Search

This paper develops a comprehensive dynamic-phasor-based small-signal model for the modular multilevel converter (MMC) system under unbalanced grid conditions, which takes into consideration the dynamics of the MMC system under a balanced grid condition as well as the other emerging internal harmonics produced by the unbalanced grid components and more complex controllers. The small-signal model is validated by comparing the time-domain responses from a detailed electromagnetic transient (EMT) simulation in PSCAD/EMTDC. Based on the eigen-analysis and PSCAD-based time-domain simulation studies, this paper reveals the poorly damped modes that cause unstable oscillations in MMC system under the unbalanced grid conditions. From the results, more poorly damped modes involved in the internal harmonics are emerging under unbalanced grid conditions compared with the modes under the balanced grid conditions, and can highly impact the system dynamic behaviors by the selection of the control parameters. It is also shown that, under the unbalanced grid conditions, the feasible region of the control parameters of the vector current control gets narrowed indicating the reduction of the stability margin, smaller (larger) value of proportional (integral) gain of the circulating current suppressing controller can enhance the system stability, and larger values of the proportional and integral gains of the negative-sequence current suppressing control can result in the harmonic instability of the MMC system. Besides, the parameters of multiple complex-coefficient filters for positive- and negative-sequence components extraction also have a big impact on the small-signal stability of the MMC system and are required to be properly selected. [ABSTRACT FROM AUTHOR]

Interarea power oscillation damping enhancement in large interconnected power systems is often accomplished using supplementary controls at the synchronous machines involved and with the use of flexible ac transmission system devices. The power system literature has demonstrated that wide area signals could be more effective than the local signals for these controllers. In some cases where phasor measurement units are used, all the required control signals may not be available. To alleviate these cases, control signals are obtained using estimated signals from a “dynamic state estimator,” and a robust supplementary controller is deployed. In this paper, the cited strategy is illustrated using a static var compensator. The feasibility of the proposed method has been demonstrated on the IEEE 50-generator test system. [ABSTRACT FROM AUTHOR]