Search

Moisture accumulates with the growing aging progress of oil-paper insulation and further shortens the remaining life of the transformer. The frequency-domain spectroscopy (FDS) technique can be used to realize the moisture estimation. However, the moisture estimation results would be unreliable once the aging effect on FDS was ignored. Given this issue, an alternative model including the aging effect is thus proposed using FDS and intelligent algorithm. In this work, the feature parameters of FDS data are used to build the databases for characterizing the aging degree and moisture. Then, the moisture estimation models are developed using the weighted K-nearest neighbor (K-NN) algorithm. The accuracy and applicability of the proposed models are finally discussed in laboratory and field conditions. In that respect, the findings reveal that the reported model is available for moisture estimation of transformer oil-paper insulation under various aging degrees and test temperatures. [ABSTRACT FROM AUTHOR]

Nowadays, reliability of power system is of great importance. Therefore, the condition of transformers as the expensive and critical components of a power system should be monitored and assessed. The dominant factor that causes limitation in transformers lifetime is the paper insulation. This paper aims to investigate the conspicuous influence of moisture content, especially in low oxygen and temperature on lifetime estimation under constant conditions, based on the results of previous experiments. Degree of polymerization (DP) is employed to quantify the effects of detrimental parameters with respect to their time-varying nature. This paper proposes a novel lifetime estimation-approach considering a yearly moisture growth for transformers. The results indicate different trend of DP profiles, which lead to an accurate lifetime estimation in comparison with DP obtained through ideal conditions. Furthermore, oscillations in the hot-spot temperature of transformers are demonstrated to have a negative effect on the lifetime. [ABSTRACT FROM AUTHOR]

Most researchers focus on designing accurate crowd counting models with heavy parameters and computations but ignore the resource burden during the model deployment. A real-world scenario demands an efficient counting model with low-latency and high-performance. Knowledge distillation provides an elegant way to transfer knowledge from a complicated teacher model to a compact student model while maintaining accuracy. However, the student model receives the wrong guidance with the supervision of the teacher model due to the inaccurate information understood by the teacher in some cases. In this paper, we propose a dual-knowledge distillation (DKD) framework, which aims to reduce the side effects of the teacher model and transfer hierarchical knowledge to obtain a more efficient counting model. First, the student model is initialized with global information transferred by the teacher model via adaptive perspectives. Then, the self-knowledge distillation forces the student model to learn the knowledge by itself, based on intermediate feature maps and target map. Specifically, the optimal transport distance is utilized to measure the difference of feature maps between the teacher and the student to perform the distribution alignment of the counting area. Extensive experiments are conducted on four challenging datasets, demonstrating the superiority of DKD. When there are only approximately 6% of the parameters and computations from the original models, the student model achieves a faster and more accurate counting performance as the teacher model even surpasses it. [ABSTRACT FROM AUTHOR]

This paper considers distributed estimation methods to enable the formation of Unmanned-Aerial-Vehicles (UAVs) that track a moving target. The UAVs (or agents) are equipped with communication devices to receive a beacon signal from the target and share information with neighboring UAVs. The shared information includes the time-of-arrival (TOA) of the beacon signal from the target and estimates on the target’s location. Every UAV processes the received information from the neighbors using a single-time-scale distributed estimation protocol. This differs from multi-time-scale protocols that require (i) many consensus iterations on a-priori estimates, (ii) fast communication among agents (in general, much faster than the sampling rate of the target dynamics), and thus, more-costly communication equipment and processing units. Further, our approach outperforms most single-time-scale methods in terms of observability assumption as these methods assume that the target is observable via the measurement data received from neighboring UAVs (referred to as local-observability). This requires more communications among the sensors. In contrast, our approach is only based on global-observability assumption, and thus, requires less networking (only strong-connectivity) and communication traffic along with less computational load by data-processing once at the same time-scale of sampling target dynamics. We consider modified time-difference-of-arrival (TDOA) measurements with a constant output matrix for the linearized model. UAVs make a pre-specified formation, and by estimating the target’s location via these measurements, move along with the target. Note to Practitioners—Inspired by recent development in industrial UAVs along with emerging progress in low-cost processing units, fog computing systems, and wireless communications, this paper considers mobile tracking of a moving target via a group of wireless-connected autonomous drones. In the classical tracking methods, which are prone to single-point-of-failure, all the sensors need to send their information to a ground central station over a long-range and costly data-transmission channel. In contrast, by collaborative tracking the processing and decision-making are distributed among a swarm of drones equipped with onboard miniaturized electronic parts such as sensors, microcontrollers, microprocessors, and communication units. This article provides an efficient algorithm to enable such drones to autonomously track the moving target in real-time. Note that the cost and tracking ability of the UAV swarm are directly determined by the computational efficiency and communication burden of the estimation algorithm. In this regard, most available estimation algorithms are over budget and even infeasible due to the need for fast data-transmission channels, fast CPUs, and high network traffic. Our proposed estimation technique outperforms similar algorithms in terms of required communication bandwidth, data-transmission rate, and computational resources, which considerably reduces the hardware cost and improves tracking efficiency in real-time large-scale applications. We show the feasibility and efficiency of our distributed tracking method by simulation. [ABSTRACT FROM AUTHOR]

In this paper, we analyze the generalization performance of the Iterative Hard Thresholding (IHT) algorithm widely used for sparse recovery problems. The parameter estimation and sparsity recovery consistency of IHT has long been known in compressed sensing. From the perspective of statistical learning, another fundamental question is how well the IHT estimation would predict on unseen data. This paper makes progress towards answering this open question by introducing a novel sparse generalization theory for IHT under the notion of algorithmic stability. Our theory reveals that: 1) under natural conditions on the empirical risk function over $n$ samples of dimension $p$ , IHT with sparsity level $k$ enjoys an $\tilde {\mathcal {O}}(n^{-1/2}\sqrt {k\log (n)\log (p)})$ rate of convergence in sparse excess risk; 2) a tighter $\tilde {\mathcal {O}}(n^{-1/2}\sqrt {\log (n)})$ bound can be established by imposing an additional iteration stability condition on a hypothetical IHT procedure invoked to the population risk; and 3) a fast rate of order $\tilde {\mathcal {O}}\left ({n^{-1}k(\log ^{3}(n)+\log (p))}\right)$ can be derived for strongly convex risk function under proper strong-signal conditions. The results have been substantialized to sparse linear regression and sparse logistic regression models to demonstrate the applicability of our theory. Preliminary numerical evidence is provided to support our theoretical predictions. [ABSTRACT FROM AUTHOR]

This paper presents the overview and rationale behind the Decoder-Side Depth Estimation (DSDE) mode of the MPEG Immersive Video (MIV) standard, using the Geometry Absent profile, for efficient compression of immersive multiview video. A MIV bitstream generated by an encoder operating in the DSDE mode does not include depth maps. It only contains the information required to reconstruct them in the client or in the cloud: decoded views and metadata. The paper explains the technical details and techniques supported by this novel MIV DSDE mode. The description additionally includes the specification on Geometry Assistance Supplemental Enhancement Information which helps to reduce the complexity of depth estimation, when performed in the cloud or at the decoder side. The depth estimation in MIV is a non-normative part of the decoding process, therefore, any method can be used to compute the depth maps. This paper lists a set of requirements for depth estimation, induced by the specific characteristics of the DSDE. The depth estimation reference software, continuously and collaboratively developed with MIV to meet these requirements, is presented in this paper. Several original experimental results are presented. The efficiency of the DSDE is compared to two MIV profiles. The combined non-transmission of depth maps and efficient coding of textures enabled by the DSDE leads to efficient compression and rendering quality improvement compared to the usual encoder-side depth estimation. Moreover, results of the first evaluation of state-of-the-art multiview depth estimators in the DSDE context, including machine learning techniques, are presented. [ABSTRACT FROM AUTHOR]

This paper concerns the problem of defending against spoofing attacks without a secret key. We address the problem using the Physical-Layer-Authentication (PLA) because of its high security, low overhead, and high compatibility. However, many PLA schemes have the following limitations: quantization errors, local optimums, and performance loss due to the change in the communication environment. In this paper, two phase-noise-based PLA schemes are proposed to address the limitations of the prior schemes. We denote the first scheme as the Multiple Phase Noises PLA (MPP) scheme, which realizes the PLA by using multiple phase noise innovations. Note that since the MPP scheme avoids using any quantization algorithm, it outperforms the prior schemes on the authentication performance. We denote the second scheme as the Enhanced Multiple Phase Noises PLA (EMPP) scheme, which introduces an artificial random phase to the transmitted symbols at the transmitter to further improve the authentication performance. The theoretical analyses of the proposed schemes over fading channels are provided, where the closed-form expressions are derived. Theoretical comparisons between the proposed schemes and prior schemes are provided. The theoretical analyses and simulation results demonstrated the superiority of the proposed schemes. In comparison with the prior schemes, the MPP scheme achieves 13% authentication-performance gain without demodulation-performance loss, while the EMPP scheme achieves 42% authentication-performance gain with merely 16% demodulation-performance loss. [ABSTRACT FROM AUTHOR]

In this paper, a data assimilation network is proposed to tackle the challenges of domain generalization for person re-identification (ReID). Most of the existing research efforts only focus on single-dataset issues, and the trained models are difficult to generalize to unseen scenarios. This paper presents a distinctive idea to improve the generality of the model by assimilating three types of images: style-variant images, misaligned images and unlabeled images. The latter two are often ignored in the previous domain generalization ReID studies. In this paper, a non-local convolutional block attention module is designed for assimilating the misaligned images, and an attention adversary network is introduced to correct it. A progressive augmented memory is designed for assimilating the unlabeled images by progressive learning. Moreover, we propose an attention adversary difference loss for attention correction, and a labeling-guide discriminative embedding loss for progressive learning. Rather than designing a specific feature extractor that is robust to style shift as in most previous domain generalization work, we propose a data assimilation meta-learning procedure to train the proposed network, so that it learns to assimilate style-variant images. It is worth mentioning that we add an unlabeled augmented dataset to the source domain to tackle the domain generalization ReID tasks. Extensive experiments demonstrate that our approach significantly outperforms the state-of-the-art domain generalization methods. [ABSTRACT FROM AUTHOR]

A good quality stability model is a key factor for accurate power system operations.Inaccurate parameters of the stability models affect the decision making which paves the way for serious consequences. Thus, it is necessary to calibrate the stability model parameters in a regular manner. There are several calibration methods in the literature which are based on simultaneous estimation of the parameters and states. However, not all of the model parameters are well estimable simultaneously. Simultaneous estimation of parameters with high collinearity may result in biased calibration results. In this paper, the trajectory sensitivity method is used to detect the sensitive parameters and construct the sensitivity matrix. Then, parameters with high linear dependency are identified using the sensitivity matrix. It is shown that, despite the high sensitivity of a parameter, its estimability degrades as the collinearity with other parameters increase. In this paper an identifiability analysis that detects the collinearity among the sensitive parameters is proposed. The proposed method is validated using WSCC 9-Bus System. [ABSTRACT FROM AUTHOR]

This paper concerns the detection and identification of errors in the parameters of three-phase transposed as well as untransposed transmission line (TL) models used by various network applications. Such detailed models are increasingly needed in particular by power system applications where loads may not be balanced and/or TLs may not be symmetrical, and a full detailed three-phase solution may have to be obtained. To address this problem, the paper proposes an efficient algorithm for detection, identification, and estimation of parameter errors using synchronized phasor measurements. The suspect TL is detected using the modal domain networks in the first stage. The developed algorithm extends the previously developed largest normalized Lagrange multiplier (NLM) test for positive sequence parameters to the full coupled three-phase lines. An estimation method is also proposed for estimating the erroneous parameters, which takes into account the correlation of the parameters. To illustrate the effectiveness of the method, several tests are performed on the IEEE 118-bus system and a large 3474-bus utility system. [ABSTRACT FROM AUTHOR]

There is an opportunity in modern power systems to explore the demand flexibility by incentivizing consumers with dynamic prices. In this paper, we quantify demand flexibility using an efficient tool called time-varying elasticity, whose value may change depending on the prices and decision dynamics. This tool is particularly useful for evaluating the demand response potential and system reliability. Recent empirical evidences have highlighted some abnormal features when studying demand flexibility, such as delayed responses and vanishing elasticities after price spikes. Existing methods fail to capture these complicated features because they heavily rely on some predefined (often over-simplified) regression expressions. Instead, this paper proposes a model-free methodology to automatically and accurately derive the optimal estimation pattern. We further develop a two-stage estimation process with Siamese long short-term memory (LSTM) networks. Here, a LSTM network encodes the price response, while the other network estimates the time-varying elasticities. In the case study, the proposed framework and models are validated to achieve higher overall estimation accuracy and better description for various abnormal features when compared with the state-of-the-art methods. [ABSTRACT FROM AUTHOR]

Estimating depth from RGB images is a long-standing ill-posed problem, which has been explored for decades by the computer vision, graphics, and machine learning communities. Among the existing techniques, stereo matching remains one of the most widely used in the literature due to its strong connection to the human binocular system. Traditionally, stereo-based depth estimation has been addressed through matching hand-crafted features across multiple images. Despite the extensive amount of research, these traditional techniques still suffer in the presence of highly textured areas, large uniform regions, and occlusions. Motivated by their growing success in solving various 2D and 3D vision problems, deep learning for stereo-based depth estimation has attracted a growing interest from the community, with more than 150 papers published in this area between 2014 and 2019. This new generation of methods has demonstrated a significant leap in performance, enabling applications such as autonomous driving and augmented reality. In this paper, we provide a comprehensive survey of this new and continuously growing field of research, summarize the most commonly used pipelines, and discuss their benefits and limitations. In retrospect of what has been achieved so far, we also conjecture what the future may hold for deep learning-based stereo for depth estimation research. [ABSTRACT FROM AUTHOR]

This paper focuses on optimal time-of-arrival (TOA) sensor placement for multiple target localization simultaneously. In previous work, different solutions only using non-shared sensors to localize multiple targets have been developed. Those methods localize different targets one-by-one or use a large number of mobile sensors with many limitations, such as low effectiveness and high network complexity. In this paper, firstly, a novel optimization model for multi-target localization incorporating shared sensors is formulated. Secondly, the systematic theoretical results of the optimal sensor placement are derived and concluded using the A-optimality criterion, i.e., minimizing the trace of the inverse Fisher information matrix (FIM), based on rigorous geometrical derivations. The reachable optimal trace of Cramér-Rao lower bound (CRLB) is also derived. It can provide optimal conditions for many cases and even closed form solutions for some special cases. Thirdly, a novel numerical optimization algorithm to quickly find and calculate the (sub-)optimal placement and achievable lower bound is explored, when the model becomes complicated with more practical constraints. Then, a hybrid method for solving the most general situation, integrating both the analytical and numerical solutions, is proposed. Finally, the correctness and effectiveness of the proposed theoretical and mathematical methods are demonstrated by several simulation examples. [ABSTRACT FROM AUTHOR]

This paper proposes a direct damping feedback control method against power system oscillations under small or large disturbances. For a targeted oscillation mode, this control method continuously minimizes the difference between the real-time estimated damping ratio and a desired value by changing power outputs of selected inverter-based resources. The method adopts a proportional-integral controller whose parameters are tuned using a nonlinear single-input-single-output model on damping estimation and control with a single-oscillator equivalent regarding the targeted power system mode. Also, optimization of these controller parameters considers both robustness and time performance in damping control. The paper also proposes utilizing a “zero-th order” parametric resonance phenomenon to simplify the controller design. Tests on a small power system and a 140-bus 48-machine Northeast Power Coordinating Council system validate the effectiveness of the proposed damping controller utilizing battery-based energy storage systems. [ABSTRACT FROM AUTHOR]

A large number of non-linear hardware and control units exists in power electronic system used in grid connected devices. The analytical transient stability analysis of grid-connected converters presents numerous difficulties. A common method to tackle this problem is the stability analysis using Lyapunov’s method. By applying this method, difficulties arise not only from finding a suitable Lyapunov function, but also from checking the constraint of Lyapunov stability. If the appropriate Lyapunov function is a high-order polynomial, it is very challenging to test if it meets the constraints of Lyapunov stability in certain regions. In this paper, the sum-of-squares programming method is used to obtain the estimation of a converter’s domain of attraction with a relatively small number of iterations compared to classically applied methods, such as the Monte Carlo method. The estimation of the domain of attraction are verified by time-domain simulations and StarSim’s controller hardware-in-the-loop tests in this paper. [ABSTRACT FROM AUTHOR]

The problem of range estimation based on noisy measurements with phase ambiguity can be solved using signals across multiple frequencies by existing algorithms based on either the Chinese Remainder Theorem or lattice theory. The performances of these algorithms are constrained by the trade-off between SNR of measurements and required estimation accuracy. In this paper, we firstly propose an algorithm to find a set of wavelengths satisfying the conditions to apply the closed-form lattice algorithm from a given interval. Then we propose an enhanced lattice algorithm for range estimation based on existing lattice approaches. In the conventional lattice algorithm, the selection of an integer vector by the estimator often fails to be the ground truth because of noise. As a result, the true value can be a neighbouring lattice point of the estimated point where neighbours are defined in terms of a distance depending on the noise characteristics. In this paper, all neighbouring lattice points of the estimated point obtained by a conventional lattice algorithm are regarded as candidates for the new estimate. Then an efficient estimator is presented to choose one of those candidates to be the new estimate. The performance of the proposed algorithm, i.e. the successful probability of reconstruction, is derived mathematically. Additionally, a computation-reduced algorithm is presented to reduce the overhead of computation. The calculated probability and simulation results demonstrate the efficiency of the proposed algorithm. [ABSTRACT FROM AUTHOR]

This paper presents a novel load shedding scheme with consideration of the active power ramping capability of Distributed Energy Resources (DERs) to address the challenges due to low inertia and diverse types of DERs in microgrids. In the paper, it is demonstrated that due to the small inertia in microgrids, even with sufficient reserve power, the frequency could rapidly drop to a low level and trigger the DERs’ under frequency protection (thus the total system collapse), if the reserve active power is not ramped up at a sufficient rate. The proposed load shedding scheme addresses this challenge by considering not only the DERs’ reserve, but also their speed in injecting active power to the system to determine the amount of load should be shed, so that critical frequency thresholds are not violated. The proposed load shedding scheme is tested using a realistic real time hardware-in-the-loop arrangement. The results show that the proposed scheme can correctly detect the cases when the DERs’ responses are too slow and trigger the required load shedding actions, thus effectively containing the frequency above the critical threshold. [ABSTRACT FROM AUTHOR]

Cell-free massive MIMO is one of the key technologies for future wireless communications, in which users are simultaneously and jointly served by all access points (APs). In this paper, we investigate the minimum mean square error (MMSE) estimation of effective channel coefficients in cell-free massive MIMO systems with massive connectivity. To facilitate the theoretical analysis, only single measurement vector (SMV) based MMSE estimation is considered in this paper, i.e., the MMSE estimation is performed based on the received pilot signals at each AP separately. Inspired by the decoupling principle of replica symmetric postulated MMSE estimation of sparse signal vectors with independent and identically distributed (i.i.d.) non-zero components, we develop the corresponding decoupling principle for the SMV based MMSE estimation of sparse signal vectors with independent and non-identically distributed (i.n.i.d.) non-zero components, which plays a key role in the theoretical analysis of SMV based MMSE estimation of the effective channel coefficients in cell-free massive MIMO systems with massive connectivity. Subsequently, based on the obtained decoupling principle of MMSE estimation, likelihood ratio test and the optimal fusion rule, we perform user activity detection based on the received pilot signals at only one AP, or cooperation among the entire set of APs for centralized or distributed detection. Via theoretical analysis, we show that the error probabilities of both centralized and distributed detection tend to zero when the number of APs tends to infinity while the asymptotic ratio between the number of users and pilots is kept constant. We also investigate the asymptotic behavior of oracle estimation in cell-free massive MIMO systems with massive connectivity via random matrix theory. Moreover, in order to demonstrate the potential performance loss of SMV based MMSE estimation, which does not employ the correlation between the received pilot signals at different APs, the multiple measurement vector (MMV) based MMSE estimation, i.e., joint MMSE estimation with pilot signals from all APs, is analyzed via numerical results. Numerical analysis shows that the theoretical analyze with our decoupling principle for the SMV based MMSE estimation of sparse signal vectors with i.n.i.d. non-zero components matches well with the numerical results. [ABSTRACT FROM AUTHOR]

Distributed or decentralized estimation of covariance, and distributed principal component analysis have been introduced and studied in the signal processing community in recent years, and applications in array processing have been indicated in some detail. Inspired by these, this paper provides a detailed development of several distributed algorithms for array processing. New distributed algorithms are proposed for DOA estimation methods like root-MUSIC, total least squares-ESPRIT, and FOCUSS. Other contributions include distributed design of the Capon beamformer from data, and distributed implementation of the spatial smoothing method for coherent sources. A distributed implementation of a recently proposed beamspace method called the convolutional beamspace (CBS) is also proposed. The proposed algorithms are fully distributed – an average consensus (AC) is used to avoid the need for a fusion center. The algorithms are based on a recently reported finite-time version of AC which converges to the exact solution in a finite number of iterations. Numerical examples are given throughout the paper to show the effectiveness of the proposed algorithms. [ABSTRACT FROM AUTHOR]

Multiple signal classification (MUSIC) has been widely applied in multiple-input multiple-output (MIMO) receivers for direction-of-arrival (DOA) estimation. To reduce the cost of radio frequency (RF) chains at millimeter-wave bands, hybrid analog-digital structure has been adopted in massive MIMO transceivers. In this situation, received signals at the antennas are unavailable to the digital receiver, and as a consequence, the spatial covariance matrix (SCM), which is essential in MUSIC algorithm, cannot be obtained using traditional sample average approach. Based on our previous work, we propose a novel algorithm for SCM reconstruction in hybrid massive MIMO systems with multiple RF chains in this paper. By switching the analog beamformers to a group of predetermined DOAs, SCM can be reconstructed through the solutions of a set of linear equations. Furthermore, a low-complexity algorithm, as well as a careful selection of the predetermined DOAs, will be also presented in this paper. Simulation results show that the proposed algorithms can reconstruct the SCM accurately so that MUSIC algorithm can be well used in hybrid massive MIMO systems with multiple RF chains. [ABSTRACT FROM AUTHOR]

Image classification needs to consider the existence of image degradations in practice. Although degraded images have various levels of degradation, the degradation levels are usually unknown. This paper proposes a convolutional neural network to classify degraded images by using a restoration network and an ensemble learning. The proposed network can automatically infer ensemble weights by using estimated degradation levels of degraded images and features of restored images, where the degradation levels are estimated internally. The proposed network is mainly discussed with JPEG distortion, while degradations of both Gaussian noise and blurring are also examined. We demonstrate that the proposed network can classify degraded images over various levels of degradation. This paper also reveals how the image-quality of training data for a classification network affects the classification performance of degraded images. [ABSTRACT FROM AUTHOR]

Synchrophasor estimators are nowadays evaluated with the Total Vector Error (TVE) using the synchrophasor representations of the few benchmark signals. This synchrophasor dependence prevents its application to power signals of real events. A new method to obtain the synchrophasor of real signals is proposed in this paper. A finite impulse response (FIR) filter, designed with the nonic O-spline is proposed to obtain phasor estimates asymptotically close to those of an ideal bandpass filter. The phasor estimation accuracy of one or several Phasor Measurement Units (PMUs) can be then assessed using the standard. In addition, it is possible to design two FIR differentiators to obtain frequency and ROCOF estimates close enough to those of ideal differentiator filters, and largely compliant with the standard. This new set of filters opens the way to apply the synchrophasor standard to assess estimates of PMUs of different brands when they process the same signals of a power system event. In this paper, the erratic phasor and frequency estimates produced by a SEL-351 A PMU from a real distributed generation system are assessed to corroborate that the synchrophasor standard can be opened to this new application based on real signals from the field, previously considered as impossible. [ABSTRACT FROM AUTHOR]

With low voltage (LV) distribution networks increasingly being re-purposed beyond their original design specifications to accommodate low carbon technologies, the ability to accurately calculate their actual spare capacity is critical. Traditionally, within the Great Britain (GB) power system, there has been limited monitoring of LV distribution networks, making this difficult. This paper proposes a method for estimating spare capacity of unmonitored LV networks using demand data from customer Smart Meters. In particular, the proposed method infers existing LV network capacity, as well as losses, across scenarios where only a limited number of customers have Smart Meters installed. Typical daily load profiles across customers with Smart Meters are learned using a Dirichlet sampled Gaussian mixture model (GMM). Learned profiles are then applied to all unmetered customers to estimate network parameters. Method accuracy is assessed by comparing estimations with simulated, fully observed, LV network models. The method is also compared to benchmark models for establishing unobserved demand profiles. Overall, results in the paper show that the proposed method outperforms benchmark models in terms of accurately assessing substation headroom, particularly in scenarios where only 10–50% of customers have Smart Meters installed. [ABSTRACT FROM AUTHOR]

Many autonomous vehicles and advanced driver-assistance systems are equipped with front-facing cameras that detect and track objects using deep-learning-based algorithms. However, the localization capability of monocular cameras is often overlooked. In this paper, a novel method for estimating the pixel-wise error in a detected object's location versus its ground truth is proposed. As the object moves away from the camera, the pixel errors are shown to be normally distributed with unique spreads along the image's vertical axis (y-pixel). The pixel error appears to be smaller as objects get farther away, while at the same distance range, objects have similar error distribution across the camera's horizontal view. The horizontal axis (x-pixel) error appears to be smaller while the distance moves further away. However, the x-pixel location along a constant y-pixel row has no impact on the error distribution. The estimated x and y-pixel error distributions can in turn be used to form a spatial error distribution for finding the location of a detected object within a certain confidence interval. The spatial errors are then projected onto the world coordinate system using a camera transformation matrix to give a more realistic sense of what this error means. The results show that location estimation using monocular cameras generates an elliptical error distribution around the object with a larger error in the y-pixel direction compared to the x-pixel direction. This error distribution can be important to fuse information from multiple range-detecting sensors as well as multi-vehicle and multi-object tracking. The uncertainty characterization for position measurement, as demonstrated in this paper is an essential element of tracking and, is sensor and algorithm dependent. [ABSTRACT FROM AUTHOR]

This paper studies large scatter matrix estimation for heavy tailed distributions. The contributions of this paper are twofold. First, we propose and advocate to use a new distribution family, the pair-elliptical, for modeling the high dimensional data. The pair-elliptical is more flexible and easier to check the goodness of fit compared to the elliptical. Secondly, built on the pair-elliptical family, we advocate using quantile-based statistics for estimating the scatter matrix. For this, we provide a family of quantile-based statistics. They outperform the existing ones for better balancing the efficiency and robustness. In particular, we show that the propose estimators have comparable performance to the moment-based counterparts under the Gaussian assumption. The method is also tuning-free compared to Catoni’s M-estimator for covariance matrix estimation. We further apply the method to conduct a variety of statistical methods. The corresponding theoretical properties as well as numerical performances are provided. [ABSTRACT FROM AUTHOR]

Scene flow represents the 3D motion of every point in the dynamic environments. Like the optical flow that represents the motion of pixels in 2D images, 3D motion representation of scene flow benefits many applications, such as autonomous driving and service robot. This paper studies the problem of scene flow estimation from two consecutive 3D point clouds. In this paper, a novel hierarchical neural network with double attention is proposed for learning the correlation of point features in adjacent frames and refining scene flow from coarse to fine layer by layer. The proposed network has a new more-for-less hierarchical architecture. The more-for-less means that the number of input points is greater than the number of output points for scene flow estimation, which brings more input information and balances the precision and resource consumption. In this hierarchical architecture, scene flow of different levels is generated and supervised respectively. A novel attentive embedding module is introduced to aggregate the features of adjacent points using a double attention method in a patch-to-patch manner. The proper layers for flow embedding and flow supervision are carefully considered in our network designment. Experiments show that the proposed network outperforms the state-of-the-art performance of 3D scene flow estimation on the FlyingThings3D and KITTI Scene Flow 2015 datasets. We also apply the proposed network to the realistic LiDAR odometry task, which is a key problem in autonomous driving. The experiment results demonstrate that our proposed network can outperform the ICP-based method and shows good practical application ability. The source codes will be released on https://github.com/IRMVLab/HALFlow. [ABSTRACT FROM AUTHOR]

Interactive image restoration aims to generate restored images by adjusting a controlling coefficient which determines the restoration level. Previous works are restricted in modulating image with a single coefficient. However, real images always contain multiple types of degradation, which cannot be well determined by one coefficient. To make a step forward, this paper presents a new problem setup, called multi-dimension (MD) modulation, which aims at modulating output effects across multiple degradation types and levels. Compared with the previous single-dimension (SD) modulation, the MD setup to handle multiple degradations adaptively and relief data unbalancing problem in different degradation types. We also propose a deep architecture - CResMD with newly introduced controllable residual connections for multi-dimension modulation. Specifically, we add a controlling variable on the conventional residual connection to allow a weighted summation of input and residual. The values of these weights are generated by another condition network. We further propose a new data sampling strategy based on beta distribution together with a simple loss reweighting approach to balance different degradation types and levels. With corrupted image and degradation information as inputs, the network can output the corresponding restored image. By tweaking the condition vector, users can control the output effects in MD space at test time. Moreover, we also provide an estimation network to predict the condition vector, thus the base network could directly output the restored image without modulation from users. Extensive experiments demonstrate that the proposed CResMD achieves excellent performance on both SD and MD modulation tasks. [ABSTRACT FROM AUTHOR]

Adversarial attacks have been extensively studied in recent years since they can identify the vulnerability of deep learning models before deployed. In this paper, we consider the black-box adversarial setting, where the adversary needs to craft adversarial examples without access to the gradients of a target model. Previous methods attempted to approximate the true gradient either by using the transfer gradient of a surrogate white-box model or based on the feedback of model queries. However, the existing methods inevitably suffer from low attack success rates or poor query efficiency since it is difficult to estimate the gradient in a high-dimensional input space with limited information. To address these problems and improve black-box attacks, we propose two prior-guided random gradient-free (PRGF) algorithms based on biased sampling and gradient averaging, respectively. Our methods can take the advantage of a transfer-based prior given by the gradient of a surrogate model and the query information simultaneously. Through theoretical analyses, the transfer-based prior is appropriately integrated with model queries by an optimal coefficient in each method. Extensive experiments demonstrate that, in comparison with the alternative state-of-the-arts, both of our methods require much fewer queries to attack black-box models with higher success rates. [ABSTRACT FROM AUTHOR]

Interactive image restoration aims to generate restored images by adjusting a controlling coefficient which determines the restoration level. Previous works are restricted in modulating image with a single coefficient. However, real images always contain multiple types of degradation, which cannot be well determined by one coefficient. To make a step forward, this paper presents a new problem setup, called multi-dimension (MD) modulation, which aims at modulating output effects across multiple degradation types and levels. Compared with the previous single-dimension (SD) modulation, the MD setup to handle multiple degradations adaptively and relief data unbalancing problem in different degradation types. We also propose a deep architecture - CResMD with newly introduced controllable residual connections for multi-dimension modulation. Specifically, we add a controlling variable on the conventional residual connection to allow a weighted summation of input and residual. The values of these weights are generated by another condition network. We further propose a new data sampling strategy based on beta distribution together with a simple loss reweighting approach to balance different degradation types and levels. With corrupted image and degradation information as inputs, the network can output the corresponding restored image. By tweaking the condition vector, users can control the output effects in MD space at test time. Moreover, we also provide an estimation network to predict the condition vector, thus the base network could directly output the restored image without modulation from users. Extensive experiments demonstrate that the proposed CResMD achieves excellent performance on both SD and MD modulation tasks. [ABSTRACT FROM AUTHOR]

Adversarial attacks have been extensively studied in recent years since they can identify the vulnerability of deep learning models before deployed. In this paper, we consider the black-box adversarial setting, where the adversary needs to craft adversarial examples without access to the gradients of a target model. Previous methods attempted to approximate the true gradient either by using the transfer gradient of a surrogate white-box model or based on the feedback of model queries. However, the existing methods inevitably suffer from low attack success rates or poor query efficiency since it is difficult to estimate the gradient in a high-dimensional input space with limited information. To address these problems and improve black-box attacks, we propose two prior-guided random gradient-free (PRGF) algorithms based on biased sampling and gradient averaging, respectively. Our methods can take the advantage of a transfer-based prior given by the gradient of a surrogate model and the query information simultaneously. Through theoretical analyses, the transfer-based prior is appropriately integrated with model queries by an optimal coefficient in each method. Extensive experiments demonstrate that, in comparison with the alternative state-of-the-arts, both of our methods require much fewer queries to attack black-box models with higher success rates. [ABSTRACT FROM AUTHOR]

Fluorescence lifetime imaging is a valuable technique for probing characteristics of wide ranging samples and sensing of the molecular environment. However, the desire to measure faster and reduce effects such as photo bleaching in optical photon-count measurements for lifetime estimation lead to inevitable effects of convolution with the instrument response functions and noise, causing a degradation of the lifetime accuracy and precision. To tackle the problem, this paper presents a robust and computationally efficient framework for recovering fluorophore sample decay from the histogram of photon-count arrivals modelled as a decaying single-exponential function. In the proposed approach, the temporal histogram data is first decomposed into multiple bins via an adaptive multi-bin signal representation. Then, at each level of the multi-resolution temporal space, decay information including both the amplitude and the lifetime of a single-exponential function is rapidly decoded based on a novel statistical estimator. Ultimately, a game-theoretic model consisting of two players in an “amplitude-lifetime” game is constructed to be able to robustly recover optimal fluorescence decay signal from a set of fused multi-bin estimates. In addition to theoretical demonstrations, the efficiency of the proposed framework is experimentally shown on both synthesised and real data in different imaging circumstances. On a challenging low photon-count regime, our approach achieves about 28% improvement in bias than the best competing method. On real images, the proposed method processes data on average around 63 times faster than the gold standard least squares fit. Implementation codes are available to researchers. [ABSTRACT FROM AUTHOR]

Multilevel converters (MLCs) are pioneers in the field of electrical energy conversion. From the classification of MLCs, modular multilevel converter (MMC) is top-rated due to its attractive structure and performance. The modular nature and no need for isolated DC resources are two significant advantages of this converter. However, the need for many sensors to control its performance is a considerable drawback. In addition, the internal circulating current in the MMC causes losses, decreases efficiency, and increases the voltage ripple of capacitors. This paper proposes combining a new capacitor voltage sorting method and an open-loop controller based on arms energy estimation to control the MMC using two voltage sensors in the arms and one current sensor at the output. The proposed method ensures continuous voltage balancing of the capacitors and removes multiple voltage sensors from sub-modules (SMs). The simulation and experimental results verify the accuracy and effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

The use of synchronized measurement technology leads to a more reliable and secure operation of the power system. Phasor calculation is needed for all buses where a phasor measurement unit is installed, and fast and precise estimation is necessary for accurate monitoring, protection and control. The Prony algorithm is one promising method due to its capability to estimate phasor adaptively with changing frequency. The algorithm projects the signal on $L$ exponentially damped sine functions, where $L$ is the order of the Prony. However, the order under different conditions should be adapted automatically to reduce computation time. To adaptively specify the order, the empirical mode decomposition (EMD) method is proposed in this paper to be combined with the Prony and named EMD-Prony. The EMD decomposes a signal into finite single oscillatory modes, representing the number of modes in the signal. EMD is also used as a pre-processing step to filter noise from an input signal of Prony. Therefore, EMD is proposed here as an assistant of Prony in a phasor estimation. Finally, the proposed method is tested on the benchmark signals proposed in the IEEE standard, signals obtained from a simulated power system, and measured data from a real-world power system. [ABSTRACT FROM AUTHOR]

In this paper, we study the estimation of a rank-one spiked tensor in the presence of heavy tailed noise. Our results highlight some of the fundamental similarities and differences in the tradeoff between statistical and computational efficiencies under heavy tailed and Gaussian noise. In particular, we show that, for $p$ th order tensors, the tradeoff manifests in an identical fashion as the Gaussian case when the noise has finite $4(p-1)$ th moment. The difference in signal strength requirements, with or without computational constraints, for us to estimate the singular vectors at the optimal rate, interestingly, narrows for noise with heavier tails and vanishes when the noise only has finite fourth moment. Moreover, if the noise has less than fourth moment, tensor SVD, perhaps the most natural approach, is suboptimal even though it is computationally intractable. Our analysis exploits a close connection between estimating the rank-one spikes and the spectral norm of a random tensor with iid entries. In particular, we show that the order of the spectral norm of a random tensor can be precisely characterized by the moment of its entries, generalizing classical results for random matrices. In addition to the theoretical guarantees, we propose estimation procedures for the heavy tailed regime, which are easy to implement and efficient to run. Numerical experiments are presented to demonstrate their practical merits. [ABSTRACT FROM AUTHOR]

Let $\mathrm {W}\in \mathbb {C}^{n\times n}$ be a single-spiked Wishart matrix in the class $\mathrm {W}\sim \mathcal {CW}_{n}(m,\mathrm {I}_{n}+ \theta \mathrm {v}\mathrm {v}^{\dagger}) $ with $m\geq n$ , where ${\mathrm {I}}_{n}$ is the $n\times n$ identity matrix, $\mathrm {v}\in \mathbb {C}^{n\times 1}$ is an arbitrary vector with unit Euclidean norm, $\theta \geq 0$ is a non-random parameter, and $(\cdot)^{\dagger} $ represents the conjugate-transpose operator. Let u1 and ${\mathrm {u}}_{n}$ denote the eigenvectors corresponding to the smallest and the largest eigenvalues of W, respectively. This paper investigates the probability density function (p.d.f.) of the random quantity $Z_{\ell }^{(n)}=\left |{\mathrm {v}^{\dagger} \mathrm {u}_\ell }\right |^{2}\in (0,1)$ for $\ell =1,n$. In particular, we derive a finite dimensional closed-form p.d.f. for $Z_{1}^{(n)}$ which is amenable to asymptotic analysis as $m,n$ diverges with $m-n$ fixed. It turns out that, in this asymptotic regime, the scaled random variable $nZ_{1}^{(n)}$ converges in distribution to $\chi ^{2}_{2}/2(1+\theta)$ , where $\chi _{2}^{2}$ denotes a chi-squared random variable with two degrees of freedom. This reveals that u1 can be used to infer information about the spike. On the other hand, the finite dimensional p.d.f. of $Z_{n}^{(n)}$ is expressed as a double integral in which the integrand contains a determinant of a square matrix of dimension $(n-2)$. Although a simple solution to this double integral seems intractable, for special configurations of $n=2,3$ , and 4, we obtain closed-form expressions. [ABSTRACT FROM AUTHOR]

As one of the fundamental technologies for scene understanding, semantic segmentation has been widely explored in the last few years. Light field cameras encode the geometric information by simultaneously recording the spatial information and angular information of light rays, which provides us with a new way to solve this issue. In this paper, we propose a high-quality and challenging urban scene dataset, containing 1074 samples composed of real-world and synthetic light field images as well as pixel-wise annotations for 14 semantic classes. To the best of our knowledge, it is the largest and the most diverse light field dataset for semantic segmentation. We further design two new semantic segmentation baselines tailored for light field and compare them with state-of-the-art RGB, video and RGB-D-based methods using the proposed dataset. The outperforming results of our baselines demonstrate the advantages of the geometric information in light field for this task. We also provide evaluations of super-resolution and depth estimation methods, showing that the proposed dataset presents new challenges and supports detailed comparisons among different methods. We expect this work inspires new research direction and stimulates scientific progress in related fields. The complete dataset is available at https://github.com/HAWKEYE-Group/UrbanLF. [ABSTRACT FROM AUTHOR]

Translation averaging is known to be more difficult than rotation averaging due to scale ambiguity, estimation sensitivity, and solution uncertainty. Existing approaches have exposed their limitations in terms of accuracy, robustness, simplicity, or efficiency. To tackle this tough problem, a simple yet effective translation averaging pipeline, termed as Incremental Translation Averaging (ITA), is proposed in this paper. It combines the advantages of high accuracy and robustness in incremental parameter estimation pipeline and the advantages of high simplicity and efficiency in global motion averaging approach. Unlike the traditional translation averaging methods which estimate all the absolute camera locations simultaneously and suffer from inaccuracy in parameter estimation and incompleteness in scene reconstruction, our ITA computes them novelly in an incremental way with higher accuracy and robustness. Thanks to the introduction of incremental parameter estimation thought into the translation averaging pipeline, 1) our ITA is robust to measurement outliers and accurate in parameter estimation; and 2) our ITA is simple and efficient because of its less dependency on complicated optimization, carefully-designed preprocessing, or additional information. Comprehensive evaluations on the 1DSfM dataset demonstrate the effectiveness of our ITA and its advantages over several state-of-the-art translation averaging approaches. [ABSTRACT FROM AUTHOR]

Deep learning has greatly promoted the development of multi-view stereo in recent years. However, how to measure the reliability of the estimated depth map for practical applications and make reasonable depth hypothesis sampling for the cost volume building in the coarse-to-fine architecture are still unresolved crucial problems. To this end, an Uncertainty Guided multi-view Network (UGNet) is proposed in this paper. In order to enable the network to perceive the uncertainty, an uncertainty-aware loss function is introduced, which not only can infer uncertainty implicitly in an unsupervised manner but also can reduce the bad impact of high uncertainty regions and the erroneous labels in the training set during training. Moreover, an uncertainty-based depth hypothesis sampling strategy is further proposed to adaptively determine the depth search range of each pixel for finer stages, which helps to generate more rational depth intervals compared with other methods and build more compact cost volumes without redundancy. Experimental results on DTU dataset, BlendedMVS dataset, Tanks and Temples dataset and ETH3D high-res benchmark show that our method achieves promising reconstruction results compared with other state-of-the-art methods. [ABSTRACT FROM AUTHOR]

The highly fluctuated renewable generations and electric vehicles have undergone tremendous growth in recent years. Most of them are connected to the grid via power electronic devices, resulting in wide variation ranges for several key parameters in the frequency response model (FRM), such as system inertia and load damping factors. This paper proposes an automatic generation control (AGC) method considering the uncertainties of these key parameters. First, the historical power system operation data following large power disturbances are used to identify the FRM key parameters offline. Second, the offline identification results and the normal operation data right before the large power disturbance are used to train the online probability estimation model of the FRM key parameters. Third, the online estimation results of the FRM key parameters are used as the input, and the model predictive-based AGC optimization method is developed based on distributionally robust optimization (DRO) theory. Case studies conducted on the IEEE 118-bus system show that the proposed AGC method outperforms the widely utilized PI-based and PID-based control methods in terms of performance and efficiency. [ABSTRACT FROM AUTHOR]

The wide variety of inverter control settings for solar photovoltaics (PV) causes the accurate knowledge of these settings to be difficult to obtain in practice. This paper addresses the problem of determining inverter reactive power control settings from net load advanced metering infrastructure (AMI) data. The estimation is first cast as fitting parameterized control curves. We argue for an intuitive and practical approach to preprocess the AMI data, which exposes the setting to be extracted. We then develop a more general approach with a data-driven reactive power disaggregation algorithm, reframing the problem as a maximum likelihood estimation for the native load reactive power. These methods form the first approach for reconstructing reactive power control settings of solar PV inverters from net load data. The constrained curve fitting algorithm is tested on 701 loads with behind-the-meter (BTM) PV systems with identical control settings. The settings are accurately reconstructed with mean absolute percentage errors between 0.425% and 2.870%. The disaggregation-based approach is then tested on 451 loads with variable BTM PV control settings. Different configurations of this algorithm reconstruct the PV inverter reactive power timeseries with root mean squared errors between 0.173 and 0.198 kVAR. [ABSTRACT FROM AUTHOR]

Motion blur in dynamic scenes is an important yet challenging research topic. Recently, deep learning methods have achieved impressive performance for dynamic scene deblurring. However, the motion information contained in a blurry image has yet to be fully explored and accurately formulated because: (i) the ground truth of dynamic motion is difficult to obtain; (ii) the temporal ordering is destroyed during the exposure; and (iii) the motion estimation from a blurry image is highly ill-posed. By revisiting the principle of camera exposure, motion blur can be described by the relative motions of sharp content with respect to each exposed position. In this paper, we define exposure trajectories, which represent the motion information contained in a blurry image and explain the causes of motion blur. A novel motion offset estimation framework is proposed to model pixel-wise displacements of the latent sharp image at multiple timepoints. Under mild constraints, our method can recover dense, (non-)linear exposure trajectories, which significantly reduce temporal disorder and ill-posed problems. Finally, experiments demonstrate that the recovered exposure trajectories not only capture accurate and interpretable motion information from a blurry image, but also benefit motion-aware image deblurring and warping-based video extraction tasks. Codes are available on https://github.com/yjzhang96/Motion-ETR. [ABSTRACT FROM AUTHOR]

This paper presents a photometric stereo method that works with unknown natural illumination without any calibration objects or initial guess of the target shape. To solve this challenging problem, we propose the use of an equivalent directional lighting model for small surface patches consisting of slowly varying normals, and solve each patch up to an arbitrary orthogonal ambiguity. We further build the patch connections by extracting consistent surface normal pairs via spatial overlaps among patches and intensity profiles. Guided by these connections, the local ambiguities are unified to a global orthogonal one through Markov Random Field optimization and rotation averaging. After applying the integrability constraint, our solution contains only a binary ambiguity, which could be easily removed. Experiments using both synthetic and real-world datasets show our method provides even comparable results to calibrated methods. [ABSTRACT FROM AUTHOR]