Search

Optical multi-band (OMB) systems exploit the low-loss spectrum of the single mode fiber (SMF) and are key enablers to increase the transportation capacity and node connectivity of already deployed systems. The realization of OMB systems is mainly based on the technological advances on the component and system level, and for this purpose, a broad gamut of various structural elements, such as transceivers, amplifiers, filters, etc. have been commercialized already or are close to commercialization. This wide range of options, which aid in unlocking the concurrent transmission in all amplification bands, is reviewed here for the first time, whilst their pros and cons as well as their limitations are discussed. Furthermore, the needs for additional components in order to fully exploit the -390 nm low-loss wavelength range of SMF, which spans from 1260 to 1650 nm, are highlighted. Finally, based on a physical layer formalism, which incorporates the impact of the most important physical layer constraints for an OMB system, the attainable capacity and transparent reach of each amplification band are quantified. [ABSTRACT FROM AUTHOR]

A micro-displacement sensor consisting of a fiber-loop made with a tapered fiber is reported. The sensor operation is based on the interaction between the fundamental cladding mode propagating through the taper waist and higher order cladding modes excited when the taper is deformed to form a loop. As a result, a transmission spectrum with several notches is observed, where the notch wavelength resonances shift as a function of the loop diameter. The loop diameter is varied by the spatial displacement of one end of the fiber-loop attached to a linear translation stage. In a displacement range of 3.125 mm the maximum wavelength shift is 360.93 nm, with 0.116 nm/μm sensitivity. By using a 1,280 nm broadband low-power LED source and a single Ge-photodetector in a power transmission sensor setup, a sensitivity in the order of 2.7 nW/μm is obtained in ∼1 mm range. The proposed sensor is easy to implement and has a plenty of room to improve its performance. [ABSTRACT FROM AUTHOR]

Recently, metropolitan and access communication networks have markedly developed by utilizing a variety of technologies. Their bearer communication infrastructures will be mostly exploiting the optical transmission medium where wavelength division multiplexing techniques will play an important role. This contribution discusses the symmetric sharing of common optical network resources in wavelength and time domains. Wavelength-Division Multiplexed Passive Optical Networks (WDM-PON) attract considerable attention regarding the next generation of optical metropolitan and access networks. The main purpose of this contribution is presented by the analysis of possible scheduling of wavelengths for our novel hybrid network topologies considered for WDM-PON networks. This contribution briefly deploys adequate Dynamic Wavelength Allocation (DWA) algorithms for selected WDM-PON network designs with the provision of traffic protection when only passive optical components in remote nodes are utilized. The main part of this study is focused on the use of wavelength scheduling methods for selected WDM-PON network designs. For evaluation of offline and online wavelength scheduling for novel hybrid network topologies, a simulation model realized in the Matlab programming environment allows to analyze interactions between various metropolitan and access parts in the Optical Distribution Network (ODN) related to advanced WDM-PON network designs. Finally, wavelength scheduling methods are compared from a viewpoint of utilization in advanced WDM-PON networks designs. [ABSTRACT FROM AUTHOR]