Search

Abstract This study presents the results of multi-seasonal WorldView-2 (WV-2) satellite images classification for the mapping of Ailanthus altissima (A. altissima), an invasive plant species thriving in a protected grassland area of Southern Italy. The technique used relied on a two-stage hybrid classification process: the first stage applied a knowledge-driven learning scheme to provide a land cover map (LC), including deciduous vegetation and other classes, without the need of reference training data; the second stage exploited a data-driven classification to: (i) discriminate pixels of the invasive species found within the deciduous vegetation layer of the LC map; (ii) determine the most favourable seasons for such recognition. In the second stage, when a traditional Maximum Likelihood classifier was used, the results obtained with multi-temporal July and October WV-2 images, showed an output Overall Accuracy (OA) value of ≈91%. To increase such a value, first a low-pass median filtering was used with a resulting OA of 99.2%, then, a Support Vector Machine classifier was applied obtaining the best A. altissima User's Accuracy (UA) and OA values of 82.47% and 97.96%, respectively, without any filtering. When instead of the full multi-spectral bands set some spectral vegetation indices computed from the same months were used the UA and OA values decreased. The findings reported suggest that multi-temporal, very high resolution satellite imagery can be effective for A. altissima mapping, especially when airborne hyperspectral data are unavailable. Since training data are required only in the second stage to discriminate A. altissima from other deciduous plants, the use of the first stage LC mapping as pre-filter can render the hybrid technique proposed cost and time effective. Multi-temporal VHR data and the hybrid system suggested may offer new opportunities for invasive plant monitoring and follow up of management decision. [ABSTRACT FROM AUTHOR]

Focusing on a Mediterranean Natura 2000 site in Italy, the effectiveness of the cross correlation analysis (CCA) technique for quantifying change in the area of semi-natural grasslands at different spatial resolutions (grain) was evaluated. In a fine scale analysis (2 m), inputs to the CCA were a) a semi-natural grasslands layer extracted from an existing validated land cover/land use (LC/LU) map (1:5000, time T 1 ) and b) a more recent single date very high resolution (VHR) WorldView-2 image (time T 2 ), with T 2 > T 1 . The changes identified through the CCA were compared against those detected by applying a traditional post-classification comparison (PCC) technique to the same reference T 1 map and an updated T 2 map obtained by a knowledge driven classification of four multi-seasonal Worldview-2 input images. Specific changes observed were those associated with agricultural intensification and fires. The study concluded that prior knowledge (spectral class signatures, awareness of local agricultural practices and pressures) was needed for the selection of the most appropriate image (in terms of seasonality) to be acquired at T 2 . CCA was also applied to the comparison of the existing T 1 map with recent high resolution (HR) Landsat 8 OLS images. The areas of change detected at VHR and HR were broadly similar with larger error values in HR change images. [ABSTRACT FROM AUTHOR]

Protected areas are experiencing increased levels of human pressure. To enable appropriate conservation action, it is critical to map and monitor changes in the type and extent of land cover/use and habitat classes, which can be related to human pressures over time. Satellite Earth observation (EO) data and techniques offer the opportunity to detect such changes. Yet association with field information and expert interpretation by ecologists is required to interpret, qualify and link these changes to human pressure. There is thus an urgent need to harmonize the technical background of experts in the field of EO data analysis with the terminology of ecologists, protected area management authorities and policy makers in order to provide meaningful, context-specific value-added EO products. This paper builds on the DPSIR framework, providing a terminology to relate the concepts of state, pressures, and drivers with the application of EO analysis. The type of pressure can be inferred through the detection of changes in state (i.e. changes in land cover and/or habitat type and/or condition). Four broad categories of changes in state are identified, i.e. land cover/habitat conversion, land cover/habitat modification, habitat fragmentation and changes in landscape connectivity, and changes in plant community structure. These categories of change in state can be mapped through EO analyses, with the goal of using expert judgement to relate changes in state to causal direct anthropogenic pressures. Drawing on expert knowledge, a set of protected areas located in diverse socio-ecological contexts and subject to a variety of pressures are analysed to (a) link the four categories of changes in state of land cover/habitats to the drivers (anthropogenic pressure), as relevant to specific target land cover and habitat classes; (b) identify (for pressure mapping) the most appropriate spatial and temporal EO data sources as well as interpretations from ecologists and field data useful in connection with EO data analysis. We provide detailed examples for two protected areas, demonstrating the use of EO data for detection of land cover/habitat change, coupled with expert interpretation to relate such change to specific anthropogenic pressures. We conclude with a discussion of the limitations and feasibility of using EO data and techniques to identify anthropogenic pressures, suggesting additional research efforts required in this direction. [ABSTRACT FROM AUTHOR]

Traditionally, analyses of relationships between amphibians and habitat focused on breeding environments (i.e., pond features) more than on the features of the surrounding environment. Nevertheless, for most amphibians the terrestrial phase is longer than the aquatic phase, and consequently landscape features (i.e., habitat mosaics) may have an important role for modelling amphibian distribution. There were different aims in this analysis. Firstly, we compared the effectiveness of the information provided by land cover/use (LC/LU) classes and habitat classes defined according to a new habitat taxonomy named General Habitat Category (GHC), which is based on the concept of biological forms of dominant vegetation and class naturalness. The GHC map used was obtained from a pre-existing validated LC/LU map, by integrating spectral and spatial measurements from very high resolution Earth observation data according to ecological expert rules involving concepts related to spatial and temporal relationships among LC/LU and habitat classes. Then, we investigated the importance for amphibians of the landscape surrounding ponds within the Italian Alta Murgia National Park. The work assessed whether LC/LU classes in pond surrounds are important for the presence/absence of amphibians in this area, and identified which classes are more important for amphibians. The results obtained can provide useful indications to management strategies aiming at the conservation of amphibians within the study area. An information-theoretic approach was adopted to assess whether GHC maps allow to improve the performance of species distribution models. We used the Akaike's Information Criterion (AICc) to compare the effectiveness of GHC categories versus LC/LU categories in explaining the presence/absence of pool frogs. AICc weights suggest that GHC categories can better explain the distribution of frogs, compared to LC/LU classes. [ABSTRACT FROM AUTHOR]

To support decisions relating to the use and conservation of protected areas and surrounds, the EU-funded BIOdiversity multi-SOurce monitoring System: from Space TO Species (BIO_SOS) project has developed the Earth Observation Data for HAbitat Monitoring (EODHaM) system for consistent mapping and monitoring of biodiversity. The EODHaM approach has adopted the Food and Agriculture Organization Land Cover Classification System (LCCS) taxonomy and translates mapped classes to General Habitat Categories (GHCs) from which Annex I habitats (EU Habitats Directive) can be defined. The EODHaM system uses a combination of pixel and object-based procedures. The 1st and 2nd stages use earth observation (EO) data alone with expert knowledge to generate classes according to the LCCS taxonomy (Levels 1 to 3 and beyond). The 3rd stage translates the final LCCS classes into GHCs from which Annex I habitat type maps are derived. An additional module quantifies changes in the LCCS classes and their components, indices derived from earth observation, object sizes and dimensions and the translated habitat maps (i.e., GHCs or Annex I). Examples are provided of the application of EODHaM system elements to protected sites and their surrounds in Italy, Wales (UK), the Netherlands, Greece, Portugal and India. [ABSTRACT FROM AUTHOR]

Monitoring the status and future trends in biodiversity can be prohibitively expensive using ground-based surveys. Consequently, significant effort is being invested in the use of satellite remote sensing to represent aspects of the proximate mechanisms (e.g., resource availability) that can be related to biodiversity surrogates (BS) such as species community descriptors. We explored the potential of very high resolution (VHR) satellite Earth observation (EO) features as proxies for habitat structural attributes that influence spatial variation in habitat quality and biodiversity change. In a semi-natural grassland mosaic of conservation concern in southern Italy, we employed a hierarchical nested sampling strategy to collect field and VHR-EO data across three spatial extent levels (landscape, patch and plot). Species incidence and abundance data were collected at the plot level for plant, insect and bird functional groups. Spectral and textural VHR-EO image features were derived from a Worldview-2 image. Three window sizes (grains) were tested for analysis and computation of textural features, guided by the perception limits of different organisms. The modelled relationships between VHR-EO features and BS responses differed across scales, suggesting that landscape, patch and plot levels are respectively most appropriate when dealing with birds, plants and insects. This research demonstrates the potential of VHR-EO for biodiversity mapping and habitat modelling, and highlights the importance of identifying the appropriate scale of analysis for specific taxonomic groups of interest. Further, textural features are important in the modelling of functional group-specific indices which represent BS in high conservation value habitat types, and provide a more direct link to species interaction networks and ecosystem functioning, than provided by traditional taxonomic diversity indices. [ABSTRACT FROM AUTHOR]

Modelling the empirical relationships between habitat quality and species distribution patterns is the first step to understanding human impacts on biodiversity. It is important to build on this understanding to develop a broader conceptual appreciation of the influence of surrounding landscape structure on local habitat quality, across multiple spatial scales. Traditional models which report that ‘habitat amount’ in the landscape is sufficient to explain patterns of biodiversity, irrespective of habitat configuration or spatial variation in habitat quality at edges, implicitly treat each unit of habitat as interchangeable and ignore the high degree of interdependence between spatial components of land-use change. Here, we test the contrasting hypothesis, that local habitat units are not interchangeable in their habitat attributes, but are instead dependent on variation in surrounding habitat structure at both patch- and landscape levels. As the statistical approaches needed to implement such hierarchical causal models are observation-intensive, we utilise very high resolution (VHR) Earth Observation (EO) images to rapidly generate fine-grained measures of habitat patch internal heterogeneities over large spatial extents. We use linear mixed-effects models to test whether these remotely-sensed proxies for habitat quality were influenced by surrounding patch or landscape structure. The results demonstrate the significant influence of surrounding patch and landscape context on local habitat quality. They further indicate that such an influence can be direct, when a landscape variable alone influences the habitat structure variable, and/or indirect when the landscape and patch attributes have a conjoined effect on the response variable. We conclude that a substantial degree of interaction among spatial configuration effects is likely to be the norm in determining the ecological consequences of habitat fragmentation, thus corroborating the notion of the spatial context dependence of habitat quality. [ABSTRACT FROM AUTHOR]

Habitat mapping is a core element in numerous tasks related to sustainability management, conservation planning and biodiversity monitoring. Land cover classifications, extracted in a timely and area-extensive manner through remote sensing data, can be employed to derive habitat maps, through the use of domain expert knowledge and ancillary information. However, complete information to fully discriminate habitat classes is rarely available, while expert knowledge may suffer from uncertainty and inaccuracies. In this study, a rule-based classification methodology for habitat mapping through the use of a pre-existing land cover map and remote sensing data is proposed to deal with uncertainty, missing information, noise afflicted data and inaccurate rule thresholds. The use of the Dempster–Shafer theory of evidence is introduced in land cover to habitat mapping, in combination with fuzzy logic. The framework is able to handle lack of information, by considering composite classes, when necessary data for the discrimination of the constituting single classes is missing, and deal with uncertainty expressed in domain expert knowledge. In addition, a number of fuzzification schemes are proposed to be incorporated in the methodology in order to increase its performance and robustness towards noise afflicted data or inaccurate rule thresholds. Comparison with reference data reveals the improved performance of the methodology and the efficient handling of uncertainty in expert rules. The further scope is to provide a robust methodology readily transferable and applicable to similar sites in different geographic regions and environments. Although developed for habitat mapping, the proposed rule-based methodology is flexible and generic and may be well extended and applied in various classification tasks, aiming at handling uncertainty, missing information and inaccuracies in data or expert rules. [ABSTRACT FROM AUTHOR]

Abstract: Monitoring protected areas and their surrounds at local to regional scales is essential given their vulnerability to anthropogenic pressures, including those associated with climatic fluctuation, and important for management and fulfilment of national and international directives and agreements. Whilst monitoring has commonly revolved around field data, remote sensing can play a key role in establishing baselines of the extent and condition of habitats and associated species diversity as well as quantifying losses, degradation or recovery associated with specific events or processes. Landsat images constitute a major data source for habitat monitoring, capturing broad scale information on changes in habitat extent and spatial patterns of fragmentation that allow disturbances in protected areas to be identified. These data are, however, less able to provide information on changes in habitat quality, species distribution and fine-scale disturbances, and hence data from other spaceborne optical sensors are increasingly being considered. Very High Resolution (VHR) optical datasets have been exploited to a lesser extent, partly because of the relative recency of spaceborne observations and challenges associated with obtaining and routinely extracting information from airborne multi-spectral and hyperspectral datasets. The lack of a shortwave infrared band in many VHR datasets and provision of too much detail (e.g., shadows within and from landscape objects) also present challenges in some cases. Light Detection and Ranging (LiDAR) and Synthetic Aperture Radar (SAR) data, particularly when used synergistically with optical data, have benefited the detection of changes in the three-dimensional structure of habitats. This review shows that remote sensing has a strong, yet underexploited potential to assist in the monitoring of protected areas. However, the data generated need to be utilized more effectively to enable better management of the condition of protected areas and their surrounds, prepare for climate change, and assist planning for future landscape management. [Copyright &y& Elsevier]