Search

The combustion phenomenon is characterized by rapid self-sustaining reactions, which can occur in the solid, liquid, or gas phase. Specific types of these reactions are used to produce valuable materials by different combustion synthesis (CS) routes. In this article, all three CS approaches, i.e. solid-phase, solution, and gas-phase flame, are reviewed to demonstrate their attractiveness for fabrication of zero-, one-, two-, and three-dimensional nanostructures of a large variety of inorganic compounds. The review involves five sections. First, a brief classification of combustion synthesis methods is given along with the scope of the article. Second, the state of art in the field of solid-phase combustion synthesis is described. Special attention is paid to the relationships between combustion parameters and structure/properties of the produced nanomaterials. The third and fourth sections describe details for controlling material structures through solution combustion synthesis and gas-phase flame synthesis, respectively. A variety of properties (e.g., thermal, electronic, electrochemical, and catalytic) associated with different types of CS nanoscale materials are discussed. The conclusion focuses on the most promising directions for future research in the field of advanced nanomaterial combustion synthesis. [ABSTRACT FROM AUTHOR]

Efficient hydrogen production relies on cost-effective and durable non-noble metal electrocatalysts for the hydrogen evolution reaction (HER). In this work, a liquid metal-assisted solid-flame combustion synthesis (SF-CS) method was used to create transition metal carbide TMC) nanocrystals with exposed facets. The TMCs include TiC, VC, NbC, TaC, Ta 2 C, WC, and Mo 2 C. In acidic solutions, the TMC nanocrystals show enhanced conductivity and superior HER performance, as evidenced by their lower Tafel slope, higher current density, and decreased overpotential. In particular, Mo 2 C nanocrystals exhibit an overpotential of 95 mV and a Tafel slope of 26 mV dec−1. These findings highlight a noteworthy improvement over previously reported nanostructures in recent years in terms of the HER properties of Mo 2 C with particular facets. This improvement is attributed to the unique surface characteristics, such as energy and active sites, which are impacted by various factors and require more investigation to meet the intended goals. [Display omitted] [ABSTRACT FROM AUTHOR]

Abstract: Zirconium-based ceramics and composites such as ZrC, ZrB2, ZrC–SiC, ZrB2–SiC–ZrC, and ZrB2–SiC–ZrC–ZrSi were synthesized in fine powder form via combustion synthesis (CS) using ZrSiO4, Mg, C, B, and NaCl as raw materials. Temperature distributions in the combustion wave were measured by thermocouples and used to estimate the combustion temperature and wave propagation velocity. The influence of the NaCl mole fraction on the combustion parameters, phase composition, and particle size of the composite powders was investigated. The experimental results revealed that the combustion temperature and particle size of the composites have a stable decreasing tendency with increase in the NaCl mole fraction in the starting mixture. It was found that near the combustion limit (1.5mol NaCl), the combustion temperature drops below 1500°C and the particle size reaches the nanometer scale. [Copyright &y& Elsevier]

In this study, a single-step combustion process for the synthesis 1-D, 2-D, and 3-D micro and nanostructures of AlN was developed. The structures were grown by combustion of Al+ k AlF 3 (or ZnF 2 )+ m NH 4 Cl reaction mixture under 4.0 MPa nitrogen atmosphere. Based on experimental data, the growth conditions, morphology, and composition, optical, and thermal properties of AlN micro and nanostructures were determined. The formation of structures was associated with the combustion temperature, liquid and gas-phase reactions, and the type of additives used in the experiments. The new insight, we gleaned from this study may help in the selective growth of AlN micro and nanostructures of different morphology, enhancing their functionality. [ABSTRACT FROM AUTHOR]

In this study, we examined the effect of potassium perchlorate (KClO 4 ) and magnesium hydroxide (Mg(OH) 2 ) additives on the combustion behavior of a ZrO 2  + 2Mg mixture to produce a fine powder of zirconium metal. The results of thermodynamic analysis and experiments imply that nearly 0.04 mol of KClO 4 is needed to initiate a combustion reaction in the ZrO 2  + 2Mg system. As the amount of KClO 4 increases from 0.04 to 0.1 mol, the combustion temperature increases from 1250 to 1850 °C. This results in formation of fine zirconium powder with a typical particle size of less than 5 µm, and with 1.4–2.2 wt% residual oxygen. Subsequent reduction of particle size to 100–500 nm, and oxygen content to <1.0 wt% was achieved by adding Mg(OH) 2 . The as-prepared Zr powder was mixed with nitrocellulose and printed onto 10–100 µm thin-layers to study their burning stability. The wave propagation in a thin layer was on the order of 0.35–30 cm/s, which is suitable for applications requiring localized power generation. [ABSTRACT FROM AUTHOR]

The exothermic reduction of oxides mixture (MoO 3 +2SiO 2 ) by magnesium in NaF melt enables the synthesis of nanocrystalline MoSi 2 powders in near-quantitative yields. The combustion wave with temperature of about 1000–1200 °C was recorded in highly diluted by NaF starting mixtures. The by-products of combustion reaction (NaF and MgO) were subsequently removed by leaching with acid and washing with water. The as-prepared MoSi 2 nanopowder composed of spherical and dendritic shape particles was consolidated using the spark plasma sintering method at 1200–1500 °C and 50 MPa for 10 min. The result was dense compacts (98.6% theoretical density) possessing submicron grains and exhibiting hardness of 8.74–12.92 GPa. [ABSTRACT FROM AUTHOR]

This study deals with combustion behavior of B 2 O 3 /Mg/NH 4 Cl/C complex systems for the synthesis of amorphous boron (B), boron carbide (B 4 C), and boron nitride (BN) nanostructures. The raw mixtures used in the experiments were prepared on the base of a B 2 O 3 –Mg precursor mixture, which is sufficiently exothermic to maintain a self-propagating regime of the combustion reaction. Thermodynamic analysis of the combustion temperatures and experimental validation indicate that the 1000–1500 °C temperature range is very effective for synthesizing the nanostructures of B, B 4 C, and BN. It was found that B-containing functional nanostructures are mainly spherical nanoparticles (B) or nanosheets (B 4 C, BN). The phase composition and microstructural characteristics of the final products were evaluated based on the combustion temperature and solid/liquid phase changes. [ABSTRACT FROM AUTHOR]

Hollow carbon nanospheres as potential cathode materials for lithium-sulfur (Li-S) batteries were successfully synthesized using a metathesis reaction between sodium azide and halogen polymer. The reaction was driven by thermal heat from the exothermic recombination of Na + and Cl − (or F − ) ions into NaCl (or NaF) salts. The result was an increase of the overall system temperature up to 1320–1750 °C followed by the simultaneous formation of sodium halide-carbon core–shell nanoparticles. Therefore, hollow carbon nanospheres with diameter and shell thickness of ∼50–500 nm and ∼10–50 nm, respectively, were produced after water washing of the reaction product. The composite cathode materials for Li-S batteries were manufactured by infiltrating sulfur into the hollow core of nanospheres. The electrochemical cycling showed discharge capacity of ∼700 mAh g −1 (after 100 cycles) at 0.5 C current rate which is more than ∼2.4 times larger than that for the sulfur/carbon black composites prepared by the same technique. The enhancement of battery performance was attributed to the well-organized and unique 3D structure of hollow carbon, enabling better utilization of sulfur. [ABSTRACT FROM AUTHOR]

A melt-assisted solid flame synthesis approach was applied to synthesize boron nanoparticles in argon gas and air atmospheres. For this purpose, we investigated the characteristics of a thermally induced combustion wave in B 2 O 3 + α Mg mixtures ( α = 1.0–1.5 mol) in argon and air atmospheres. Utilizing stoichiometrically insufficient amounts of magnesium ensured that a large portion of molten B 2 O 3 remained in the sample, which reduced the combustion parameters and favored the formation of boron nanoparticles. Under these conditions the combustion temperature and burning velocity were controlled in the range of 1300–1580 °C and 0.065–0.18 cm/s, respectively, and boron nanoparticles in a ∼20–200 nm size range were obtained. The characteristics of boron nanoparticles (morphology, purity, specific surface area, oxidation activity, etc.) were analyzed and a reaction pathway leading to boron nanoparticles synthesis was proposed. [ABSTRACT FROM AUTHOR]

Abstract: Herein, we present the low-temperature solid-phase combustion synthesis of tantalum carbide (TaC), TaC/tantalum silicide (TaSi2), and TaC/tantalum boride (TaB) nanoparticles by the silicothermic reduction of potassium fluorotantalate (K2TaF7) in the presence of carbon, boron, and polytetrafluoroethylene (PTFE, 1 [1] BJH, Barrett–Joyner–Halenda; HRTEM, high-resolution transmission electron microscopy; MMC, metal matrix composite; PFTE, polyfluorotetraethylene; PTFE; polytetrafluoroethylene; RF, radio frequency; SAED, selected area electron diffraction pattern; T c , combustion temperature; TEM, transmission electron microscopy; U c , combustion velocities; XRD, X-ray diffractometer. (C2F4) n ). The temperature–time profiles of the combustion wave were measured by thermocouples and used to calculate the combustion parameters: temperature and wave velocity. The flame temperature was found to increase with the concentration of PTFE. Using high resolution transmission electron microscopy, a homogeneous distribution of highly crystalline nanoparticles was observed. The thermal–kinetic activation energy, the heat released during each of the individual reactions, and the chemical mechanism of the overall combustion process are discussed with respect to the final products. [Copyright &y& Elsevier]

Abstract: Zirconium has a low absorption cross-section for neutrons, which makes it an ideal material for use in nuclear reactor applications. However, hafnium typically contained in zirconium causes it to be far less useful for nuclear reactor materials because of its high neutron-absorbing properties. In the present study, a novel effective method has been developed for the production of hafnium-free zirconium. The process includes two main stages: magnesio-thermic reduction of ZrSiO4 under a combustion mode, to produce zirconium silicide (ZrSi), and recovery of hafnium-free zirconium by molten-salt electrorefining. It was found that, depending on the electrorefining procedure, it is possible to produce zirconium powder with a low hafnium content: 70ppm, determined by ICP-AES analysis. [Copyright &y& Elsevier]

Abstract: An experimental study on the preparation of zirconium silicides was conducted using ZrSiO4–Mg, ZrSiO4–SiO2–Mg and ZrSiO4–ZrO2–Mg powder mixtures by the combustion synthesis (CS) technique. Test specimens having different composition ratios including Zr:Si=1:2, 1:1, 5:4, 5:3, 2:1, and 3:1 were employed in this study. Temperature profiles relative to all the starting compositions were measured using thermocouples, and the values of the combustion parameters (combustion temperature and wave velocity) were estimated using the same. The formation of ZrSi, ZrSi2, Zr5Si3, and Zr3Si2 phases was confirmed by X-ray analysis; however, only ZrSi was produced as a single-phase product. The proposed method was also extended to synthesize spherical ZrSi particles having mean diameters of 0.2–3.0μm. A comprehensive chemical pathway to describe the sequence of chemical reactions in the combustion wave was also proposed. [ABSTRACT FROM AUTHOR]

The present study demonstrates the synthesis of fine hafnium (Hf) metal powders via a chemically activated combustion synthesis (CS) approach, which develops temperatures in the range of 1000–1600 °C. The current CS approach can be employed to obtain Hf powders with a single-crystalline hexagonal close-packed (hcp) structure in addition to high compositional uniformity and average particle sizes ranging from 0.05 to 2.0 μm. The mechanism of Hf particle formation can be understood by analyzing the process thermodynamics, including adiabatic temperatures and equilibrium reaction phases. In addition, analytical methods, including X-ray diffraction, SEM/TEM BET, FTIR, and oxygen analysis, were employed to characterize the synthesized Hf powders. Theoretical analysis was also conducted to predict the oxygen content according to Hf particle size. To the author's best knowledge, this work is the first known report demonstrating the preparation of hafnium micro- and nanopowders by the combustion synthesis method. • The combustion of HfO 2 +0.08KClO 4 + k Mg systems was studied for k = 2.7–7. • Synthesis temperatures ranging from 1570 to 1000 °C were recorded. • Hf powder with particle sizes of 0.05–2.0 μm and 0.8–2.0 wt% oxygen was obtained. • Deoxidation using a Ca/Mg alloy powder produced Hf metal with less than 0.1 wt% O 2. • A theoretical model, for predicting oxygen concentration in Hf particles is proposed. [ABSTRACT FROM AUTHOR]