than oral MTX of achieving reduction in disease activity. We propose that parenteral MTX is more effective than weekly oral MTX; its widespread use may lead to better control of disease and a decrease in demand for biologic agents. [ABSTRACT FROM AUTHOR]

The interaction between phenotypic plasticity, e.g. learning, and evolution is an important topic both in Evolutionary Biology and Machine Learning. The evolution of learning is commonly studied in Evolutionary Biology, while the use of an evolutionary process to improve learning is of interest to the field of Machine Learning. This paper takes a different point of view by studying the effect of learning on the evolutionary process, the so-called Baldwin effect. A well-studied result in the literature about the Baldwin effect is that learning affects the speed of convergence of the evolutionary process towards some genetic configuration, which corresponds to the environment-induced plastic response. This paper demonstrates that learning can change the outcome of evolution, i.e., lead to a genetic configuration that does not correspond to the plastic response. Results are obtained both analytically and experimentally by means of an agent-based model of a foraging task, in an environment where the distribution of resources follows seasonal cycles and the foraging success on different resource types is conditioned by trade-offs that can be evolved and learned. This paper attempts to answer a question that has been overlooked: whether learning has an effect on what genotypic traits are evolved, i.e. the selection of a trait that enables a plastic response changes the selection pressure on a different trait, in what could be described as co-evolution between different traits in the same genome. [ABSTRACT FROM AUTHOR]

Past research on the process of extinguishing a fire typically used a traditional linear water jet falling point model and the results ignored external factors, such as environmental conditions and the status of the fire engine, even though the water jet falling point location prediction was often associated with these parameters and showed a nonlinear relationship. This paper constructed a BP (Back Propagation) neural network model. The fire gun nozzle characteristics were included as model inputs, and the water discharge point coordinates were the model outputs; thus, the model could precisely predict the water discharge point with small error and high precision to determine an accurate firing position and allow for the timely adjustment of the spray gun. To improve the slow convergence and local optimality problems of the BP neural network (BPNN), this paper further used a genetic algorithm to optimize the BPNN (GA-BPNN). The BPNN can be used to optimize the weights in the network to train them for global optimization. A genetic algorithm was introduced into the neural network approach, and the water jet landing prediction model was further improved. The simulation results showed that the prediction accuracy of the GA-BP model was better than that of the BPNN alone. The established model can accurately predict the location of the water jet, making the prediction results more useful for firefighters. [ABSTRACT FROM AUTHOR]

Several lifetime distributions have played an important role to fit survival data. However, for some of these models, the computation of maximum likelihood estimators is quite difficult due to presence of flat regions in the search space, among other factors. Several well-known derivative-based optimization tools are unsuitable for obtaining such estimates. To circumvent this problem, we introduce the AdequacyModel computational library version 2.0.0 for the R statistical environment with two major contributions: a general optimization technique based on the Particle Swarm Optimization (PSO) method (with a minor modification of the original algorithm) and a set of statistical measures for assessment of the adequacy of the fitted model. This library is very useful for researchers in probability and statistics and has been cited in various papers in these areas. It serves as the basis for the Newdistns library (version 2.1) published in an impact journal in the area of computational statistics, see . It is also the basis of the Wrapped library (version 2.0), see . A third package making use of the AdequacyModel library can be found in . In addition, the proposed library has proved to be very useful for maximizing log-likelihood functions with complex search regions. The library provides a greater control of the optimization process by introducing a stop criterion based on a minimum number of iterations and the variance of a given proportion of optimal values. We emphasize that the new library can be used not only in statistics but in physics and mathematics as proved in several examples throughout the paper. [ABSTRACT FROM AUTHOR]

Complex network theory has been successful at unveiling the topology of the brain and showing alterations to the network structure due to brain disease, cognitive function and behavior. Functional connectivity networks (FCNs) represent different brain regions as the nodes and the connectivity between them as the edges of a graph. Graph theoretic measures provide a way to extract features from these networks enabling subsequent characterization and discrimination of networks across conditions. However, these measures are constrained mostly to binary networks and highly dependent on the network size. In this paper, we propose a novel graph-to-signal transform that overcomes these shortcomings to extract features from functional connectivity networks. The proposed transformation is based on classical multidimensional scaling (CMDS) theory and transforms a graph into signals such that the Euclidean distance between the nodes of the network is preserved. In this paper, we propose to use the resistance distance matrix for transforming weighted functional connectivity networks into signals. Our results illustrate how well-known network structures transform into distinct signals using the proposed graph-to-signal transformation. We then compute well-known signal features on the extracted graph signals to discriminate between FCNs constructed across different experimental conditions. Based on our results, the signals obtained from the graph-to-signal transformation allow for the characterization of functional connectivity networks, and the corresponding features are more discriminative compared to graph theoretic measures. [ABSTRACT FROM AUTHOR]

Background: Floating catchment methods have recently been applied to identify priority regions for Automated External Defibrillator (AED) deployment, to aid in improving Out of Hospital Cardiac Arrest (OHCA) survival. This approach models access as a supply-to-demand ratio for each area, targeting areas with high demand and low supply for AED placement. These methods incorporate spatial covariates on OHCA occurrence, but do not provide precise AED locations, which are critical to the initial intent of such location analysis research. Exact AED locations can be determined using optimisation methods, but they do not incorporate known spatial risk factors for OHCA, such as income and demographics. Combining these two approaches would evaluate AED placement impact, describe drivers of OHCA occurrence, and identify areas that may not be appropriately covered by AED placement strategies. There are two aims in this paper. First, to develop geospatial models of OHCA that account for and display uncertainty. Second, to evaluate the AED placement methods using geospatial models of accessibility. We first identify communities with the greatest gap between demand and supply for allocating AEDs. We then use this information to evaluate models for precise AED location deployment. Methods: Case study data set consisted of 2802 OHCA events and 719 AEDs. Spatial OHCA occurrence was described using a geospatial model, with possible spatial correlation accommodated by introducing a conditional autoregressive (CAR) prior on the municipality-level spatial random effect. This model was fit with Integrated Nested Laplacian Approximation (INLA), using covariates for population density, proportion male, proportion over 65 years, financial strength, and the proportion of land used for transport, commercial, buildings, recreation, and urban areas. Optimisation methods for AED locations were applied to find the top 100 AED placement locations. AED access was calculated for current access and 100 AED placements. Priority rankings were then given for each area based on their access score and predicted number of OHCA events. Results: Of the 2802 OHCA events, 64.28% occurred in rural areas, and 35.72% in urban areas. Additionally, over 70% of individuals were aged over 65. Supply of AEDs was less than demand in most areas. Priority regions for AED placement were identified, and access scores were evaluated for AED placement methodology by ranking the access scores and the predicted OHCA count. AED placement methodology placed AEDs in areas with the highest priority, but placed more AEDs in areas with more predicted OHCA events in each grid cell. Conclusion: The methods in this paper incorporate OHCA spatial risk factors and OHCA coverage to identify spatial regions most in need of resources. These methods can be used to help understand how AED allocation methods affect OHCA accessibility, which is of significant practical value for communities when deciding AED placements. [ABSTRACT FROM AUTHOR]

Executives act based on their experiences, values, personality and personal interpretation of the situations which they face in their companies. Investigations in the field of Behavioral Corporate Finance have determined that there are some relations between CEOs’ personal traits and financial decisions of large companies, but these results are based on indirect personal trait measurements and on public companies. To see whether such relations also exist between CEOs’ personal traits and the financial structure of large private companies, we used psychometric tests to measure their level of optimism, risk attitude and affect heuristic, collected financial data for a period of fourteen years, and considered the economic situation of the country as a key factor in these relations. This paper reports the relationship of executives’ personal traits with the financial structure of large Spanish companies for the period 2001–2014. We observed that executives’ high optimism (and risk aversion attitude) is positively (negatively) related to long-term debt, whilst positive affect is directly associated to the financial leverage and short-term debt. This paper also reports a change of relations when taking into account the country’s economic situation. In effect, by considering this new variable, executives’ risk aversion is seen to be associated to financial leverage and short-term debt, whilst CEOs’ positive affect is linked to long-term debt. These relations are strongly moderated and they become statistically significant in a contracting economic period. In conclusion, the links between CEOs’ personal traits and financial structure of large private Spanish companies make sense when the effect of the economic situation is taken into account. Furthermore, the awareness of these links helps to understand the financial decisions taken within large Spanish companies. [ABSTRACT FROM AUTHOR]

In epidemiology, gerontology, human development and the social sciences, age-period-cohort (APC) models are used to study the variability in trajectories of change over time. A well-known issue exists in simultaneously identifying age, period and birth cohort effects, namely that the three characteristics comprise a perfectly collinear system. That is, since age = period−cohort, only two of these effects are estimable at a time. In this paper, we introduce an alternative framework for considering effects relating to age, period and birth cohort. In particular, instead of directly modeling age in the presence of period and cohort effects, we propose a risk modeling approach to characterize age-related risk (i.e., a hybrid of multiple biological and sociological influences to evaluate phenomena associated with growing older). The properties of this approach, termed risk-period-cohort (RPC), are described in this paper and studied by simulations. We show that, except for pathological circumstances where risk is uniquely determined by age, using such risk indices obviates the problem of collinearity. We also show that the size of the chronological age effect in the risk prediction model associates with the correlation between a risk index and chronological age and that the RPC approach can satisfactorily recover cohort and period effects in most cases. We illustrate the advantages of RPC compared to traditional APC analysis on 27496 individuals from NHANES survey data (2005–2016) to study the longitudinal variability in depression screening over time. Our RPC method has broad implications for examining processes of change over time in longitudinal studies. [ABSTRACT FROM AUTHOR]

Although interdisciplinarity is often touted as a necessity for modern research, the evidence on the relative impact of sectorial versus to interdisciplinary science is qualitative at best. In this paper we leverage the bibliographic data set of the American Physical Society to quantify the role of interdisciplinarity in physics, and that of talent and luck in achieving success in scientific careers. We analyze a period of 30 years (1980-2009) tagging papers and their authors by means of the Physics and Astronomy Classification Scheme (PACS), to show that some degree of interdisciplinarity is quite helpful to reach success, measured as a proxy of either the number of articles or the citations score. We also propose an agent-based model of the publication-reputation-citation dynamics which reproduces the trends observed in the APS data set. On the one hand, the results highlight the crucial role of randomness and serendipity in real scientific research; on the other, they shed light on a counterintuitive effect indicating that the most talented authors are not necessarily the most successful ones. [ABSTRACT FROM AUTHOR]

Aiming at serving the interdisciplinary demand in network science, this paper introduces a new concept for complex networks, named network stiffness, which is extracted from structural engineering by assuming that a complex network behaves similarly with a structured framework. This analogy allows interpreting that a complex network can resist against any cause attempting to induce deformation changes to the network’s structure, regardless of whether the network is material or not. Within this framework, this paper examines the context of applying the conceptual analogy of stiffness from the field of structural engineering to network science and then it develops computational approaches capturing different aspects of network stiffness so that to be used in complex network analysis. The implementation of these approaches to a real-world network (global inbound tourism network) shows that stiffness can produce interesting insights to complex network analysis about the factors related to changes caused to the structure and the status of a complex network. [ABSTRACT FROM AUTHOR]

This paper aims to demonstrate the impact of coal enterprises’ vertical integration on the performance of innovation corporate social responsibility (ICSR) and to elaborate its specific transmission path through financing structure and market power. This paper takes the data of A-share listed coal company from 2008 to 2017 as samples, uses input-output table method to measure the degree of vertical integration, and explores the relationship between the four factors through multiple linear regression and Bootstrap method. We found that: (1) the vertical integration of coal enterprises has positive incentives for the promotion of ICSR. (2) Financing structure and market power play a chain intermediary role in this process of incentive. (3) In areas with high marketization process, vertical integration has more significant incentive effect on ICSR. The paper extends the research on the relationship between vertical integration and innovation, which provides a reference for the improvement of China’s supply-side reform and corporate social responsibility (CSR) fulfillment policy. It is helpful to promote the sustainable development of the coal industry, stimulate the innovation vitality of enterprises, and improve the fulfillment of CSR. [ABSTRACT FROM AUTHOR]

Social networks influence health-related behavior, such as obesity and smoking. While researchers have studied social networks as a driver for diffusion of influences and behavior, it is less understood how the structure or topology of the network, in itself, impacts an individual's health behavior and wellness state. In this paper, we investigate whether the structure or topology of a social network offers additional insight and predictability on an individual's health and wellness. We develop a method called the Network-Driven health predictor (NetCARE) that leverages features representative of social network structure. Using a large longitudinal data set of students enrolled in the NetHealth study at the University of Notre Dame, we show that the NetCARE method improves the overall prediction performance over the baseline models—that use demographics and physical attributes—by 38%, 65%, 55%, and 54% for the wellness states—stress, happiness, positive attitude, and self-assessed health—considered in this paper. [ABSTRACT FROM AUTHOR]

Tropical tuna support some of the largest and most valuable artisanal and industrial fisheries worldwide, conducted to a large degree with Fish Aggregating Devices (FADs). Yellowfin, bigeye and skipjack are the main tuna species found in mixed aggregations around FADs and they are simultaneously encircled by the purse seining operation. One of the key challenges that purse seine fleets fishing with drifting FADs face in all oceans is to be able to target species in healthy condition such as skipjack, while reducing impacts on bigeye and yellowfin in areas where there is a need to reduce fishing pressure on these species. The present paper explores a technical solution for selective fishing at FADs by means of acoustic equipment used by purse seiners. Acoustic frequency response of skipjack and bigeye tuna were determined at 38, 120 and 200 kHz. Skipjack showed stronger response at higher frequencies. On the contrary, bigeye showed stronger responses at lower frequencies. The robust pattern shown in frequency responses of the two species demonstrates the potential to predict abundance and species proportions based on purely acoustic measures. The paper also addresses the conditions that need to be met to successfully apply this technology for selective fishing as well as other uses of direct acoustic observations to support tuna conservation. [ABSTRACT FROM AUTHOR]

Map-matching technology is a key and difficult technology in the development of vehicle navigation systems. Only by correctly identifying the road segment on which the vehicle is traveling can the navigation system make the right decision. At the same time, the complexity of the road network structure and a variety of error factors have introduced great challenges to map matching and have attracted the attention of many researchers as well. This paper analyzes various map-matching algorithms, determines that the key to the matching performance is the junction matching, performs an in-depth study on the junction-matching problem, and puts forward the junction decision domain model. The model mainly involves information regarding the width of the road segment, the angle between two road segments, the accuracy of GPS and the accuracy of the road network. In this paper, we use this model to improve the map-matching algorithm based on a hidden Markov model (HMM). The experimental results show that the improved matching algorithm can effectively reduce the error rate of junction matching and improve the matching performance of a navigation system. [ABSTRACT FROM AUTHOR]

This paper proposes a new quantum-like method for the binary classification applied to classical datasets. Inspired by the quantum Helstrom measurement, this innovative approach has enabled us to define a new classifier, called Helstrom Quantum Centroid (HQC). This binary classifier (inspired by the concept of distinguishability between quantum states) acts on density matrices—called density patterns—that are the quantum encoding of classical patterns of a dataset. In this paper we compare the performance of HQC with respect to twelve standard (linear and non-linear) classifiers over fourteen different datasets. The experimental results show that HQC outperforms the other classifiers when compared to the Balanced Accuracy and other statistical measures. Finally, we show that the performance of our classifier is positively correlated to the increase in the number of “quantum copies” of a pattern and the resulting tensor product thereof. [ABSTRACT FROM AUTHOR]

In this paper, we present a method to estimate the market parameters modelled by an asymmetric jump diffusion process. The method proposed is based on Kou’s jump diffusion model while the market parameters refer to the market drift, the market volatility, the jump intensity on market price, and the rate of jump occurrence in a consistent manner throughout the entire paper. The model captures the asymmetric nature of the price fluctuation during up trend markets and down trend markets. The results are compared to conventional options to observe the impact of jump effects. The results from simulation show that the asymmetric jump diffusion model can estimate the fair prices of European call options and annuity better than the Black-Scholes model and the symmetric jump diffusion model proposed by Kou and Merton. [ABSTRACT FROM AUTHOR]

Scientific research is often thought of as being conducted by individuals and small teams striving for disciplinary advances. Yet as a whole, this endeavor more closely resembles a complex and integrated system of people, papers, and ideas. Studies of co-authorship and citation networks have revealed important structural properties of researchers and articles, but currently the structure of scientific ideas themselves is not well understood. In this study, we posit that topic networks may be a useful framework for revealing the nature of conceptual relationships. Using this framework, we map the landscape of interconnected research topics covered in the multidisciplinary journal PNAS since 2000, constructing networks in which nodes represent topics of study and edges give the extent to which topics occur in the same papers. The network displays small-world architecture, characterized by regions of dense local connectivity with sparse connectivity between them. In this network, dense local connectivity additionally gives rise to distinct clusters of related topics. Yet notably, these clusters tend not to align with assigned article classifications, and instead contain topics from various disciplines. Using a temporal graph, we find that small-worldness has increased over time, suggesting growing efficiency and integration of ideas. Finally, we define two measures of interdisciplinarity, one of which is found to be positively associated with PNAS’s impact factor. Broadly, this work suggests that complex and dynamic patterns of knowledge emerge from scientific research, and that structures reflecting intellectual integration may be beneficial for obtaining scientific insight. [ABSTRACT FROM AUTHOR]

An extreme learning machine (ELM) is a novel training method for single-hidden layer feedforward neural networks (SLFNs) in which the hidden nodes are randomly assigned and fixed without iterative tuning. ELMs have earned widespread global interest due to their fast learning speed, satisfactory generalization ability and ease of implementation. In this paper, we extend this theory to hypercomplex space and attempt to simultaneously consider multisource information using a hypercomplex representation. To illustrate the performance of the proposed hypercomplex extreme learning machine (HELM), we have applied this scheme to the task of multispectral palmprint recognition. Images from different spectral bands are utilized to construct the hypercomplex space. Extensive experiments conducted on the PolyU and CASIA multispectral databases demonstrate that the HELM scheme can achieve competitive results. The source code together with datasets involved in this paper can be available for free download at . [ABSTRACT FROM AUTHOR]

The changing population age structure has a significant influence on the economy, society, and numerous other aspects of a country. This paper has innovatively applied the method of compositional data forecasting for the prediction of population age changes of the young (aged 0–14), the middle-aged (aged 15–64), and the elderly (aged older than 65) in China, India, and Vietnam by 2030 based on data from 1960 to 2016. To select the best-suited forecasting model, an array of data transformation approaches and forecasting models have been extensively employed, and a large number of comparisons have been made between the aforementioned methods. The best-suited model for each country is identified considering the root mean squared error and mean absolute percent error values from the compositional data. As noted in this study, first and foremost, it is predicted that by the year 2030, China will witness the disappearance of population dividend and get mired in an aging problem far more severe than that of India or Vietnam. Second, Vietnam’s trend of change in population age structure resembles that of China, but the country will sustain its good health as a whole. Finally, the working population of India demonstrates a strong rising trend, indicating that the age structure of the Indian population still remains relatively “young”. Meanwhile, the continuous rise in the proportion of elderly population and the gradual leveling off growth of the young population have nevertheless become serious problems in the world. The present paper attempts to offer crucial insights into the Asian population size, labor market and urbanization, and, moreover, provides suggestions for a sustainable global demographic development. [ABSTRACT FROM AUTHOR]

Computational modeling of engineered gene circuits is an important while challenged task in systems biology. In order to describe and predict the response behaviors of genetic circuits using reliable model parameters, this paper applies an optimal experimental design(OED) method to obtain input signals. In order to obtain informative observations, this study focuses on maximizing Fisher information matrix(FIM)-based optimal criteria and to provide optimal inputs. Furthermore, this paper designs a two-stage optimization with the modified E-optimal criteria and applies harmony search(HS)-based OED algorithm to minimize estimation errors. The proposed optimal identification methodology involves estimation errors and the sample size to pursue a trade-off between estimation accuracy and measurement cost in modeling gene networks. The designed cost function takes two major factors into account, in which experimental costs are proportional to the number of time points. Experiments select two types of synthetic genetic networks to validate the effectiveness of the proposed HS-OED approach. Identification outcomes and analysis indicate the proposed HS-OED method outperforms two candidate OED approaches, with reduced computational effort. [ABSTRACT FROM AUTHOR]

In this paper, we propose a method that estimates an average delay of frames for each queue and finds an optimal number of aggregated Medium Access Control (MAC) Protocol Data Units (MPDUs) to maximize the system throughput with satisfying the delay requirement of each queue when using the Aggregate MPDU (A-MPDU) aggregation in IEEE 802.11ac. The delay is defined as the sum of the queuing delay and the service delay. If few frames in a queue are aggregated, the frames which remain in the queue for next transmissions may violate the target delay because of the overhead for the next transmissions such as the backoff time, Physical Layer Convergence Procedure (PLCP) preamble, and PLCP header. If many of the frames in the queue are aggregated, the frames of the queue and the other queues may violate their target delays because of a long transmission duration and a long channel occupancy. In this paper, we obtain the average delay for each queue and the optimal number of aggregated MPDUs for the delay requirement of each queue in IEEE 802.11ac. At the last, we evaluate and show the performance of our proposed method through simulations. The simulation results show that the proposed method can estimate the average delay for each queue accurately. The simulation results also show that the proposed method can obtain the violation rates on the target delays less than 0.1. Furthermore, the simulation results show that the proposed method can yield higher system throughput than other conventional methods. [ABSTRACT FROM AUTHOR]

Price inflation has outbalanced the income of residents and buyers in major post-industrial city-regions, and real estate has become an important driver of these inequalities. In a context of a resilient inflation of home values during the last two decades in the greater Paris Region, it is critical to examine housing price dynamics to get a better understanding of socioeconomic segregation. This paper aims at presenting spatial analysis of the dynamics of segregation pertaining to inflation, analyzing price and sellers and buyers data. Using interpolation techniques and multivariate analysis, the paper presents a spatial analysis of property-level data from the Paris Chamber of Notaries (1996-2012) in a GIS (159,000 transactions in suburban areas, single family homes only). Multivariate analysis capture price change and local trajectories of occupational status, i.e. changes in balance between inward and outward flows of sellers and buyers. We adopt a method that fits the fragmented spatial patterns of suburbanization. To do so, we remove the spatial bias by means of a regular 1-km spatial grid, interpolating the variables within it, using a time-distance matrix. The main results are threefold. We document the spatial patterns of professionalization (a rise of executives, intermediate occupation and employees) to describe the main trends of inward mobility in property ownership in suburbs, offsetting the outward mobility of retired persons. Second, neighborhood trajectories are related the diverging patterns of appreciation, between local contexts of accumulation with a growth of residential prices, and suburbs with declining trends. The maturity of suburbanization yields a diversified structure of segregation between the social groups, that do not simply oppose executives vs. blue collar suburbs. A follow-up research agenda is finally outlined. [ABSTRACT FROM AUTHOR]

To solve the problem of the deadline-constrained task scheduling in the cloud computing system, this paper proposes a deadline-constrained scheduling algorithm for cloud computing based on the driver of dynamic essential path (Deadline-DDEP). According to the changes of the dynamic essential path of each task node in the scheduling process, the dynamic sub-deadline strategy is proposed. The strategy assigns different sub-deadline values to every task node to meet the constraint relations among task nodes and the user’s defined deadline. The strategy fully considers the dynamic sub-deadline affected by the dynamic essential path of task node in the scheduling process. The paper proposed the quality assessment of optimization cost strategy to solve the problem of selecting server for each task node. Based on the sub-deadline urgency and the relative execution cost in the scheduling process, the strategy selects the server that not only meets the sub-deadline but also obtains much lower execution cost. In this way, the proposed algorithm will make the task graph complete within its deadline, and minimize its total execution cost. Finally, we demonstrate the proposed algorithm via the simulation experiments using Matlab tools. The experimental results show that, the proposed algorithm produces remarkable performance improvement rate on the total execution cost that ranges between 10.3% and 30.8% under meeting the deadline constraint. In view of the experimental results, the proposed algorithm provides better-quality scheduling solution that is suitable for scientific application task execution in the cloud computing environment than IC-PCP, DCCP and CD-PCP. [ABSTRACT FROM AUTHOR]

In a recidivism prediction context, there is no consensus on which modeling strategy should be followed for obtaining an optimal prediction model. In previous papers, a range of statistical and machine learning techniques were benchmarked on recidivism data with a binary outcome. However, two important tree ensemble methods, namely gradient boosting and random forests were not extensively evaluated. In this paper, we further explore the modeling potential of these techniques in the binary outcome criminal prediction context. Additionally, we explore the predictive potential of classical statistical and machine learning methods for censored time-to-event data. A range of statistical manually specified statistical and (semi-)automatic machine learning models is fitted on Dutch recidivism data, both for the binary outcome case and censored outcome case. To enhance generalizability of results, the same models are applied to two historical American data sets, the North Carolina prison data. For all datasets, (semi-) automatic modeling in the binary case seems to provide no improvement over an appropriately manually specified traditional statistical model. There is however evidence of slightly improved performance of gradient boosting in survival data. Results on the reconviction data from two sources suggest that both statistical and machine learning should be tried out for obtaining an optimal model. Even if a flexible black-box model does not improve upon the predictions of a manually specified model, it can serve as a test whether important interactions are missing or other misspecification of the model are present and can thus provide more security in the modeling process. [ABSTRACT FROM AUTHOR]

Lower back pain is a major public health problem. Despite claims that lumbar belts change spinal posture due to applied pressure on the trunk, no mechanical model has yet been published to prove this treatment. This paper describes a first model for belt design, based on the one hand on the mechanical properties of the fabrics and the belt geometry, and on the other hand on the trunk geometrical and mechanical description. The model provides the estimation of the pressure applied to the trunk, and a unique indicator of the belt mechanical efficiency is proposed: pressure is integrated into a bending moment characterizing the belt delordosing action on the spine. A first in-silico clinical study of belt efficiency for 15 patients with 2 different belts was conducted. Results are very dependent on the body shape: in the case of high BMI patients, the belt effect is significantly decreased, and can be even inverted, increasing the lordosis. The belt stiffness proportionally increases the pressure applied to the trunk, but the influence of the design itself on the bending moment is clearly outlined. Moreover, the belt/trunk interaction, modeled as sticking contact and the specific way patients lock their belts, dramatically modifies the belt action. Finally, even if further developments and tests are still necessary, the model presented in this paper seems suitable for in-silico pre-clinical trials on real body shapes at a design stage. [ABSTRACT FROM AUTHOR]

This paper proposes a mixture regression model-based method for drug sensitivity prediction. The proposed method explicitly addresses two fundamental issues in drug sensitivity prediction, namely, population heterogeneity and feature selection pertaining to each of the subpopulations. The mixture regression model is estimated using the imputation-conditional consistency algorithm, and the resulting estimator is consistent. This paper also proposes an average-BIC criterion for determining the number of components for the mixture regression model. The proposed method is applied to the CCLE dataset, and the numerical results indicate that the proposed method can make a drastic improvement over the existing ones, such as random forest, support vector regression, and regularized linear regression, in both drug sensitivity prediction and feature selection. The p-values for the comparisons in drug sensitivity prediction can reach the order O(10−8) or lower for the drugs with heterogeneous populations. [ABSTRACT FROM AUTHOR]

This paper presents a method to reduce a set of n 2D points to a smaller set of s 2D points with the property that the convex hull on the smaller set is the same as the convex hull of the original bigger set. The paper shows, experimentally, that such reduction accelerates computations; the time it takes to reduce from n down to s points plus the time of computing the convex hull on the s points is less than the time to compute the convex hull on the original set of n points. The method accepts 2D points expressed as real numbers and thus extends our previous method that required points as integers. The method achieves a percentage of reduction of points of over 90% in a collections of four datasets. This amount of reduction provides speedup factors of at least two for various common convex hull algorithms. Theoretically, the reduction method executes in time within O(n) and thus is suitable for preprocessing 2D data before computing the convex hull by any known algorithm. [ABSTRACT FROM AUTHOR]