Search

It is well known that for Gaussian channels, a nearest neighbor decoding rule, which seeks the minimum Euclidean distance between a codeword and the received channel output vector, is the maximum likelihood solution and hence capacity-achieving. Nearest neighbor decoding remains a convenient and yet mismatched solution for general channels, and the key message of this paper is that the performance of nearest neighbor decoding can be improved by generalizing its decoding metric to incorporate channel state dependent output processing and codeword scaling. Using generalized mutual information, which is a lower bound to the mismatched capacity under independent and identically distributed codebook ensemble, as the performance measure, this paper establishes the optimal generalized nearest neighbor decoding rule, under Gaussian channel input. Several restricted forms of the generalized nearest neighbor decoding rule are also derived and compared with existing solutions. The results are illustrated through several case studies for fading channels with imperfect receiver channel state information and for channels with quantization effects. [ABSTRACT FROM AUTHOR]

Millimeter-wave rotary-wing (RW) unmanned aerial vehicle (UAV) air-to-ground (A2G) links face unpredictable Doppler effect arising from the inevitable wobbling of RW UAV. Moreover, the time-varying channel characteristics during transmission lead to inaccurate channel estimation, which in turn results in the deteriorated bit error probability performance of the UAV A2G link. This paper studies the impact of mechanical wobbling on the Doppler effect of the millimeter-wave wireless channel between a hovering RW UAV and a ground node. Our contributions of this paper lie in: i) modeling the wobbling process of a hovering RW UAV; ii) developing an analytical model to derive the temporal autocorrelation function (ACF) for the millimeter-wave RW UAV A2G link in a closed-form expression; and iii) investigating how RW UAV wobbling impacts the Doppler effect on the millimeter-wave RW UAV A2G link. Numerical results show that different RW UAV wobbling patterns impact the amplitude and the frequency of ACF oscillation in the millimeter-wave RW UAV A2G link. For UAV wobbling, the temporal ACF decreases quickly and the impact of the Doppler effect is significant on the millimeter-wave A2G link. [ABSTRACT FROM AUTHOR]

The use of antenna arrays is indispensable in radar and multiple-input multiple-output (MIMO) wireless communications areas, as it permits the treatment of wavefronts in the spatial domain, enabling important applications such as beamforming and target detection. Spatial information is commonly given in terms of spatial correlation functions (SCFs), but its representation in terms of angular domain, such as the power azimuth spectrums (PASs), is sometimes more convenient. Therefore, transforming from SCF to PAS, and vice versa, is often required. This is commonly done by employing so-called beamformers, where the Bartlett beamformer (BB) is the most commonly utilized. However, the use of beamformers alone is not enough for retrieving PAS information from a given SCF. Particularly, this paper shows that a non-linear operation is missing in relating SCFs to PASs as provided by current beamformers. The paper also shows the mathematical expressions that correctly relate SCFs to PASs and wavenumber spectrums (WNSs) for the general case of systems with antenna arrays. The developed theory results in two new beamformers, which, corroborated by simulation results, solve any previous inconsistency in estimating PASs from SCFs. [ABSTRACT FROM AUTHOR]

This paper considers the uplink performance of a multi-user massive multiple-input multiple-output orthogonal frequency-division multiplexing (MIMO-OFDM) system with mobile users. Mobility brings two major problems to a MIMO-OFDM system: inter carrier interference (ICI) and channel aging. In practice, it is common to allot multiple contiguous subcarriers to a user as well as schedule multiple users on each subcarrier. Motivated by this, we consider a general subcarrier allocation scheme and derive expressions for the ICI power, uplink signal to interference plus noise ratio and the achievable uplink sum-rate, taking into account the ICI and the multi-user interference due to channel aging. We show that the system incurs a near-constant ICI power that depends linearly on the ratio of the number of users per subcarrier to the number of subcarriers per user, nearly independently of how the UEs distribute their power across the subcarriers. Further, we exploit the coherence bandwidth of the channel to reduce the length of the pilot sequences required for uplink channel estimation. We consider both zero-forcing and maximal-ratio combining at the receiver and compare the respective sum-rate performances. In either case, the subcarrier allocation scheme considered in this paper leads to significantly higher sum-rates compared to previous work, owing to the near-constant ICI property as well as the reduced pilot overhead. [ABSTRACT FROM AUTHOR]

Spatial modulation (SM) is one special type of multiple-input multiple-output (MIMO) technique whose advantage is that only one radio-frequency (RF) chain is needed. Recently, the so-called cross Z-complementary pair (CZCP) was proposed as the SM training sequence. Optimal channel estimation performance over frequency-selective channels can be achieved since the CZCPs have the specific zero correlation zone (ZCZ) for auto-correlation and cross-correlation sums. However, the ZCZ width of the CZCP is theoretically upper bounded by half sequence length. In this paper, the CZCP is extended to the cross Z-complementary set (CZCS) to have larger ZCZ width which can be used in SM to combat larger delay spread. Several generic constructions of CZCSs with large ZCZ widths and flexible lengths are proposed in this paper. Even the perfect CZCS, whose ZCZ width has the maximum value, can be obtained. Numerical simulations demonstrate that the proposed CZCS-based training sequence can tolerate large delay spreads to improve the channel estimation performance in SM. [ABSTRACT FROM AUTHOR]

Reconfigurable intelligent surfaces (RISs) have been recently considered as a promising candidate for energy-efficient solutions in future wireless networks. Their dynamic and low-power configuration enables coverage extension, massive connectivity, and low-latency communications. Due to a large number of unknown variables referring to the RIS unit elements and the transmitted signals, channel estimation and signal recovery in RIS-based systems are the ones of the most critical technical challenges. To address this problem, we focus on the RIS-assisted wireless communication system and present two joint channel estimation and signal recovery schemes based on message passing algorithms in this paper. Specifically, the proposed bidirectional scheme applies the Taylor series expansion and Gaussian approximation to simplify the sum-product procedure in the formulated problem. In addition, the inner iteration that adopts two variants of approximate message passing algorithms is incorporated to ensure robustness and convergence. Two ambiguities removal methods are also discussed in this paper. Our simulation results show that the proposed schemes show the superiority over the state-of-art benchmark method. We also provide insights on the impact of different RIS parameter settings on the proposed schemes. [ABSTRACT FROM AUTHOR]

A hybrid communication network with a common analog source signal and independent digital data streams at the transmitters of a multiple access network is considered. The receiver has to estimate the analog signal samples with a given fidelity, and decode the digital streams with a low error probability. The main goal of this paper is to characterize the optimal tradeoff between the mean-squared error distortion in source estimation and the data rates available to each user. To this end, we consider a Gaussian multiple access channel (GMAC) setup with additive state, where the state is nothing but a scaled version of the source process itself. The state process is assumed to be non-causally available to all the transmitting nodes. The problem now becomes that of the joint state estimation and message communication in a GMAC with state. We provide a complete characterization of the optimal distortion-rate tradeoff for an $N$ —sender GMAC. Our results show that, similar to the single-user results, it is optimal to amplify the state using uncoded transmissions, whereas the digital streams are superposed using appropriate Gaussian codebooks in conjunction with dirty paper coding (DPC). Since the variance of the additive state is controlled by a scaling factor in our model, we also recover the results for communicating a common source and independent messages over a GMAC without state as a special case. [ABSTRACT FROM AUTHOR]

In this paper, two different timing-mismatch compensation strategies for two-channel time-interleaved analog-to-digital converters are comprehensively analyzed and compared. In the first strategy (SA), one channel serves as a reference channel, and the other channel is compensated to match the reference channel using the timing mismatch between the channels. In the second strategy (SB), both channels are compensated to match each other, using half the value of the channel mismatch with different signs. For SB, the paper introduces a novel compensation structure that utilizes parallel differentiator-multiplier (PDM) branches. Expressions for the spurious-free dynamic range (SFDR) after compensation are derived for both strategies. These expressions reveal that the novel PDM structure achieves a remarkably greater SFDR than the existing cascaded differentiator-multiplier (CDM) compensation structure which can be used for both SA and SB. This is because, after compensation, the remaining aliasing distortion in the proposed PDM structure is shown to be of higher approximation order (in terms of the mismatch value) and thus substantially smaller than in the CDM structure. Simulations included in the paper validate the theoretical results. [ABSTRACT FROM AUTHOR]

Anti-eavesdropping channel estimation (ANECE) is useful for a network of cooperative full-duplex radio devices/users. Using ANECE, a secret key can be generated by each pair of users, and additional secret information can be transmitted between a pair of users. This paper analyzes the capacity of the secret key based on ANECE, and compares it with the conventional method for channel training. The paper also analyzes the secrecy capacity of information transmission using an one-way scheme, and compares it with a two-way scheme. It is shown that the total amount of secrecy generated from ANECE can be substantially larger than that based on the conventional method especially when an eavesdropper may have an unlimited number of antennas. The paper also formulates a total secure degree of freedom (TSDoF) of the ANECE based scheme, and compares it with a prior scheme of secret information transmission from a multi-antenna node to another against a multi-antenna eavesdropper where channel state information is unknown everywhere initially. The comparison shows that there is a substantial gain of TSDoF by exploiting full-duplex radios and reciprocal channels via ANECE. Most of the key insights are highlighted in twelve proven properties. [ABSTRACT FROM AUTHOR]

An accurate discrimination on moisture status of oil-impregnated paper (OIP) bushings is crucial for the maintenance and replacement schedule of bushings. Based on frequency-domain spectroscopy (FDS) measurement and Dissado–Hill (DH) relaxation model, this article proposes a hybrid approach of hidden Markov model and gray wolf optimization (GWO-HMM) for MS estimation of bushings subjected to the ununiform moisture distribution and dynamic time-series modeling. First, simulation models of moisture diffusion and FDS of the OIP bushing were constructed using finite element modeling approach. Then, the GWO algorithm was employed to explore dielectric parameters influenced by moisture in the DH model. Then, the GWO-HMMs was adopted as a classification tool to discriminate the MS of the simulation and experimental data of the bushings. Classification results confirm that the average identification accuracies of the proposed method are 97.17% and 96.81% over these two datasets, which demonstrates the effectiveness of the proposed moisture estimate method for OIP bushings. [ABSTRACT FROM AUTHOR]

This paper considers a massive random access problem in which a large number of sporadically active devices wish to communicate with a base station (BS) equipped with massive multiple-input multiple-output (MIMO) antennas. Each device is preassigned a unique signature sequence, and the BS identifies the active devices by detecting which sequences are transmitted. This device activity detection problem can be formulated as a maximum likelihood estimation (MLE) problem for which the sample covariance matrix of the received signal is a sufficient statistic. The goal of this paper is to characterize the feasible set of problem parameters under which this covariance based approach is able to successfully recover the device activities in the massive MIMO regime. Through an analysis of the asymptotic behaviors of MLE via its associated Fisher information matrix, this paper derives a necessary and sufficient condition on the Fisher information matrix to ensure a vanishing probability of detection error as the number of antennas goes to infinity, based on which a numerical phase transition analysis is obtained. This condition is also examined from a perspective of covariance matching, which relates the phase transition analysis to a recently derived scaling law. Further, we provide a characterization of the distribution of the estimation error in MLE, based on which the error probabilities in device activity detection can be accurately predicted. Finally, this paper studies a random access scheme with joint device activity and data detection and analyzes its performance in a similar way. [ABSTRACT FROM AUTHOR]

This paper derives the optimal test channel distribution and the complete characterization of the classical Gorbunov and Pinsker (1973), Gorbunov and Pinsker (1974) nonanticipatory epsilon entropy of multivariate Gaussian Markov sources with square-error fidelity, which remained an open problem since 1974. The paper also formulates a state dependent nonanticipatory epsilon entropy, in which past reproductions are available to the decoder and not to the encoder, the test channel is specified with respect to an auxiliary (state) random process, and the reproduction process is a causal function of past reproduction and the auxiliary random process. This variation is analogous to the Wyner and Ziv (1976) and Wyner (1978) rate distortion function (RDF), of memoryless sources. It is shown that the operational rate of zero-delay codes, with past reproductions available to the decoder but not to the encoder is bounded below by the state dependent nonanticipatory epsilon entropy rate. For the case of multivariate Gaussian Markov sources with square-error fidelity, the optimal test channel distribution and the complete characterization of the state dependent of nonanticipatory epsilon entropy are derived, and also shown that that the two nonanticipatory epsilon entropies coincide. The derivations are new; they are based on structural properties of the stochastic realizations of the reproduction process that induce the optimal test channel distributions. They are derived using, achievable lower bounds on information theoretic measures, properties of mean-square estimation theory, Hadamard’s inequality, and canonical correlation coefficients of a tuple of multivariate jointly Gaussian random processes. Applications of the nonanticipatory epsilon entropy and its state dependent variation are discussed to the areas of control of unstable Gaussian systems over limited memory channels, design of causal estimators for Gaussian Markov sources with a fidelity criterion, computation of the rate loss of causal and zero-delay codes of Gaussian Markov sources with respect to non-causal codes. [ABSTRACT FROM AUTHOR]

In this paper, we design receivers for filter bank multicarrier-based (FBMC-based) massive MIMO considering practical aspects such as channel estimation and equalization. In particular, we propose a spectrally efficient pilot structure and a channel estimation technique in the uplink to jointly estimate all the users’ channel impulse responses. We mathematically analyze our proposed channel estimator and find the statistics of the channel estimation errors. These statistics are incorporated into our proposed equalizers to deal with the imperfect channel state information (CSI) effect. We revisit the channel equalization problem for FBMC-based massive MIMO, address the shortcomings of the existing equalizers in the literature, and make them more applicable to practical scenarios. The proposed receiver in this paper consists of two stages. In the first stage, a linear combining of the received signals at the base station (BS) antennas provides a coarse channel equalization and removes any multiuser interference. In the second stage, a per subcarrier fractionally spaced equalizer (FSE) takes care of any residual distortion of the channel for the user of interest. We propose an FSE design based on the equivalent channel at the linear combiner output. This enables the applicability of our proposed technique to small and/or distributed antenna setups such as cell-free massive MIMO. Finally, the efficacy of the proposed techniques is corroborated through numerical analysis. [ABSTRACT FROM AUTHOR]

Cell-free massive MIMO is one of the key technologies for future wireless communications, in which users are simultaneously and jointly served by all access points (APs). In this paper, we investigate the minimum mean square error (MMSE) estimation of effective channel coefficients in cell-free massive MIMO systems with massive connectivity. To facilitate the theoretical analysis, only single measurement vector (SMV) based MMSE estimation is considered in this paper, i.e., the MMSE estimation is performed based on the received pilot signals at each AP separately. Inspired by the decoupling principle of replica symmetric postulated MMSE estimation of sparse signal vectors with independent and identically distributed (i.i.d.) non-zero components, we develop the corresponding decoupling principle for the SMV based MMSE estimation of sparse signal vectors with independent and non-identically distributed (i.n.i.d.) non-zero components, which plays a key role in the theoretical analysis of SMV based MMSE estimation of the effective channel coefficients in cell-free massive MIMO systems with massive connectivity. Subsequently, based on the obtained decoupling principle of MMSE estimation, likelihood ratio test and the optimal fusion rule, we perform user activity detection based on the received pilot signals at only one AP, or cooperation among the entire set of APs for centralized or distributed detection. Via theoretical analysis, we show that the error probabilities of both centralized and distributed detection tend to zero when the number of APs tends to infinity while the asymptotic ratio between the number of users and pilots is kept constant. We also investigate the asymptotic behavior of oracle estimation in cell-free massive MIMO systems with massive connectivity via random matrix theory. Moreover, in order to demonstrate the potential performance loss of SMV based MMSE estimation, which does not employ the correlation between the received pilot signals at different APs, the multiple measurement vector (MMV) based MMSE estimation, i.e., joint MMSE estimation with pilot signals from all APs, is analyzed via numerical results. Numerical analysis shows that the theoretical analyze with our decoupling principle for the SMV based MMSE estimation of sparse signal vectors with i.n.i.d. non-zero components matches well with the numerical results. [ABSTRACT FROM AUTHOR]

This paper presents the design and bit error rate (BER) analysis of a phase-independent non-orthogonal multiple access (NOMA) system. The proposed NOMA system can utilize amplitude-coherent detection (ACD) which requires only the channel amplitude for equalization purposes. In what follows, three different designs for realizing the detection of the proposed NOMA are investigated. One is based on the maximum likelihood (ML) principle, while the other two are based on successive interference cancellation (SIC). Closed-form expressions for the BER of all detectors are derived and compared with the BER of the coherent ML detector. The obtained results, which are corroborated by simulations, demonstrate that, in most scenarios, the BER is dominated by multiuser interference rather than the absence of the channel phase information. Consequently, the BER using ML and ACD are comparable for various cases of interest. The paper also shows that the SIC detector is just an alternative approach to realize the ML detector, and hence, both detectors provide the same BER performance. [ABSTRACT FROM AUTHOR]

Communication over a random-parameter quantum channel when the decoder is required to reconstruct the parameter sequence is considered. We study scenarios that include either strictly-causal, causal, or non-causal channel side information (CSI) available at the encoder, and also when CSI is not available. This model can be viewed as a form of quantum metrology, and as the quantum counterpart of the classical rate-and-state channel with state estimation at the decoder. Regularized formulas for the capacity-distortion regions are derived. In the special case of measurement channels, single-letter characterizations are derived for the strictly-causal and causal settings. Furthermore, in the more general case of entanglement-breaking channels, a single-letter characterization is derived when CSI is not available. As a consequence, we obtain regularized formulas for the capacity of random-parameter quantum channels with CSI, generalizing previous results by Boche et al., 2016, on classical-quantum channels. Bosonic dirty paper coding is introduced as a consequence, where we demonstrate that the optimal coefficient is not necessarily that of minimum mean-square error estimation as in the classical setting. [ABSTRACT FROM AUTHOR]

Cloud radio access networks (C-RAN) enable a network platform for beyond the fifth generation of communication networks (B5G), which incorporates the advances in cloud computing technologies to modern radio access networks. Recently, rate splitting multiple access (RSMA), relying on multi-antenna rate splitting (RS) at the transmitter and successive interference cancellation (SIC) at the receivers, has been shown to manage the interference in multi-antenna communication networks efficiently. This paper considers applying RSMA in C-RAN. We address the practical challenge of a transmitter that only knows the statistical channel state information (CSI) of the users. To this end, the paper investigates the problem of stochastic coordinated beamforming (SCB) optimization to maximize the ergodic sum-rate (ESR) in the network. Furthermore, we propose a scalable and robust RS scheme where the number of the common streams to be decoded at each user scales linearly with the number of users, and the common stream selection only depends on the statistical CSI. The setup leads to a challenging stochastic and non-convex optimization problem. A sample average approximation (SAA) and weighted minimum mean square error (WMMSE) based algorithm is adopted to tackle the intractable stochastic non-convex optimization and guarantee convergence to a stationary point asymptotically. The numerical simulations demonstrate the efficiency of the proposed RS strategy and show a gain up to 27% in the achievable ESR compared with state-of-the-art schemes, namely treating interference as noise (TIN) and non-orthogonal multiple access (NOMA) schemes. [ABSTRACT FROM AUTHOR]

In underwater acoustic (UWA) adaptive communication system, due to time-varying channel, the transmitter often has outdated channel state information (CSI), which results in low efficiency. UWA channels are much more difficult to estimate and predict than terrestrial wireless channels, given the more severe multipath environments with varying propagation speeds in different locations, non-linear propagation paths, several-order higher propagation latency, mobile transceiver and obstacles in the sea, etc. To handle the complexity, this paper proposes an efficient online CSI prediction model for UWA CSI prediction considering the complicated correlationship of UWA channels in both the time and frequency domains. This paper designs a learning model called CsiPreNet, which is an integration of a one-dimensional convolutional neural network (CNN) and a long short term memory (LSTM) network. The performance is compared with the widely used recursive least squares (RLS) predictor, the approximate linear dependency recursive kernel least-squares (ALD-KRLS), and two common conventional deep neural networks (DNN) predictors, i.e., back propagation neural network (BPNN) and LSTM network using the measured data recorded in the South China Sea. To validate the efficacy of prediction, we investigate the prediction of CSI in simulated downlink UWA orthogonal frequency division multiple access (OFDMA) systems. Specifically, the measured UWA channel is used in the OFDMA system. A joint subcarrier-bit-power adaptive allocation scheme is used for resource allocation. To further improve the performance, we develop an offline-online prediction scheme, enabling the prediction results to be more stable. Simulation and experimental results show that the CsiPreNet has superior performance than the existing solutions, thanks to its capability in capturing both the temporal and frequency correlation of the UWA CSIs. [ABSTRACT FROM AUTHOR]

In conventional multi-user multiple-input multiple-output (MU-MIMO) systems with frequency division duplexing (FDD), channel acquisition and precoder optimization processes have been designed separately although they are highly coupled. This paper studies an end-to-end design of downlink MU-MIMO systems which include pilot sequences, limited feedback, and precoding. To address this problem, we propose a novel deep learning (DL) framework which jointly optimizes the feedback information generation at users and the precoder design at a base station (BS). Each procedure in the MU-MIMO systems is replaced by intelligently designed multiple deep neural networks (DNN) units. At the BS, a neural network generates pilot sequences and helps the users obtain accurate channel state information. At each user, the channel feedback operation is carried out in a distributed manner by an individual user DNN. Then, another BS DNN collects feedback information from the users and determines the MIMO precoding matrices. A joint training algorithm is proposed to optimize all DNN units in an end-to-end manner. In addition, a training strategy which can avoid retraining for different network sizes for a scalable design is proposed. Numerical results demonstrate the effectiveness of the proposed DL framework compared to classical optimization techniques and other conventional DNN schemes. [ABSTRACT FROM AUTHOR]

In this paper, we propose a novel state-space model to represent the behavior of sum-product algorithm (SPA) in the vicinity of a trapping set (TS) of a low-density parity-check (LDPC) code over the additive white Gaussian noise (AWGN) channel in the error floor region. The proposed model takes into account the non-linear behavior of SPA in the initial iterations using a quadratic approximation, and dynamically adjusts the operating point of the model in accordance to the statistical properties of TS messages. This is in contrast to the existing linear state-space models which linearly approximate the non-linear behavior of SPA at around the operating point of zero in all iterations. Simulation results are provided to demonstrate the higher accuracy of the proposed model in estimating the error floor of LDPC codes compared to the linear state-space model. We also make connections to the semi-analytical code-dependent technique proposed by Richardson for the error floor estimation of LDPC codes, and demonstrate that the proposed state-space model not only is a fully-analytical code-independent counterpart to that method, but also has less complexity and, in some cases, more accuracy. [ABSTRACT FROM AUTHOR]

Reconfigurable intelligent surface (RIS) can be employed in a cell-free system to create favorable propagation conditions from base stations (BSs) to users via configurable elements. However, prior works on RIS-aided cell-free system designs mainly rely on the instantaneous channel state information (CSI), which may incur substantial overhead due to extremely high dimensions of estimated channels. To mitigate this issue, a low-complexity algorithm via the two-timescale transmission protocol is proposed in this paper, where the joint beamforming at BSs and RISs is facilitated via alternating optimization framework to maximize the average weighted sum-rate. Specifically, the passive beamformers at RISs are optimized through the statistical CSI, and the transmit beamformers at BSs are based on the instantaneous CSI of effective channels. In this manner, a closed-form expression for the achievable weighted sum-rate is derived, which enables the evaluation of the impact of key parameters on system performance. To gain more insights, a special case without line-of-sight (LoS) components is further investigated, where a power gain on the order of $\mathcal {O}(M)$ is achieved, with $M$ being the BS antennas number. Numerical results validate the tightness of our derived analytical expression and show the fast convergence of the proposed algorithm. Findings illustrate that the performance of the proposed algorithm with two-timescale CSI is comparable to that with instantaneous CSI in low or moderate SNR regime. The impact of key system parameters such as the number of RIS elements, CSI settings and Rician factor is also evaluated. Moreover, the remarkable advantages from the adoption of the cell-free paradigm and the deployment of RISs are demonstrated intuitively. [ABSTRACT FROM AUTHOR]

In optical fiber communication, due to the random variation of the environment, the state of polarization (SOP) fluctuates randomly with time leading to distortion and performance degradation. The memory-less SOP fluctuations can be regarded as a two-by-two random unitary matrix. In this paper, for what we believe to be the first time, the capacity of the polarization drift channel under an average power constraint with imperfect channel knowledge is characterized. An achievable information rate (AIR) is derived when imperfect channel knowledge is available and is shown to be highly dependent on the channel estimation technique. It is also shown that a tighter lower bound can be achieved when a unitary estimation of the channel is available. However, the conventional estimation algorithms do not guarantee a unitary channel estimation. Therefore, by considering the unitary constraint of the channel, a data-aided channel estimator based on the Kabsch algorithm is proposed, and its performance is numerically evaluated in terms of AIR. Monte Carlo simulations show that Kabsch outperforms the least-square error algorithm. In particular, with complex, Gaussian inputs and eight pilot symbols per block, Kabsch improves the AIR by 0.20 to 0.30 bits/symbol throughout the range of studied signal-to-noise ratios. [ABSTRACT FROM AUTHOR]

In this paper, we investigate the performance of an intelligent omni-surface (IOS) assisted downlink non-orthogonal multiple access (NOMA) network with phase quantization errors and channel estimation errors, where the channels related to the IOS are spatially correlated. First, upper bounds on the average achievable rates of the two users are derived. Then, channel hardening is shown to occur in the proposed system, based on which we derive approximations of the average achievable rates of the two users. The analytical results illustrate that the proposed upper bound and approximation on the average achievable rates are asymptotically equivalent in the number of elements. Furthermore, it is proved that the asymptotic equivalence also holds for the average achievable rates with correlated and uncorrelated channels. Additionally, we extend the analysis by evaluating the average achievable rates for IOS assisted orthogonal multiple access (OMA) and IOS assisted multi-user NOMA scenarios. Simulation results corroborate the theoretical analysis and demonstrate that: i) low-precision elements with only two-bit phase adjustment can achieve the performance close to the ideal continuous phase shifting scheme; ii) The average achievable rates with correlated channels and uncorrelated channels are asymptotically equivalent in the number of elements; iii) IOS-assisted NOMA does not always perform better than OMA due to the reconfigurability of IOS in different time slots. [ABSTRACT FROM AUTHOR]

Channel estimation is a challenging issue for millimeter wave (mmWave) and massive multiple-input multiple-output (MIMO) in the future sixth generation (6G) wireless systems, where the conventional estimation schemes may fail to track the fast varying channels, especially in high-speed mobile scenarios. In this paper, a novel tensor-based uplink channel estimation scheme is proposed for multi-user MIMO (MU-MIMO) systems over time-varying channels. In the proposed scheme, a low-overhead pilot transmission scheme is designed to track the varying channel. The received uplink signal at the base station (BS) is formulated as a third-order tensor which admits a CANDECOMP/PARAFAC (CP) model. The CP decomposition issue is then solved using blind matrix decomposition, in which the special structures of signals in the time dimension and the matrix subspace are utilized. By exploiting low-rank structure of the signal tensor, the channel parameters (angles of arrival/departure, path gains, and Doppler shifts) are estimated from the factor matrices. Moreover, the proposed scheme is theoretically analyzed and it is guaranteed with low pilot overhead. Simulation results verify that the proposed scheme can outperform the compressed sensing (CS) based scheme and the iteration-based scheme in terms of accuracy and stability. The uniqueness of the proposed scheme is also verified in our simulation. [ABSTRACT FROM AUTHOR]

Millimeter wave (mmWave) frequency spectrum offers orders of magnitude greater spectrum to mitigate the severe spectrum shortage in conventional cellular bands. To overcome the high propagation loss in the mmWave band, massive multiple-input and multiple-output (MIMO) can be adopted at both transmitter and receiver to provide large beamforming gains. At the same time, hybrid architecture is applied to reduce the huge power consumption caused by devices operating at radio frequency (RF). However, because of the hybrid architecture and large number of antennas, it is hard to obtain the channel state information (CSI) which is crucial for obtaining desirable beamforming gains. Off-grid error and sparsity pattern (SP) estimation error are two main limiting factors of the performance of most existing compressive sensing (CS) based channel estimation (CE) algorithms. Off-grid error presents when the true angle does not lie on the discretized angle grid of mmWave channel in the spatial domain. In this paper, we first propose a fast Bayesian matching pursuit method with ‘virtual sparsity’ to improve the accuracy of SP estimation and name it as the improved Bayesian matching pursuit (IBMP). Then an enhanced algorithm, named off-grid IBMP (OG-IBMP), is developed to mitigate the off-grid problem, followed by a theoretical analysis of OG-IBMP. This method iteratively updates the selected grid points and updates the corresponding parameters based on the maximum a posteriori (MAP) criterion. Numerical simulations are performed to validate our theoretical analysis and evaluate the performance of the proposed method. Compared to other existing methods, the results show that our proposed OG-IBMP algorithm greatly reduces the off-grid error and significantly enhances the accuracy of the SP estimation with low computational complexity. [ABSTRACT FROM AUTHOR]

This article studies the zero-error feedback capacity of causal discrete channels with memory. First, by extending the classical zero-error feedback capacity concept, a new notion of uniform zero-error feedback capacity $C_{0f} $ for such channels is introduced. Using this notion a tight condition for bounded stabilization of unstable noisy linear systems via causal channels is obtained, assuming no channel state information at either end of the channel. Furthermore, the zero-error feedback capacity of a class of additive noise channels is investigated. It is known that for a discrete channel with correlated additive noise, the ordinary capacity with or without feedback is equal $\log q-\mathcal {H}_{ch} $ , where $\mathcal {H}_{ch} $ is the entropy rate of the noise process and $q $ is the input alphabet size. In this paper, for a class of finite-state additive noise channels (FSANCs), it is shown that the zero-error feedback capacity is either zero or $C_{0f} =\log q -h_{ch} $ , where $h_{ch} $ is the topological entropy of the noise process. A condition is given to determine when the zero-error capacity with or without feedback is zero. This, in conjunction with the stabilization result, leads to a “Small-Entropy Theorem”, stating that stabilization over FSANCs can be achieved if the sum of the topological entropies of the linear system and the channel is smaller than $\log q$. [ABSTRACT FROM AUTHOR]

Faced with massive data, subsampling is a commonly used technique to improve computational efficiency, and using nonuniform subsampling probabilities is an effective approach to improve estimation efficiency. For computational efficiency, subsampling is often implemented with replacement or through Poisson subsampling. However, no rigorous investigation has been performed to study the difference between the two subsampling procedures such as their estimation efficiency and computational convenience. This paper performs a comparative study on these two different sampling procedures. In the context of maximizing a general target function, we first derive asymptotic distributions for estimators obtained from the two sampling procedures. The results show that the Poisson subsampling may have a higher estimation efficiency. Based on the asymptotic distributions for both subsampling with replacement and Poisson subsampling, we derive optimal subsampling probabilities that minimize the variance functions of the subsampling estimators. These subsampling probabilities further reveal the similarities and differences between subsampling with replacement and Poisson subsampling. The theoretical characterizations and comparisons on the two subsampling procedures provide guidance to select a more appropriate subsampling approach in practice. Furthermore, practically implementable algorithms are proposed based on the optimal structural results, which are evaluated through both theoretical and empirical analyses. [ABSTRACT FROM AUTHOR]

Reconfigurable intelligent surfaces (RISs) have emerged as a promising technology for millimeter wave (mmWave) networks. In this paper, we utilize tools from stochastic geometry to study the performance of a RIS-assisted mmWave cellular network. Specifically, the locations of the base stations (BSs) and the midpoints of the blockage are modeled as two independent Poisson point processes (PPPs), where the blockages are modeled by a Boolean model and a fraction of the blockages are coated with RISs. The particular characteristics of mmWave communications, i.e., directional beamforming and different path loss laws for line-of-sight (LOS) and non-line-of-sight (NLOS) propagation, are incorporated into our analysis. We derive analytical expressions for the success probability and the area spectral efficiency. The success probability under the special case where the blockage parameter is sufficiently small is also derived. Numerical results demonstrate that better coverage performance and higher energy efficiency can be achieved by a large-scale deployment of RISs. In addition, the tradeoff between the BS and RIS densities is investigated and the results show that the RISs can indeed enable the traditional networks to improve the success probability, especially for the cell-edge region, with limited power consumption. [ABSTRACT FROM AUTHOR]

This paper considers a cell-free massive multiple-input multiple-output network (cfm-MIMO) with a massive number of access points (APs) distributed across an area to deliver information to multiple users. Based on only local channel state information, conjugate beamforming is used under both proper and improper Gaussian signalings. To accomplish the mission of cfm-MIMO in providing fair service to all users, the problem of power allocation to maximize the geometric mean (GM) of users’ rates (GM-rate) is considered. A new scalable algorithm, which iterates linear-complex closed-form expressions and thus is practical regardless of the scale of the network, is developed for its solution. The problem of quality-of-service (QoS) aware network energy-efficiency is also addressed via maximizing the ratio of the GM-rate and the total power consumption, which is also addressed by iterating linear-complex closed-form expressions. Intensive simulations are provided to demonstrate the ability of the GM-rate based optimization to achieve multiple targets such as a uniform QoS, a good sum rate, and a fair power allocation to the APs. [ABSTRACT FROM AUTHOR]

Massive multiple-input multiple-output (MIMO) integrated with millimeter-wave (mmWave) can provide unprecedented performance improvement for realizing future wireless communications. However, acquiring accurate channel state information in wideband mmWave massive MIMO systems with hybrid transceiver architectures is even challenging, especially in high-mobility scenarios with severe Doppler effects. In this paper, we propose a tensor decomposition-based method to estimate the time-varying and frequency-selective (TVFS) mmWave MIMO channels. Specifically, by exploiting the sparse scattering nature of TVFS channels, we model the frequency-domain received signal as a third-order tensor that admits a canonical polyadic (CP) decomposition format. Then, we analyze the uniqueness condition of the proposed CP decomposition-based channel estimation problem and propose a novel estimator to acquire TVFS channel parameters including angle of departure/arrival (AoD/AoA), time delay, path gain, and the Doppler shift. To address the sophisticated coupling among unknown parameters, we further propose a joint AoD and Doppler shift estimation (JADE) algorithm that provides reliable initial and iteratively refined estimates. The derived analysis and simulation results verify that the proposed JADE algorithm achieves higher estimation accuracy and guarantees the superiority of the proposed TVFS channel estimator over existing schemes. [ABSTRACT FROM AUTHOR]

Reconfigurable intelligent surface (RIS) is a passive antenna array composed of a large number of reflecting elements. In a RIS-assisted communication system, it is a challenging task to acquire accurate channel state information (CSI). In this paper, we propose a semi-blind channel estimation method for a RIS-assisted massive multiple-input single-output (MISO) system. Assuming a Gaussian priori on the data symbols, an iterative expectation maximization (EM)-based algorithm is developed to obtain the maximum likelihood (ML) estimate of the cascaded RIS channel. Different from existing pilot-based methods, the proposed semi-blind channel estimation method exploits the data symbols for channel estimation enhancement and only a fraction of full-pilot signaling overhead is required. Simulation results verify that the proposed method achieves significant improvement in the accuracy of the channel estimation while it noticeably reduces the training pilot overhead. [ABSTRACT FROM AUTHOR]

The efficiency of link adaptation in wireless communications relies greatly on the accuracy of channel knowledge and transmission mode selection. In this paper, a novel deep learning based link adaptation framework is proposed for the orthogonal frequency-division multiplexing (OFDM) systems with compressed-sensing-assisted index modulation, termed as OFDM-CSIM, communicating over millimeter-wave (mmWave) channels. To achieve link adaptation, a novel multi-layer sparse Bayesian learning (SBL) algorithm is proposed for accurately and instantaneously providing the required channel state information. Meanwhile, a deep neural networks (DNN)-assisted adaptive modulation algorithm is proposed to choose the best possible transmission mode to maximize the achievable throughput. Simulation results show that the proposed multi-layer SBL algorithm enables more accurate channel estimation than the conventional techniques. The DNN-based adaptive modulator is capable of achieving a higher throughput than the learning-assisted solution based on the $k$ nearest neighbor ($k$ -NN) algorithm, and also the classic average signal-to-noise ratio (SNR)-based solutions. Moreover, analysis shows that both the multi-layer SBL algorithm and the DNN-assisted adaptive modulator achieve better performance than their respective conventional counterparts while at a significantly lower computational complexity cost. [ABSTRACT FROM AUTHOR]

Due to the combined effects of different acoustic propagation, reflection patterns in different time-scale, time-varying underwater acoustic (UWA) channel generally exhibits hybrid sparsity, i.e., contains not only rapidly time-varying elements, but also stationary or slowly time-varying ones. While the classic sparse reconstruction algorithms such as orthogonal matching pursuit (OMP) generally do not take it into account, the existence of static multipath will unavoidably hinder the tracking of rapid time variations. In this paper, a sequential adaptive observation length orthogonal matching pursuit (SAOLOMP) approach is proposed to sequentially explore rapidly time-varying sparsity in a two-step sequential manner. Specifically, the static components are firstly separated via simultaneous orthogonal matching pursuit (SOMP) among continuous measurements. Upon the residual error of the SOMP, the measurement-wise OMP is applied for estimating the remained dynamic components. As the variation of the SOMP residual error indicates how rapidly the remained dynamic multipath components vary, the observation length of the OMP is adjusted according to the gradient of residual error to adapt to rapidly time-varying components. Finally, both types of sparse components are summed up to obtain the whole channel response. Numerical simulations as well as experimental results from field UWA communication data show that the proposed algorithm exhibits better performance in exploiting rapidly time-varying sparsity than the state-of-the-art compressive methods do under UWA channel. [ABSTRACT FROM AUTHOR]

In connected vehicular networks, it is vital to have vehicular nodes that are capable of sensing surrounding environments and exchanging messages with each other for automating and coordinating purposes. Towards this end, integrated sensing and communication (ISAC), combining both sensing and communication systems to jointly utilize their resources and pursue mutual benefits, emerges as a new cost-effective solution. In ISAC, the hardware and spectrum co-sharing leads to a fundamental tradeoff between sensing and communication performance, which is not well understood except for very simple cases with the same sensing and channel states, and perfect channel state information at the receiver (CSIR). In this paper, a general point-to-point ISAC model is proposed to account for the scenarios where the sensing state is different from but correlated with the channel state, and the CSIR is not necessarily perfect. For the model considered, the optimal tradeoff is characterized by a capacity-distortion function that quantifies the best communication rate for a given sensing distortion constraint requirement. An iterative algorithm is proposed to compute such tradeoff, and a few non-trivial examples are constructed to demonstrate the benefits of ISAC as compared to the separation-based approach. [ABSTRACT FROM AUTHOR]

In this paper, we propose a reference-free artificial noise (AN) waveform design and cancellation scheme for single-input-single-output (SISO) wireless secure transmission. First, a system structure with the aid of AN is presented, where we provide a specific method extracting the sign information of each symbol from the desired signal (DS) to form AN at the transmitter. Then, we notice that the legitimate receiver enable to reconstruct the AN from the received signal by almost the same method as the transmitter without AN reference, which reduces the system complexity in practice. Subsequently, the AN cancellation performance and the secrecy capacity at the receiver are analyzed, and their upper bounds are also derived. Finally, simulation results confirm that the proposed reference-free AN design and cancellation scheme can effectively suppress the AN at legitimate receiver, while degrades the signal to noise ratio (SNR) at eavesdropper seriously, which provides impressive secure performance in terms of secrecy capacity. [ABSTRACT FROM AUTHOR]

Recently, research on the design of relay structure and optimal precoding matrix in massive multiple-input multiple-output (MIMO) relay systems has been proposed in many works assuming that partial or all of the channel state information (CSI) is known. However, in the practical communication systems, the CSI is unknown and needs to be estimated. In particular, channel estimation is more difficult when the relay adopts a hybrid precoding structure. In this paper, we propose an efficient channel estimation scheme based on Tucker-2 tensor model for a multi-way massive MIMO hybrid relay system. The proposed algorithm provides all the CSI involved in the communication links at each user end. Compared with traditional channel estimation algorithms, the proposed algorithm has better estimation performance and requires few iterations to achieve convergence. In addition, we derive the analytical expression of the Cramér-Rao lower bound (CRB) for reference. Simulation results verify the effectiveness of the proposed Tucker-2-based channel estimation approach. [ABSTRACT FROM AUTHOR]

The active millimeter wave scanner has been widely used for detecting objects concealed underneath a person’s clothing in the field of security inspection and anti-terrorism. However, the active millimeter wave (AMMW) images always suffer from low signal-noise ratio, motion blur, and small size objects, making it challenging to detect concealed objects efficiently and accurately. The scanner usually captures a sequence of images in different views around a human body at once, while the existing algorithms only utilize the single image without considering the relationships among images. In this paper, we design a multi-source aggregation transformer (MATR) with two different attention mechanisms to model spatial correlations within an image and contextual interactions across images. Specifically, a self-attention module is introduced to encode local relationships between the region proposals in each image, while a cross-attention mechanism is built to focus on modeling the cross-correlations between different images. Besides, to handle the problem of small objects in size and suppress the noise in AMMW images, we present a selective context module (SCM). It designs a dynamic selection mechanism to enhance the high-resolution feature with spatial details and make it more distinguishable from the noisy background. Experiments on two AMMW image datasets demonstrate that the proposed methods lead to a remarkable improvement compared to previous state-of-the-art and will benefit the concealed object detection in practice. [ABSTRACT FROM AUTHOR]

The current cellular systems are conventional cell-centric based architectures, and thus the inter-cell interference greatly affects the quality of service (QoS) of users located at the border of those service areas. For that reason, future wireless systems will rely on a cell-less deployment by using an alternative promising network infrastructure known as cell-free (CF) technology. Here, in contrast to the current networks, there are no concepts of cells or cell boundaries since it is a disruptive paradigm where a large number of geographically distributed access points (APs) simultaneously and jointly serve a much smaller number of user terminals (UTs) to fulfill the exponentially increasing number of users. Therefore, this paper aims to contribute on this field and considers the design of hybrid analog/digital multi-user equalizer for broadband millimeter wave (mmWave) CF massive multiple-input multiple-output (mMIMO) systems, using a distributed beamforming approach (processing is distributed by APs and central unit (CU)) to reduce the fronthaul requirements. First, only a low complexity analog precoder is applied to the transmitter, while a joint design of APs hybrid equalizer and CU combiner are considered by minimizing the average mean square error (MSE) between the transmitted and CU estimated signals. To achieve this joint design, a cyclic minimization method is used to iterate between APs hybrid equalizer and CU combiner, where the information is exchanged between APs and CU based on a set of error variances to improve detection performance. The simulation results show that the proposed precoder and the hybrid linear equalizer can achieve performance results very close to those of the fully digital system. Moreover, just two iterations of the proposed algorithm are already enough to match the full centralized approach performance. [ABSTRACT FROM AUTHOR]

This paper presents a novel antenna configuration to measure directions of multiple signal sources at the receiver in a THz mobile network via a single channel measurement. Directional communication is an intrinsic attribute of THz wireless networks and the knowledge of direction should be harvested continuously to maintain link quality. Direction discovery can potentially impose an immense burden on the network that limits its communication capacity exceedingly. To utterly mitigate direction discovery overhead, we propose a novel technique called spectrum shaping capable of measuring direction, power, and relative distance of propagation paths via a single measurement. We demonstrate that the proposed technique is also able to measure the transmitter antenna orientation. We evaluate the performance of the proposed design in several scenarios and show that the introduced technique performs similar to a large array of antennas while attaining a much simpler hardware architecture. Results show that the spectrum shaping with only two antennas placed 0.5 mm, 5 mm, and 1 cm apart performs direction of arrival estimation similar to a much more complex uniform linear array equipped with 7, 60, and 120 antennas, respectively. [ABSTRACT FROM AUTHOR]

Reconfigurable intelligent surface (RIS) is a revolutionary technology and can be used to assist communication systems by adaptively manipulating the wireless environment. In this paper, we propose a novel cascaded channel estimation algorithm for the RIS-assisted multiple-input multiple-output orthogonal frequency division multiplexing systems. Inspired by the channel compression idea, we can obtain a sub-sampled channel by turning off a fraction of RIS elements and then extrapolate it to the complete one, by which the pilot overhead is greatly reduced. The problem of channel extrapolation is transformed into recovering the physical parameters of the cascaded channel from the partial channel observations and is then formulated by the sparse Bayesian learning (SBL) framework. In order to circumvent the curse of high dimensional matrices inversion in the vector-matrix system, we further introduce the tensor structure into the SBL framework. Specially, by leveraging of the channel sparsity over the angle domain and delay domain, we derive the virtual channel expression in tensor form and model a Kronecker-structured prior distribution for the virtual channels. The multi-domain sparse properties of the virtual channel tensor can be effectively captured by a group of low-dimensional hyper-parameters, and thus reduce the computational complexity. In addition, the Cramer-Rao lower bound is derived for the proposed channel extrapolation. Simulation results show the superior performance of the proposed scheme. [ABSTRACT FROM AUTHOR]

Orthogonal time frequency space (OTFS) has emerged as the most sought-after modulation technique in a high mobility scenario. Sparse code multiple access (SCMA) is an attractive code-domain non-orthogonal multiple access (NOMA) technique. Recently a code-domain NOMA approach for OTFS, named OTFS-SCMA, is proposed. OTFS-SCMA is a promising framework that meets the demands of high mobility and massive connectivity. This paper presents a channel estimation technique based on the convolutional sparse coding (CSC) approach for OTFS-SCMA in the uplink. The channel estimation task is formulated as a CSC problem following a careful rearrangement of the OTFS input-output relation. We use an embedded pilot-aided sparse-pilot structure that enjoys the features of both OTFS and SCMA. The existing channel estimation techniques for OTFS in multi-user scenarios for uplink demand extremely high overhead for pilot and guard symbols, proportional to the number of users. The proposed method maintains a minimal overhead equivalent to a single user without compromising on the estimation error. The results show that the proposed channel estimation algorithm is very efficient in bit error rate (BER), normalized mean square error (NMSE), and spectral efficiency (SE). [ABSTRACT FROM AUTHOR]

Channel estimation is one of the main challenges for implementing reconfigurable intelligent surface (RIS)-aided communication system with a large number of antennas at the base station (BS) because RIS is equipped with many passive reflective elements without active transmitting/receiving and signal processing abilities. In this paper, we focus on the channel estimation in a general RIS-aided multi-user mmWave communication system. Specifically, a novel two-phase channel estimation scheme consisting of on-line and off-line phases is proposed to estimate the BS-RIS channel, RIS-user channel, and BS-user channel, respectively. Inspired by the characteristics of few scatterers in mmWave communication systems, the antenna domain channels are converted into the virtual angular domain channels by using the discrete Fourier transform (DFT) matrix. Thus, the estimation problem can be formulated as a compressed sensing (CS) problem, and solved by using efficient vector approximate message passing (VAMP) algorithm with expectation-maximization (EM) to learn unknown parameters and obtain the estimates simultaneously. Simulation results show that, the above algorithm with two choices of prior distributions in the proposed mmWave RIS-aided multi-user system has fast convergence speed and desirable estimation performance. [ABSTRACT FROM AUTHOR]

To further mitigate the BER error floor of $M$ -ary differential chaos shift keying (MDCSK) modulation for impulsive noise, a low-cost high-reliability coded modulation scheme without equalizations is desirable for impulsive noise. In this paper, a protograph-based low-density parity-check coded MDCSK-based bit-interleaved coded modulation (MDCSK-BICM) scheme is proposed for the scenario with impulsive noise obeying Bernoulli-Laplace distribution. Considering the Gaussian distribution of protograph extrinsic information transfer (PEXIT) and the benchmark of coding design, the U-shaped non-coherent capacity is derived with optimal code rate for square MDCSK, showing that the code rates are stable with $E_b/N_0$ increasing but still much lower than that of DS-16DQAM at code rate $>\!0.145$. The derived joint probability density function can be considered as approximately a Gaussian distribution, which is used to improve the impulsive noise fitted PEXIT. Finally, a new code under a novel principle is designed for better bit error rate performance based on the improved PEXIT analysis. Both PEXIT analysis and simulation results demonstrate that the proposed scheme achieves a better BER than that with a traditional scheme, and suggesting a research approach based on simple methods. This basic research work provides a guide to establish a framework and optimize the performance of transmission systems over practical power line communication. [ABSTRACT FROM AUTHOR]

Reconfigurable intelligent surfaces (RISs) and cell-free (CF) massive multiple-input multiple-output (MIMO) are two promising technologies for realizing beyond-fifth generation (5G) networks. In this paper, we study the uplink spectral efficiency (SE) of a practical spatially correlated RISs-aided CF massive MIMO system over Rician fading channels. Specifically, we derive the closed-form expression for characterizing the uplink SE of the system, which shows that increasing the number of RIS elements can improve the system performance. Moreover, the results unveil that the spatial correlation of RIS has a significant impact on the system while leading to the best performance gain at a half wavelength spacing. Finally, the accuracy of our analytical results are verified by Monte-Carlo simulations. [ABSTRACT FROM AUTHOR]

Intelligent reflecting surface (IRS)-enhanced wireless communication is one of the critical technologies of the sixth generation mobile communication, which has recently emerged as an innovative solution to the realization of intelligent transportation. It can meet the increasing demand for high-speed railway (HSR) communications services. In this paper, we consider a train-ground TDD wireless mobile communication paradigm to deploy two IRSs on the roadside and the train roof to assist the wireless transmission for the HSR communication system. To achieve the more significant performance gain, in the uplink transmission phase, we propose the practical channel estimation framework of the MIMO system aided by double IRSs to acquire reliable channel state information (CSI) of each channel. To facilitate the processing of the three-dimension tensor, we leverage the trilinearity of the parallel factor decomposition to decompose the received signal into a two-dimensional matrix. The Doppler frequency offset compensating scheme and channel tracking scheme based on Kalman-Filter are proposed to further decrease the pilot overheads. Then, in the downlink phase, a block coordinate descent (BCD) algorithm is proposed to handle the data rate maximization problem of double IRSs communication system with the estimated CSI. We reformulate the original problem and decouple the double IRSs phase optimization problem into two single IRS phase optimization non-convex problems under the unit-modulus constraint. The Majorization-Minimization (MM) algorithm is proposed to approximate the optimal solution of the two optimization subproblems. Simulation results corroborate the effectiveness of the proposed channel estimation and phase shifts optimization scheme. [ABSTRACT FROM AUTHOR]

Although LoRa modulation can achieve low-power and long-range transmission, its performance is significantly affected by fading channels. On the other hand, its low data rate limits the capacity. To mitigate these disadvantages, a new reconfigurable intelligent surface (RIS) assisted LoRa uplink system is proposed in this paper, where the reflection coefficients of the RIS are generated by utilizing an $M$ -ary differential phase shift keying modulator. Moreover, a low-complexity non-coherent receiver is designed for the proposed system. The new system is able to inherit the non-coherent detection of the conventional LoRa system and also transmit additional information of $\log _{2}{M}$ bits while reducing the impact of the fading channels. Furthermore, the bit-error-rate, symbol-error-rate and throughput expressions of the system are derived in closed form. Theoretical and simulated results show that the system has better performance than the conventional LoRa system and single-relay LoRa system. [ABSTRACT FROM AUTHOR]

Cognitive radio networks (CRNs) and millimeter wave (mmWave) communications are two major technologies to enhance the spectrum efficiency (SE). Considering that the SE improvement in the CRNs is limited due to the interference temperature imposed on the primary user (PU), and the severe path loss and high directivity in mmWave communications make it vulnerable to blockage events, we introduce an intelligent reflecting surface (IRS) into mmWave CRNs. Due to the estimation mismatch and the passivity of Eavesdroppers (Eves), perfect channel state information (CSI) of wiretap links is challenging to obtain, which promotes our research on robust secure beamforming (BF) design in the IRS-assisted mmWave CRNs. This paper considers the collaborate scenario of Eves, which allows us to investigate the BF design in the harsh eavesdropping environment. Specifically, by using a uniform linear array (ULA) at the cognitive base station (CBS) and a uniform planar array (UPA) at the IRS, and supposing that imperfect CSIs of angle-of-departures for wiretap links are known, we formulate a constrained problem to maximize the worst-case achievable secrecy rate (ASR) of the secondary user (SU) by jointly designing the transmit BF at the CBS and reflect BF at the IRS. To solve the non-convex problem with coupled variables, an efficient alternating optimization algorithm is proposed. As for the transmit BF at the CBS, we propose a heuristic robust transmit BF algorithm to attain the BF vectors analytically. As for the reflect BF at the IRS, by means of an auxiliary variable, we transform the non-convex problem into a semi-definite programming problem with rank-1 constraint, which is handled with the help of an iterative penalty function, and then obtain the optimal reflect BF through CVX. Finally, simulation results indicate that the ASR performance of our proposed algorithm has a small gap with that of the optimal solution with perfect CSI compared with the other benchmarks. [ABSTRACT FROM AUTHOR]

In this paper, we investigate a two-hop simultaneous wireless information and power transfer (SWIPT) amplify-and-forward (AF) multiple-input multiple-output (MIMO) relay communication system with an energy-limited relay node. The relay node harvests energy based on the radio-frequency (RF) signal transmitted from the source node through the time-switching (TS) protocol and fully uses the harvested energy to precode and forward the information to the destination node. The non-linear energy harvesting models are considered at the relay node. With the consideration of the channel estimation error, the joint optimization of the TS factor, source and relay precoding matrices is proposed with robustness against the channel state information (CSI) mismatch to maximize the mutual information (MI) between the source and destination nodes. The optimal structure for the source and relay precoding matrices is derived to simplify the transceiver optimization problem. Numerical simulations show that the system performance provided by the proposed algorithms with robustness is better than the non-robust algorithm. [ABSTRACT FROM AUTHOR]