Search

In the realm of food waste recycling, industrial suberoligneous by‐products like cork and peels, pose a challenge for value‐added conversion, primarily due to their intricate structures. This study introduces an innovative approach by utilizing recycled cork as a prime example of repurposing food waste to create a reusable and durable packaging paper. Notably, the manufacturing process of this cork‐based paper avoids the generation of waste liquids from lignin removal, effectively alleviating concerns related to liquid waste pollution. The resulting packaging paper demonstrates remarkable printability, readability, and erasability while offering reusability. Its performance can be fine‐tuned through pH value adjustments. Moreover, this packaging paper exhibits outstanding antioxidative properties and barrier properties, seamlessly integrating superb UV‐blocking proficiency and heightened visible transparency, rendering it highly appealing for sustainable food packaging applications. [ABSTRACT FROM AUTHOR]

Atmospheric pressure plasma polymerization represents a promising coating technology, addressing drawbacks of traditional processes (solvent use, multistep procedures, etc.) while enabling deposition of thin cross‐linked polymer layers with high contour fidelity. We address technological challenges with a novel plasma device that integrates multiple plasma source benefits and investigate the suitability of two plant‐based precursors, chia and tung oil, for plasma polymerization to hydrophobize glass and paper. Chia oil enables the deposition of thin, covalently bonded hydrophobic polymer layers. Such coatings have diverse applications especially inside the paper industry, where water repellents in the form of internal and surface sizing have always been an essential functionalization step. Using bio‐based precursors and reducing extra chemicals contributes to substituting fossil‐based or harmful substances. [ABSTRACT FROM AUTHOR]

Paper manufacturers have long used silicone as the coating agent for release liners. However, silicone‐based release paper is very difficult to recycle due to covalent bonds between silicone and fibers. The most suitable solution to overcome this problem is to use alternative coating materials with adequate release properties, provided that they can be easily repulped in typical paper recycling facilities. We proposed a coating agent composed of phosphate esters and dimethylacetamide in order to manufacture a recyclable and efficient release paper. Analyses carried out on coated sheets showed that phosphate esters allowed the formation of a surface with adequate release properties (low peeling force and surface free energy). In addition, the residual adhesion values obtained with phosphate esters confirmed that they are well anchored on the backing paper surface, thus limiting the mass transfer to the adhesive tape. [ABSTRACT FROM AUTHOR]

Accurately assessing the color quality of printed products becomes intricate when optical brightening agents (OBAs) are introduced in papers, as diverse interactions occur among different ink pigments and papers containing OBAs due to variations in ink formulation chemistries. Specifically, alkali‐based pigments, commonly used as spot colors, are carefully formulated to ensure consistency across production batches. The presence of OBAs, which absorb ultraviolet light and emit it in the visible spectrum, significantly affects color perception and accuracy on paper when interacting with these inks. This research marks an initial investigation into how OBAs in paper influence the color accuracy of five distinct alkali‐based spot color paste inks using a Little Joe ink proofer. The research examines the physical, optical, and colorimetric characteristics of two paper samples‐one with OBA and one without‐ and analyzes the colorimetric changes occurring during the ink drying process. The results indicate that reflex blue, purple, and violet spot colors achieved acceptable delta E (ΔE00) value of below 3 on non‐OBA paper, with rubine red being on the borderline at 3.1 after 48 h. In contrast, purple, rhodamine red and violet achieved acceptable ΔE00 below 3 on high OBA paper. The distinct behavior exhibited by certain inks led to the conclusion that achieving a consistent proofing procedure across diverse alkali‐based ink formulations is impractical. [ABSTRACT FROM AUTHOR]

The global overabundance of electronic waste and ever‐increasing concerns regarding the energy‐and material‐intensive manufacturing processes associated with traditional electronics are driving the development of solution‐processed, degradable electronics. Of note, the industry‐dominating prevalence of harmful lead‐based materials in sensing and actuating devices drives the push for more eco‐friendly solution‐processed piezoelectric systems. Yet current ecofriendly multi‐material printing processes are limited by both the conventional challenges of multilayer processes as well as the low‐temperature thermal constraints of biodegradable materials. Herein, a novel approach for fabricating fully printed, sustainable piezoelectric transducers on paper substrates is presented. Low‐temperature screen‐printing processes are used to integrate non‐toxic KNbO3 layers with degradable carbon‐ or zinc‐based conductive inks into devices. The influence of electrode material on device characteristics is assessed, with effective piezoelectric coefficients reported as high as 4.6 pC N−1 and 5.1 pC N−1 for devices with carbon and zinc electrodes respectively. The potential of the developed technology is then demonstrated through the first‐ever instance of fully printed piezoelectric force sensors and acoustic speakers comprised entirely of green materials. By demonstrating entirely printable green piezoelectric devices compatible with various electrode materials, this work serves as a step towards developing more complex sustainable piezoelectric technologies in the future. [ABSTRACT FROM AUTHOR]

The global overabundance of electronic waste and ever‐increasing concerns regarding the energy‐and material‐intensive manufacturing processes associated with traditional electronics are driving the development of solution‐processed, degradable electronics. Of note, the industry‐dominating prevalence of harmful lead‐based materials in sensing and actuating devices drives the push for more eco‐friendly solution‐processed piezoelectric systems. Yet current ecofriendly multi‐material printing processes are limited by both the conventional challenges of multilayer processes as well as the low‐temperature thermal constraints of biodegradable materials. Herein, a novel approach for fabricating fully printed, sustainable piezoelectric transducers on paper substrates is presented. Low‐temperature screen‐printing processes are used to integrate non‐toxic KNbO3 layers with degradable carbon‐ or zinc‐based conductive inks into devices. The influence of electrode material on device characteristics is assessed, with effective piezoelectric coefficients reported as high as 4.6 pC N−1 and 5.1 pC N−1 for devices with carbon and zinc electrodes respectively. The potential of the developed technology is then demonstrated through the first‐ever instance of fully printed piezoelectric force sensors and acoustic speakers comprised entirely of green materials. By demonstrating entirely printable green piezoelectric devices compatible with various electrode materials, this work serves as a step towards developing more complex sustainable piezoelectric technologies in the future. [ABSTRACT FROM AUTHOR]

Identifying the factors that influence the citation of articles helps authors improve the impact and reach of their research. Analysis of publications in the Journal of Fish Biology between 2008 and 2021 revealed that variables such as the number of keywords, abstract length, number of authors, and page length were associated with higher impact papers. These trends applied to both review and regular papers. These findings suggest that papers that are more informative, have higher numbers of authors, and have more keywords are more likely to be cited. Adoption of some simple "best‐practice" behaviors can improve the likelihood that a paper is cited. [ABSTRACT FROM AUTHOR]